Error when re-loading QuickTime

Recevied msg stating I needed to unload and load QuickTime. Unload appeared sucessful but nowreceiving the following error when trying to download Quicktime:
c:\Documents and Settings\Owner.YOUR-B54A0F8E5B\Local Settings\Temporary Internet Files\Content IE5\N6PX1OCQ\iTunesSetup[1].exe is not a valid win32 application
What do I need to do to get it to load?

Odd message error. Owner.Your-B54A0F8E5B, this number could just be from when the computer was new before the computer itself was giving a name, if it ever was.
The N6PX10CQ would be one of the directories to the Temporary Internet Files folder. I'd try deleting the contents of that folder and anything in the Temp folder as well that isn't neccessary. To see if that brings any luck.

Similar Messages

Error when Bulk load hierarchy data

Hi,
While loading P6 Reporting databases following message error appears atthe step in charge of Bulk load hierarchy data into ODS.
<04.29.2011 14:03:59> load [INFO] (Message) - === Bulk load hierarchy data into ODS (ETL_LOADWBSHierarchy.ldr)
<04.29.2011 14:04:26> load [INFO] (Message) - Load completed - logical record count 384102.
<04.29.2011 14:04:26> load [ERROR] (Message) - SqlLoaderSQL LOADER ACTION FAILED. [control=D:\oracle\app\product\11.1.0\db_1\p6rdb\scripts\DATA_WBSHierarchy.csv.ldr] [file=D:\oracle\app\product\11.1.0\db_1\p6rdb\temp\WBSHierarchy\DATA_WBSHierarchy.csv]
<04.29.2011 14:04:26> load [INFO] (Progress) - Step 3/9 Part 5/6 - FAILED (-1) (0 hours, 0 minutes, 28 seconds, 16 milliseconds)
Checking corresponding log error file (see below) I see that effectively some records are rejected. Question is: How could I identify the source of the problem and fix it?
QL*Loader: Release 11.1.0.6.0 - Production on Mon May 2 09:03:22 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Control File: DATA_WBSHierarchy.csv.ldr
Character Set UTF16 specified for all input.
Using character length semantics.
Byteorder little endian specified.
Data File: D:\oracle\app\product\11.1.0\db_1\p6rdb\temp\WBSHierarchy\DATA_WBSHierarchy.csv
Bad File: DATA_WBSHierarchy.bad
Discard File: none specified
+(Allow all discards)+
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 64 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Table WBSHIERARCHY, loaded from every logical record.
Insert option in effect for this table: APPEND
TRAILING NULLCOLS option in effect
Column Name Position Len Term Encl Datatype
PARENTOBJECTID FIRST * WHT CHARACTER
PARENTPROJECTID NEXT * WHT CHARACTER
PARENTSEQUENCENUMBER NEXT * WHT CHARACTER
PARENTNAME NEXT * WHT CHARACTER
PARENTID NEXT * WHT CHARACTER
CHILDOBJECTID NEXT * WHT CHARACTER
CHILDPROJECTID NEXT * WHT CHARACTER
CHILDSEQUENCENUMBER NEXT * WHT CHARACTER
CHILDNAME NEXT * WHT CHARACTER
CHILDID NEXT * WHT CHARACTER
PARENTLEVELSBELOWROOT NEXT * WHT CHARACTER
CHILDLEVELSBELOWROOT NEXT * WHT CHARACTER
LEVELSBETWEEN NEXT * WHT CHARACTER
CHILDHASCHILDREN NEXT * WHT CHARACTER
FULLPATHNAME NEXT 8000 WHT CHARACTER
SKEY SEQUENCE (MAX, 1)
value used for ROWS parameter changed from 64 to 21
Record 14359: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 14360: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 14361: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 27457: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 27458: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 27459: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 38775: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 38776: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 38777: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 52411: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 52412: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 52413: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 114619: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 114620: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 127921: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 127922: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 164588: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 164589: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 171322: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 171323: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 186779: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 186780: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 208687: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 208688: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 221167: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 221168: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 246951: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 246952: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Table WBSHIERARCHY:
+384074 Rows successfully loaded.+
+28 Rows not loaded due to data errors.+
+0 Rows not loaded because all WHEN clauses were failed.+
+0 Rows not loaded because all fields were null.+
Space allocated for bind array: 244377 bytes(21 rows)
Read buffer bytes: 1048576
Total logical records skipped: 0
Total logical records read: 384102
Total logical records rejected: 28
Total logical records discarded: 0
Run began on Mon May 02 09:03:22 2011
Run ended on Mon May 02 09:04:07 2011
Elapsed time was: 00:00:44.99

Hi Mandeep,
Thanks for the information.
But still it doesnot seem to work.
Actally, i have Group ID and Group Name as display field in the Hiearchy table.
Group ID i have directly mapped to Group ID.
I have created a Split Hierarchy of Group Name and mapped it.
I have also made all the options configurations as per your suggestions, but it doenot work still.
Can you please help.
Thanks,
Priya.

General error when exporting to Quicktime from FCE

I've built a slideshow with still photos, text, and audio. I've done this at least 20 times. When I start exporting to Quicktime, as I want to burn a dvd in iDVD, the export stops at 27% completed and I get a "General Error". there is no explanation. I've rendered the single sequence many times and it says ok. It plays fine in FCE but won't export to Quicktime. How do I correct the problem?

I think I had the same problem that you are now having. I would get unexpected errors when trying to:
1) Log and Transfer videos to external hard drives.
2) Save my exports to an external Hard Drive.
3) Copy large video files to the External Hard Drive.
Assuming that you are using an external hard drive, chances are that isn't formatted correctly. It cannot be formatted in FAT32 or else large files (usually video) over 4GB cannot transfer. It may be that the file you are trying to export is larger than 4GB. If it is currently formatted FAT32 it needs to be formatted to Mac OS Extended. Hope I was of some help.

Error when i loading data

Hi,
when i load the 3.x master data text throgh infopackage to PSA i got error as Caller 09 contains an error message.
The detailed messages--
 Diagnosis
 In the source system, there is no transfer structure available for
 InfoSource 0STOR_LOC_TEXT .
System Response
 The data transfer is terminated.
Procedure
 In the Administrator Workbench, regenerate from this source system the
 transfer structure for InfoSource 0STOR_LOC_TEXT .
Please urgent..
Thanks in Advance

Hi,
Thanks for quick response..
now i am not gettng above error for 0plant_attr, another error arises after DTP
in details tab it shows as
Exceptions in Substep: Extraction Completed
is shows program as
method raise_step_failed_callstack.
types: begin of lty_s_callstack,
 mainprogram like sy-repid,
 include like sy-repid,
 line type i,
 eventtype type dbglevtype,
 event type dbglevent,
 flag_system type c length 1,
 end of lty_s_callstack.
data: l_t_mycallstack type table of lty_s_callstack.
data: l_s_mycallstack type lty_s_callstack.
call 'ABAP_CALLSTACK' id 'DEPTH' field 99
 id 'CALLSTACK' field l_t_mycallstack. "#EC CI_CCALL
data: l_s_callstack type abap_callstack_line,
 l_t_callstack type abap_callstack.
loop at l_t_mycallstack into l_s_mycallstack from 2.
 move-corresponding l_s_mycallstack to l_s_callstack.
 append l_s_callstack to l_t_callstack.
endloop.
raise exception type cx_rs_step_failed
 exporting
 textid = i_textid
 previous = i_previous
 object = i_object
 key = i_key
 steptext = i_steptext
 t_callstack = l_t_callstack.
endmethod.
how can i rectify the error

NOWAIT error when sql loading

I've this process that would perform multiple sql load into the same table with append option. It was working fine and then I get this error in 1 of my load.
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Continuation: none specified
Path used: Direct
Table OWNER.SCORES_TEMP, loaded from every logical record.
Insert option in effect for this table: APPEND
TRAILING NULLCOLS option in effect
Column Name Position Len Term Encl Datatype
ID FIRST * | O(") CHARACTER
HSE NEXT * | O(") CHARACTER
PROB NEXT * | O(") CHARACTER
MODEL NEXT * | O(") CHARACTER
SCORE_DATE NEXT * | O(") DATE YYYY-MM-DD
SQL*Loader-951: Error calling once/load initialization
ORA-00604: error occurred at recursive SQL level 1
ORA-00054: resource busy and acquire with NOWAIT specified
I;ve read that update could cause this error, but haven't found anything on sql loading. What to do?
Ku

Be sure that no one (tools, program, session, previous sqlldr session, etc ) are using the underlining table.
ciao

Error when exporting to QuickTime

Hello,
I've seen a few older posts dealing with this exact same problem, but I was wondering if there has been any new development/ideas to work around it.
I've been putting together a Keynote presentation with animations, video, and audio (all of it synchronized). To my surprise, when I tried to export it to QuickTime I got all sorts of errors. Removing the audio before exporting gets rid of the error, but if I load the generated QuickTime movie into iMovie and add the audio later, nothing is synchronized.
Has anybody found ways around it? I would have to throw away all the hours I've invested on this presentation.
Thanks and Regards,
Julian

Wow Kyn, that's quite an arsenal of resources! Thanks so much for sharing.
Unfortunately none of those suggestions did the trick. I have Keynote 3.0.2 just in case that makes a difference.
What I have found out though, is that the problem is related to slides that contain QuickTime movies. Following the suggestion from your last link, removing the slide that causes problems and (painfully) re-creating it does help. However at some point the recreated slide also becomes "corrupted" and QuickTime export stops working. Quite frustrating...
One quick question...on the last link, when the author refers to the "speaker icon", where is that? I don't think I've ever seen that before...
Kind Regards,
Julian

Getting error when we loading the data to 0TCT_C01

When we are loading the delta loads to 0TCT_C01 cube , Load got failed saying that "Job terminated in source system --> Request set to red".
Below is the details abou the dump:
Runtime Errors         COMPUTE_INT_TIMES_OVERFLOW
Exception              CX_SY_ARITHMETIC_OVERFLOW
Date and Time          10/05/2009 09:56:36
Short text
     Whole number overflow on multiplication.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "CL_RSTCT_BIRS_EXTRACTION======CP" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Please do help me to solve this error.
Thanks in advance.
Regards,
Anil

Hi Anil,
Please check the below SAP Note:
Note 1323805 - 0TCT_DS01 run time error -COMPUTE_INT_TIMES_OVERFLOW
Hope this helps.
Veerendra.

Getting a security error when I load VueLink

When I try to load VueLink in my browser to check the status of the servlet, I get the following error...
exception
javax.servlet.ServletException: Error instantiating servlet class com.cimmetry.servlet.VueServlet
     org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
     org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298)
     org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:852)
     org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:588)
     org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489)
     java.lang.Thread.run(Thread.java:619)
root cause
java.lang.SecurityException: class "com.cimmetry.core.ObjectID"'s signer information does not match signer information of other classes in the same package
     java.lang.ClassLoader.checkCerts(ClassLoader.java:807)
     java.lang.ClassLoader.preDefineClass(ClassLoader.java:488)
     java.lang.ClassLoader.defineClassCond(ClassLoader.java:626)
     java.lang.ClassLoader.defineClass(ClassLoader.java:616)
     java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141)
     org.apache.catalina.loader.WebappClassLoader.findClassInternal(WebappClassLoader.java:2331)
     org.apache.catalina.loader.WebappClassLoader.findClass(WebappClassLoader.java:976)
     org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1451)
     org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1329)
     java.lang.Class.getDeclaredConstructors0(Native Method)
     java.lang.Class.privateGetDeclaredConstructors(Class.java:2389)
     java.lang.Class.getConstructor0(Class.java:2699)
     java.lang.Class.newInstance0(Class.java:326)
     java.lang.Class.newInstance(Class.java:308)
     org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
     org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298)
     org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:852)
     org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:588)
     org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489)
     java.lang.Thread.run(Thread.java:619)
Any Idea's?

Looks like a certificate error.
Check your cacerts file in C:\Program Files\jVue\jre\lib\security to ensure you have the proper entries if you are using SSL.

"General Error" when building from Quicktime Reference

Just a few weeks ago I exported an hour long video as a Quicktime Reference from Avid Media Composer 7, imported it into Encore and built it to a Blu-ray folder. Everything worked as it should. Today I had two 5 minute videos exported from Avid as QT Ref's, imported these into Encore, made them into timelines, checked the project and previewed and all seemed correct. I went to build and it almost immediately pulls up the error "General Error". I saved the project, closed Encore and tried again and still no luck.
I am using the same settings as before when making the QT refs from Avid (Digital mastering default, flatten video tracks, native dimensions [1920x1080], mixdown audio tracks as .wav, 96 kHz, 24 bit), the Avid codec I am using, and thus referencing, hasn't changed (Avid DNxHD 145) and my Encore project settings are the same as the last time I successfully made a disc using QT refs (Blu-ray authoring, H.264, 1920x1080 29.97, PCM audio, 30 Mbps). I am using a static menu in this project, just like the last time I successfully built. Before attempting to build, the videos and audio playback in Encore correctly and the project checks out fine.
Why would this be happening? The message provides absolutely no useful information -- just "General Error" -- so I have no clue what the underlying issue is.
Has anyone else experienced and overcome this phenomenon?

An error that is probably due to multiple causes.
Two things worth trying:
close the current project and "clean" the caches.
Reset Encore preferences.
What version of Encore?

Error when exporting as Quicktime

Help
This is really frustrating and baffling.
I have a flash project which consists of a .mov import with graphics mottions over the top.
First there was no sound when exporting the project as a swf
I then tried to export the project as a Quicktime .mov but got an error message "could not complete operation because of an unknown error"
What am I doing wrong?
I am using Flash 5.5

I tried the link and it didnt work so here is the url
http://www.4shared.com/file/NkeNX5Lp/Archive.html
<a href="http://www.4shared.com/file/NkeNX5Lp/Archive.html" target=_blank>Archive.zip</a>
[URL=http://www.4shared.com/file/NkeNX5Lp/Archive.html]Archive.zip[/URL]

Error when exporting with Quicktime

I'm having some problems exporting with Quicktime from iMove '08. Here are my settings:
(The highlighted portion says 20,000 kbits/sec)
I have exported using these settings before, but for some reason, it gives me error code -2002 when it finishes exporting now, and tells me that it can't export. Anyone know what error code -2002 is? I can't find it here or on Google. Exporting straight to m4v worked just fine.

I'm exporting at those dimensions because that's just where I had it set (lol). I didn't even realize it was HD until just now, but like I said, I put the lowest possible data rate (32 kbits/sec) and the smallest dimensions possible (160x120) and it still didn't work.
However, I had completely missed the fact that the audio wasn't being exported. I reset the audio settings and tried again on the smallest setting, and that worked. Thanks for your help!

Error when exporting from Quicktime Pro

I don't really like how any of the Adobe products export H.264 .mov files so my normal workflow that I've been doing for years is to export as a high quality MPEG4 and then open it in Quicktime and export as H.264 from there. I went to do this today and it gave me this error message "Export Controller has stopped working". When I click OK on that it gives me this error in the progress window:
http://screencast.com/t/N2ZjNjcz
I've tried this with multiple videos and got the same thing, as a test I tried exporting as MPEG4 and I got a similar error (different code). As I was typing this I tried Export For Web and got the same error. Any idea how to fix this?

There's another thread here discussing the same error message, though not in exactly the same circumstance:
http://discussions.apple.com/thread.jspa?threadID=2212899&tstart=0
Perhaps something in that thread will help you.
Good luck.
Message was edited by: Dave Sawyer

Error when execute Load Plan

Dear all,
When I tried to execute the Load Plan , I get this error:
ODI-1551 the dbms_lock acquisition faild with sql exception
OR06550: ????1?????7.
PL00201: identifier 'DBMS_LOCK' must be declared.
OR06550: ????1?????7.
PL/SQL statement ignored.
Thank you,

The link as below maybe helpful
dbms lock must be declared

Why have I an error when I load an external .swf?

Hello, everybody...
I have this error message when I try to load an external .swf into my .swf:
*** Violazione della sicurezza sandbox ***
SecurityDomain 'http://192.168.1.2/fms3/Logopedia/AnalisiVisiva.swf' ha cercato di accedere a un contesto incompatibile 'file:///C|/Documents%20and%20Settings/TOSHIBA%20SATELLITE/Desktop/Tesi%20Magistrale/Prog etti/VideoComm/VideoComm.swf'
SecurityError: Error #2070: Violazione della sicurezza sandbox: il chiamante http://192.168.1.2/fms3/Logopedia/AnalisiVisiva.swf non può accedere allo stage appartenente a file:///C|/Documents%20and%20Settings/TOSHIBA%20SATELLITE/Desktop/Tesi%20Magistrale/Proge tti/VideoComm/VideoComm.swf.
    at flash.display::Stage/requireOwnerPermissions()
    at flash.display::Stage/addEventListener()
    at fl.core::UIComponent/callLater()
    at fl.core::UIComponent/invalidate()
    at fl.controls::BaseButton/setMouseState()
    at fl.controls::BaseButton/mouseEventHandler()
My external .swf is a project that write on a server side text file the words that I write into textInput on client side. So I have an .asc file.
I use an Apache Web Server and FMS3.
Can someone helps me? Please.
Emiliano.

Hi gymtrainger55,
When having iTunes Store connectivity issues, the following articles provide the best solutions:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thanks,
Matt M.

Error when exporting from Quicktime

I have been trying to export sound from a sound only .mov file but I am getting the error :
Export Controller has stopped working
The problem started after I was able to export one file. Anybody know what the problem might be? Any help would be greatly appreciated.
Problem signature:
Problem Event Name: APPCRASH
Application Name: ExportController.exe
Application Version: 7.66.71.0
Application Timestamp: 4ba1a6fb
Fault Module Name: CoreAudioToolbox.dll
Fault Module Version: 7.9.2.0
Fault Module Timestamp: 4b8efb3c
Exception Code: c0000005
Exception Offset: 00273469
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 2057
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409

I have tried re-installing quicktime. Still no luck. I have also tried changing to safe mode in the preferences, again no luck. I have found out the error number from the exporter (progress bar thing) Error: 2147023174

Error when re-loading QuickTime

Similar Messages

Maybe you are looking for