Error When Refresh Formatted Data inside Excel Analyzer

I have build a Excel template and load up this to the BI Publisher Server. When I call this template after the log in works fine. When I refresh the data normal it works also fine, but when I try to refresh formatted Data I get the error "Error: This report does not support HTML as an output format." I will not use html output inside Excel, I will use the original Excel template with refreshed data.

Hi Tim,
The Refresh Formatted Data works on MS Excel 2003.
May need to check if its really supported on MS Office 2002.
Btw another question, is it possible to create an excel template without using Excel Analyzer?
Also when I used the generated excel file of Excel Analyzer as template, when the report is generated the data sheet sometimes is not filled with correct data or sometimes there is no data at all, even if the parameters used is the same as the one used in generating the original excel file using Excel Analyzer. This happens most of the time for reports with Concatenated Queries or SQL Queries using "CURSOR" to group a set of data. Note that on initial generation of excel file using Excel Analyzer, correct set of data is displayed. It is only when it is used as template and viewed/exported in Excel format that data is not properly loaded.
Please advise.
Thanks!
Uniz

Similar Messages

Refreshjob error when refreshing php data/services

Hey
I read somewhere that this might be related to the fml file that is updated every time when you do changes to the service.
Is there any tool / way to fix the broken fml file ?
any other idea that might be cause this?
Cheers
Lare

Hey
I read somewhere that this might be related to the fml file that is updated every time when you do changes to the service.
Is there any tool / way to fix the broken fml file ?
any other idea that might be cause this?
Cheers
Lare

External Data Refresh failed - Unable to refresh list data in Excel Web Access WebPart

Hi,
I have created a PivotChart in Excel workbook that fetches data from a SharePoint list using "OData Data Feed". When refreshing the connection in Excel 2013, the updated data is displayed in PivotChart. But when i upload the same to a SharePoint
Library and refresh it through Excel Web Access WebPart, it throws an error.
After configuring PowerPivot for SharePoint, i am getting a "We cannot locate a server to load the Data Model" error.
Note -
SQL Analysis Service(PowerPivot) is in running state.
PowerPivot Server has been under Data Model in Excel Service setting.
The library location is added in trusted zone.
Using secure store didn't fix the issue.
Stack Exception
SSPM: Initialization failed on server : Microsoft.AnalysisServices.ConnectionException: A connection cannot be made. Ensure that the server is running. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively
refused it 127.0.0.1:2383
at System.Net.Sockets.TcpClient..ctor(String hostname, Int32 port)
at Microsoft.AnalysisServices.XmlaClient.GetTcpClient(ConnectionInfo connectionInfo) --- End of inner exception stack trace ---
at Microsoft.AnalysisServices.XmlaClient.GetTcpClient(ConnectionInfo connectionInfo)
at Microsoft.AnalysisServices.XmlaClient.OpenTcpConnection(ConnectionInfo connectionInfo)
at Microsoft.AnalysisServices.XmlaClient.OpenConnection(ConnectionInfo connectionInfo, Boolean& isSessionTokenNeeded)
at Microsoft.AnalysisServices.XmlaClient.Connect(ConnectionInfo connectionInfo, Boolean beginSession)
at Microsoft.AnalysisServices.Server.Connect(String connectionString, String sessionId, ObjectExpansion expansionType)
at Microsoft.AnalysisServices.Streaming.OnPremise.Server.Connect(Nullable`1 ctx, Boolean schedulePingTaskOnFailure)
at Microsoft.AnalysisServices.Streaming.OnPremise.Server.Initialize(Guid serviceId, CancellationToken ctx)
at Microsoft.AnalysisServices.Streaming.OnPremise.Tasks.InitializationTask.Run(CancellationToken ctx)
Check Server Version (ServerName\POWERPIVOT): Fail (Expected:
=11.0.2800.0, Actual: 11.0.2100.60).
--> Check Deployment Mode (ServerName\POWERPIVOT): Pass.
Monitorable Check Server Configuration (ServerName\POWERPIVOT): Fail (Uninitialized, ConfigurationError, WrongVersion).
SSPM: Initialization failed on server ServerName\POWERPIVOT: Microsoft.AnalysisServices.Streaming.ServerConfigurationException: Server ServerName\POWERPIVOT failed configuration checks (Status = Uninitialized, ConfigurationError, WrongVersion).
at Microsoft.AnalysisServices.Streaming.OnPremise.Server.AssertServerConfiguration(Server amoServer, CancellationToken ctx) at Microsoft.AnalysisServices.Streaming.OnPremise.Server.Initialize(Guid serviceId, CancellationToken ctx) at Microsoft.AnalysisServices.Streaming.OnPremise.Tasks.InitializationTask.Run(CancellationToken
ctx)
Thanks,
Thomas Mathew

Hi,
For your issue, the possible reason is that the SharePoint environment does not have a PowerPivot for SharePoint server, or the SQL Server Analysis Services (PowerPivot) service is stopped.
Install PowerPivot for SharePoint or move the PowerPivot workbook to a SharePoint environment that has PowerPivot for SharePoint installed.
If the software is installed, verify that the SQL Server Analysis Services (PowerPivot) instance is running. Check Manage services on server in Central Administration. Also check the Services console application in Administrative Tools.
Refer to the following link:
http://msdn.microsoft.com/en-us/library/ff487858.aspx
Besides, here is a similar post, you can use as a reference:
https://social.technet.microsoft.com/Forums/en-US/2e728b3e-6d3d-497b-b0ce-57f2699710e5/access-was-denied-by-the-external-data-source-the-following-connections-failed-to?forum=sharepointadminprevious
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Error when refreshing web intelligence document less then every minute

Hi all,
I get the following error, when refreshing document via javascript more often then every minute:
Server Error in '/Dashboard' Application.
FatalException occured. The cause was : BusinessObjects.Enterprise.OcaFramework.Oca.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2 at BusinessObjects.Enterprise.OcaFramework.ManagedService.invoke(MethodInfo method, Object[] args, IDictionary context)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: BusinessObjects.Enterprise.OcaFramework.ManagedServiceFatalException: FatalException occured. The cause was : BusinessObjects.Enterprise.OcaFramework.Oca.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2 at BusinessObjects.Enterprise.OcaFramework.ManagedService.invoke(MethodInfo method, Object[] args, IDictionary context)
Source Error:
Line 121:
Line 122:                    //Session["StorageToken" + strDocId] = doc.StorageToken;
Line 123:               doc = reportEngine.OpenDocument(intDocID);
Line 124:               //doc = reportEngine.GetDocumentFromStorageToken(storageToken);
Line 125:               doc.Refresh();
Source File: c:\inetpub\wwwroot\dashboard\document.aspx.cs    Line: 123
Stack Trace:
[ManagedServiceFatalException: FatalException occured. The cause was : BusinessObjects.Enterprise.OcaFramework.Oca.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2
   at BusinessObjects.Enterprise.OcaFramework.ManagedService.invoke(MethodInfo method, Object[] args, IDictionary context)]
   BusinessObjects.ReportEngine.WI.Internal.Server.OCCA._WICDZProxy.initInstance(Byte[] p0, UTF8StringHolder p1)
   BusinessObjects.ReportEngine.WI.Internal.Server.OCCA.OCCAServerStub.InitInstance(String clientInfo, Int32& returnCode)
[CommunicationException: The Web Intelligence server could not be reached. Contact your Business Objects administrator. (Error: RWI 00236)]
   BusinessObjects.ReportEngine.WI.Internal.Server.OCCA.OCCAServerStub.InitInstance(String clientInfo, Int32& returnCode)
   BusinessObjects.ReportEngine.WI.Internal.Server.ServerCaller.InitInstance(String clientInfo)
   BusinessObjects.ReportEngine.WI.Internal.WIDocumentInstance..ctor(WIReportEngine engine, Int32 documentId)
   BusinessObjects.ReportEngine.WI.Internal.WIReportEngine.OpenDocument(Int32 documentId)
   Dashboard.document.Page_Load(Object sender, EventArgs e) in c:\inetpub\wwwroot\dashboard\document.aspx.cs:123
   System.Web.UI.Control.OnLoad(EventArgs e)
   System.Web.UI.Control.LoadRecursive()
   System.Web.UI.Page.ProcessRequestMain()
Version Information: Microsoft .NET Framework Version:1.1.4322.2407; ASP.NET Version:1.1.4322.2407
I searched forum and google for this error, but I didn't find anything. Did you heard of this error? How can I fix it?
My BO Version is BusinessObjects Enterprise XI (without any ServicePacks). Is there a SP which fix this error?
Thank you for every idea!!!

Hi,
Copy File from Client system to server in same folder location .
Make sure in Edit Query option Editable & Refreshable options are checked .
Please check the links below .
Webi Excel Personal Data Provider Dynamic Data
How to create a webi report using excel as source
Excel as datasource in Infoview
Excel source located in Infoview

Error when refreshing WEBI report with Universe Connection Type "SSO"

Hi Experts:
We are trying to refresh the Webi report in Infoview with Universe Connection set as "Use Single Sign On when refreshing the report at view time", so that we can leverage SAP OLAP authorization variable from Bex Query which the Universe is built on.
However got the error of "incomplete logon data" after all the configurations done following below blogs:
SNC Part 1
/people/ingo.hilgefort/blog/2009/07/03/businessobjects-enterprise-and-client-side-snc-part-1-of-2
SNC Part 2
/people/ingo.hilgefort/blog/2009/07/03/businessobjects-enterprise-and-client-side-snc-part-2-of-2
We already have Win AD SSO to SAP setup, and in BO CMC, Win AD user is mapped to SAP user ID.
The SNC settings are:
- AD Account: service.test.bobj (all lower-letters)
- 32-bit gsslib on the BO server, and 64 bit on the BW server side.
- SNC0: p:service.test.bobj at DOMAIN
- SU01 --> BO_Service ; SNC: p:service.test.bobj at DOMAIN
- Entitlement system tab --> username: BO_Service
SNC Name: p:service.test.bobj at DOMAIN
- SNC settings tab:
SNC Lib: c:\winnt\gsskrb5.dll
Mutual Authentication settings: p:SAPServiceBP0 at DOMAIN
In CMC, the role can be imported if "RFC activated" option unchecked in SNC0.
I found a few threads on the same topic, but they are all not answered:
SNC Client side configuration error
SNC Configuration Error: Incomplete logon Data
Can you please provide details of the solution if you have impleted a same scenario successsfully, or any thoughts to help the investigation?
Thanks in advance!
Regards,
Jonathan

Hi Ingo,
Sorry for taking so long to reply, we are trying to set up server side trust and enable SSO; but we still couldn't success.
What we did is:
1. We followed installation guide chapter 6, generate certificate and PSE, etc. All looks good.
2. Then we still have the "incomplete logon data" error when refreshing webi report after logon using Windows AD user ID.
3. Then we trace the PFC connection, the log is as below. We checked several BO notes, e.g. 1500150, 1461247.. The part bothers us is that we even don't have URI displayed in the log when system trying to use SNC, and we couldn't get more info on this which make us very difficult to diagnosis.
Can you please help? Thanks a lot!
Thu Mar 31 10:54:46.857 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Authentication model for SAP connectivity is SSO
Thu Mar 31 10:54:46.857 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Determining if we can connect using SNC. Calling CanAuthenticate...
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Unable to authenticate using SNC because the URI does not meet the minimum connection requirements.
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Determining if we can connect using SSO. Calling CanAuthenticate...
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Authentication model for SAP connectivity is SSO
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: The SAP SSO authentication process will fail because the SAP secondary credential are not properly updated and the password is blank.
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Trying to connect to SAP using this URI : occa:sap://;PROVIDER=sapbw_bapi,R3NAME=PB0,GROUP=BI_Group1,MSHOST=sapaupdb04,LANG=en,CLIENT=100,CATALOG="ZSPUM602",CUBE="ZSPUM602/ZSPUM602_Q50"
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Calling m_pRfcWrapper->RfcOpenEx() ...
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: RfcOpenEx(...) returned 0
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Call to m_pRfcWrapper->RfcOpenEx() took 0.141 seconds
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: SAPAuthenticationService::~SAPAuthenticationService

Error when updating the data from DSO to cube

Hi,
I am getting the error when uploading the data from the ods to cube.
The following is the error message.
Unable to determine period for date 20090101, fiscal year variant Z2: Error #
How can i solve this issue.
Regards
Annie

Hi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha

RFC error when sending logon data

Hi;
We cannot configure the STMS of our development system. When we try to
configure it, system gives an error message: Errors during distribution
of tp configuration; TMS Alert Viewers tells us
RFC_COMMUNICATION_FAILURE: RFC communications error with
system/destination TMSADM-FKT.DOMAIN_FKT RFC error when sending logon
data and READ_PROFILE_FAILED:File
erptest\sapmnt\trans\bin\TPPARAM
could not be opened for reading (No such file or directory).
Is there any advise for solution?
Best regards
Noyan
PS: Please find the profiles below:
START:
#.*       Start profile START_DVEBMGS00_erptest                                                                                *
#.*       Version                 = 000006                                                                                *
#.*       Generated by user = BASIS                                                                                *
#.*       Generated on = 30.12.2010 , 15:40:55                                                                                *
generated by R3SETUP
SAPSYSTEMNAME = FKT
INSTANCE_NAME = DVEBMGS00
SAPSYSTEM = 00
SAPGLOBALHOST = erptest
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
start database
#_DB = strdbs.cmd
#Start_Program_02 = immediate $(DIR_EXECUTABLE)\$(_DB) FKT
start message server
#_MS = msg_server.exe
Start_Program_03 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
Start IGS
Start_Program_05 = local $(DIR_EXECUTABLE)$(DIR_SEP)igswd$(FT_EXE) -mode=profile pf=$(DIR_PROFILE)$(DIR_SEP)FKT_DVEBMGS00_erptest
start application server
#_DW = disp+work.exe
#Start_Program_04 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS
General parameters for starting the system
#parameter created                          by: BASIS        24.12.2007 23:53:27
#SAPSYSTEM = 00
#parameter created                          by: BASIS        24.12.2007 23:53:27
#SAPSYSTEMNAME = FKT
#parameter created                          by: BASIS        24.12.2007 23:53:27
#INSTANCE_NAME = DVEBMGS00
#parameter created                          by: BASIS        24.12.2007 23:53:27
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
#parameter created                          by: BASIS        24.12.2007 23:53:27
#SAPGLOBALHOST = erptest
Start database
#parameter created                          by: BASIS        24.12.2007 23:53:27
_DB = strdbs.cmd
#parameter created                          by: BASIS        24.12.2007 23:53:27
Start_Program_01 = immediate $(DIR_EXECUTABLE)\$(_DB) $(SAPSYSTEMNAME)
Start message server
#parameter created                          by: BASIS        24.12.2007 23:53:27
MS = msgserver.exe
#parameter created                          by: BASIS        24.12.2007 23:53:27
Start_Program_02 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
Start applications server
#parameter created                          by: BASIS        24.12.2007 23:53:27
_DW = disp+work.exe
#parameter created                          by: BASIS        24.12.2007 23:53:27
Start_Program_03 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
DEFAULT:
SAPDBHOST = ERPTEST
dbms/type = mss
dbs/mss/server = ERPTEST
dbs/mss/dbname = FKT
dbs/mss/schema = fkt
SAPSYSTEMNAME = FKT
SAPGLOBALHOST = erptest
SAPFQDN = tr.delta.is
SAPLOCALHOSTFULL = $(SAPLOCALHOST).$(SAPFQDN)
SAPDBHOST = erptest
SAPTRANSHOST = erptest
DIR_TRANS =
$(SAPTRANSHOST)\sapmnt\trans
#DIR_TRANS = D:\usr\sap\trans
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
SAP Message Server for ABAP
rdisp/mshost = erptest
rdisp/sna_gateway = erptest
rdisp/sna_gw_service = sapgw00
rdisp/vbname = erptest_FKT_00
rdisp/enqname = erptest_FKT_00
rdisp/btcname = erptest_FKT_00
rdisp/msserv = sapmsFKT
rdisp/msserv_internal = 3900
rdisp/bufrefmode = sendoff,exeauto
login/system_client = 200
#GUVENLIK PARAMETRELERI
login/password_expiration_time = 90
login/min_password_lng = 6
#parameter created                          by: BASIS        25.03.2004 08:41:25
rdisp/gui_auto_logout = 10800
#parameter created                          by: BASIS        25.03.2004 08:37:47
#old_value: 3                                 changed: BASIS 25.03.2004 08:42:38
login/fails_to_user_lock = 6
#validasyon geregi, g#venligi artirma ama#i - check active but no check for SRF
#parameter created                          by: BASIS        16.06.2007 17:35:41
#old_value: 2
#changed: BASIS         14.05.2008 15:24:55
auth/rfc_authority_check = 1
#otomatik unlocki iptal eder
#parameter created                          by: BASIS        10.11.2006 17:47:15
login/failed_user_auto_unlock = 0
#AUDIT PARAMETRELER?
#old_value:                                   changed: BASIS 20.04.2005 17:13:37
rsau/max_diskspace/per_day = 1996800000
#old_value: 1000000000                        changed: BASIS 20.04.2005 17:17:01
#old_value: 0                                 changed: BASIS 20.04.2005 17:19:12
rsau/max_diskspace/local = 2048000000
#old_value: 2000000000                        changed: BASIS 28.03.2005 23:17:11
#old_value: 2                                 changed: BASIS 29.03.2005 12:09:14
#old_value: 0                                 changed: BASIS 20.04.2005 17:13:37
rsau/max_diskspace/per_file = 665600000
rsau/enable = 1
rsau/local/file = D:\usr\sap\FKT\DVEBMGS00\log\++++++++######..AUD
rsau/selection_slots = 12
#rec/client = ALL
DIR_AUDIT = D:\usr\sap\FKT\DVEBMGS00\log
FN_AUDIT = ++++++++######..AUD
#DIL PARAMETRELERI
#Turkish codepage settings
abap/import_char_conversion = 0
install/codepage/db/non_transp = 1610
install/codepage/db/transp = 1610
zcsa/installed_languages = DET
#zcsa/system_language = E
zcsa/system_language = T
zcsa/second_language = E
install/codepage/appl_server = 1610
#OS dependent
abap/locale_ctype = Turkish_turkey.28599
#DIR_PUT = D:\usr\sap\FKQ\upg\abap
   *** UPGRADE EXTENSIONS (RELEASE "701") ***
#rdisp/msserv_internal = 3900
#system/type = ABAP
INSTANCE:
SAPSYSTEMNAME = FKT
SAPGLOBALHOST = erptest
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
icm/server_port_0 = PROT=HTTP,PORT=80$$
SAP Message Server parameters are set in the DEFAULT.PFL
ms/server_port_0 = PROT=HTTP,PORT=81$$
#rdisp/wp_no_dia = 10
#rdisp/wp_no_btc = 3
#rdisp/wp_no_enq = 1
#rdisp/wp_no_vb = 1
#rdisp/wp_no_vb2 = 1
#disp/wp_no_spo = 1
rdisp/wp_no_dia = 12
rdisp/wp_no_vb = 3
rdisp/wp_no_vb2 = 0
rdisp/wp_no_enq = 1
rdisp/wp_no_btc = 3
rdisp/wp_no_spo = 1
#PERFORMANS PARAMETRELERI
#parameter created                          by: SAP*         08.08.2001 10:30:18
abap/fieldexit = yes
#parameter created                          by: ALPER        13.10.2000 18:24:16
install/collate/active = 1
rdisp/max_wprun_time = 25000
MEMORY_NO_MORE_PAGING dump nedeniyle
#parameter created                          by: BASIS        27.12.2006 17:00:22
rdisp/PG_MAXFS = 262144
abap/heap_area_nondia = 2000000000
rdisp/PG_SHM = 16384
rdisp/ROLL_SHM = 32768
#'STORAGE_PARAMETERS_WRONG_SET' or 'TSV_TNEW_PAGE_ALLOC_FAILED'
#Note 552209 - Maximum memory utilization for processes on NT/Win2000
#parameter created                          by: BASIS        30.10.2007 10:57:24
#abap/heap_area_nondia = 50000
#parameter created                          by: BASIS        30.10.2007 10:58:54
#rdisp/PG_SHM = 0
#parameter created                          by: BASIS        30.10.2007 10:58:27
#rdisp/ROLL_SHM = 625
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:49:57
dbs/mss/stats_on = 1
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:49:33
dbs/oledb/stats_on = 1
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:48:23
dbs/oledb/add_procs = 8
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:47:29
rsdb/esm/max_objects = 2000
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:47:03
rsdb/otr/buffersize_kb = 4096
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:46:21
rsdb/esm/buffersize_kb = 4096
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:18:14
ztta/parameter_area = 16000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:16:43
enque/table_size = 10000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:16:20
gw/max_sys = 2000
#Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:16:01
gw/max_overflow_size = 25000000
#Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:15:19
rdisp/max_comm_entries = 2000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:14:48
rdisp/tm_max_no = 2000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:14:20
gw/max_conn = 2000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:13:42
rdisp/max_arq = 2000
#Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:12:57
ztta/roll_area = 3500000
#parameter created                          by: BASIS        18.05.2005 09:20:25
#old_value: 90                                changed: BASIS 18.05.2005 09:22:25
rdisp/max_hold_time = 300
#parameter created                          by: BASIS        20.08.2003 12:10:20
#old_value: 6144
#changed: BASIS         03.01.2008 19:42:10
rsdb/obj/buffersize = 20000
#parameter created                          by: BASIS        20.08.2003 12:09:48
#old_value: 6000
#changed: BASIS         03.01.2008 19:42:59
rsdb/obj/max_objects = 20000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:42:11
#old_value: 250000
#changed: BASIS         30.10.2007 10:56:17
#abap/buffersize = 100000
#changed: BASIS         03.01.2008 19:40:36
#abap/buffersize = 300000
#by: BASIS 12.06.2008
abap/buffersize = 400000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:41:32
#zcsa/presentation_buffer_area = 20000000
#64 bite gectikten sonra   by: BASIS 10.06.2008
zcsa/presentation_buffer_area = 30000768
note 103747
#parameter created                          by: BASIS        08.07.2003 20:40:55
rsdb/ntab/ftabsize = 30000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:40:12
rtbb/max_tables = 500
note 103747
#parameter created                          by: BASIS        08.07.2003 20:39:15
#old_value: 20000
#changed: BASIS         03.01.2008 19:41:29
#rtbb/buffer_length = 30000
#64 bite gectikten sonra by: BASIS 10.06.2008
rtbb/buffer_length = 50000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:38:26
zcsa/db_max_buftab = 10000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:37:37
#zcsa/table_buffer_area = 50000000
#64 bite gectikten sonra   by: BASIS 10.06.2008
#zcsa/table_buffer_area = 89000000
by: BASIS 12.06.08
zcsa/table_buffer_area = 99000000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:36:54
sap/bufdir_entries = 10000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:36:12
rsdb/cua/buffersize = 8000
#note 103747
#parameter created                          by: BASIS        08.07.2003 20:34:46
#old_value: 5000                              changed: BASIS 08.07.2003 20:35:39
rsdb/ntab/sntabsize = 5500
#parameter created                          by: BASIS        08.07.2003 20:33:56
#note 103747
#old_value: 10607                             changed: BASIS 08.07.2003 20:34:58
#old_value: 10000                             changed: BASIS 08.07.2003 20:35:39
rsdb/ntab/irbdsize = 11000
#note 103747
#parameter created                          by: BASIS        08.07.2003 20:32:18
rsdb/ntab/entrycount = 40000
#old_value: 2076                              changed: BASIS 28.06.2005 19:36:21
#old_value: 5735                              changed: BASIS 28.06.2005 19:40:01
PHYS_MEMSIZE = 4096
#64 bite gectikten sonra   by: BASIS 10.06.2008
abap/heaplimit = 40894464
abap/heap_area_total = 2000683008
ztta/roll_extension = 2000683008
em/blocksize_KB = 4096
   *** UPGRADE EXTENSIONS (RELEASE "701") ***
#rdisp/elem_per_queue = 2000
#auth/auth_number_in_userbuffer = 9000
#snc/enable = 0

Hi Srikishan;
You are right. The problem was releated with secstore. I found a SAP note ( Note 1532825 - Deleting SECSTORE entries during system export/system copy). I created the program which ise mentioned in the note and than run it. After that everything seems ok now.
Thanks for your help and interest
Best regards
Noyan

Error when refreshing workbook in BEx: Specific Macro CallBack not found

One of our users is getting the following error when refreshing any BEx workbook (in BI7):
Problems while calling the exit on refresh: Specified Macro 'CallBack' is not found in the workbook
This error suddenly started this week, everything was fine before that, and no changes have been made to the user's PC. The problem is specific to this one user's PC.
Any ideas?
-Jason

Hi,
It seems a common error.
There is a note that mentions the error, and was fixed since BI addons SP 8
Note: 1267942 - Custom macro not being executed on a workbook
Download and test the latest version: bi710sp12_1200-10004472.exe
This should fix the issue.
FYI: SAPGUI 640 is not supported by SAP since 2008. If you are using this version, please download the SAPGUI 7.10 as well.
Thanks
Edward John

KP06 Cost Center Budget Planning System error when locking the data records

Hi,
While updating Cost Center Planning system(KP06) its giving the below error:
System error when locking the data records.
Message no. KI502
Diagnosis
The lock to protect the data records being processed could not be set. The
probable reason for this is that the SAP locking table is full and no more
entries can be added.
Procedure
Inform your system administrator immediately
No planning data has been changed
Message no. K8038
Diagnosis
You used Post. While preparing the data for posting, the SAP System
determined that no changes were made in the available databank values.
System Response
A posting activity price is not necessary
Please help me how can we rectify the above error..
Thanks
VS Rao

Hi,
check the locking entries (t-code SM12).
http://help.sap.com/saphelp_erp2004/helpdata/en/37/a2e3ae344411d3acb00000e83539c3/frameset.htm
Best regards, Christian

Error when generating master data routines

Hello all,
I´m trying to activate 0BPARTNER but an error appears: Error when generating master data routines, and no more information is provided.
I´m working with BW 7.0.
Has anybody had this problem?
How could I solve it?
Thanks in advance.
Carmen

Hi Carmen,
I'm working with SAP BW 700 and I had also this error during a characteristic activation in my QA system. This happened when I tried to transport the activated characteristic from my DEV system.
I found also message TK425 when I was trying activation through RSDG_IOBJ_ACTIVATE program.
I solved this error message with OSS note 01458319 700SP24: "Transport fails during the impact analysis of DTP".-
I hope this helps.
Best Regards.
AW

Error when generating master data routines when activating infoobject

Hello Gurus,
I had an issue with one of my info object.
I Created the one Custom InfoObject with Just 5 Char without any masterdata and used that in many cubes. we promoted the objects and cube to test and production systems. just couple of days back we can see the InfoObject went to inactive status even though the version is active(not sure how it happend). This is only happens in our test system and production is working fine. when i try to activate the InfoObject again the test system it gives me an error
Characteristic XXXXX: Error when generating master data routines. Tried to correct in RSD5 etc. Checked in RSRV everything is fine. Tried to re-promote the object from Development system. The transport also failed with the same error even though it is in unconditional mode.
Can you please suggest me what are the options.
i cannot delete the object as it is used in many cubes which is having data.
Appreciate your quick response.
Thanks,
Bhaskara Rao.

If your Prod is working fine, it should work in test too.
Did it ever worked in test after transport?
Is it possible some one tried to change something in test? If yes, you will get error when you will try to re-transport it as new transport can't find the previous structure.
You may try to activate the IO using FM RSDG_IOBJ_ACTIVATE
Edited by: ashok saha on Mar 6, 2008 8:05 PM

ERROR WHEN GENERATING EXPORT DATA SOURCE

Dear Members,
I am getting an error when generating export data source for Info Cube. I'm creating an Info Cube based on already existed info cube. Literally I am copying all the settings of an info cube to new Info Cube. The scenario is to load the data from one Info Cube to the other. The creation of Info Cube from an Info Cube is successful. But the problem is when I am generating export data source the following error is occurred.
Error: Data Source 81c_svrr does not exist in source system B3TCLNT800 of version A.
what could be the reason for the error?
Please let me know.
Thanks in advance.

Dear Venkat,
The problem is because of error in the Myself Connection , Check the Myself connection in the source systems and the activate and restore the connection and try, it should work..
Thanks,
Krish

Error when transforming object data HELP !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Hi
I am running on NW04s. Working on WD for ABAP Interactive forms. whenever I open the Adobe editor thru SFP or Se80, the editor opens up and I am able to do my operations. The moement I hit back button/Save or any other action which involves coming out of the adobe editor, it throws me an Fatal error - <b>Error when transforming object data</b>. I find that in most of the threads there are similar issues which are still open. Any Help would be appreciated.
I have installed ADLC 7.1, xACF04s.
Murali.

I did the same installation on another PC, and to my suprise it works fine. Looks very strange

Adobe Forms Error Message 'Error when transforming object data'

Hi,
When i tried to save(Adobe Forms) after making changes in Layout its giving an error message 'Error when transforming object data' and takes me out of the transaction. How do i solve this ? Can anyone help me out.
Thanks and Regards,
Franklin.

hi
I have the same problem , plz help me out
thanks

Technical Error When Extracting Time Data

Hi SAP Experts,
I would like to seek your assistance on this case.
When business warehouse extracts HR data from SAP, they received this error message stating "Technical error when extracting time data in HR: HRMS_TIME_TIM_QUOTA 00321478".
Do you have any idea on this?
Thanks.

We don't have Business Warehouse, but it seems your system has problems with a Quota, perhaps for employee # 00321478.

Error When Refresh Formatted Data inside Excel Analyzer

Similar Messages

Maybe you are looking for