Error when registering potential supplier in the SUS client

Dear experts,
We have configured the supplier qualification process in SRM
We are on SRM 7 EhP1.
Customizing switch SRM_701_SUCO_SUP_REG is active
We have set up SUS in a seperate client than SRM.
When trying to register a potential supplier I'm getting the following error message:
"An error occurred in the PD layer; transaction terminated"
There is no error in ST22 and I can't figure out what is wrong.
Hope one of you can help me here.
Thanks

Hello,
Refer to note 1639703 if it helps.
Best Regards,
Rahul

Similar Messages

Error when registering a portlet provider

I got the following error when registering a new portlet provider:
An error occurred when attempting to call the providers register function. (WWC-43134)
The following error occurred during the call to Web provider: 301: Moved Permanently (WWC-43147)
May I know what I may have done wrong?
I was able to open the portlet provider page by itself
Thanks

Can you double check whether the provider node is accessible from the portal middle tier (ping)?

An error when registering SQL server driver

Hi
I have got the following error when register SQL server drive
"RemoteMsDataBase.java": Error #: 302 : cannot access class com.microsoft.jdbc.sqlserver.SQLServerDriver; neither class nor source found for com.microsoft.jdbc.sqlserver.SQLServerDriver at line 19, column 63
the code that cause error
// register the SQL driver
DriverManager.registerDriver(new com.microsoft.jdbc.sqlserver.SQLServerDriver());
// connect to the DB by using the driver.
String connString = "my_dbserver:1433;databasename=my_database";
String strDBConnect = "jdbc:microsoft:sqlserver://" + connString;
conn = DriverManager.getConnection(strDBConnect, userName, passwd);
To include jars to my classpath do this:
javac -deprecation -classpath msbase.jar;msutil.jar;mssqlserver.jar *.java

javac -deprecation -classpath msbase.jar;msutil.jar;mssqlserver.jar *.javaSpecify the full path for jar(s), example,
javac -deprecation -classpath .;c:\myjars\msbase.jar;c:\myjars\msutil.jar;c:\myjars\mssqlserver.jar *.java
Hope it works.
Sudha

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.

Error when publishing crystal report to the BO server

Hello All:
Has any one encountered the following error when saving a report to the BO server.
Unable to launch C:\program files\Business Objects\BusinessObjects Enterprise 11\win32_x86\plugins\desktop\CrystalEnterprise.Report\ReportAdd program to add report to the system .
....Would appreciate your help.
Thanks
Parmesh

Hi,
looks like a Bug here.
heck SAP Note - 1183390
Regards
-Seb.

I get a connection timed out error when trying to connect to the itunes store, if I have pending downloads they show up and I can download, also I was able to access my account, yet I can't access other parts of the store, I am in greece on a macbook pro

I am from the states and am in Greece on vacation. I have a good wifi connection yet keep getting a connection timed out error when I try to access the itunes store. It is funny because pending downloads show up in the cue, and they download no problem. I can also open my account. When I try to go the the movies or music section of the stor though it just times out. I tried updating to the latest itunes software and restarting, also I checked all the proxy boxes in the network section of the settings then unchecked them all and restarted and it keeps doing the same thing. Any help would be appreciated.
Thanks

Welcome to AD!
There's been plenty of posts about Norton & the removal tool here. Unfortunately many folks seem to not even know it comes pre-installed on most PCs! Even a trial version, never used or long since expired can cause problems - and not just with iTunes.
Anyone with a Dell, HP, Gateway EEE PC, Asus ..... what Windows PC manufacturer does NOT have this junk software pre-installed?
Almost all of them have made deals with Symantec to pre-install it.
Horrible, horrible software.
Anyway, glad you finally solved your problem.

Error when loading XSLT mapping of the application

Hi,
I am using XSLT mapping in XI.
It is working ok when I test it in Interface Mapping but it gives below error when I test end to end scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">TRANSFORMER_CONF_EX</SAP:Code>
<SAP:P1>com/cba/***.xsl</SAP:P1>
<SAP:P2>urn:**:**</SAP:P2>
<SAP:P3>450326d0-1559-11dd-99a1-d89c0a0a380b</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when loading XSLT mapping of the application</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Yes, I have activated it
Regards,
Anirudh.

hi
please assure that if you save your xslt stylesheet locally, that it is saved in UTF-8 format, before you import it.
Pls do export the imported archive as a zip file to your local disk and try opening the same. If its not then the zip file which you have uploaded might have got corrupted/is not fully uploaded.
Try activating the imported archive and do a check before you do that. This you can do with a minor change in the description or so.
reward points if found helpfull
regards
chandra.k

HT1926 I am getting an R6034 error when I attempt to download the latest version of iTunes. What does this mean?

I am getting an R6034 error when I attempt to download the latest version of iTunes. What does this mean?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99885)

I keep getting an unknown error when trying to connect to the store. I ran diagnostics and it says secure link to itunes store failed.

I keep getting an unknown error when trying to connect to the store. I ran diagnostics and it says secure link to itunes store failed. I've tried all suggestions from apple and nothing will work.
Please Help

I received this email from Apple and this corrected the problem for me... I only had to reset the iTunes cache
1) Open iTunes
2) At the top menu, click File > Preferences (iTunes > Preferences on a Mac)
3) In the Preferences menu, click the Advanced tab
4) In the Advanced menu, you should see a button that says "Reset Cache". Please click this button.

Getting Error when trying to connect to the Primavera database. PPM V7 SP3

Hi Guys,
Caused by: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'mailService' defined in class path resource [com/primavera/bre//com/primavera/bre/integration/intgconf.xml]: Invalid destruction signature; nested exception is org.springframework.beans.factory.support.BeanDefinitionValidationException: Couldn't find a destroy method named 'destroy' on bean with name 'mailService'
I have looked into the intgserver.jar under P6IntegrationAPI/lib and looked the com.primavera.infr.srvcs.MailServiceImpl.java and can see that there is no destroy method whereas it is defined in the com.primavera.bre.intergration.intgconf.xml as below

<bean id="mailService" class="com.primavera.infr.srvcs.MailServiceImpl" init-method="init" scope="singleton" destroy-method="destroy"*+>
<property name="adminManager"><ref bean="adminManager"/></property>
<property name="threadPool"><ref bean="threadPool"/></property>
<property name="settingsManager"><ref bean="settingsManager"/></property>
</bean>
I get the above error when trying to connect to the Primavera database. I use PPMV7 SP3 and I have installed the Integration API from EPPMV7 bundle.
My demo's are working fine.
Any help would be appreciated.
Thanks,
Kajal.

Hi Marc,
I am using a userid (is an admin)
Using global login method and provided userid & password in integration settings.
In the machine profiles, provided userid, password and domin.
Not providing domain in weblogin.
With all the above I am still getting error "Could not authenticate the specified user. %0" for HFM application
And with the same settings I am not getting any error to connect to essbase cube.
Any suggestions?
Thanks
Krishna

I just purchased a month to month subscription for Acrobat Pro and I am getting an error when I try to download the software.

I just purchased a month to month subscription for Acrobat Pro and I am getting an error when I try to download the software. after about 50% of the way, it just crashes.
Thank you,
JTF

I am having the same problem - the install crashes around 40%.
I am using MAC OS 10.10.2 and purchased Acrobat Pro monthly subscription. The error message is:
'Acrobat installer has encountered an unexpected failure. Please try again. If it continues to fail, contact Adobe support.'
I have tried several times but keep getting the same error message. Any ideas?
Thanks,
Cindy

I am upgrading from Tiger to Snow Leopard. I keep getting an error when I try to load the Mac Os x update combined. It says that it was corrupted during download. Have try loading from Apple website V10.6.7 upgrade combined but it still won't do it?

I have an Intel Desktop iMac and I am upgrading from Tiger to Snow Leopard. I keep getting an error when it tries to load the Mac OS X update combined. It says that it was corrupted during download. Have try loading from Apple website Mac OS X V10.6.7 upgrade combined but it still won't do it? Any other suggestions. The printer is not working either - I am not sure if they are connected. Everything else is fine.

Please excuse, but I have to ask an obvious question: Did you already update using the Snow Leopard Retail install DVD? (You must do this first; 10.6.7 is just an update if you already have 10.6.) Are you, then, trying to update from whatever version was on the install DVD to 10.6.7?
Otherwise, I'd keep trying. The 10.6.7 Combo is a huge update.

Why I get an error when running a sequence using the LabVIEW operator interface ?

I have a simple TestStand sequence calling LabVIEW vis that is giving me an error when I run it with the .exe version of the LabVIEW operator interface and I set TestStand to run the vis using the 8.2.1 runtime engine instead of the development adapter. I made a change in the operator interface to open a vi programatically and get the value of a control, this vi is also used in the TestStand sequence I am trying to run. Could this be causing my problem ?
Thanks

Hello Verdulken,
I have a few additional questions:
Does your application function correctly when running the LabVIEW operator interface you have created as a VI in the LabVIEW development environment (i.e. does this problem only occur when the LabVIEW operator interface is run as an executable)?
What is the error that you are receiving?
Regarding the VI that you open programmatically, do you open it in a visible manner (i.e. use the Show front panel when called option from VI Properties)?If so, do you also close this VI after it finishes (i.e. use the Close if originally closed option from VI Properties)?
Does the error occur on the step that calls this very same VI again later in the sequence?
Does your application function correctly if you use the development adapter for all of your calls?
Thank you in advance for this information,
Matt G.
National Instruments
Applications Engineering

Error when I try to use the XMLElement(), XMLForest(), etc functions?

I'm getting an "invalid column name" error when I try to use the xmlelement() function (and the like). Is this function only available on 9i Release 2? How do I find the SQLX functions and/or load them up for use? Hopefully someone will see this as a quick question and answer it for me!
Cheers,
Fish

Reply
Sorry. These are not loadable they are core database functionality only available with 9.2.0.1.0 and later..

There was an error when attempting to connect to the Windows Live Calendar service.

I keep getting a message when I want to check my email you are not connected (but I am,as I can get in my Webbrowser) and the following error message
There was an error when attempting to connect to the Windows Live Calendar service. If the error persists, check to see if there's an upgrade of Windows Live Mail available or contact a service representative.
Can anyone help me, no sense sending me an email, I cannot get into my email.
Lucienne1

Hi,
Try installing Windows 2012 Live Essentials here.
You will have to set up your Pop 3 or IMAP email account after installing the updated version per above.
Are you using an Internet Service Provider Email account or a cloud based (IMAP) Email account?
Pop 3 accounts will require incoming and outgoing server addresses and any additional security settings required by your ISP. If you don't have the required settings for Pop 3 you will have to contact your ISP for those.
Jaco
****I am not an HP employee****
Errare humanum est.

Error when registering potential supplier in the SUS client

Similar Messages

Maybe you are looking for