Error when releasing a CTS request

When I release the parent request I get a message that the infosource cannot be included in the request.Local object is edited without a request...
Please help !!

Hi,
Goto RSA1 -> Infosource -> Extras (from menu)-> Object Directory -> Infosource -> assign a package and to the transport request.
Bye
Dinesh

Similar Messages

  • Error when releasing a transport

    Hello experts,
    I am getting an error when releasing a transport. The error message is telling me that
    Object DTPA DTP_009C8T81IIB6H4UFC7FQUVRFL was set to 'inactive'   
    The detailed error message isnt very helpful. The performance assistant gives the error message RSO 407.
    I found another thread,  scn.sap.com/thread/3428031
    The answer in this thread appears to be very close to a solution for me, I just need a little more information I think. As it says, I have looked in the table RSTRAN for the transformation that this DTP processes. There are three rows, with a different OBJVERS. A and M are both set to ACT, but OBJVERS = D is set to OBJSTAT = INA.
    I suspect that this is the problem with the releasing of my transport. Do you agree?
    If so, how do I go about getting this activated?
    Many thanks.

    Hi Simon,
    The D version will be always inactive as it indicate SAP Delivered version of the transformation.
    I will suggest just have a look at any existing transformation, you will find same status i.e D version INA also check last change it will be SAP also under content column you will find info for D version.
    I still say, just go ahead and release your transport by ignoring the message, it should work. You are all set to move your transport.
    Rest upto you.
    I have tried releasing transport by ignoring messages many times.....and worked all time
    Thank-You.
    Regards,
    VB

  • Error when releasing billing to Accounting

    Hi All,
    I get the following error when releasing the billing to accounting in T-code VFX3....
    Tax code   in procedure TAXSL is invalid
    Message no. FICORE704
    Diagnosis
    The tax code entered is not defined in the country for this company code.
    System Response
    Procedure
    Check and, if necessary, correct the entry.
    Procedure for System Administration
    If it is not an input error, check and possibly change the system settings.
    To do this, choose Maintain entries (F5).
    1. Check whether the required tax determination procedure is assigned to the relevant country. the Procedure field is in the detail screen.
    2. Create a new tax code if required
    Pls note that in the error message it does not mention a particular tax code which is invalid, it jus shows tax code   in procedure TAXSL is invalid.
    I have done the following customization both in FI and SD.
    I have maintained condition record MWST both in FI and SD. Maintained all necessary tax codes in FTXP.
    Note that in the billing, we enter the condition type MWST in the Header Level and enter the relevant percentage manually. According to my understanding since the condition is maintained at header level there is no need of maintaining condition records through T-Code VK11.Therefore the tax code is not picked from the condition record as its not maintained in the item level.
    Pls advice me on how to overcome this error ASAP since its critical.
    Thanks in Advance,
    Maleeq

    Hi,
    Yes I have maintained tax codes in FTXP. but the error message shows that "tax code __ is missing in tax procedure TAXSL". To my knowledge it is not possible to create a tax code "blank"!!!!
    I have not maintained condition records in VK11 as we maintain the MWST condition in the Header level. Condition records are picked only from ITEM level and NOT from HEADER level.
    Maleeq

  • Error when posting a SOAP request

    Hi all,
    Facing error when posting the SOAP request and after entering the Server Username and password giving error that http not found and url
    The URL i follow is http://<hostname>:<port>/XISOAPAdapter/MessageServlet?version=7.0&channel=:BusinessSystem:PI_SOAP_CC
    can any one of you tell me in place of XISOAPAdapter what should i place?
    Please help me to post the SOAP request to PI server.
    Thanks in advance ,
    Manohar.

    Hi ,
    copy the same URL  (Endpoint that you had given while generating wsdl file) to the browser and chek the status. ( http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel)
    See the below URL for the same i.e. SOAP adapter...http://help.sap.com/saphelp_nw04/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm
    You should get response something like this '
    Message Servlet is in Status OK
    Status information:
    Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/aii/30_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#15 $) bound to /MessageServlet
    Classname ModuleProcessor: null
    Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
    Lookupname for remoteModuleProcessorLookupName: null
    ModuleProcessorClass not instantiated
    ModuleProcessorLocal is Instance of com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0
    ModuleProcessorRemote not instantiated
    This  is make sure that webservice endpoint is given correctly. Don't forget to give username and password for connecting to XI server. user should xiappluser .
    Ranjeet Singh.

  • Error while Releasing a transport request - DSO 0SD_O03: Active version

    Hi all,
    I am getting below error when I am trying to release a transport request.
    Object ODSO 0SD_O03: Active version differs from modified version.
    I activated DSO again,but I was not successful to correct the error.Please help me correcting this error.
    Regards,
    Bob

    check
    match and copy while installing the business content
    Match (X) or Copy
    If the SAP delivery version and the active version can be matched, a checkbox is displayed in this column.With the most important object types, the active version and the SAP delivery version can be matched.
    When a match is performed, particular properties of the object are compared in the A version and the D version. First it has to be decided whether these properties can be matched automatically or whether this has to be done manually.
    A match can be performed automatically for properties if you can be sure that the object is to be used in the same way as before it was transferred from Business Content.
    When performing matches manually you have to decide whether the characteristics of a property from the active version are to be retained, or whether the characteristics are to be transferred from the delivery version.
    The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Installindicator separately.
    The active version is overwritten with the delivery version if
     the match indicator is not set and
     the install indicator is set.
    check following thread
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/102906a4-f13d-2e10-7199-ce316ff254b8?QuickLink=index&overridelayout=true
    Thanks and regards
    Kiran

  • Error when run "Rollback Run" request...

    Hi,
    when i run the request "Rollback Run",i get the following error:
    +++++++++++++++++++++++++++++++++++++++++++++++
    HR_6858_HRPROC_INV_PROC_NAME
    APP-PAY-06858: Invalid process name.
    Cause: an invalid process name, i.e. not in the following list has been specified: SLAVE, FORCE_CONTINUE, RUN, PREPAY, MAGTAPE, CHEQUE, CASH, COSTING, TRANSGL, ROLLBACK, FORCE_UNDO, RETRY.
    Action: please enter a correct process name from the list above.
    +++++++++++++++++++++++++++++++++++++++++++++++
    the information in pay_action_parameter is:
    Oracle Human Resources Generic Process
    Started at : 19-SEP-2007 13:31:30
    Chunk Size : 20
    Threads : 4
    Logging Category :
    User Messaging : N
    Interlock : N
    Trace : N
    RR Buffer Size : 20
    RRV Buffer Size : 30
    Bal Buffer Size : 30
    EE Buffer Size : 40
    Logging Area :
    Assignment ID for Start:
    Assignment ID for End o:
    Previous,when i run the request "Payroll Run",i get the same error,so i Relink PYUGEN from the command line, using the following syntax:
    adrelink.sh force=y ranlib=y "pay PYUGEN",the problem was resolved.but now the request "Rollback Run" occur the error too.
    Help me,please!
    Thanks nownew.

    relink all pay executables, not just the PYUGEN one.

  • Error when releasing Transports in ChaRM

    Good Day;
    When releasing a transport thru ChaRM I get the following error
    "Release of system could not be determined. The error message is "/TMWFLOW/CRIT_OBJ061"
    Any ideas?
    Thanks
    Don

    Good Day Farzan;
    We have the following systems
    Solution Manager      (Netweaver)
    Development System (Client 100 SAP 4.7)
    Quality System      (Client 100 SAP 4.7)
    Production System      (Client 100 SAP 4.7)      
    Regards
    Don

  • Error when releasing a transportation order

    Good morning.
    I am trying to release a transportation order that contains a nonstandard table which has been added two fields, and the corresponding data elements and dominions of the new fields.
    When releasing the order, dumps an error and cancels the export.
    The status of the order now is "Initiated liberation".
    The error code is:
    "Error SQL 932 when accesing SPROXDAT: ORA-00932: inconsistent datatypes: expected %s got." And makes reference to data elements, but i think they are OK.
    Please,  ¿someone can help me?
    Thanks a lot.
    Regards.

    well the problem is very likeley that the table has enhancement options which allow only character and NUMC append fields.
    you most probably violated those preferences.

  • Error when creating a leave request

    Hi Experts,
    I am setting up ESS (WDA) EHP5 on Portal 7.3. I and ERP6. I got this error when clicking on the calender to create a leave request:
    No data for infotype 0001, personnel no. 00000000 in period 2012-01-24 - 2012-01-24. (Modifiers not found)
    Got the same error on the portal as well as using PTARQ
    I did customizing for Leave Request and there are also data for IT0001.
    Is there anything else missing?
    Please advise.
    Thanks.

    SInce you are getting a message recarding pernr 00000000, it looks like your user in portal may not be tied to an employee via infotype 0105?
    /Kirsten

  • Error when releasing the WS using the transaction WSCONFIG

    Hello Colleagues,
    Following error message is recieved when i try to release the webservice using the transaction WSCONFIG.
    Error when creating Web service (Method call of IF_SRT_REGISTRY_ENTRY~CREATE_NEW failed; the class  does not exist)
    Can you please let me know if anyone of you have faced the similar error and have been successful in solving.
    Thanks & Best regards,
    Ajay

    Hi Ajay,
    Check if the thread below resolves your issue:
    [Re: web service - How activate host ?;
    Regards, Trevor

  • Error when release account plan via CRM_ACC_PL

    Hi expert,
    Getting error 'Overlapping validity periods for two condition records' when release account plan via CRM_ACC_PL.
    Any idea what caused this error?
    Cheers.

    Hello,
    could you please check notes 1311405, 1067232, 1044090, 1041830.
    Hopefully they can help.
    Regards,
    Gerhard

  • Strange error when releasing CR to QA

    In CHARM, I try to release a tp CR to QA. The steps are as follows:
    go txn crm_dno_monitor
    double click the CR that should be released to the QA
    select the action "pass correction to test"
    Then it fails with message as follows:
    Action Release Transport Request in system AZS 801 of type Source Systems has been cancelled
    Message no. CHM1_ACTION_LOG065
    Diagnosis
    Action cancelled because of error.
    System Response
    Action is cancelled. Transaction status error.
    Procedure
    The error messages are retained for further analysis until the next transaction check.
    Procedure for System Administration
    Analyze other messages in the application log of the task list of the transaction.
    I did not have this error before.
    I find 2 SDN threads with the same error:
    1) SP 18: Unable to import in QAS system
       However after apply the said note, the error is still there;
    2) Re: Transport Request is not getting released by Change Requests
       However we do not have any inactive objects in SE80.
    Please share yout experience. Thanks a lot!

    Hi
    Refer to below mentioend note : 1239726.
    Hope it helps.
    Cheers
    Deepanshu

  • Error when importing a Transport request in CHARM???

    Hi all,
              when i am trying to import a transport a request( thru CHARM) , its throwing an error " No valid system specified (Q11)" and "Import error: Check TMS Alert Viewer in target system"
    Note::I was able to create a Transport request , release it but facing problem while importing to quality system.development system is ECC5.0 and quality is ECC6.0
    rgds,
    Anand

    HI abhi,
            i havecreated the domain link, my ECC5.0 and ECC6.0 are in one domain of which ECC5.0 is domain controller,now i configured Solution manager as new domain controller and created a link between these two domains...
    now my queries are:
    1.is it enuf if i create a link between or even shud i create som transport routes between the newly added system from other domain and the existing domain
    2.i am not able to see the STMS configuration in solution manager system.ie in my ECC5.0 system( domain ctrller)if i goto STMS->Overview menu-> transport routes i see the configuration, which i cannot see by logging  into solution manager and wentto STMS->Overview menu-> transport routes i dont see
    rgds,
    Anand

  • Error when creating a travel request with Advance amount

    Hi Gurus,
    When I create a travel request with an Advance amount and try to save the same, the system throws up an error msg : "Trip country does not exist in the system (T005).
    However, it allows me to create the travel request without this error if i dont enter any advance amount in the travel request.
    I checked the tables V_T706L and V_T706O and found my trip county to be existing.
    Regards
    Prakash

    Hello Prakash,
    The following are the prerequisites for transferring trip costs to accounting.  In other words when you try to create and save a travel request with advance you are involving accounting entries and therefore the following needed to be checked:
    1.Travel Management and Accounting are both at Release 4.5A. If at least one of the systems
    has a release level lower than 4.5A, follow the instructions in Customizing for ALE.
    2. For payment to be effected, vendor accounts must exist in Accounting for the respective
    personnel numbers.
    3. The following Accounting tables must be replicated in the Travel Management System using
    Customizing transports:
      Company Codes (T001)
      Countries (T005)
      Input Tax Codes (T007A, T007S)
      Document Types (T003)
    4. The transfer of settlement results
    More relevant in your case would be the point 3. Countries(T005) not defined in TM.
    Hope the above provided you more information.
    Rgds
    CONMJI

  • Error when release to accounting document

    Hi there:
    After finish creating the invoice via vf01 based on the outbound delivery and I am abou to release to accounting document,I encountered below error that I have never seen before:
    Document type RX not defined,and when I click release to accounting document again,it popped up below error message:
    Requested function FKFR is not available here.
    What do above two error message mean? Help.

    Hi,
    While defining the billing document type for ex., F2 in VOFA for the field Document Type = RV-(Billing doc transfer).
    Kindly check for your billing document type what is maintained.If it is maintained as RX then check it in OMBA whether it is existing there or not.
    Regards,
    Gopal.

Maybe you are looking for