Error when releasing the WS using the transaction WSCONFIG

Hello Colleagues,
Following error message is recieved when i try to release the webservice using the transaction WSCONFIG.
Error when creating Web service (Method call of IF_SRT_REGISTRY_ENTRY~CREATE_NEW failed; the class does not exist)
Can you please let me know if anyone of you have faced the similar error and have been successful in solving.
Thanks & Best regards,
Ajay

Hi Ajay,
Check if the thread below resolves your issue:
[Re: web service - How activate host ?;
Regards, Trevor

Similar Messages

Error when I try to use the XMLElement(), XMLForest(), etc functions?

I'm getting an "invalid column name" error when I try to use the xmlelement() function (and the like). Is this function only available on 9i Release 2? How do I find the SQLX functions and/or load them up for use? Hopefully someone will see this as a quick question and answer it for me!
Cheers,
Fish

Reply
Sorry. These are not loadable they are core database functionality only available with 9.2.0.1.0 and later..

I am getting JavaScript Errors when I attempt to use the Multiscreen Preview function in DW CS 5.

When I attepmpt to use the Multiscreen Preview button in DW CS 5 I get the following error:
"While executing onShow in MultiscreenPreview.htm, the following JavaScript error(s) occured:
In file "Multiscreen Preview":
onShow is not defined"
This leads to either an unusable multiscreen preview box or another series of similar JavaScript errors.
Is there a solution to this problem and if so what is it?
Thank you for your time.

Follow this KB article:
http://kb2.adobe.com/cps/405/kb405604.html
Start with 12 & 4 and then go through the rest if needed.

Why I get an error when running a sequence using the LabVIEW operator interface ?

I have a simple TestStand sequence calling LabVIEW vis that is giving me an error when I run it with the .exe version of the LabVIEW operator interface and I set TestStand to run the vis using the 8.2.1 runtime engine instead of the development adapter. I made a change in the operator interface to open a vi programatically and get the value of a control, this vi is also used in the TestStand sequence I am trying to run. Could this be causing my problem ?
Thanks

Hello Verdulken,
I have a few additional questions:
Does your application function correctly when running the LabVIEW operator interface you have created as a VI in the LabVIEW development environment (i.e. does this problem only occur when the LabVIEW operator interface is run as an executable)?
What is the error that you are receiving?
Regarding the VI that you open programmatically, do you open it in a visible manner (i.e. use the Show front panel when called option from VI Properties)?If so, do you also close this VI after it finishes (i.e. use the Close if originally closed option from VI Properties)?
Does the error occur on the step that calls this very same VI again later in the sequence?
Does your application function correctly if you use the development adapter for all of your calls?
Thank you in advance for this information,
Matt G.
National Instruments
Applications Engineering

Security error when lightroom attempts to use the internet

When using plugins e.g. smugmug or facebook after upgrading to Lightroom 3 I get -
System returned "securityError"when lightroom attempted to use the Internet.
tried to repair LR3, did not work. Suggestions on how to fix this?

Reply
Sorry. These are not loadable they are core database functionality only available with 9.2.0.1.0 and later..

Error when importing business layer using the eulpi

Hi there,
I have a problem importing a new business area into my TEST EUL environment from my DEV EUL. (they are on different databases, i.e. one EUL for each database but all databases are identical apart from database name).
i.e. 1st I export the business area from DEV using the following command:
eulapi -connect username/password@${DATABASE} -export ${EXP_FILE} -business_area "${BUS_AREA}" -identifier -log ${LOG_FILE} -audit_info
and it works perfectly, and I can import the resulting Business area file into a new EUL if the Business area already exists, however, if the business area does not exist on the TEST eul then I get the following error using the command:
eulapi -connect username/password@${DATABASE} -import ${EXP_FILE} -identifier -preserve_workbook_owner -import_rename_mode refresh -log ${LOG_FILE}
Could not locate the Folder with identifier 'XXXXX' in the target End User Layer
Import completed, but with warnings. Please check the result.
This command works to replace the business area if it already exists, but fails if the business area does not already exist, which is actually what I want to do, i.e. create business area in DEV and export it and then import to TEST as part of the test cycle.
The above command actually creates the business area but not the underlying folder. All permissions, database links etc on both DEV and TEST environments are identical.
Your help is appreciated!

Hi,
The export of the business area contains details of the business area and which folders are contained in the business area, but not the details of the folders themselves.
Hence if you import a new business area and the folders contained in the BA are not in the EUL you will get an error locating the folder.
Therefore to create a new BA you need to export all the folders in the BA and then export the BA itself. Then when you import you need to import the new folders first, then the BA.
Rod West

REL 12 GETTING ERROR WHEN PRINTING A BARCODE USING THE GRAPH TOOL

Hi,
We are getting the following error:
REP-34551: Oracle Graphics Graph: is deprecated. See help for more information.
Environment variable ORACLE_GRAPHICS6I_HOME not set
REP-1811: Error while generating a graph.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1811: Error while generating a graph.
So please advice.
Details of the DEV instance.
RDBMS : 11.2.0.3.0
Oracle Applications : 12.1.3
Thanks in advance.

Thanks for replying but I m no longer under the warranty and the CDs don't have any scratch at all. I guess it's problem with the hard drive. But it's there way to diagnostic and repair the hard drive without sending back to the manufacture??Should I just replace the hard drive?Is it ok to replace the hard drive with different band and then use the recovery disc?I also want to know what cause the hard drive to fail??

Error when releasing a block in the SAP paging

Hi,
I am getting the following CCMS alert.
Please help me understand of what can be the reason for the same

The Sytem is ECC6.0 Production.
The database is oracle 10g
The OS is AIX 5.3
Please help
when a particular report is executed, we are getting this message
Pls help

Error when releasing a transport

Hello experts,
I am getting an error when releasing a transport. The error message is telling me that
Object DTPA DTP_009C8T81IIB6H4UFC7FQUVRFL was set to 'inactive'
The detailed error message isnt very helpful. The performance assistant gives the error message RSO 407.
I found another thread, scn.sap.com/thread/3428031
The answer in this thread appears to be very close to a solution for me, I just need a little more information I think. As it says, I have looked in the table RSTRAN for the transformation that this DTP processes. There are three rows, with a different OBJVERS. A and M are both set to ACT, but OBJVERS = D is set to OBJSTAT = INA.
I suspect that this is the problem with the releasing of my transport. Do you agree?
If so, how do I go about getting this activated?
Many thanks.

Hi Simon,
The D version will be always inactive as it indicate SAP Delivered version of the transformation.
I will suggest just have a look at any existing transformation, you will find same status i.e D version INA also check last change it will be SAP also under content column you will find info for D version.
I still say, just go ahead and release your transport by ignoring the message, it should work. You are all set to move your transport.
Rest upto you.
I have tried releasing transport by ignoring messages many times.....and worked all time
Thank-You.
Regards,
VB

When am creating the material using the transaction MM01 getting the error

Hi all,
Could you please help me to solve this issue, When I am creating the material using the transaction MM01, am receiving the error message "Express document "Update was terminated" received from author "XXXXXXXX", I checked the in SM13 found error message showing in Z_LGPLA_BIN_POSTING.
Regards,
Muralikrsihna.

ST22 Error is : SAPSQL_ARRAY_INSERT_DUPREC, below is full error message
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"Z_LGPLA_BIN_POSTING" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
Regards,
Muralikrishna

I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update. They tried ch

I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update. They tried charging it at the store and got the same message. I was given another phone, I still get the same error with the new phone.

Wowuor,
Thank you so much for reaching to us today. I want to make sure that we get the device charging the correct way. There is no physical or liquid damage to the phone or to the power cord correct? Did this error just start to appear as of last week? Please keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport

When I try to use the internal hard drive as a scratch disk I get this error "unable to set scratch disk- the selected directory is on write protect or non-writable media. Any ideas on how to fix this. It only happens in fcp.

When I try to use the internal hard drive as a scratch disk I get this error "unable to set scratch disk- the selected directory is on write protect or non-writable media. Any ideas on how to fix this. It only happens in fcp.

By internal, I assume you're referring to your systems (boot) drive. Is it, by chance, a partitioned dive?
Also…although many people successfully use their systems drives as scratch disks, over time you'll have better results using a dedicated drive for your media.
Good luck.
Russ

I want to install lightroom previously installed on a macbook on a new macbook. I get an error message when I try to use the same serial number. How can I install lightroom on my new mac?

i want to install lightroom previously installed on a macbook on a new macbook. I get an error message when I try to use the same serial number. How can I install lightroom on my new mac?

Oliver,
Are you getting activation errors? As Ned stated , it is easier to troubleshoot if we have the specific type of error and error detail that you are getting.
Here is some help on activation if this is the issue:
https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Pattie

When I select "Convert" using the Adobe PDF conversion - I get "Error signing in"

When I select "Convert" using the Adobe PDF conversion - I get "Error signing in"

You need the CreatePDF forum

The error message "No more virtual tiles can be allocated" appears when I try to use the effects in the quick editing mode in my Elements 13. The baton OK has to be pressed several times for loading all effect patterns. The error returns when selecting th

The error message "No more virtual tiles can be allocated" appears when I try to use the effects in the quick editing mode in my Elements 13. The baton OK has to be pressed several times for loading all effect patterns. The error returns when selecting the particular pattern.
The problem does not appear, if PH Elements 13 is executed in the administrator mode.
The available computer resources are rather large enough: CPU INTEL i7 4 cores, 16GB RAM, 1TB HDD + 32GB SSD, Windows 8.1.
Please, advice how to solve this problem? Maybe, there is patch or updating available?

Dear n_pane,
Thank you for the quick answer. In the meantime I found other way to pass by the problem. I increased the cache level up to the maximum value 8.
The errors reported as "No more virtual tiles can be allocated" vanish, but I still do not understand, why PSE 13 cannot work properly by the lower cache levels, having available maximum resources it needed (10443 MB RAM and 26.53GB SSD space for scratches), or cannot collaborate with the fast SSDs properly.
I wish you all the best in the New Year 2015!

Error when releasing the WS using the transaction WSCONFIG

Similar Messages

Maybe you are looking for