Error when rendering my file...

an output module failed. the file may be damaged or corrupted.(-1610153464), how can i fix

I'm having the same issue. None of the usual recommendations have helped. specs are below.
Thanks!
What exact version of After Effects? Include the minor version number---e.g., After Effects CC (12.2.1) or After Effects CS6 (11.0.4). Do not just say "After Effects with the latest updates" or "After Effects CC"; give the specific version number. USING AE CC 2014.1.1
Have you installed the recent updates? (If not, you should. They fix a lot of problems.) YES, UPDATED NVIDIA K5000 DRIVER AND AE
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac". PC WINDOWS 8.1
If you are getting error message(s), what is the full text of the error message(s)? AFTER EFFECTS ERROR: RENDERING ERROR WHILE WRITING TO FILE "FILE PATH" AN OUTPUT MODULE FAILED. THE FILE IMAY BE DAMAGED OR CORRUPTED. (-1610153464)
What were you doing when the problem occurred? What is the exact sequence of steps that you are taking? NEW COMP NO 3RD PARTY PLUGINS, SIMPLE SOLID IN 1920X1080 COMP, COMP ADDED TO RENDER QUE AS QUICKTIME H.264 100%.
Has this ever worked before? If this worked before by doesn't work now, what has changed on your computer in the intervening time? NEVER WORKED
Tell us about your computer hardware. Include CPU type and number of processor cores, amount of RAM installed, GPU, number and sizes of connected monitors, number of disk drives, and how any external drives are connected. INTEL ZEON CPU E-52690 V2 @3.00 GHZ 2 PROCESSORS, 56GB RAM, 64-BIT OS X64 BASED PROCESSOR, TWO CONNECTED 27 INCH MONITORS, NO EXTERAL DRIVES CONNECTED, STANDARD RAID DRIVE IN PC.
What versions of drivers for your graphics hardware do you have installed (including CUDA driver and driver for display adapter)? CUDA K5000 CARD, RECENTLY UPDATED TO VERSION 340.84 (11.1)
Do you have any third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU)? INVIDIA GRAPHICS CARD ONLY
What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime"., NO SOURCE FOOTAGE, STRAIGHT SOLID ONLY IN COMP
Do you have QuickTime installed. (You should.) If so, what version? The answer should be specific, such as "QuickTime 7.6.2".
What other software are you running?QUICKTIME 7.7.5
Do you have any third-party effects or codecs installed? NO
Are you using OpenGL features in After Effects? YES, TRIED WITH IT OFF ALSO
Does the problem only happen with your final output, RAM preview, or both? ONLY FINAL OUTPUT WITH QUICKTIME FORMATS
Are you using Render Multiple Frames Simultaneously multiprocessing? TRIED BOTH WITH AND WITHOUT
Are you using the ray-traced 3D renderer? NO
If the problem is with output, give your exact output settings (both render setting and output module settings). Screenshots help. 1920X1080 23.98 SQUARE PIXELS QUICKTIME H.264 100% 30 SECONDS LONG. EXPORT GETS 34 FRAMES IN ( NUMBER OF PROCESSORS BEING USED) BEFORE ERROR MESSAGE POPS UP. ALSO TRIED WITH ONLY TWO PROCESSORS RUNNING AND IT CRASHED AT FRAME 2

Similar Messages

Error when rendering illegal file name

I appreciate any help. I am trying to finish a video and I have three clips in the video sequence that won't render. The message I get is "illegal file name, unable to render". I tried renaming the clip; saving the project under a different name; replacing the clip; overwriting the clip; shutting down the program; shutting down the computer. I have searched the manual and the discussion forums and have not been able to figure this out.
This is not the first video I've edited - am using final cut express.. iMAC WITH OS -X 10.6.1
Again, appreciate any assistance. Renee

Thank you all for helping me with this! I am using FCE 4.0.1 IMAC 24" 3.06SD/ intel core 2 DUO Machine is only 2 months old/ came with all software preinstalled. Video is taken on JVC Everio in MOD format and converted to MOV by Iverio convertmod program (which I installed). The video file permission is "you can read and write". The file itself is one clip - it is from the funeral service from my Mom's funeral and all I wanted to do is take out some of the dead space/ insert some video transistions/ and burn the video for relatives that were unable to attend. I am wondering if it has something to do with the fact that it is one clip that I have spliced into several clips. The file name is 2009-07-14 09h16mn16s.MOV When I rendered most of the clips that I spliced and added the transistions to, they rendered fine, but the last three spliced clips keep giving me the error reading "file error ..illegal name" When I try renaming just that spliced clip - it changes the name on all the clips in the timeline (including the previous rendered clips. I know I'm probably not thinking as clearly being that this video is a bit more emotional to me than the others I've worked with, but other than the fact that it is my mom's funeral - the only other difference is in the other video's I've done - each clip has a specific name (and maybe are 5-7 minutes long - and not just one long 52 minute clip that I'm splicing)
Again, I appreciate any help - I'm about ready to scrap the whole thing and start from the beginning -
Renee

Problem with Flash CS4. Getting error when rendering the file

Hi,
One of my user is facing problem with Flash CS4.
Whenever he tries to render the file, Flash CS4 throws the below error and only after restarting the application, it works fine for another couple of hrs.
Please some one help me to resolve this issue.
-Prabagaran L.

Please post in the Flash forum. This forum is for suite specific issues.
Bob

Error when rendering! Desperately in need of help!

Just out of nowhere I´m getting this error when rendering in a ProRes project:
"Codec not found. You may be using a compression type without the corresponding hardware card"
I have done nothing with my setup and have never had problems with this before. What can I do to fix this?

I started getting this error after exporting prores 422 (and 422 HQ) files from AE and dropping them into FCP. It happened a couple of days ago, right after I updated to QT 7.6.2. i checked out the details on the QT update and the update seems to focus on prores 422 functionality. so i think your theory about this having something to do with the update is spot on.
my solution was to export out of AE using photo-jpeg. it's pretty close to identical on the visual and color correctable if not. this project has the flexibility for this type of codec switch since everything originates in AE -- you may not have that flexibility.

Error in InfoPackage: Error when uploading Flat Files

Hello Experts,
I encoutered this error in Info Package when uploading a flat file.
When i try to click on the "Preview" button, this errors appear:
"Error 8 when compiling the upload program: Row
237, message: Data Type / BIC/ CCCBMA1_COCTR2 was found in a newer"
Please help to advise what is this error about and how to resolve this?

hi Annie,
run RSA1 and try again
Error when compiling the upload program (Message no. RSAR233)
other similar problem solved by run program(SE38)RS_TRANSTRU_ACTIVATE_ALL and relogon
A newer version of the data type error when loading
Flat File Preview error message
Error when loading from Flat File
Error message when previewing data in InfoPackage
hope this helps.

Error when publishing to file

i keep getting "an unknown error" when publishing to file or publishing all to mobileme...
It still works if i just publish to mobileme.
Any ideas?
Im trying to get my site going on go daddy, and kinda really need it in a folder...

If you are still getting the error then its likely that you have a corrupt domain file.
To prove this, quit iWeb, create a new folder on your desktop and drag your domain file out of - Home Folder/Library/Application Support/iWeb - into this.
Relaunch iWeb to force it to create a new domain file, add some content and try publishing to a folder.
If this works, your original file is corrupt.

Multiple JavaScript errors when opening aspx file in Dreamweaver

I get multiple javascript errors when opening aspx file in Dreamweaver similar to... "While executing translateHyperLink in ExternalRenderers.htm, a JavaScript error occurred."

Hi Steven,
Not sure if this is related, but can you try the solutions in Troubleshoot JavaScript errors | Dreamweaver CS4, CS5, CS5.5, CS6
Thanks,
Preran

Error when creating ZIP file (return value 2 when IGS was called)

Hello All
I attempted to Schedule a Query to the Portal folders and executes fine. However when it's scheduled to and email, I am getting this message
'Error when creating ZIP file (return value 2 when IGS was called)'
Any ideas?
Thanks ...BK

Hello Kai
Thanks very much for the info. how would I know what patch the IGS is?
Thank you.
Regards..BK

File Not Found Error When Rendering Motion Menu

Hi there.
I'm attempting to render a motion menu and keep getting the error "file not found". All of the necessary files are available and no specific missing file is mentioned.
The background video is a .m2v, and there is a .wav audio file too. They are 42 seconds long.
I tried other Encore projects and 2 others are doing the same thing, or coming up with a 'General Error'.
I have cleaned the Database in the Media Cache. I have uninstalled and reinstalled Encore. There are no updates available.
Any suggestions?
Thanks,
David

Yeah, it would have taken me quite a while to redo the menus completely! So I was very thankful for the save to menu template option.
When I (not recently, thank goodness!) have a project I suspect of corruption, I create a new project, and just "import as menu" from the old menu subdirectory. The method you used deletes the menus, so exporting the menus helps.
Mac OS 10.6.8
That's Snow Leopard, right?
Actually, I'm not really sure about Encore terminology (this was my first project), but the only motion I have in my menus is the line that appears under the button text when that button is highlighted. At one point I had the photo buttons (for videos) set to animate, but I removed that option.
A highlight is just a highlight, not "motion." Animated buttons, when rendered as the menu, are actually a video background, so that was a motion menu.
All 30 slideshows are actually individual video timelines. They were created and exported from Photosho Lightroom 3.
In Encore terminology, those are just videos - many Encore users choose to do slideshows as videos.
I had originally tried creating each one as a slideshow from within Encore, but I was DEEPLY dismayed by how slow Encore became, evetually locking up at least once per hour. It was ridiculous, even taking into account the fact that it is not a 64-bit program. I planned to leave 2 of the songs as Encore slideshows (Lightroom can't do Pan/Zoom), but in the end I had to replace them with mp4s because the slideshows just would not play. Really, it was about 11 wasted days plus 4 productive days to get me through the project!
Encore has a variety of problems with slideshows, but I suspect from your description that you were using very large images. Scaling them down a bit can improve performance.

Error when rendering for Flash

I have had two projects crash when rendering an Encore CS3 project.
The info in the data collection is:
AppName: adobe encore.exe AppVer: 3.0.1.8 ModName: dvacore.dll
ModVer: 2.0.0.60016 Offset: 0008bdb3
Any clues?

OK... I use Premiere Pro and then encode files with an application called Cinema Craft for m2v files. These are loaded into Encore and authored for dvd, tested and all work fine.
With two projects, encore crashes with the error I mentioned in my first post. Others have gone through fine but are consistent with how I always create projects.
I do work with a Matrox RXT.100 board with PP2.0 and have seen posts that PP CS# does not like rxt.100. This should not have any bearing on projects that are exported into m2v or wav and then imported into Encore CS3.
Is it best NOT to export into an mgp format and let Encore transcode video?
If more info is needed I would be glad to supply.

Internal server error when adding a file item

Hi Gurus,
We have Portal 9.0.2.0.1. We add all our documents to portal as file item. I am getting the following error when I try to add a file item. The file size varies from 1 MB to 10MB. It's all .pdf or .doc files. I am able to add 1 or 2 files, then I get this error.
please post a reply if you have any idea about this one.
Thanks
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Oracle HTTP Server/1.3.22 Server at prtl.nw.us Port 7778

I suggest that you log a TAR and work with Oracle Support on resolving this problem.
Regards,
Jerry
PortalPM

Error when deploying ear file

Hello
What could be the problem that I get this error when deploying my ear file with a web service within.
[#|2008-03-29T17:43:02.640+0100|SEVERE|sun-appserver-pe9.0|javax.enterprise.system.tools.deployment|_ThreadID=12;_ThreadName=Thread-26;_RequestID=0a164c90-57bc-4d4a-8b3f-270fc4584891;|Exception occured in J2EEC Phase
com.sun.enterprise.deployment.backend.IASDeploymentException: Fatal Error from EJB Compiler -- C:\Sun\AppServer\domains\domain1\generated\xml\j2ee-apps\agency_app\agency_jar\META-INF\wsdl\AgencyModuleWebServiceService.wsdl (The system cannot find the file specified)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
     at java.io.FileInputStream.<init>(FileInputStream.java:66)
     at sun.net.www.protocol.file.FileURLConnection.connect(FileURLConnection.java:70)
     at sun.net.www.protocol.file.FileURLConnection.getInputStream(FileURLConnection.java:161)
     at java.net.URL.openStream(URL.java:1007)
     at com.sun.enterprise.webservice.WsUtil.generateFinalWsdl(WsUtil.java:699)
     at com.sun.enterprise.webservice.WsUtil.generateFinalWsdl(WsUtil.java:643)
     at com.sun.enterprise.deployment.backend.WebServiceDeployer.doWebServiceDeployment(WebServiceDeployer.java:165)
     at com.sun.ejb.codegen.IASEJBC.doCompile(IASEJBC.java:855)
     at com.sun.ejb.codegen.IASEJBC.ejbc(IASEJBC.java:580)
     at com.sun.enterprise.deployment.backend.EJBCompiler.preDeployApp(EJBCompiler.java:339)
     at com.sun.enterprise.deployment.backend.EJBCompiler.compile(EJBCompiler.java:222)
     at com.sun.enterprise.deployment.backend.AppDeployer.runEJBC(AppDeployer.java:359)
     at com.sun.enterprise.deployment.backend.AppDeployer.deploy(AppDeployer.java:214)
     at com.sun.enterprise.deployment.backend.AppDeployer.doRequestFinish(AppDeployer.java:129)
     at com.sun.enterprise.deployment.phasing.J2EECPhase.runPhase(J2EECPhase.java:169)
     at com.sun.enterprise.deployment.phasing.DeploymentPhase.executePhase(DeploymentPhase.java:95)
     at com.sun.enterprise.deployment.phasing.PEDeploymentService.executePhases(PEDeploymentService.java:871)
     at com.sun.enterprise.deployment.phasing.PEDeploymentService.deploy(PEDeploymentService.java:266)
     at com.sun.enterprise.deployment.phasing.PEDeploymentService.deploy(PEDeploymentService.java:739)
     at com.sun.enterprise.management.deploy.DeployThread.deploy(DeployThread.java:174)
     at com.sun.enterprise.management.deploy.DeployThread.run(DeployThread.java:210)
|#]when I deployed this application on a custom domain setup, it does not fail. But it fails on default domain.
Regards
Michael

How did you create your datasource, can you post the content, without passwords of course.
Greetings.

Weblogic 10.3.2 Error when deploying ear file

Using WLS 10.3.2, wwhen activating changes, I obtain following errors:
An error occurred during activation of changes, please see the log for details.
Exception occured while downloading files
[DeploymentService:290066]Error occurred while downloading files from admin server for deployment request "1,285,335,764,675". Underlying error is: "[DeploymentService:290065]Deployment service servlet encountered an Exception while handling the deployment datatransfer message for request id "1,285,335,764,675" from server "p8aerm". Exception is: "Could not create temp location for application : Engine-wl"."
Would someone with expertise confirm where "temp location for application" is on an AIX 6.1 server.
Any help appreciated.

What user runs your weblogic? the oracle user?
In my case weblogic is started by a weblogic user who owns all the WLS folders.
Try $> ps -fea | grep p8ce to verify the user running the weblogic instance.
In a RH5 the privileges are (755):
4 drwxr-xr-x 2 weblogic weblogic 4096 Nov 19 2009 .internal
4 drwxr-xr-x 5 weblogic weblogic 4096 Nov 19 2009 WLinternal
4 drwxr-xr-x 8 weblogic weblogic 4096 Nov 23 2009 ..
4 -rw-r--r-- 1 weblogic weblogic 379 Sep 20 16:53 WebServiceUtils.ser
0 -rw-r--r-- 1 weblogic weblogic 0 Sep 20 16:55 SysAdmServer.lok
4 drwxr-xr-x 5 weblogic weblogic 4096 Sep 21 19:28 .
4 drwxr-xr-x 6 weblogic weblogic 4096 Sep 21 19:28 WLuser
The folder WLuser will be created when the deploy starts.
In your case an error happends before this step.

Error when uploading par files - Exception

Hi all,
I'm getting an error when I try to upload any par file of the MSS package through the administration console. The error thrown is:
Messages:
INFO: Detected Portal Archive File: com.sap.pct.hcm.attendanceoverview.par
INFO: Application successfully stored in the PCD
Messages from Server ID 8657950
ERROR: Operation failed: The archive com.sap.pct.hcm.attendanceoverview has not been deployed.
ERROR: Exception caught: com.sapportals.portal.prt.runtime.PortalRuntimeException: [PortalApplicationItem.prepare]: com.sap.pct.hcm.attendanceoverview
The error is displayed in the administration console. The logs don't say anything useful. I'm getting a few exceptions about finding archives and this error message: get data source CVERS failed! Trying SAP/BC_UME...
I have checked the rights to all directories and the directory structure. We're running EP6.0 with SP 9.
Thanks for your time.
regards,
Dion

Hi Dion,
i would think that SAP tries to stop uploads of par files which should be installed with them SDM or import of a whole package.
Try the following :
- rename the par file name from com.sap.... to something else...
or :
- import the par into Developer Studio and change the project name
change/delete the META-INF files
Another question : why do you want to install only certain elements of the MSS package ?
Regards,
Kai

Rapid install gettin error when create control file

hai all ,
i faced problem when im install fresh ebs R12
my environment :
sun sparc 64 bit
solaris 11
this occur when i try to install fresh R12
using rapidwiz , the error say ORA-00821: Specified value of sga_target 1024M is too small, needs to be at least 2100M
and when creating control file failed,
is any clue with this problem ?
all prerequisite reference to doc :
R12.1.1 : Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Oracle Solaris on SPARC (64-bit) (Doc ID 761568.1)
the detail log below this
Log file located at /oracle/PROD/db/tech_st/11.1.0/appsutil/log/PROD_SMJKT-PRFND01/ApplyDatabase_11071358.log
^M
|      0% completed       ^M
/      0% completed       ^M
-      0% completed       ^M
\      0% completed       RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
    RW-50010: Error: - script has returned an error:   1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for PROD instance
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORA-00821: Specified value of sga_target 1024M is too small, needs to be at least 2100M
ORA-01078: failure in processing system parameters
CREATE CONTROLFILE REUSE SET DATABASE "PROD"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0

hai asif,
solved my problem , with this doc
Oracle VM Server for SPARC (previously known as LDoms or Logical Domains) :
To set the number of VCPUs for a given Logical Domain (LDom), use the 'ldm(1M)' with the 'set-vcpu' option:
# /opt/SUNWldm/bin/ldm set-vcpu <number> <logical_domain>
For example to configure eight VCPUs for the Logical Domain named "ebs1":
# /opt/SUNWldm/bin/ldm set-vcpu 8 ebs1
Please review the Logical Domains Administration guide for detailed information.
Users can then revert the number of VPUs to the original or desired values as a post EBS install step.
thanks a lot..
regards
Imrons

Error when rendering my file...

Similar Messages

Maybe you are looking for