Error when REPAIRING DISK

"INVALID LEAF RECORD COUNT"
And repair disk does not seem to fix this. Any ideas what this mean and should I be worried?
Thanks

Yup and in fact it's entirely possible NDD made it worse than helped. That's one of the worst pieces of software for OSX every to hit the market, I've never seen anything so incompetent and useless.
That said, What I think you ought to do before running any further repairs, is at the very least copy your data files onto another drive or a DVD or what ever. Backup what you have regardless of what you think may or may not be corrupted. The last thing you need is any of these tools fixing the drive and ending up with unreadable sectors where your files sit, then you're looking pretty stuck.
Forget cloning and all that, just drag and drop files onto a CD-RW and burn them. You can figure out later which ones are busted, and if you drive does get fixed, then you can toss those.
At this point, I think you have an issue with the drive itself, I think it's more than just corrupted files. So I would seriously consider a replacement drive too. I have only seen a drive not fixable by Disk Utility or DW once, and after formatting it, I could not even install the software on it because of errors the drive was totally kaput.
How old is your drive/machine anyway? Over 3 years?
R

Similar Messages

Invalid Node Error When Repairing Disk - Reinstalled & came back

Hi. Thank you for any help you might be able to give.
Last Friday, I had to shut down my macbook using the power button. It had been running slowly and I couldn't get applications to open. When it came back up, it flashed an "anti" sign. Eventually it started flashing a folder wtih a question mark on it. I booted from the disk and tried to repair it. It froze halfway and I had to restart. I repeated the process, but the disk utility could't repair it. Instead the disk utility told me that there was an invalid node and it couldn't repair it.
I erased the harddrive (the quickest way, not completely) and reinstalled mac os. The computer has been working really well for the past 3 days.
But the problem is back. I turned on my computer this morning to find the gray screen -.- It started flashing the folder with a question mark on it.
Do I need to replace the harddrive? Would that fix the problem? Or is there something else that is causing this problem?
Thank you for any advice.

It certainly could be a problem with the drive, but it could also be a RAM problem (bad RAM can cause intermittent memory failure during disk writes causing the directory to become corrupted.) You can check the SMART status of the drive in Disk Utility. If the SMART status does not say "Verified" then the drive is failing. You can also run the Apple Hardware Test:
Insert the original OS X Installer Disc One that came with the computer. Restart the computer and after the chime press and hold down the "D" key until the diagnostic screen appears. Run the extended diagnostics repeatedly for at least an hour to be sure you pick up any intermittent problems. Note any error messages down for later reference. If there are errors you will need to report them to the Apple tech at your local Apple service center or to AppleCare.
I would also check your console and crash logs using the Console application in the Utilities folder. Check log entries, if any, around the moment that the computer crashed or locked up to see if there were any entries that may provide clues to the cause of the crash.

Strange error when repairing disk permissions

At the end of the repaitr, it says "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired."
What does this mean/what should I do about it?

Hi Rob,
Repair Permissions usually reports all kinds of little tidbits of information that really are not important to users. Permissions on this file system corrected, nothing was done on this one for reasons like Niel gave. The only thing important is when it gets to the end and tells you you are good to go. the intermediate statements are more information than things you need to concern yourself with...of course you can use them just to learn more about the file systems and what they contain if that interests you
Ralph

ERROR when repairing permissions: Group differs on "private/etc/cup"

Hi,
When I run permissions repair on my Leopard 10.5.4 I get the error message:
ERROR when repairing permissions: Group differs on "private/etc/cup", Should be 0, group is 26
Any idea why... It pops up every time I run permissions repair so I don't think it is really getting repaired.
Thanks.

Ignore it. It's been reported as a bug and is under investigation.

What does the message "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired" when repairing disk permissions?

What does the message "Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired" when repairing disk permissions?

It's just a status message, albeit a misleading one, and can be ignored.
http://support.apple.com/kb/TS1448
Regards.

W7: Error creating Repair disk or image "...the parameter is incorrect (0x80070057)

Initial cause of problem was trying to duplicate bootable SD card and it wrote it to C Drive system partition. Finally stumbled around and got system volume rebuilt and got it running again but Recovery partition got deleted in the process. I used W7 Recover/repair since Toshiba options seemed to be to overwrite everything (backup was month old, so wanted to avoid restoring since system files and data were still "there". I can use Toshiba program to make Repair, Recovery and Image copies. However, I cannot use W7 Backup program to make a Repair disk or Image backup. I get the error message: "System Repair disc could not be created The parameter is incorrect (0x80070057)"
I suspose the next thing to try would be to run System file checker since W7 sees a problem that the Toshiba utilities do not detect. Is there any "risk" of running the system file checker (sfc.exe), which also changes permissions on all system files.
I would like to correct any lurking system file problem, but also don't want to take a step backward trying to correct it. I have a W7 Windows disk.
Would appreciate suggestion.... leave alone and trust Toshiba image/recovery DVD I've made, try to correct it or leave well enough alone and hope it doesn't bite me later when I need to do a recovery. Thanks....

Hi! I just got to add my 2 cents! Very nice replies and good information. Nice work Jerry and eagle!
Dokie!
Just one small problem the link has a down load manager. I'll let eagle explain that?? My advise is not to use a down load manager period! If you scroll down to the bottomof the page, you will be fine.
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
Attachments:
Capture48.JPG ‏297 KB
Capture49.JPG ‏146 KB

URGENT!!!!- INTEL MAC "INVALID SIBLING DISK" error when run disk utility

I am very upset, I ran my verify disk permissions, everything fine, repair disk permissions, everything fine, do t periodically just to mae sure all my stuff is in order,,,, then I decided to run te VERIFY DISK, because do not do it as much and want to mae sure my macbook pro is running fine, and I get:
Verifying volume “minimal minimal”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid sibling link
The volume minimal minimal needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
!!!!!!!!!!!!!!! ***?!!!!!!!!!!!!!!!!! there is no way of repairing the disk, and when I search for possible solutons it says I need to run it from the original osx installer disk, and even when it does not necessarily repir this error. besides the fact that the original cd is in atlanta and I am currently in barcelona, some say that I would need to reformat my drive and either way this might not solve the problem. I HAVE WAY TOO MUCH IMPORTANT INFORMATION on my macbook pro to reformat, and i do not have the money to buy an external hardrive, I A VERY UPSET, A BRAND NEW COMPUTER, LESS THAN TWO MONTHS OLD, AND ALREADY I HAVE THESE KIND OF PROBLEMS WITH IT, WHERE IS MY SUPPORT?! please tell me, what do i do? I expect a decent, viable slution to the problem. I need my computer ad the information in it, I work from it and also use it to produce music. why would I have this kind of problem, when I search for answers, everything relates to external hardrives, ..... this is my internal hard drive that I am talking about--- WHAT DO I DO?!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

The available Apple centers in Spain are:
ADEMAC
C Castelló, 109
28006 Madrid
Tel 91 562 11 00
BANANA COMPUTER
C Leon and Castillo, 88
The 35004 Palms of Great Canary
Tel: 928 24 28 28
Fax: 928 24 82 31
BANANA COMPUTER
General boulevard Franco, 141
38001. - Santa Cruz de Tenerife
Tlf.: 922882126
Fax.: 922206782
BENOTAC
C Doctor Castelo, 35
28009 Madrid
Tel 91 308 43 63
BENOTAC
C Babel Nº1, the Premises
29006 Malaga
Tel: 952 04 09 55
Fax: 952 04 13 58
BILBOMICRO
Stolen c of Amezaga, nº 7 low
48008 Bilbao (Biscay)
Tel 94 423 02 13
BILBOMICRO
C Abendaño, 52
01008 Vitoria
Tel 945 28 41 33
BUS Solutions
C Cabrales, 100
33201 Gijón - Asturias
Tel: 985 35 90 85
CTA Serveis
C Consell de Cent, 382
08009 Barcelona
Tel 93 24 40 350
GOLDENMAC
C Bolt, 48
29007 Malaga
Tel 952 42 97 12
GOLDENMAC
Avda. White Carrero, 2
41011 Seville
Tel 95 427 12 13
K-TUIN
C Luis You live 8
50006 Zaragoza
Tel 976 56 72 27
K-TUIN
C Hernandez Lazaro 14
46015 Valencia
Tel 96 385 36 74
K-TUIN
C Muntaner 537 - 541
08022 Barcelona
Tel 93 418 02 03
K-TUIN
C Orense, 52
28020 Madrid
Tel 91 55 56 798
K-TUIN
C Aureliano Valle, 4
48010 Bilbao
Tel 94 410 07 77
Microgestio, LIMITED LIABILITY COMPANY.
C Valencia, 87-89
08029 Barcelona
Tel 93 454 63 63
Rossellimac.
C Painter Lopez Mosque, 12
18002 Granada
Tel 95 829 13 24
SICOS
Pza of Good Shepherd 6
20005 San Sebastián (Guipuzcoa)
Tel 94 344 12 79
Valles Tecnologic, S.A.
Plza. Of the Unio, 3 the Premises 1º
08190 Sant Cugat of Valleys (Barcelona)
Tel 93 590 80 60
Perhaps, since you are under warranty, they may have a boot disk to attempt to run disk utility and see if the problem can be repaired before resorting to reformatting. Disk error may occur because of a number of issues (installed software, crashes, shutdowns, physical movement of the drive while disks spinning, etc.)
In addition you may want to boot in the single user mode to access the FSCK command as follows: The following is from the Apple support site
Mac OS X: How to Start up in Single-User or Verbose Mode
You may use a key combination when starting up the computer to enter single-user mode or verbose mode, either of which can be used for troubleshooting and in software development. This document applies to Mac OS X and Mac OS X Server versions 10.0 and later.
Steps to Enter Single-User or Verbose Mode
1. Shut down the computer if it is on.
2. Press the power button to start the computer.
3. Immediately press and hold the Command (Apple) key and one of the following:
the "s" key for single-user mode.
the "v" key for verbose mode.
4. To exit single-user mode type: reboot
5. Press Return.
You have successfully entered single-user or verbose mode when you see white text appear on the screen.
Then you may try to repair as follows using the FSCK
fsck is a command-line utility that may be able to verify and repair a disk. If you can successfully start up in Safe Mode or use Disk Utility while started up from a disc, you don't need to use fsck. However, here are some situations in which fsck may be necessary.
Your Mac OS X disc isn't available.
Your optical drive isn't available.
You can't start with a Safe Boot.
Tip: If you use a Mac OS X Extended (Journaled) formatted volume, such as with Mac OS X 10.3 or later, you probably won't need to use fsck. If you do use it for any reason, please be aware that benign error messages can appear.
If you're not sure how your volume is formatted and you can't start up from your Mac OS X volume to find out, type the following command in a command-line interface and then press Return: diskutil info /
If you see "File System: Journaled HFS+" returned, you have a Journaled volume.
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
Start up your computer in single-user mode to reach the command line.
Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
At the command-line prompt, type /sbin/fsck -fy
Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
** The volume (nameofvolume) appears to be OK
If fsck found issues and has altered, repaired, or fixed anything, it will display this message:
*** FILE SYSTEM WAS MODIFIED ***
Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
Your computer should start up normally and allow you to log in.
About live verification in Mac OS X 10.4.3 or later
In Mac OS X 10.4.3 or later, you can verify your Mac OS X volume while started from it. This is known as live verification, and can be used in three different ways.
Option 1: Verify your disk using Disk Utility while started from the startup disk. To find out how to do this, see this article. Please note that live verification does not involve any disk repair, so if verification finds something that should be repaired, start up from your Mac OS X Install disc and use Disk Utility as described above in "Try Disk Utility."
Option 2 (advanced): Use the command line and the command-line utility, diskutil.
Start up your computer and log in as an administrator.
Open Terminal (/Applications/Utilities).
At the prompt, type the following command and then press Return:
diskutil verify /
Note: Don't use this method to check non-startup volumes.
You should see messages such as the following during the disk check:
Could not unmount disk for verification, attempting live verify
Started verify/repair on volume disk0s3 Macintosh HD
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
Verify/repair finished on volume disk0s3 Macintosh HD
Option 3 (advanced): Use the command line and the fsck_hfs -l command.
Start up your computer and log in as an administrator.
Open Terminal (/Applications/Utilities).
At the prompt, type the following command and then press Return to determine your filesytem ID:
df -hl
Look for some lines of text that look like this:
Filesystem Size Used Avail Capacity Mounted on
/dev/disk0s3 37G 20G 17G 55% /
/dev/disk0s5 37G 37G 641M 98% /Volumes/Storage
Make a note of the first "disk" name that appears after /dev/, such as "disk0s3." This is your filesystem ID for your startup volume.
At the prompt, type the following command and then press Return:
df -hl
Then type the following command, where "disk0s3" is your filesystem ID you noted in step 4, then press Return:
sudo fsck_hfs -l /dev/disk0s3
When prompted, enter your admin password, then press Return to begin the verification.
You should see messages like these during the disk check:
** /dev/rdisk0s3 (NO WRITE)
** Root file system
** Checking HFS Plus volume.
** Checking Extents Overflow file.
** Checking Catalog file.
** Checking multi-linked files.
** Checking Catalog hierarchy.
** Checking Extended Attributes file.
** Checking volume bitmap.
** Checking volume information.
** The volume Macintosh HD appears to be OK.
Additional Information
If you're interested in UNIX-style command-line syntax, here's a look at how a couple of flags used in our instruction can influence fsck:
The -y flag: Tells fsck that you want to answer "yes" to all questions about fixing, repairing, or salvaging information. This is the optimal approach, as answering "no" to any question causes fsck to stop. You cannot determine that all necessary repairs have been made until fsck completes and gives its final report.
The -f flag: Forces fsck to check "clean" filesystems when preening.
Macbook Pro 17" 7200 HD 1GB Powerbook G4 (15 inch FW 800) Mac OS X (10.4.6)
Macbook Pro 17" 7200 HD 1GB Powerbook G4 (15 inch FW 800) Mac OS X (10.4.6)
Macbook Pro 17" 7200 HD 1GB Powerbook G4 (15 inch FW 800) Mac OS X (10.4.6)

Errors during Repair Disk Permissions

I get the following error messages when trying to repair disk permissions in Leopard (see below).
Does anyone know why this is happening and what I can do to fix it?
Repairing permissions for “OS X Root”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.

These are my error messages
Permissions differ on "System/Library/PrivateFrameworks/GraphicsAppSupport.framework/Versions/A/Frame works/QuartzComposer.framework", should be lrwxr-xr-x , they are drwxr-xr-x .
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
From what I read here, I can ignore the SUID message. What about that first one though. It was not changed (I did a 2nd disk repair after I saw it and got it again). Ignorable, she says hopefully??
Bea

Disk Utility - Input/Output error when creating disk image

Hello!
A few days ago I was unable to turn on my Macbook Pro, and was stuck on the white screen. I've been searching around quite a lot on this forum, and before I try fixing anything, I REALLY need to back-up my files! I just bought a 2TB hard-drive, which I have partitioned to GUID and Mac OS Extended (Journaled), (it perfectly works on another Mac).
I now want to attempt to create an image of my harddrive (Macintosh HD) onto my external drive (which is empty). I've tried doing this both in 'read-only' and in 'compressed', but about halfway through, I receive a message saying "Unable to create 04/2014 backup.dmg (Input/Output) error".
I saw on another similar post that I might want to install DiskDrill or DataRescue. I'm fairly sure this is impossible for me to do, since my screen is completely white, and I'm unable to access my desktop.
I can only access Disk Utility through pressing command+R when starting my computer. Hence, I need to successfully back up my files through Disk Utility...
I'm aware that my HD may be corrupted since this is happening, but there must be a way for me to put an image on my external HD?? A few days ago, when I clicked on Repair Disk it said "Impossible to repair: invalid node structure". But now, it says that "Macintosh HD appears to be OK". I have no idea what's changed... And I can still not start my computer past the white screen...
I'm very bad with IT and computers, and have extensively tried to fix this on my own, but I'm now stuck here, with this "input/output error"...!
Any suggestions would be greatly appreciated! Thank you!
PS: I do not have Applecare, this is an old computer from 2009.

Thanks for your answer.
Yes, I thought that might be the case - but I'd taken my Mac and Logic disks to a Genius bar, and the 'Genius' had said he'd fixed the issue. I just wish he'd explained what he did and why he didn't replace the faulty disk(s)!
But is there any way around having the claim a disk, now I'm living abroad and my 'warrantee' has run out? It's going to be a pain in the fundament trying to claim a replacement set.

Odd errors in repairing disk permissions...

I get the following log when I go to repair my disk permissions:
Repairing permissions for “Mac”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Anyone know what exactly this might mean?
Thanks in advance,
-J

Mac OS X 10.5: Disk Utility's Repair Disk Permissions reports issues with SUID files
http://docs.info.apple.com/article.html?artnum=306925
Quoted from above:
"You can safely ignore these messages. They are accurate but not a cause for concern."

When repairing disk permissions today I got a new warning message . . .

Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Anyone know what the ramifications of this is? What needs fixing and how?

When you run +Repair Disk Permissions+, it is fixing permissions as needed. The other messages are almost always just information - no action needed.
http://support.apple.com/kb/TS1448

Automatic Error when opening Disk Utility

Hi guys, I recently noticed this problem when clicking "Calculate Image Checksum..." in the finder pulldown menu for Disk Utility. I don't open Disk Utility often, so I can't be sure if this error has always existed or if it only has recently began occurring. Anyways, when I open up Disk Utility, it seems as though it is detecting a .dmg file on my desktop named "Desktop.dmg." When opening Disk Utility and calculating image checksum, I automatically get a pop up error saying:
Disk Utility Progress:
Unable to checksum "Desktop". (Operation not supported on socket)
When opening Disk Utility regularly, (by going to Applications -> Utilities -> Disk Utility) the Desktop.dmg file is not there. Is this normal? Is there any way I can prevent the Desktop.dmg from showing up?
Any help appreciated,
Thank you!

ive also noticed that if i have the "Macintosh HD" icon highlighted on the desktop, then attempt to calculate checksum, then when Disk Utility opens up it proceeds to checksum the drive and prompts for my password.
So it seems as though whatever it is that is highlighted in finder, Disk Utility will somehow create a .dmg file with the same name and try to mount it. Since this is not a real disk image, the error pops up. I am very puzzled by this, can anybody give me some insight?

Ipod not recognized in itunes, error message: repair disk

When I connect my ipod to my mac I get an error message saying my mac cannot repair the disk, its asking me to back up the disk and reformat asap. My ipod is not being recognized in itunes but it is in the finder. help!

Thank you so much for trying to help. When I tried to do that, I got this error message when I tried to verify and repair the disk:
Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
How do you go about doing that ^ as in reformating the disk (all of my music is backed up to a hardrive already) Or should I just try and erase the info on my ipod?
Thanks for your help!!!!
-P

Getting this error when repairing permissions. What does it mean????

Hello,
I just ran premissions repair with OSX's disk utility.
What do these errors meana nd are they a serious issue?
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./private/var/log/secure.log, should be -rw------- , they are -rw-r-----
Owner and group corrected on ./private/var/log/secure.log
Permissions corrected on ./private/var/log/secure.log
Permissions repair complete
The privileges have been verified or repaired on the selected volume
MacPro 2.66 Mac OS X (10.4.8) 2G ram.. iSight camera
MacPro 2.66 Mac OS X (10.4.8) 2G ram.. iSight camera

Hi Rich, it sounds like your MacBook is running well after the archive & install.
when the user login screen came up... and it trashed my Adobe CS2/CS3 installs and Parallels.It trashed them? Are you sure it didn't save them in a folder called, "Previous System" on the top level (root level) of your hard drive? Can't you just re-install them?
Also, you should maintain some type of backup, preferably on a firewire hard drive. If you clone your entire system over to one and make it bootable, you never have to worry.
You can also run Apple Hardware Test to set your mind at ease about hardware issues:
Using Apple Hardware Test:
1. Disconnect all external devices from your iMac except the keyboard and mouse.
If you have an Ethernet cable connected, disconnect it.
2. Insert the Mac OS X Install Disc 1 that came with your iMac.
3. Restart your iMac and hold down the D key as your iMac starts up.
4. When the Apple Hardware Test chooser screen appears, select the language
appropriate for your location.
5. Press the Return key or click the right arrow button.
6. When the Apple Hardware Test main screen appears (after about 45 seconds), follow
the onscreen instructions.
7. Apple Hardware Test displays an error code if it detects a problem. Make a note of the
error code before pursuing support options.
I don't know about that CleanApp thingy, not sure you need it for anything,
-mj
[email protected]

Source Material error when burning disk image

Well, I've been haunting these forums for 10 days, finding answers to every darn problem under the sun I've encountered! (thanks folks, I've been near hysteria) Now I have yet another problem, and I cannot find an answer in the forums (sorry if it's there.)
I have built my movie in iMovie, imported to iDVD, created my disk image, played my disk image (worked perfectly), connected my brand new LaCie external burner, loaded Toast 6 Lite, dragged my mounted disk image icon into the window, popped in my Verbatim DVD+R and let 'er rip.
And, poo, I'm informed that 4 files are in an unsupported format and cannot be imported. EH? I thought the disk image kept all self-contained? I press onward, and hit burn. Churning, churning... and then this message:
"Could not record disc because there is a problem with the source material. Result code= -18774"
Trying to burn via Disk Utility doesn't work either. My mounted disk shows up, but when highlighted the burn button is grayed out. Only when I click on the .img file is the burn option lit.
Am I supposed to drag the .img file rather than the mounted little disc icon? PLEASE HELP. These movies were SUPPOSED to be Xmas presents... now I'm praying for Michaelmas gifts!
TIA

ohmygosh. Lightbulb! I've been trying to burn the file_name one and not the file_name.img one. I assumed the point of mounting the file was to burn it, but it's only to preview it, yes?? So, I did that via Disk Utility, and it worked!! Only thing I can't figure is how to set the burn speed. I know slower is better, but can't find the place to tell it the speed. It never asks.
Toast still gives me the source material error. I do have the 'video' tab selected, and I've done the drag-n-drop method AND the 'add' method ('copy' is only for transferring data from one CD/DVD to another in my version, evidently). Toast doesn't allow me to grab the .img file, so I'm assuming IT wants the mounted file_name one? I'd still like to be able to use Toast to burn, so a solution to this would be appreciated. I'm using Toast 6 Lite, BTW.

Error when REPAIRING DISK

Similar Messages

Maybe you are looking for