Error when RFC adapter calling the BAPI
Hi freinds
Today when I was executing my scenario ( File -- XI -- RFC ), I got following error ::
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: JCO.Exception while calling Z_BAPI_POS_AUTOMATION in remote system (RfcClient[RFC_Connection_SAPR3_DEV]):com.sap.mw.jco.JCO$Exception:(104) RFC_ERROR_SYST
Before this error I executed my scenario 2-3 times without any errors.
I found that in RWB the message status was "Waiting". SO I checked the Component monitoring & found this error in Self Test Status ( the symbol was RED )-->
java.lang.ArrayIndexOutOfBoundException: -1 ( Not copied from the original error message )
I clicked the "Repeat Self Test" button & the status become green so I checked my message again. Now it was successfull but in 2 retries it was giving the JCO error & after the Self test ( 3rd retry) it went fine.
I didn't change anything else other than Self test.
This happened two times with me today. Can anyone tell me the reason behind this & what will be the permanent solution of
this. Is this related to some memory dumping ? Is their anything like clearing memory for adpaters in XI.
Best Regards
Lalit
Could you pls check whether a short dump occured in the target system.
Go to ST22 in the target system and check.
Thanks,
Renjith
Similar Messages
-
i am trying to generate purchase order and i create a BAPI also which is active.
But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".Hi,
Yeah i tried my Z_BAPI in R3 and then giving some ERROR.
This is my CODE-
FUNCTION ZBAPIPOTV2.
*"*"Local Interface:
*" IMPORTING
*" VALUE(POHD) TYPE ZPOHD OPTIONAL
*" VALUE(POITEM) TYPE ZPOITEM OPTIONAL
*" TABLES
*" RETURN STRUCTURE BAPIRET1 OPTIONAL
data: ls_pohd type bapimepoheader,
ls_pohdx TYPE bapimepoheaderx,
lt_poit TYPE TABLE OF bapimepoitem,
lt_poitx TYPE TABLE OF bapimepoitemx,
ls_poit TYPE bapimepoitem,
ls_poitx TYPE bapimepoitemx.
MOVE-CORRESPONDING pohd to ls_pohd.
MOVE-CORRESPONDING poitem to ls_poit.
ls_pohdx-comp_code = 'x'.
ls_pohdx-doc_type = 'x'.
ls_pohdx-vendor = 'x'.
ls_pohdx-purch_org = 'x'.
ls_pohdx-pur_group = 'x'.
ls_poit-po_item = '00010'.
APPEND ls_poit to lt_poit.
ls_poitx-po_item = '00010'.
ls_poitx-po_itemx = 'x'.
ls_poitx-material = 'x'.
ls_poitx-plant = 'x'.
ls_poitx-quantity = 'x'.
APPEND ls_poitx to lt_poitx.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
POHEADER = ls_pohd
POHEADERX = ls_pohdx
* POADDRVENDOR =
* TESTRUN =
* MEMORY_UNCOMPLETE =
* MEMORY_COMPLETE =
* POEXPIMPHEADER =
* POEXPIMPHEADERX =
* VERSIONS =
* NO_MESSAGING =
* NO_MESSAGE_REQ =
* NO_AUTHORITY =
* NO_PRICE_FROM_PO =
* PARK_COMPLETE =
* PARK_UNCOMPLETE =
* IMPORTING
* EXPPURCHASEORDER =
* EXPHEADER =
* EXPPOEXPIMPHEADER =
TABLES
RETURN = return
POITEM = lt_poit
POITEMX = lt_poitx
* POADDRDELIVERY =
* POSCHEDULE =
* POSCHEDULEX =
* POACCOUNT =
* POACCOUNTPROFITSEGMENT =
* POACCOUNTX =
* POCONDHEADER =
* POCONDHEADERX =
* POCOND =
* POCONDX =
* POLIMITS =
* POCONTRACTLIMITS =
* POSERVICES =
* POSRVACCESSVALUES =
* POSERVICESTEXT =
* EXTENSIONIN =
* EXTENSIONOUT =
* POEXPIMPITEM =
* POEXPIMPITEMX =
* POTEXTHEADER =
* POTEXTITEM =
* ALLVERSIONS =
* POPARTNER =
* POCOMPONENTS =
* POCOMPONENTSX =
* POSHIPPING =
* POSHIPPINGX =
* POSHIPPINGEXP =
* SERIALNUMBER =
* SERIALNUMBERX =
* INVPLANHEADER =
* INVPLANHEADERX =
* INVPLANITEM =
* INVPLANITEMX =
ENDFUNCTION.
i am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)". -
Hi XIer,
I am using RFC receiver to make a BAPI call, I used a BAPI wrapper due to this BAPI don't have a RETURN structure in the Export Tab which is XI expected.
but after I made a wrapper, the same error occurs, just like I directly call the BAPI without wrapper function. the error as following:
com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.af.rfc.util.bapi.BapiException: Parameter with name RETURN not found.
at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:456)
at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:131)
at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:848)
at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
the BAPI name is :QIRF_GET_USAGE_DECISION2
the wrapper name is :ZZQIRF_GET_USAGE_DECISION2
and I added a RETURN structure, type is BAPIRET2.
Please give me some ideas, thank you for your time~~I still am not sure why you need a Wrapper RFC? If SP 14 or above on XI, RFC adapter have the option of BAPI commit and this will make things easy for you.
You can call the BAPI directly.
regards
Bhavesh -
An error occurred when attempting to call the providers register function. (WWC-43134
Dear All,
While i'm trying to register my provider i got the following exception:
An error occurred when attempting to call the providers register function. (WWC-43134)
The following error occurred during the call to Web provider: oracle.webdb.provider.v2.utils.soap.SOAPException: Can't read deployment properties for service: UserRegister_Provider
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.locateService(Unknown Source)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.processInternal(Unknown Source)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.process(Unknown Source)
at oracle.webdb.provider.v2.adapter.SOAPServlet.doSOAPCall(Unknown Source)
at oracle.webdb.provider.v2.adapter.SOAPServlet.service(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
(WWC-43147)
Any help will be appreciated.
Regards,
Mohammed AminMohammed,
Make sure the file called UserRegister_Provider.properties does exist in your WEB-INF/deployment directory. The easiest way of creating it is: create a copy of the default.properties file, rename it, and specify the location of your provider definition file (usually provider.xml): definition=<providerlocation>
Hope this helps.
Peter -
An error occurred when attempting to call the providers register function.
Hi
I am getting the following error while registering the Portlet to a WSRP portal.
]An error occurred when attempting to call the providers register function. (WWC-43134)
An error occured during the call to the WSRP Provider: Java stack trace from root exception:
java.rmi.ServerException: Internal Server Error (caught exception while handling request: oracle.webdb.wsrp.server.ContainerRuntimeException: An internal error has occurred in method <init>)
at com.sun.xml.rpc.client.StreamingSender._raiseFault(StreamingSender.java:384)
at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:245)
at oracle.webdb.wsrp.WSRP_v1_Registration_PortType_Stub.register(WSRP_v1_Registration_PortType_Stub.java:183)
at oracle.webdb.wsrp.client.design.v1.OraWSRP_v1_Registration_PortType.register(Unknown Source)
. (WWC-43273)
I have done all the required configuration which includes the following.
1. Installation of Infrastructure.
2. Installtion of Portal.
3. Created OC4J_WSRP instance on Portal_Home, configured DAD which is UP.
4. Deployed the application which URL while registering giving me the above year.
Can anybody give me an Instant Solution.I am receiving the same error messages under the same conditions.
I have not not added any .jar files to the database and do have invalid 'java class' objects in my 'user_objects' table/view.
A 'Troubleshooting Pdk Services for Java' article (search OTN for WWC-43134) mentions
'recompiling the invalid objects'. How does one do this? -
Error when i am calling BAPI_GOODSMVT_CREATE through JCO
Hi experts,
Error:-604 Item 001 Ntwk actvty 9000006262 0050 budget exceeded
When we post Goods Receipt or Invoice using BAPI_GOODSMVT_CREATE/BAPI_INCOMINGINVOICE_CREATE we are getting the above error message.This error message generating when i call the BAPI through JCO.
I have tested from front end SAP transcation MIGO and also entered data manually in BAPI
through SE37, Goods receipt is created successfully, I feel background run created problem when BAPI called from JCO.
Please any can suggest me the solution.Hi Narasimh,
I suggest to put breakpoints in the BAPI, so that you can be sure that the expected BAPI is called and check the runtime values of the variable/fields as expected.
As it seems from the error that the "budget exceeded" is a functional error.
Please do the above and let me know whether you found the solution.
Regards,
Prashil -
Error when using PPR in the OA page developed.
HI,
We are encountering an error when using PPR for the custom OA page being developed. I am using JDeveloper version 9.0.3.5(Build 1437) and Oracle Applications version 11.5.10.CU2. The scenario we are using PPR and the steps to reproduce the issue is mentioned below,
Scenario:
1) PPR is enabled for a custom OA page that is developed.
2) The PPR is being used to enable or disable a particular field based on the
selection of a value in a poplist in the same OA Page.
Error replication steps:
1) The user enters a value in the primary mandatory field which has to have
unique value.
2) The user selects a value from the poplist of a field which has PPR associated.
3) The user enters data in all other mandatory fields in the OA page except one
and tries to save the form and is shown a error message saying that all
mandatory fields are not entered(This is correct). Now the page gets
automatically refreshed and so the entered values are wiped off.
4) Now if the user again enters a value in the primary mandatory field (as in
step1) and if that value happens to be already existing value and then select
a value from the poplist which has PPR enabled then immediately the error
"Please enter a unique value" is entered, though we did not save the record.
The unique record validation would happen only at the time of saving the
record as per out business logic.
5) But if in Step 4 if i had entered a unique value again then the above said error
does not happen. There are few more similar kind of issues happening in the
same page because PPR is enabled.
Please note that this issue happens only when the page is deployed in a oracle
applications instance and not in JDeveloper.
Would this issue because of some cacheing problem? If Yes then how do we resolve it? Or would it be some other problem caused by our internal coding.
Any inputs for resolving this issue would be highly appreciated.
Thanks, Raja.What works in Jdeveloper should work when deployed in iAS as well.
And PPR is an old feature given quite enough time to mature, so before we suspect OA we should investigate the code. What I do not understand is how the page refreshes in Step 3 and why does the user have to re-enter the fields just because he missed entering one mandatory field the last time.
Mandatory field validations are client validations set by making the fields 'Required'. You obviously have client validations turned off on your PPR, otherwise you would be stuck with a javascript popup on PPR. The only way you can get the "Please enter unique..." error on PPR is Server Validation. So where have you placed this validation? If it is not in the EO, is it in the AM? And are you unconditionally calling the AM validation method in your processFormRequest? The PPR will also go through processFormRequest so I hope the PPR event is in a different if-else block. -
The SharePoint item being crawled returned an error when attempting to download the item.
I get this error when I run full crawl.
The SharePoint item being crawled returned an error when attempting to download the item.
I did make sure that the crawl account has full read access to the web application. I am able to access the page and site just fine from a browser. I am not sure what is causing the problem.On closely looking at ULS logs, this is what I am noticing....
CSTS3Accessor::Init: SharePointError found in URL
http://xxxxx/default.aspx header value 0, hr=8004FD0F [sts3acc.cxx:566] d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx
CSTS3Accessor::Init fails, Url sts4://xxxx/siteurl=/siteid={c011d5c9-9019-41e8-bf5a-5176739b2b79}/weburl=xxxxx/webid={e42001c0-2ef1-4a8e-8fe5-361d72fa60c2}, hr=8004FD0F [sts3handler.cxx:312] d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx
CSTS3Handler::CreateAccessorExD: Return error to caller, hr=8004FD0F [sts3handler.cxx:330] d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx -
I keep getting this error when I click on the link inviting me to join a Photo Stream: "An error occurred while joining the Photo Stream. Please try again later."
I was the one who set up the Photo Stream and sent the link to myself. I called Apple and they said I did everything right and the server must be temporarily down, but it has been the same for the better part of a day.None of the fixes above worked for me. Continued getting the "try again" error message.
Tryed a bunch of things, such as going directly to icloud on Safari to open the mail message, no luck.
Tryed the following;
Went to iCloud and logged in via Safari, clicked on my account name in top right corner, selected "Advanced" on drop down menu, and selected "Reset Photo Stream".
Turned off Photo Stream on all devices and iPhoto.
Turned on Shared Photo Stream option on Mac iCloud preferences.
Tried the "Join This Photo Stream" button in my Mac Mail app .me account again.
Still got the error message.
Forwarded the original mail message to a yahoo account, selected "Join this Photo Stream" in the yahoo account mail (still in my Mac Mail app), and lo and behold, iPhoto opened and displayed the photos.
Could be this would have worked right from the start.
Oh yea, still get the "try again" message if I click on the Photo Stream button in my .me account. -
Error when trying to access the RBAC User editor and Message tracking
Hi,
I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue.
https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
I then checked the event logs on the server and saw the below error logged;
Current user: 'Domain/Server Services Accounts/administrator'
Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
--- End of inner exception stack trace ---
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.default_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
Any ideas as to what the above event log is specifically referring to?Hi,
From your description, I would like to clarify the following thing:
If you want to search message tracking logs, the account you use should be a member of the role groups below:
Organization Management role group, Records Management role group, Recipient Management role group.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
I am getting an error when trying to install the current updates.
Why don't you try telling us what the error is...
Check this document for troubleshooting information: http://support.apple.com/kb/ts3694 -
Hi All - After the upgrade, I am getting SP-Crawl Error for certain links. I check the Crawl component has proper permission.
Google is showing some article like
http://blog.karstein-consulting.com/2012/04/20/error-in-crawl-log-the-sharepoint-item-being-crawled-returned-an-error-when-attempting-to-download-the-item/
not sure if this resolution is referring to 2010 and/or 2013.
I checked the registery editor. I couldn't find 14.0 under the Office Server.
Any clue?
Regards,
Khushi
KhushiI checked the web application policy the search crawl account has full read permission.
Crawl
Fiddler
Log Error referring the Correlation ID
01/06/2014 13:05:06.14 w3wp.exe (0x1698) 0x0118 SharePoint Foundation
Monitoring nasq Medium Entering monitored scope (Request (GET:/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD)).
Parent No
01/06/2014 13:05:06.14 w3wp.exe (0x1698) 0x0118 SharePoint Foundation
Logging Correlation Data xmnv Medium Name=Request (GET:<SiteURL>/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD) e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.14 w3wp.exe (0x1698) 0x0118 SharePoint Foundation
Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.15 w3wp.exe (0x1698) 0x1738 SharePoint Foundation
General af71 Medium HTTP Request method: GET e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.15 w3wp.exe (0x1698) 0x1738 SharePoint Foundation
General af75 Medium Overridden HTTP request method: GET e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.15 w3wp.exe (0x1698) 0x1738 SharePoint Foundation
General af74 Medium HTTP request URL: /sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.17 w3wp.exe (0x1698) 0x1738 SharePoint Foundation
Files aise3 Medium Failure when fetching document. 0x80070090 e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.17 w3wp.exe (0x1698) 0x1960 SharePoint Foundation
Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:<SiteURL>/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD)).
Execution Time=20.5461867360237 e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.17 w3wp.exe (0x1698) 0x1960 SharePoint Foundation
Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:<SiteURL>/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD)).
Execution Time=29.917489513332 e8b1679c-0476-70d4-9fcd-2549ba3ee9d4
01/06/2014 13:05:06.17 w3wp.exe (0x1698) 0x1960 SharePoint Foundation
Monitoring nasq Medium Entering monitored scope (Request (GET:<SiteURL>nsurance%20Benefits%2fLife%20Insurance%2fBasic%20Life%20and%20ADD&FolderCTID=0x01200039DA632EEACF264685CF39D68A18F7C8)).
Parent No
Any clue?
Regards,
Khushi
Khushi -
After installing a new hard drive in my 2011 macbook pro, I'm getting a apple.com/support -2003F error when trying to run the internet recovery. Any suggestions?
Did you format the new HDD? What is the status of the old HDD?
Do you have an early or late 2011 MBP?
Ciao. -
I keep getting an error when trying to receive the new update iOS7 on iPhone5. Any suggestions?
Do the update using iTunes on your computer.
Plug your iPhone into iTunes (current version), let it sync, then click "Check for Updates" on the iPhone's summary page in iTunes. -
I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before
Solution:
Open Disk Utility.
Select your external hard disk and run a “verify” on it. After a few minutes (depending on the size of your drive), you should be good to go. You don’t need to run a “repair” on it... (at least I didn’t have to). See photo for reference.
This should fix the permissions issue, because on my Mac running Mountain Lion I was unable to edit the permissions in the get info dialog window even after "unlocking" the drive.
Maybe you are looking for
-
My iPod touch will no longer connect to the App Store. WiFi connection is not the problem. Also, when opening iTunes it says it does not recognize the server and warns of a possible imitation site... How can I restore the access to the App Store?
-
I have a lenova G570 and recently a black line appeared from top to bottom of my screen. It has gradually got wider and when looking at it up close there are thin short black horizontal lines. Can someone tell me what this is and how to cure it.
-
Slide show in PowerPosint for mac 2011 on iMac will not open full screen mode on secondary monitor. Regardless of how I set the slide show preferences it always opens on primary monior with secondardy monitor having totally balck screen. Need some
-
Hi The CRM Slaes Order if we change anything its not distributing R/3( there is no sale order is created up to now) at the same time its not throwing any Bdoc error it very strange situation. In Bodoc message no upload into R/3 For this I checked
-
OC4j is not running for OBI10g
Hi Gurus, I wanted to launch the OC4J, but I got an error 11/04/01 15:01:58 java.lang.Exception: Could not find tag PerfDll in fileC:\Orac leBI\systemsmanagement\resources\performance\perf_OracleBIPresentationServer.xml Indeed, this file does not con