Error when running a game in Windows

I installed SW Galactic Battlegrounds on my Windows partition (which I created using Boot Camp), which is running XP SP2. It played fine until a few minutes into the game, when it just randomly quit, giving the error message "Windows has encountered an error and must close." It exited the game, but the music is still playing in the background. However, no trace of it remains in Task Manager (go figure). I downloaded and installed the patch for the game, but it hasn't helped. I checked the system requirements, and it only requires 32MB of RAM (the game's a classic, what can I say). I'm not running any other programs. Basically, I have no idea why the game keeps quitting randomly, but it seems that no matter what I try, it still creates this error. Any ideas?

Well, I contacted Lucasarts about this problem, and all they could say is that "This product is not currently supported using the Apple Boot Camp Application." That doesn't make sense to me. If it's installed on a Windows partition, shouldn't it be able to run? Is there something technical going on, because Windows is running on a Mac machine, that would prevent the game from being able to run properly?

Similar Messages

Verification error when run the game after download the jad/jar by OTA on BB 8300

On BB 8800, the jad/jar can be downloaded to the device, when run the game, there is a error msg "Error starting xxxx Module xxxx has verification error xxxx at offset xxxx", the version is OK on BB 8310, but failed on BB 8800 and 8300. I make the version by using proguard 3.8 and WTK22 preverify. I try RAPC preverify and failed again, use proguard 3.3.2 failed too.It seem that it is a compatible problem.
I check the article "Support - MIDlet has verification error at offset", and have no harvest.
BTW, the alx/jad/cod format works fine on BB 8800 and 8300.
How to fix the bug?
Thanks for your help.

Hello,
I gather for your lack of details that you are wanting to get an application that you have written working on the device?
Otherwsie can you specify the name of the application and the details of the error. Someone may have expericne with it.
Lacking this however, the software needs to be fixed.
You'll have better luck looking on the Java forums, not here...
Checked out my Blackberry FAQ's and Links to Needed Articles here
http://darkeen.homelinux.com/index.php/Blackberryfaq

Error when run adobe livecycle trial windows server 2012

hi i got this error when i try to install adobe livecycle :
invocation of this java application has caused an invocationtargetexception
when i click more details it show this :
ZeroGu2: Windows DLL failed to load
          at ZeroGa2.b(DashoA10*..)
          at ZeroGa2.b(DashoA10*..)
          at com.zerog.ia.installer.LifeCycleManager.b(DashoA10*..)
          at com.zerog.ia.installer.LifeCycleManager.a(DashoA10*..)
          at com.zerog.ia.installer.Main.main(DashoA10*..)
          at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
          at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
          at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
          at java.lang.reflect.Method.invoke(Method.java:597)
          at com.zerog.lax.LAX.launch(DashoA10*..)
          at com.zerog.lax.LAX.main(DashoA10*..)
system :
adobe livecycle es 4 trial jboss
windows server 2012
jdk 1.7
jre 7
Regards

ES4 is not supported on Windows Server 2012. Please check platform matrix @ http://helpx.adobe.com/livecycle/help/livecycle-es4-supported-platforms.html
Thanks,
Pankaj Parashar

Error when run java file on windows 7 64bit

unexpected failure: Error:Only x32 JVM supported
java.io.IOException: Error:Only x32 JVM supported
at com.adobe.air.ipa.IPAOutputStream.addInitialContent(IPAOutputStream.j
ava:142)
at com.adobe.air.ipa.IPAOutputStream.addFile(IPAOutputStream.java:96)
at com.adobe.air.ADTPackager.createPackage(ADTPackager.java:47)
at com.adobe.air.ADT.run(ADT.java:176)
at com.adobe.air.ADT.main(ADT.java:141)
can anyone help with the error please ?

Hi thanks your replies I have uninstalled jre-6u20-windows-x64 again and I open the 32 bit version of IE8 and went to the java.com ran the installation checker and is recommended re-U-windows-I-gift-rv I have already downloaded this app and installed. B ut I still tried to install it and the installation process say its already installed. I ran the test applet and everything works fine.
When I run the java file from cmd
java -jar fai-packager.jar -package -target ipa-test -storetype pkcs12 -keystore c:/project/iphone_dev.p12 iLife.ipa c:/project/iLife-app.xml -C c:/project/ iLife.swf -C C:/project/icons . -C C:/project Default.png
I get this error message
'java' is not recognized as an internal or external command,
operable program or batch file.
The only way I can get the java to run is by installing the jre-6u20-windows-x64 update

Error when running extract paramfile on windows

can somone please tell me what uncognized parameter is?
E:\GGS>extract.exe PARAMFILE dirprm\inext.prm REPORTFILE dirrpt\inext.rpt
Oracle GoldenGate Capture for SQL Server
Version 11.2.1.0.1 OGGCORE_11.2.1.0.1_PLATFORMS_120423.0230
Windows x64 (optimized), Microsoft SQL Server on Apr 23 2012 07:48:51
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
Starting at 2013-03-22 12:55:12
Operating System Version:
Microsoft Windows Server 2008 Enterprise Edition, on x64
Version 6.0 (Build 6002: Service Pack 2)
Process id: 3648
Description:
** Running with the following parameters **
2013-03-22 12:55:12 INFO OGG-03035 Operating system character set identifie
d as windows-1252. Locale: en_US, LC_ALL:.
Source Context :
SourceModule : [er.init]
SourceID : [er/init.cpp]
SourceFunction : [get_infile_params]
SourceLine : [2812]
ThreadBacktrace : [7] elements
: [E:\ggs\gglog.dll(??1CContextItem@@UEAA@XZ+0x31
3f) [0x00000001801075AF]]
: [E:\ggs\gglog.dll(?_MSG_ERR_STARTUP_PARAMERROR_
ERRORTEXT@@YAPEAVCMessage@@PEAVCSourceContext@@PEBDW4MessageDisposition@CMessage
Factory@@@Z+0xd3) [0x000000018003E893]]
: [E:\ggs\extract.exe(ERCALLBACK+0x153c5) [0x0000
0001400AC3A5]]
: [E:\ggs\extract.exe(shutdownMonitoring+0x1b683)
[0x00000001400E0F33]]
: [E:\ggs\extract.exe(VAMRead+0x92280) [0x0000000
14032D0B0]]
: [C:\Windows\system32\kernel32.dll(BaseThreadInitThun
k+0xd) [0x0000000077A9B1BD]]
: [C:\Windows\system32\ntdll.dll(RtlUserThreadStart+0x
21) [0x0000000077BD6861]]
2013-03-22 12:55:12 ERROR OGG-00303 Unrecognized parameter.
2013-03-22 12:55:12 ERROR OGG-01668 PROCESS ABENDING.

never mind, it's just a parameter

Error when running MMO game on my Mac

The MMO game from the website I downloaded is not working on my mac.
I'm on a Mac Snow Leopard. Help would very much be appreciated.
Please advise.

You've got to be kidding, right? How do you expect us to help if you don't give us the name of the game or tell us how it isn't working? For that matter, this would be more appropriately asked on a forum related to the game.

SQL serever 2012 Setup has encountered an error when running a windows installer file

I am trying to install SQL server 2012 Express on a windows 7 PC for 2 days now. I feel like banging my head against the wall.
I keep getting the following errors here's the full log
The following error has occurred:
SQL Server Setup has encountered an error when running a Windows Installer file.
Windows Installer error message: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'. Please refer
to Help and Support for more information. HRESULT: 0x8007054F. Windows Installer file: C:\Users\Receno\AppData\Local\Temp\SQL Server 2012\Setup\1033_ENU_LP\x64\setup\sqlsupport_msi\SqlSupport.msi Windows Installer log file: C:\Program Files\Microsoft SQL Server\110\Setup
Bootstrap\Log\20150109_213740\SqlSupport_Cpu64_1_ComponentUpdate_1.log
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDC80C325

hmmm..so which hotfix do I apply ?
SQL Server 2012
All (Global) x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global) x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global) x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global) x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global)
x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
<input id="chk471373" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
<input id="chk471368" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
<input id="chk471370" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
<input id="chk471371" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
<input id="chk471374" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
<input id="chk471372" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
<input id="chk471369" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
<input id="chk471367" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global)
x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
<input id="chk471373" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
<input id="chk471368" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
<input id="chk471370" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
<input id="chk471371" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
<input id="chk471374" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
<input id="chk471372" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
<input id="chk471369" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
<input id="chk471367" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global)
x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
<input id="chk471373" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
<input id="chk471368" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
<input id="chk471370" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
<input id="chk471371" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
<input id="chk471374" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
<input id="chk471372" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
<input id="chk471369" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
<input id="chk471367" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86

Error connecting to Oracle from when running SSIS Package on Windows 64-bit

Hi.
I have an SSIS (SQL Server Integration Services) Package that reads a view on Oracle and loads data into table in SQL Server 2005. This is on a Windows 2008 Server (64-bit). SQL Server 2005 with SP3. Oracle Client 11g (32 bit & 64 bit) Runtime Version installed on server. The server has been rebooted since installing OracleClient.
I get the following error when run as a SQLAgent job 64 Bit (Execution type SQL Server Integration Services Package)...
Started: 9:29:24 AM
Error: 2010-01-04 09:29:25.37
Code: 0xC0202009
Source: SADM_CURR_Address_and_Cell_Phone-Oracle Connection manager "Oracle/PeopleSoft"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2010-01-04 09:29:25.37
Code: 0xC020801C
Source: DFT-Oracle to SS2005 OLE DB Source [1]
Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Oracle/PeopleSoft" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
End Error
Error: 2010-01-04 09:29:25.37
Code: 0xC0047017
Source: DFT-Oracle to SS2005 DTS.Pipeline
Description: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
End Error
Error: 2010-01-04 09:29:25.37
Code: 0xC004700C
Source: DFT-Oracle to SS2005 DTS.Pipeline
Description: One or more component failed validation.
End Error
Error: 2010-01-04 09:29:25.37
Code: 0xC0024107
Source: DFT-Oracle to SS2005
Description: There were errors during task validation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 9:29:24 AM
Finished: 9:29:25 AM
Elapsed: 1.108 seconds
When I execute this same exact package as a SQLAgent job 32-bit (type Operating System CmdExec) it runs successfully. When I run the package using the Execute Package Utility, it runs successfully. When I am editting the package in BIDS I can connect to Oracle. For both 64 and 32 bit, I use a dtsconfig file which specifies the Oracle connection string and password.
Someone mentioned on another forum that maybe there is no Oracle ODBC driver for 64-bit Windows. I would assume that the OracleClient 64-bit would include that.
I hope I have included all info needed. Please let me know if you may have a resolution to this problem.
Thanks.
John

I was trying to transfer data from oracle to sql server 2008 on a daily basis.
I have very hard time connecting to oracle from ssis package on windows server 2008. I am almost dead and cannot find any help. i was able to connect to oracle using import/export 64 bit feature of SQL Server 2008 using Oracle provider for OLEDB. But I am not sure why the same does not work with BIDS?
Here's the environment info:
1. Oracle Client 10g
2. SQL Server 2008
3. Windows Server 2008
Appreciate your help. Please save me.
Thanks,

Error when running Stellarium with Intel GPU

I'm trying to run Stellarium on a 2009 desktop computer with an Intel GPU, but I get the following error message:
Your OpenGL subsystem has problems. See log for details. Ignore and suppress this notice in the future and try to continue in degraded mode anyway?
This is the log file:
2015-02-02T20:03:51
Linux version 3.18.4-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jan 27 20:45:02 CET 2015
Compiled using GCC 4.9.2
Qt runtime version: 5.4.0
Qt compilation version: 5.4.0
Addressing mode: 64-bit
MemTotal: 8101092 kB
MemFree: 154528 kB
MemAvailable: 4217808 kB
SwapTotal: 0 kB
model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
cpu MHz : 2997.000
model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
cpu MHz : 2997.000
00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
Kernel driver in use: i915
stellarium
[ This is Stellarium 0.13.2 - http://www.stellarium.org ]
[ Copyright (C) 2000-2014 Fabien Chereau et al ]
Writing log file to: "/home/fturco/.stellarium/log.txt"
File search paths:
0 . "/home/fturco/.stellarium"
1 . "/usr/share/stellarium"
Config file "/home/fturco/.stellarium/config.ini" does not exist. Copying the default file.
Config file is: "/home/fturco/.stellarium/config.ini"
Detected: OpenGL "2.1"
Driver version string: "2.1 Mesa 10.4.3"
GL vendor is "Intel Open Source Technology Center"
GL renderer is "Mesa DRI Intel(R) Q35 "
GL Shading Language version is "1.20"
MESA Version Number after parsing: 10.4
Mesa version is fine, we should not see a graphics problem.
GLSL Version Number after parsing: 1.2
This is not enough: we need GLSL1.30 or later.
You should update graphics drivers, graphics hardware, or use the MESA version.
Else, please try to use an older version like 0.12.4, and try there with --safe-mode
You can try to run in an unsupported degraded mode by ignoring the warning and continuing.
But more than likely problems will persist.
Aborting due to OpenGL/GLSL version problems.
I'm using xf86-video-intel version 2.99.917-1 at the moment.
$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02)
I also get extremely slow performances when running 3D game Xonotic, but I don't know if it's due to the same problem. Any suggestion?

It seems that my GPU (Intel GMA 3100) is not supported anymore. See https://answers.launchpad.net/stellarium/+faq/2570: "Graphics cards which are no longer supported by Stellarium 0.13 and later include early ATI/AMD Radeon cards up to and including the Xxxx series (built 2004/05), NVidia up to GeForce FXxxx (2003/04), and Intel GMA before X3000, unfortunately also including the popular Atom-based netbooks of 2010."

Getting an Error When Running Server 2012 R2 adprep /forest prep on a 2012 DC

I am getting an error when running adprep /forest prep on a Server 2012 domain controller. The main parts of my domain are as follows:
2 - Domain Controllers running Server 2012
1 - Exchange Server 2013 running on Server 2012
I am trying to either do an in-place upgrade to my domain controllers to Server 2012 R2 or even introduce a Server 2012 R2 domain controller into the domain. The error I am getting is as follows:
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_search_s() finished, return code is 0x20
[2014/04/05:09:12:38.873]
Adprep verified the state of operation cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_modify_s(). The entry to modify is CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_modify_s() finished, return code is 0x13
[2014/04/05:09:12:38.905]
Adprep was unable to modify some attributes on object CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[User Action]
Check the log file ADPrep.log in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
[2014/04/05:09:12:38.936]
Adprep encountered an LDAP error.
Error code: 0x13. Server extended error code: 0x20b1, Server error message: 000020B1: AtrErr: DSID-030F112A, #1:
0: 000020B1: DSID-030F112A, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 9086f (msDS-ClaimIsValueSpaceRestricted)
DSID Info:
DSID: 0x181112dd
ldap error = 0x13
NT BUILD: 9600
NT BUILD: 16384
[2014/04/05:09:12:38.967]
Adprep was unable to update forest information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
[User Action]
Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
Any Help would be appreciated. Thanks!

Hi,
did you check which servers has FSMO roles?
You can do that via command prompt: netdom query fsmo
For forestprep you must do that on DC which have Schema Operations marter role.
Command
Domain controller
Number of times to run the command
adprep /forestprep
Must be run on the schema operations master for the forest.
Once for the entire forest
adprep /domainprep
Must be run on the infrastructure operations master for the domain.
Once in each domain where you plan to install an additional domain controller that runs a later version of Windows Server than the latest version that is running in the domain.
Note
Domains where you will not add a new domain controller will be affected by adprep /forestprep, but they do not require you to run adprep /domainprep.
http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx

Getting the below error when running the Baseline.grf for the first time

I am getting the below error when running the Baseline.grf for the first time.
Appreciate your support in resolving it.
Error below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Baseline.grf
INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Baseline)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
INFO [RUN_GRAPH1_0] - Checking graph configuration...
INFO [RUN_GRAPH1_0] - Graph configuration is valid.
INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
java.lang.NullPointerException
     at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
     at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
     at org.jetel.graph.Phase.free(Phase.java:487)
     at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
     at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
     at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
     at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
     at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
     at org.jetel.component.RunGraph.execute(RunGraph.java:302)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
ERROR [WatchDog] - Node RUN_GRAPH1 error details:
org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
     at org.jetel.component.RunGraph.execute(RunGraph.java:324)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 2 20132
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !

It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
#echo $CLOVER_LIB/*
for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
     LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
done;
#for i in `ls $CLOVER_LIB/*.jar`; do
#echo $i
#done;
You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
HTH,
Dan
http://branchbird.com

ADT packaging with native extensions : permission denied error when running remote build.

Hi Team,
We are facing the following error when running the nightly ant build script on Mac machine for our air mobile application. We are using iOS native extensions and package with ADT. This works fine when we run the build as local user in the Mac machine. Earlier we faced some issues due to headless build and we have added the <headless-server>true</headless-server> in corresponding config files (flex-config.xml, airmobile-config.xml). After that we are facing the following error, even when we run the ant build in headless mode using the following command.
ant -Djava.awt.headless=true -f build.xml buildPackage
When running this build as local user in the Mac build machine, we see a window opening with com.adobe.air.ADT while packaging. This is the issue when running nightly build as there is no graphics window.
Can anybody please help how to get rid of this issue for nightly build using adt,jar?
Here is the error from build log:
buildiOSPackageWithNativeExtensionMac:
     [echo] Export the iOS package with Native extension for ApprovalsMobile in Mac
     [java] Exception in thread "main" java.lang.InternalError: Can't connect to window server - not enough permissions.
     [java] at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     [java] at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1827)
     [java] at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1724)
     [java] at java.lang.Runtime.loadLibrary0(Runtime.java:823)
     [java] at java.lang.System.loadLibrary(System.java:1045)
     [java] at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
     [java] at java.security.AccessController.doPrivileged(Native Method)
     [java] at java.awt.Toolkit.loadLibraries(Toolkit.java:1605)
     [java] at java.awt.Toolkit.<clinit>(Toolkit.java:1627)
     [java] at java.awt.Dimension.<clinit>(Dimension.java:70)
     [java] at com.adobe.air.validator.ApplicationDescriptorValidator.validateImageUri(ApplicationDescri ptorValidator.java:183)
     [java] at com.adobe.air.validator.ApplicationDescriptorValidator20.validateElement(ApplicationDescr iptorValidator20.java:121)
     [java] at com.adobe.air.validator.ApplicationDescriptorValidator25.validateElement(ApplicationDescr iptorValidator25.java:65)
     [java] at com.adobe.air.validator.ApplicationDescriptorValidator26.validateElement(ApplicationDescr iptorValidator26.java:62)
     [java] at com.adobe.air.validator.ApplicationDescriptorValidator30.validateElement(ApplicationDescr iptorValidator30.java:52)
     [java] at com.adobe.air.validator.ApplicationDescriptorValidator31.validateElement(ApplicationDescr iptorValidator31.java:46)
     [java] at com.adobe.air.validator.DescriptorValidator.endElement(DescriptorValidator.java:239)
     [java] at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.endElement(AbstractSAXParser .java:601)
     [java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(XML DocumentFragmentScannerImpl.java:1782)
     [java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDri ver.next(XMLDocumentFragmentScannerImpl.java:2939)
     [java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImp l.java:648)
     [java] at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(XMLNSDocumentScanne rImpl.java:140)
     [java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDo cumentFragmentScannerImpl.java:511)
     [java] at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.ja va:808)
     [java] at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.ja va:737)
     [java] at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:119)
     [java] at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java :1205)
     [java] at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.j ava:522)
     [java] at javax.xml.parsers.SAXParser.parse(SAXParser.java:395)
     [java] at javax.xml.parsers.SAXParser.parse(SAXParser.java:198)
     [java] at com.adobe.air.Descriptor.validateXML(Descriptor.java:182)
     [java] at com.adobe.air.Descriptor.<init>(Descriptor.java:56)
     [java] at com.adobe.air.ApplicationDescriptor.<init>(ApplicationDescriptor.java:84)
     [java] at com.adobe.air.ApplicationPackager.validateApplicationDescriptor(ApplicationPackager.java: 101)
     [java] at com.adobe.air.ApplicationPackager.createPackage(ApplicationPackager.java:64)
     [java] at com.adobe.air.ipa.IPAPackager.createPackage(IPAPackager.java:217)
     [java] at com.adobe.air.ADT.parseArgsAndGo(ADT.java:557)
     [java] at com.adobe.air.ADT.run(ADT.java:414)
     [java] at com.adobe.air.ADT.main(ADT.java:464)
Thanks,
Swathi.

Note: Before the above error that were two other errors .
1) The build complained that the adt-bundle-linux toolchain could not be found and required that it be added to .mozconfig. This was done.
2) The build complained that dx could not be found.
The configure file was edited and the values $DX, $AAPT and $AIDL were all set to the adt-bundle-linux/sdk/build-tools/android-4.4 path.
The instructions given on the Mozilla Wiki did not work right for Android and several modifications were made to move it along. But this permission error is tough to figure out.

SAML v2 plugin: Error when running saml2setup

I try to install the SAML v2 plugin and get the following error when running the saml2setup command:
C:\SSO\samlv2-2007Q2-windows>saml2setup install -s saml2silent
Java home path = C:\PROGRA~1\Java\JDK15~1.0_1
Configuring SAML2 plugin ...
java.lang.Exception: errorCopyFiles
        at com.sun.identity.saml2.install.SAML2Util.copyFile(SAML2Util.java:195)
        at com.sun.identity.saml2.install.SAML2Util.backupFiles(SAML2Util.java:5
17)
        at com.sun.identity.saml2.install.SAML2Util.configureSAML2(SAML2Util.jav
a:342)
        at com.sun.identity.saml2.install.SAML2Setup.configure(SAML2Setup.java:2
06)
        at com.sun.identity.saml2.install.SAML2Setup.execute(SAML2Setup.java:123
        at com.sun.identity.saml2.install.SAML2Setup.main(SAML2Setup.java:71)I have installed the Java ES 5 Identity suite with default configuration on Windows 2003. The content of the amserver.war lies extracted in the staging directory. The saml2silent properties file looks like this:
STAGING_DIR=C:/SSO/fm/war_staging
ADMINPASSWD=XXXX
DEPLOY_SAMPLES=true
SYSTEM=
AM_INSTANCE=
AM_CONFIGURATION_DIR=C:/PROGRA~1/Sun/JavaES5/identity/config
AMADMIN_DIR=C:/PROGRA~1/Sun/JavaES5/identity/bin
LOAD_SCHEMA=true
DS_DIRMGRDN="cn=Directory Manager"
DS_DIRMGRPASSWD=XXXXDoes anybody have an idea what's wrong?

Unfortunately not. I figured out that the problem was caused by some missing libraries. The amserver.war of the package installation is not identical to the amserver.war archive of the the single war deployment, since the package deployment uses a shared folder for some of the libraries. After copying the libraries into the staging folder I ran into other issues. Therefore I decided to install Access Manager using the single war depolyment. I could then install the SAML v2 plugin without any problems.

Error when running redis-benchmark

I'm receiving a consistently reproducible error when running redis-benchmark against a new B1 instance of Redis cache. Ran redis-benchmark both from local machine, and an Azure VM.
Create B1 instance of Redis cache (2.8)
Download redis-benchmark.exe from https://github.com/MSOpenTech/redis/releases/download/win-2.8.19/redis-2.8.19.zip
Run redis-benchmark.exe -h <instance>redis.cache.windows.net -t lpush,lrange_100,lrange_300,lrange_500,lrange_600
I receive the error:
Error: Server closed the connection

Hi,
Would you be able to turn the Non-SSL port ON and run it again?
Regards,
Malar.

Error when creating temporary directory on Windows OS

Hi,
I meet the following error when running my Java code on a Windows platform. Basically, I'm trying to create a temporary directory. The error occurs once in a while and only on Windows platform, no such problem on Unix systems.
Stack Trace:
java.io.IOException: Acc�s refus�
     at java.io.WinNTFileSystem.createFileExclusively(Native Method)
     at java.io.File.checkAndCreate(Unknown Source)
     at java.io.File.createTempFile(Unknown Source)
     at xxx.wutil.WFile.createTempDirectory(WFile.java:378)
     at xxx.query.editing.transformers.EditionTransformer.createDirectoryWorking(EditionTransformer.java:355)
     at xxx.query.editing.transformers.EditionTransformer.createDirectories(EditionTransformer.java:367)
     at xxx.query.editing.transformers.EditionTransformer.createTransformer(EditionTransformer.java:64)
     at xxx.query.editing.server.BatchEditingExec.runOutput(BatchEditingExec.java:137)
     at xxx.query.editing.server.BatchEditingExec.runX(BatchEditingExec.java:593)
     at xxx.query.editing.server.BatchEditingExec.internalRun(BatchEditingExec.java:403)
     at xxx.query.editing.server.BatchEditingExec.run(BatchEditingExec.java:260)
     at java.lang.Thread.run(Unknown Source)
     at xxx.wutil.WThread.runThread(WThread.java:72)
     at xxx.wutil.WThread.run(WThread.java:61)
The method createTempDirectory() from class WFile is given below:
public static synchronized File createTempDirectory(String prefix, String suffix, File directory) throws IOException {
File f = File.createTempFile(prefix, suffix, directory); // <-- line 378
f.delete();
f.mkdir();
return f;
The parameters passed to createTempDirectory() are: "LYT", null and a File denoting a work directory.
Do you know of such a problem with JVM on Windows platform ?
Thanks
Message was edited by:
fritaly

The stack trace says that Java called a native method to create the file and got back a return of "access refused" from the native.
Chec the os permissions.

Error when running a game in Windows

Similar Messages

Maybe you are looking for