Error when running adcfgclone.pl on dbTier

Hi Guru's,
Am currently performing a cloning on EBS 11.5.10.2 running on RHEL AS 3.0 (Taroon Update 6).
I followed all the correct procedures on the source system,including running of adpreclone on both tiers and running autoconfig,and every step completed sucessfully.I then copied all the 5 folders to the target system.
I ensured all the pre-requisite checks are completed including applying Patch 3006854 on the target,after which i run adcfgclone.pl on dbTier.......
It went upto about 50% then errored out as follows.
Kindly assist me.Below is a portion of the log file that contains that errors.
instantiate file:
source : /home/oracle/selfdb/9.2.0/appsutil/template/inventory/Patches21/oracle.xml.classgen.java/9.2.0.6.0/context.xml
dest : /home/oracle/selfdb/9.2.0/inventory/Patches21/oracle.xml.classgen.java/9.2.0.6.0/context.xml
backup : /home/oracle/selfdb/9.2.0/inventory/Patches21/oracle.xml.classgen.java/9.2.0.6.0/context.xml to /home/oracle/selfdb/9.2.0/appsutil/out/self_self/context901.xml
setting ownership: root:root
instantiate file:
source : /home/oracle/selfdb/9.2.0/appsutil/template/inventory/Templates/rdbms/demo/aqxml.conf
dest : /home/oracle/selfdb/9.2.0/inventory/Templates/rdbms/demo/aqxml.conf
backup : /home/oracle/selfdb/9.2.0/inventory/Templates/rdbms/demo/aqxml.conf to /home/oracle/selfdb/9.2.0/appsutil/out/self_self/aqxml3.conf
setting ownership: root:root
instantiate file:
source : /home/oracle/selfdb/9.2.0/appsutil/template/bin/odisrvreg
dest : /home/oracle/selfdb/9.2.0/bin/odisrvreg
AC-50401: Command: su root -c "cp /home/oracle/selfdb/9.2.0/bin/odisrvreg /home/oracle/selfdb/9.20.0/appsutil/out/self_self/odisrvreg" failed
Raised by oracle.apps.ad.autoconfig.InstantiateFile
backup : /home/oracle/selfdb/9.2.0/bin/odisrvreg to /home/oracle/selfdb/9.20.0/appsutil/out/self_self/odisrvreg
setting ownership: root:root
instantiate file:
source : /home/oracle/selfdb/9.2.0/appsutil/template/bin/schemasync
dest : /home/oracle/selfdb/9.2.0/bin/schemasync
AC-50401: Command: su root -c "cp /home/oracle/selfdb/9.2.0/bin/schemasync /home/oracle/selfdb/9.20.0/appsutil/out/self_self/schemasync" failed
Raised by oracle.apps.ad.autoconfig.InstantiateFile
backup : /home/oracle/selfdb/9.2.0/bin/schemasync to /home/oracle/selfdb/9.20.0/appsutil/out/self_self/schemasync
setting ownership: root:root
instantiate file:
source : /home/oracle/selfdb/9.2.0/appsutil/template/bin/emwebsite
dest : /home/oracle/selfdb/9.2.0/bin/emwebsite
AC-50401: Command: su root -c "cp /home/oracle/selfdb/9.2.0/bin/emwebsite /home/oracle/selfdb/9.20.0/appsutil/out/self_self/emwebsite" failed
Raised by oracle.apps.ad.autoconfig.InstantiateFile
backup : /home/oracle/selfdb/9.2.0/bin/emwebsite to /home/oracle/selfdb/9.20.0/appsutil/out/self_self/emwebsite
setting ownership: root:root

The last few lines of the log are as follows:-
ApplyDBTechStack Completed Successfully.
# Calling ApplyDatabase...
Executing runInstallDriver...
Started unzipping files...
UNZIP used: UnZip 5.50 of 17 February 2002, by Info-ZIP. Maintained by C. Spieler. Send
Verifying correctness of adcrdbclone.sql
Instantiating /home/oracle/selfdb/9.2.0/appsutil/template/adcrdbclone.sql to /home/oracle/selfdb/9.2.0/appsutil/install/self_self/adcrdbclone.sql
Clustered Database: false
instantiate file:
source : /home/oracle/selfdb/9.2.0/appsutil/template/adcrdbclone.sql
dest : /home/oracle/selfdb/9.2.0/appsutil/install/self_self/adcrdbclone.sql.bak
AC-00439: Creation of file /home/oracle/selfdb/9.2.0/appsutil/install/self_self/adcrdbclone.sql.bak failed
Raised by oracle.apps.ad.autoconfig.InstantiateFile
instantiate file:
source : /home/oracle/selfdb/9.2.0/appsutil/install/self_self/adcrdbclone.sql.bak
dest : /home/oracle/selfdb/9.2.0/appsutil/install/self_self/adcrdbclone.sql
AC-00444: Unable to write to file: java.io.FileNotFoundException: /home/oracle/selfdb/9.2.0/appsutil/install/self_self/adcrdbclone.sql.bak (No such file or directory)
Raised by oracle.apps.ad.autoconfig.InstantiateFile
setting permissions: /tmp/adcrdbclone.sql a+r
AC-00425: Setting permissions failed for file: /tmp/adcrdbclone.sql
Raised by oracle.apps.ad.autoconfig.InstantiateFile
AC-50401: Command: su root -c "cp /tmp/adcrdbclone.sql /home/oracle/selfdb/9.2.0/appsutil/install/self_self/adcrdbclone.sql" failed
Raised by oracle.apps.ad.autoconfig.InstantiateFile
StackTrace:
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
     at java.lang.String.substring(String.java:1591)
     at oracle.apps.ad.util.SystemCheck.setPermissions(SystemCheck.java:1247)
     at oracle.apps.ad.clone.ApplyDatabase.runInstallDriver(ApplyDatabase.java:810)
     at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:406)
     at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:319)
     at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:295)
     at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:154)
     at java.lang.reflect.Constructor.newInstance(Native Method)
     at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
     at java.lang.Thread.run(Thread.java:479)

Similar Messages

  • When run adcfgclone.pl gives error

    Hi,
    when run adcfgclone.pl appTier it gives error pleas have a look steps i did and Errors file below.
    Target System Database SID : dev
    Target System Database Server Node [erpdev] : devdata.npfco.com
    Target System Base Directory : /oracle/PROD
    Target System Tools ORACLE_HOME Directory [oracle/PROD/apps/tech_st/10.1.2] :
    Target System Web ORACLE_HOME Directory [oracle/PROD/apps/tech_st/10.1.3] :
    Target System APPL_TOP Directory [oracle/PROD/apps/apps_st/appl] :
    Target System COMMON_TOP Directory [oracle/PROD/apps/apps_st/comn] :
    Target System Instance Home Directory [oracle/PROD/inst] :
    Target System Root Service [enabled] :
    Target System Web Entry Point Services [enabled] :
    Target System Web Application Services [enabled] :
    Target System Batch Processing Services [enabled] :
    Target System Other Services [disabled] :
    Do you want to preserve the Display [erpappl:0.0] (y/n) ? : n
    Target System Display [erpdev:0.0] :
    RC-00217: Warning: Configuration home directory (s_config_home) evaluates to /oracle/PROD/inst/apps/dev_erpdev. A directory with this name already exists and is not empty.
    Do you want to continue (y/n) ? : y
    Do you want the the target system to have the same port values as the source system (y/n) [y] ? : n
    Target System Port Pool [0-99] : 3
    Checking the port pool 3
    done: Port Pool 3 is free
    Report file located at /oracle/PROD/inst/apps/dev_erpdev/temp/portpool.lst
    Complete port information available at /oracle/PROD/inst/apps/dev_erpdev/temp/portpool.lst
    RC-40201: Unable to connect to Database dev.
    Backing up /oracle/PROD/inst/apps/dev_erpdev/appl/admin/dev_erpdev.xml to /oracle/PROD/inst/apps/dev_erpdev/appl/admin/dev_erpdev.xml.bak
    Creating the new APPL_TOP Context file from :
    /oracle/PROD/apps/apps_st/appl/ad/12.0.0/admin/template/adxmlctx.tmp
    The new APPL_TOP context file has been created :
    /oracle/PROD/inst/apps/dev_erpdev/appl/admin/dev_erpdev.xml
    Log file located at /oracle/PROD/apps/apps_st/comn/clone/bin/CloneContext_1116232223.log
    Check Clone Context logfile /oracle/PROD/apps/apps_st/comn/clone/bin/CloneContext_1116232223.log for details.
    /oracle/PROD/apps/apps_st/comn/clone/bin/adchkutl.sh: line 80: [: 5.2: integer expression expected
    Running Rapid Clone with command:
    perl /oracle/PROD/apps/apps_st/comn/clone/bin/adclone.pl java=/oracle/PROD/apps/apps_st/comn/clone/bin/../jre mode=apply stage=/oracle/PROD/apps/apps_st/comn/clone component=appsTier method=CUSTOM appctxtg=/oracle/PROD/inst/apps/dev_erpdev/appl/admin/dev_erpdev.xml showProgress contextValidated=true
    Running:
    perl /oracle/PROD/apps/apps_st/comn/clone/bin/adclone.pl java=/oracle/PROD/apps/apps_st/comn/clone/bin/../jre mode=apply stage=/oracle/PROD/apps/apps_st/comn/clone component=appsTier method=CUSTOM appctxtg=/oracle/PROD/inst/apps/dev_erpdev/appl/admin/dev_erpdev.xml showProgress contextValidated=true
    APPS Password :
    Beginning application tier Apply - Mon Nov 16 23:23:21 2009
    /oracle/PROD/apps/apps_st/comn/clone/bin/../jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true -Doracle.installer.oui_loc=/oui -classpath /oracle/PROD/apps/apps_st/comn/clone/jlib/xmlparserv2.jar:/oracle/PROD/apps/apps_st/comn/clone/jlib/ojdbc14.jar:/oracle/PROD/apps/apps_st/comn/clone/jlib/java:/oracle/PROD/apps/apps_st/comn/clone/jlib/oui/OraInstaller.jar:/oracle/PROD/apps/apps_st/comn/clone/jlib/oui/ewt3.jar:/oracle/PROD/apps/apps_st/comn/clone/jlib/oui/share.jar:/oracle/PROD/apps/apps_st/comn/clone/jlib/oui/srvm.jar:/oracle/PROD/apps/apps_st/comn/clone/jlib/ojmisc.jar oracle.apps.ad.clone.ApplyAppsTier -e /oracle/PROD/inst/apps/dev_erpdev/appl/admin/dev_erpdev.xml -stage /oracle/PROD/apps/apps_st/comn/clone -showProgress
    APPS Password : Log file located at /oracle/PROD/inst/apps/dev_erpdev/admin/log/ApplyAppsTier_11162323.log
    / 90% completed
    RC-50004: Fatal: Error occurred in ApplyAppsTier:
    StackTrace -
    java.lang.reflect.InvocationTargetException
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
    at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
    at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:67)
    at java.lang.Thread.run(Thread.java:595)
    Caused by: java.lang.NoSuchMethodError: oracle.apps.ad.autoconfig.InstantiateFile.writeReport(Ljava/util/Vector;Loracle/apps/ad/util/LogFile;I)V

    [applmgr@erpdev bin]$ perl adcfgclone.pl appsTier
    Copyright (c) 2002 Oracle Corporation
    Redwood Shores, California, USA
    Oracle Applications Rapid Clone
    Version 12.0.0
    adcfgclone Version 120.20.12000000.12
    Enter the APPS password :
    /oracle/PROD/apps/apps_st/comn/clone/bin/adchkutl.sh: line 80: [: 5.2: integer expression expected
    Running:
    /oracle/PROD/apps/apps_st/comn/clone/bin/../jre/bin/java -Xmx600M -cp /oracle/PROD/apps/apps_st/comn/clone/jlib/java:/oracle/PROD/apps/apps_st/comn/clone/jlib/xmlparserv2.jar:/oracle/PROD/apps/apps_st/comn/clone/jlib/ojdbc14.jar oracle.apps.ad.context.CloneContext -e /oracle/PROD/apps/apps_st/comn/clone/bin/../context/apps/CTXORIG.xml -validate -pairsfile /tmp/adpairsfile_18493.lst -stage /oracle/PROD/apps/apps_st/comn/clone 2> /tmp/adcfgclone_18493.err; echo $? > /tmp/adcfgclone_18493.res
    Log file located at /oracle/PROD/apps/apps_st/comn/clone/bin/CloneContext_1117063328.log
    Provide the values required for creation of the new APPL_TOP Context file.
    Target System Hostname (virtual or normal) [erpdev] :
    Target System Database SID : dev
    Target System Database Server Node [erpdev] : devdata
    Target System Base Directory : /oracle/PROD
    Target System Tools ORACLE_HOME Directory [oracle/PROD/apps/tech_st/10.1.2] :
    Target System Web ORACLE_HOME Directory [oracle/PROD/apps/tech_st/10.1.3] :
    Target System APPL_TOP Directory [oracle/PROD/apps/apps_st/appl] :
    Target System COMMON_TOP Directory [oracle/PROD/apps/apps_st/comn] :
    Target System Instance Home Directory [oracle/PROD/inst] :
    Target System Root Service [enabled] :
    Target System Web Entry Point Services [enabled] :
    Target System Web Application Services [enabled] :
    Target System Batch Processing Services [enabled] :
    Target System Other Services [disabled] :
    Do you want to preserve the Display [erpappl:0.0] (y/n) ? : n
    Target System Display [erpdev:0.0] :
    RC-00217: Warning: Configuration home directory (s_config_home) evaluates to /oracle/PROD/inst/apps/dev_erpdev. A directory with this name already exists and is not empty.
    Do you want to continue (y/n) ? : y
    Do you want the the target system to have the same port values as the source system (y/n) [y] ? : n
    Target System Port Pool [0-99] : 51
    Checking the port pool 51
    done: Port Pool 51 is free
    Report file located at /oracle/PROD/inst/apps/dev_erpdev/temp/portpool.lst
    Complete port information available at /oracle/PROD/inst/apps/dev_erpdev/temp/portpool.lst
    RC-40201: Unable to connect to Database dev.
    Backing up /oracle/PROD/inst/apps/dev_erpdev/appl/admin/dev_erpdev.xml to /oracle/PROD/inst/apps/dev_erpdev/appl/admin/dev_erpdev.xml4.bak
    Creating the new APPL_TOP Context file from :
    /oracle/PROD/apps/apps_st/appl/ad/12.0.0/admin/template/adxmlctx.tmp
    The new APPL_TOP context file has been created :
    /oracle/PROD/inst/apps/dev_erpdev/appl/admin/dev_erpdev.xml
    Log file located at /oracle/PROD/apps/apps_st/comn/clone/bin/CloneContext_1117063328.log
    Check Clone Context logfile /oracle/PROD/apps/apps_st/comn/clone/bin/CloneContext_1117063328.log for details.
    /oracle/PROD/apps/apps_st/comn/clone/bin/adchkutl.sh: line 80: [: 5.2: integer expression expected
    Running Rapid Clone with command:
    perl /oracle/PROD/apps/apps_st/comn/clone/bin/adclone.pl java=/oracle/PROD/apps/apps_st/comn/clone/bin/../jre mode=apply stage=/oracle/PROD/apps/apps_st/comn/clone component=appsTier method=CUSTOM appctxtg=/oracle/PROD/inst/apps/dev_erpdev/appl/admin/dev_erpdev.xml showProgress contextValidated=true
    Running:
    perl /oracle/PROD/apps/apps_st/comn/clone/bin/adclone.pl java=/oracle/PROD/apps/apps_st/comn/clone/bin/../jre mode=apply stage=/oracle/PROD/apps/apps_st/comn/clone component=appsTier method=CUSTOM appctxtg=/oracle/PROD/inst/apps/dev_erpdev/appl/admin/dev_erpdev.xml showProgress contextValidated=true
    APPS Password :
    Beginning application tier Apply - Tue Nov 17 06:34:12 2009
    /oracle/PROD/apps/apps_st/comn/clone/bin/../jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true -Doracle.installer.oui_loc=/oui -classpath /oracle/PROD/apps/apps_st/comn/clone/jlib/xmlparserv2.jar:/oracle/PROD/apps/apps_st/comn/clone/jlib/ojdbc14.jar:/oracle/PROD/apps/apps_st/comn/clone/jlib/java:/oracle/PROD/apps/apps_st/comn/clone/jlib/oui/OraInstaller.jar:/oracle/PROD/apps/apps_st/comn/clone/jlib/oui/ewt3.jar:/oracle/PROD/apps/apps_st/comn/clone/jlib/oui/share.jar:/oracle/PROD/apps/apps_st/comn/clone/jlib/oui/srvm.jar:/oracle/PROD/apps/apps_st/comn/clone/jlib/ojmisc.jar oracle.apps.ad.clone.ApplyAppsTier -e /oracle/PROD/inst/apps/dev_erpdev/appl/admin/dev_erpdev.xml -stage /oracle/PROD/apps/apps_st/comn/clone -showProgress
    APPS Password : Log file located at /oracle/PROD/inst/apps/dev_erpdev/admin/log/ApplyAppsTier_11170634.log
    \ 89% completed
    RC-50004: Fatal: Error occurred in ApplyAppsTier:
    StackTrace -
    java.lang.reflect.InvocationTargetException
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
    at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
    at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:67)
    at java.lang.Thread.run(Thread.java:595)
    Caused by: java.lang.NoSuchMethodError: oracle.apps.ad.autoconfig.InstantiateFile.writeReport(Ljava/util/Vector;Loracle/apps/ad/util/LogFile;I)V
    at oracle.apps.ad.clone.ApplyApplTop.checkAutoConfigErr(ApplyApplTop.java:590)
    at oracle.apps.ad.clone.ApplyApplTop.runAutoConfig(ApplyApplTop.java:558)
    at oracle.apps.ad.clone.ApplyApplTop.doConf(ApplyApplTop.java:339)
    at oracle.apps.ad.clone.ApplyApplTop.doApply(ApplyApplTop.java:382)
    at oracle.apps.ad.clone.ApplyApplTop.<init>(ApplyApplTop.java:267)
    at oracle.apps.ad.clone.ApplyAppsTier.<init>(ApplyAppsTier.java:105)
    ... 6 more

  • ORA-01503 and ORA-01110 Errors while running adcfgclone.pl dbTier

    Hi,
    I am working on R12 on IBM AIX as I am cloning from one system to another I am facing some errors while running adcfgclone.pl for database tier.
    Following is the log from the adcfgclone.pl as it fails;
    Creating the control file for CLONE_test database ...
    SQL*Plus: Release 11.1.0.7.0 - Production on Mon Sep 6 10:32:43 2010
    Copyright (c) 1982, 2008, Oracle.  All rights reserved.
    Connected to an idle instance.
    ORACLE instance shut down.
    Connected to an idle instance.
    ORA-32006: USER_DUMP_DEST initialization parameter has been deprecated
    ORA-32006: BACKGROUND_DUMP_DEST initialization parameter has been deprecated
    ORACLE instance started.
    Total System Global Area 1068937216 bytes
    Fixed Size                  2160600 bytes
    Variable Size             427821096 bytes
    Database Buffers          624951296 bytes
    Redo Buffers               14004224 bytes
    CREATE CONTROLFILE REUSE SET DATABASE "CLONE"
    *+
    ERROR at line 1:
    ORA-01503: CREATE CONTROLFILE failed
    ORA-01159: file is not from same database as previous files - wrong database id
    ORA-01110: data file 22: '/u04/oracle/proddata/applsysx01.dbf'
    alter database open resetlogs
    *+
    ERROR at line 1:
    ORA-01507: database not mounted
    alter tablespace TEMP add tempfile '/u03/oracle/proddata/temp01.dbf' REUSE
    *+
    ERROR at line 1:
    ORA-01109: database not open
    ALTER DATABASE RENAME GLOBAL_NAME TO "CLONE.testcom.com"
    *+
    ERROR at line 1:
    ORA-01109: database not open
    ORA-01507: database not mounted
    ORACLE instance shut down.
    Connected to an idle instance.
    ORA-32006: USER_DUMP_DEST initialization parameter has been deprecated
    ORA-32006: BACKGROUND_DUMP_DEST initialization parameter has been deprecated
    ORACLE instance started.
    Total System Global Area 1068937216 bytes
    Fixed Size                  2160600 bytes
    Variable Size             427821096 bytes
    Database Buffers          624951296 bytes
    Redo Buffers               14004224 bytes
    ORA-03113: end-of-file on communication channel
    Process ID: 1278120
    Session ID: 1105 Serial number: 3
    ERROR:
    ORA-03114: not connected to ORACLE
    ORA-24324: service handle not initialized
    ORA-01041: internal error. hostdef extension doesn't exist
    Connected.
    ORA-01031: insufficient privileges
    ERROR:
    ORA-01012: not logged on
    ERROR:
    ORA-01012: not logged on
    ERROR:
    ORA-01012: not logged on
    ERROR:
    ORA-01012: not logged on
    ERROR:
    ORA-01012: not logged on
    ERROR:
    ORA-01012: not logged on
    Disconnected
    exit_code=1
    Checking for errors ...
    The database has not been successfully created. Shutting down the instance ...
    SQL*Plus: Release 11.1.0.7.0 - Production on Mon Sep 6 10:33:12 2010
    Copyright (c) 1982, 2008, Oracle.  All rights reserved.
    Connected to an idle instance.
    ORACLE instance shut down.
    Disconnected
    +.end std out.+
    +.end err out.+
    I have checked the log for preclone from the source machine but there are no errors. Below are the last lines of preclone log file
    Zip2 - Completed native zipping sh -c "cd /u02/oracle/proddb/10.2.0/appsutil/out/PROD_testcom/; zip  -q  -y /u02/oracle/proddb/10.2.0/appsutil/clone/data/stage/adcrdb.zip -@ ; echo ERRORCODE = $? ERRORCODE_END"
    Done...
    +#############################################################+
    StageDBTier Finished at Tue Aug 31 16:50:19 GMT03:00 2010+
    Status: Completed Successfully
    +#############################################################+
    Please advice.
    Regards

    Hi user:
    1. Yes the database and lsnr were closed as the tar files were created. So, i assume thate there are no any oracle session avalibale when you copy files from source to target
    2. Yes I would also like to mention that it already had an old instance. So this is just a new clone. So, i mention you have valid entery on /etc/hosts file
    3. Please can you describe what permissions as from root user it was done as
    chown -R oratest:dba <db tier folders> If your target user is oratest than syntax seems correct, did you copy oracle_home too from source to target and this home owner is oratest again right?
    Regard
    Helios

  • Error while running  perl adpreclone.pl dbTier

    Hi all,
    Error while running perl adpreclone.pl dbTier
    Running Rapid Clone with command...
    perl /u02/app/orap/product/9.2.0/appsutil/bin/adclone.pl java=/u02/app/orap/product/9.2.0/jre/1.4.2 mode=stage stage=/u02/app/orap/product/9.2.0/appsutil/clone component=dbTier method=CUSTOM dbctx=/u02/app/orap/product/9.2.0/appsutil/DEV_XXX.xml showProgress
    Beginning database tier Stage - Fri Jun 26 12:16:45 2009
    APPS Password : appsdev
    Log file located at /u02/app/orap/product/9.2.0/appsutil/log/DEV_jos11/StageDBTier_06261216.log
    / 75% completed
    RC-50409: Topology information required for cloning not found in the database. Make sure that AutoConfig was run successfully prior to starting Rapid Clone, and try again
    Raised by oracle.apps.ad.tools.AdCreateCtlFile
    RC-40001: Fatal: Failed to create sql script adcrdbclone.sql for recreating control files at target
    - 75% completed
    ERROR while running Stage...
    Checked metalink found the below solution but please the me interconnect_name is what ?
    Check if the column interconnect_name from the fnd_database_instances has a value. If not, please update it with the correct value:
    update FND_DATABASE_INSTANCES
    set INTERCONNECT_NAME = 'xxx';
    commit;
    Rerun the process.
    Thanks,
    Bhanu Chander.

    Hi,
    Alert log is normal.
    but adcfgclone.pl log is
    /u02/app/orap/product/9.2.0/appsutil/out/DEV_XXXX/dbfinfo.lst created Successfully.
    Generating /u02/app/orap/product/9.2.0/appsutil/out/DEV_XXXX/addbhomsrc.xml which will contain the unique mount points
    NODE_ID Column Availability: true
    Node Id Column is available. dbfinfo.lst will contain the node list
    Host Column Availability: true
    Exception occurred while querying the datamodel: java.lang.NullPointerException
    StackTrace:
    java.lang.NullPointerException
    at java.util.Hashtable.put(Hashtable.java:393)
    at oracle.apps.ad.tools.AdCreateCtlFile.get_rac_data(AdCreateCtlFile.java:1325)
    at oracle.apps.ad.tools.AdCreateCtlFile.gen_dbhomes_xml(AdCreateCtlFile.java:530)
    at oracle.apps.ad.tools.AdCreateCtlFile.gen_crctrfclone_sql(AdCreateCtlFile.java:626)
    at oracle.apps.ad.tools.AdCreateCtlFile.<init>(AdCreateCtlFile.java:428)
    at oracle.apps.ad.clone.StageDatabase.doStage(StageDatabase.java:457)
    at oracle.apps.ad.clone.StageDatabase.<init>(StageDatabase.java:266)
    at oracle.apps.ad.clone.StageDBTier.<init>(StageDBTier.java:216)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
    at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
    at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
    at java.lang.Thread.run(Thread.java:534)
    RC-50409: Topology information required for cloning not found in the database. Make sure that AutoConfig was run successfully prior to starting Rapid Clone, and try again
    Raised by oracle.apps.ad.tools.AdCreateCtlFile
    RC-50208: Exception in method gen_crctrfclone_sql
    RC-50208: Exception in Constructor AdCreateCtlFile
    Raised by oracle.apps.ad.tools.AdCreateCtlFile
    StackTrace:
    java.lang.Exception
    at oracle.apps.ad.tools.AdCreateCtlFile.get_rac_data(AdCreateCtlFile.java:1348)
    at oracle.apps.ad.tools.AdCreateCtlFile.gen_dbhomes_xml(AdCreateCtlFile.java:530)
    at oracle.apps.ad.tools.AdCreateCtlFile.gen_crctrfclone_sql(AdCreateCtlFile.java:626)
    at oracle.apps.ad.tools.AdCreateCtlFile.<init>(AdCreateCtlFile.java:428)
    at oracle.apps.ad.clone.StageDatabase.doStage(StageDatabase.java:457)
    at oracle.apps.ad.clone.StageDatabase.<init>(StageDatabase.java:266)
    at oracle.apps.ad.clone.StageDBTier.<init>(StageDBTier.java:216)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
    at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
    at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
    at java.lang.Thread.run(Thread.java:534)
    RC-40001: Failed to create sql script adcrdbclone.sql for recreating control files at target
    Raised by oracle.apps.ad.clone.StageDatabase
    Thanks,
    Bhanu Chander

  • Error when running a report in BPC NW

    I am getting the following error when running a report for my application in BPC NW.
    EVDRE encountered an error retrieving data from the Web Server (retrying in (X) seconds).
    This error comes with this dialog option box to either continue or cancel retrying retrieving data. Retrying doesn't help either.
    Any report I run (on any of my appsets), I get this error. I used the EVDRE function and also tried running a report using the template as the basis. But I get the error either way.
    Does anyone know why this error is occurs or how to debug this issue. I saw some information about this in earlier threads but could  not make much out of it.
    Appreciate any assistance.

    Sanjay,
      This  is a   very  generic  error...Couple  of  places  to  look  for....
    1)Reprocess the application (Modify application + Reassign SQL Index + Process Application)
    2)optimizing the application sometimes helps (Full Optimize + Compress Database + Index defragmentation).
    3)Create a "evdataserver_debug.txt" in user's private publication folder on  server side to populate very detail level logging  and  check  the  log on client side EVDRE_LOG.txt for  further  peek  into  where  things  are getting  messed up.
    if  evdataserver_debug.txt does not  get  populated on BPC 5.x...it  is  an  issue  with  IIS authetication on Application server.
    4)You have to check the event viewer into .NET server and also the BPC logs which can be found into
    BPC\Logging  for  further  details  ..
    Hope  this  helps..
    Edited by: Vishal Mahawadhi on Jun 24, 2009 9:50 AM

  • Getting the MDX query select error when running a webi report on BI query

    Getting the following error when running a webi report on BI query :
    A database error occured. The database error text is: The MDX query SELECT  { [Measures].[D8JBFK099LLUVNLO7JY49FJKU] }  ON COLUMNS , NON EMPTY [ZCOMPCODE].[LEVEL01].MEMBERS ON ROWS FROM [ZTEST_CUB/REP_20100723200521]  failed to execute with the error Unknown error. (WIS 10901).
    I have gone through many threads related to this error. But not able find the steps to follow for resoultion.
    Please help in this regard.
    Thanks,
    Jeethender

    The Fix Pack is also for Client Tools--it is a separate download.  Please see the text below for ADAPT01255422
    ADAPT01255422
    Description:
    Web Intelligence generates an incorrect MDX statement when a characteristic and a prompt are used.
    The following database error happens: "The MDX query ... failed to execute with the error
    Unknown error (WIS 10901)."
    New Behavior:
    This problem is resolved.
    This information is also available in the Fixed Issues document for any Fix Pack greater than 2.2.

  • Getting an Error When Running Server 2012 R2 adprep /forest prep on a 2012 DC

    I am getting an error when running adprep /forest prep on a Server 2012 domain controller. The main parts of my domain are as follows:
    2 - Domain Controllers running Server 2012
    1 - Exchange Server 2013 running on Server 2012
    I am trying to either do an in-place upgrade to my domain controllers to Server 2012 R2 or even introduce a Server 2012 R2 domain controller into the domain. The error I am getting is as follows:
    [Status/Consequence]
    The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
    [2014/04/05:09:12:38.873]
    Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
    [2014/04/05:09:12:38.873]
    LDAP API ldap_search_s() finished, return code is 0x20
    [2014/04/05:09:12:38.873]
    Adprep verified the state of operation cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
    [Status/Consequence]
    The operation has not run or is not currently running. It will be run next.
    [2014/04/05:09:12:38.873]
    Adprep was about to call the following LDAP API. ldap_modify_s(). The entry to modify is CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
    [2014/04/05:09:12:38.873]
    LDAP API ldap_modify_s() finished, return code is 0x13
    [2014/04/05:09:12:38.905]
    Adprep was unable to modify some attributes on object CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
    [User Action]
    Check the log file ADPrep.log in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
    [2014/04/05:09:12:38.936]
    Adprep encountered an LDAP error.
    Error code: 0x13. Server extended error code: 0x20b1, Server error message: 000020B1: AtrErr: DSID-030F112A, #1:
     0: 000020B1: DSID-030F112A, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 9086f (msDS-ClaimIsValueSpaceRestricted)
    DSID Info:
    DSID: 0x181112dd
    ldap error = 0x13
    NT BUILD: 9600
    NT BUILD: 16384
    [2014/04/05:09:12:38.967]
    Adprep was unable to update forest information.
    [Status/Consequence]
    Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
    [User Action]
    Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
    Any Help would be appreciated. Thanks!

    Hi,
    did you check which servers has FSMO roles?
    You can do that via command prompt: netdom query fsmo
    For forestprep you must do that on DC which have Schema Operations marter role.
    Command
    Domain controller
    Number of times to run the command
    adprep /forestprep
    Must be run on the schema operations master for the forest.
    Once for the entire forest
    adprep /domainprep
    Must be run on the infrastructure operations master for the domain.
    Once in each domain where you plan to install an additional domain controller that runs a later version of Windows Server than the latest version that is running in the domain.
    Note
    Domains where you will not add a new domain controller will be affected by adprep /forestprep, but they do not require you to run adprep /domainprep.
    http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx

  • Error while running adcfgclone on apps tier

    I am getting the following error while running adcfgclone on the apps tier...
    OS: RHEL 5.5 64bit
    Oracle 10.2.0.3
    EBS R12.0.4 Multinode
    DB Tier and APPS Tier on different nodes.
    RC-50004: Fatal: Error occurred in ApplyAppsTier:
    StackTrace -
    java.lang.reflect.InvocationTargetException
            at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
            at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
            at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
            at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
            at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:67)
            at java.lang.Thread.run(Thread.java:595)
    Caused by: java.lang.NoSuchMethodError: oracle.apps.ad.autoconfig.InstantiateFile.writeReport(Ljava/util/Vector;Loracle/apps/ad/util/LogFile;I)V
            at oracle.apps.ad.clone.ApplyApplTop.checkAutoConfigErr(ApplyApplTop.java:590)
            at oracle.apps.ad.clone.ApplyApplTop.runAutoConfig(ApplyApplTop.java:558)
            at oracle.apps.ad.clone.ApplyApplTop.doConf(ApplyApplTop.java:339)
            at oracle.apps.ad.clone.ApplyApplTop.doApply(ApplyApplTop.java:382)
            at oracle.apps.ad.clone.ApplyApplTop.<init>(ApplyApplTop.java:267)
            at oracle.apps.ad.clone.ApplyAppsTier.<init>(ApplyAppsTier.java:105)
            ... 6 moreon the checking the logfile I am getting the following error
    Executable : /do5_apphome/apps/tech_st/10.1.2/bin/sqlplus
    SQL*Plus: Release 10.1.0.5.0 - Production on Fri Mar 30 11:12:06 2012
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Enter value for 1: Enter value for 2: Enter value for 3: Enter value for 4: ERRO                                             R:
    ORA-12560: TNS:protocol adapter error
    igccmprf.sh exiting with status 1
    ERRORCODE = 1 ERRORCODE_END
    .end std out.
    .end err out.
    Product Top Drivers executed : AD_TOP  FND_TOP  ICX_TOP  IEO_TOP  BIS_TOP  AMS_T                                             OP  CCT_TOP  WSH_TOP  CLN_TOP  OKE_TOP  OKL_TOP  OKS_TOP  CSF_TOP  IGS_TOP  IBY_                                             TOP  JTF_TOP  MWA_TOP  CN_TOP  CSI_TOP  WIP_TOP  CSE_TOP  EAM_TOP  FTE_TOP  ONT_                                             TOP  AR_TOP  AHL_TOP  OZF_TOP  IES_TOP  CSD_TOP  IGC_TOPI have successfully run rapidclone on db tier without any errors..Kindly advice me what to do to get my apps up and running..Database is already up and running!

    Mr Hussein ,
    I guess it is an issue with autoconfig. So i tried to run auto config manually and got the following error which I would like you to have a look at
                       ADX Database Utility
    getConnection() -->
        sDbHost    : devdb
        sDbDomain  : erp.local
        sDbPort    : 1551
        sDbSid     : dev
        sDbUser    : APPS
        Trying to connect using SID...
    getConnectionUsingSID() -->
        JDBC URL: jdbc:oracle:thin:@devdb.erp.local:1551:dev
        Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
        Trying to connect using SID as ServiceName
    getConnectionUsingServiceName() -->
        JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=devdb.erp.local)(PORT=1551))(CONNECT_DATA=(SERVICE_NAME=dev)))
        Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
        Trying to connect using SID as ServiceName.DomainName
    getConnectionUsingServiceName() -->
        JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=devdb.erp.local)(PORT=1551))(CONNECT_DATA=(SERVICE_NAME=dev.erp.local)))
        Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
        Connection could not be obtained; returning null
    -------------------ADX Database Utility Finished---------------
            Verifying connection to the Database   : Could not be stablished
            No Restore Profile file created.
    Restore Profile utility ran successfully
    ===========================================================================
    Listener Port no 1521

  • Error while running adcfgclone on APPS tier (ERROR: context creation not completed successfully)

    I am getting below error while running adcfgclone on APPS tier
    ERROR : Unable to set CLASSPATH
    /corp_ex1/DRPM/drpmcomn/clone/bin/../jlib/classes111.zip: is  missing
    First Creating a new context file for the cloned system.
    The program is going to ask you for information about the new system:
    ERROR: context creation not completed successfully.
    Please check /tmp/adcfgclone_29475.err file for errors
    i  copied classes111.zip from IAS_HOME to COMMON_TOP . Now I am getting below error
    First Creating a new context file for the cloned system.
    The program is going to ask you for information about the new system:
    ERROR: context creation not completed successfully.
    Please check /tmp/adcfgclone_30763.err file for errors

    Please post the details of the application release, database version and OS.
    ERROR: context creation not completed successfully
    This is a generic error, please check the log files for details about the error.
    Thanks,
    Hussein

  • ORA-06502 - Error when running "Ask The Expert 0.9"

    Hi ,
    I successfully installed "Ask the Expert" package with Apex 3.0 on Oracle 10g Database 10.2.0.1.0. No error ocurred during the import in my Apex environment.
    Besides that, i'm having problems when i tried to run the "Aks the Expert". It always shows the following message errors:
    ORA-06502: PL/SQL: numeric or value error: character string buffer too small
    Error Unable to write activity log.
    I think it was a problem with APEX instalation, but i could run the Sample Application of Apex without any problem.
    I opened an SR in Metalink, but to my surprise, the analist of support don't know what's wrong with the demo "Ask de Expert".
    The debug function of the application show the following commands before the error ocurrs:
    0.01:
    0.01: S H O W: application="103" page="1" workspace="" request="" session="6648566035252817"
    0.01: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
    0.01: alter session set nls_language="AMERICAN"
    0.01: alter session set nls_territory="AMERICA"
    0.01: NLS: CSV charset=WE8MSWIN1252
    0.01: ...NLS: Set Decimal separator="."
    0.01: ...NLS: Set NLS Group separator=","
    0.02: ...NLS: Set date format="DD-MON-RR"
    0.02: ...Setting session time_zone to -03:00
    0.02: NLS: Language=en-us
    0.02: Application 103, Authentication: CUSTOM2, Page Template: 667896385843019243
    0.02: ...Determine if user "N3COUTINHO" workspace "951808960237899" can develop application "103" in workspace "951808960237899"
    0.02: ...ok to reuse builder session for user:nobody
    0.03: ...Application session: 6648566035252817, user=nobody
    0.03: ...Determine if user "N3COUTINHO" workspace "951808960237899" can develop application "103" in workspace "951808960237899"
    0.03: Session: Fetch session header information
    0.03: ...Metadata: Fetch page attributes for application 103, page 1
    0.03: Fetch session state from database
    0.03: Branch point: BEFORE_HEADER
    0.03: Fetch application meta data
    0.04: Computation point: BEFORE_HEADER
    0.04: ...Perform computation of item: P1_CLEAN_CRITERIA, type=FUNCTION_BODY
    0.04: ...Performing function body computation
    0.06: ...Session State: Save "P1_CLEAN_CRITERIA" - saving same value: ""
    0.06: Processing point: BEFORE_HEADER
    0.06: ...Process "Read and Write Activity Cookie": PLSQL (BEFORE_HEADER) declare l_cookie_id number; begin owa_util.mime_header('text/html', FALSE); -- ate_api.read_activity_cookie; l_cookie_id := ate_api.fetch_activity_cookie_val( 'COOKIE_ID' ); -- if l_cookie_id is null then l_cookie_id :=
    Content-type: text/html; charset=ISO-8859-1 Set-Cookie: activity_ask_expert=1|2400346189796; expires=Wed, 01-Jan-2020 08:00:00 GMT; path=/;
    0.06: Encountered unhandled exception in process type PLSQL
    0.06: Show ERROR page...
    0.06: Performing rollback...
    Please, could any one help me to solve this problem ? Metalink couldn't help me diagnosing what's wrong.
    Thanks,
    Sergio Coutinho

    Hi,
    I don´t know if it help the analisis, but i collect some informations about my environment:
    1) HTML DB version
    3.0.1
    2) Database version
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
    With the Partitioning, OLAP and Data Mining options
    3) Database server operating system (as well, if 32-bit or 64-bit)
    Solaris 5.9 - 64 bits
    4) Database Parameters:
    PARAMETER VALUE
    NLS_CALENDAR GREGORIAN
    NLS_CHARACTERSET WE8ISO8859P1
    NLS_COMP BINARY
    NLS_CURRENCY $
    NLS_DATE_FORMAT DD-MON-RR
    NLS_DATE_LANGUAGE AMERICAN
    NLS_DUAL_CURRENCY $
    NLS_ISO_CURRENCY AMERICA
    NLS_LANGUAGE AMERICAN
    NLS_LENGTH_SEMANTICS BYTE
    NLS_NCHAR_CHARACTERSET AL16UTF16
    NLS_NCHAR_CONV_EXCP FALSE
    NLS_NUMERIC_CHARACTERS .,
    NLS_RDBMS_VERSION 10.2.0.1.0
    NLS_SORT BINARY
    NLS_TERRITORY AMERICA
    NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
    NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
    NLS_TIME_FORMAT HH.MI.SSXFF AM
    NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
    Could it explain why ASK THE EXPERT is running on hosted apex site and it´s
    generating error when running in my environment?
    Thanks for the help !
    Sergio

  • Getting the below error when running the Baseline.grf for the first time

    I am getting the below error when running the Baseline.grf for the first time.
    Appreciate your support in resolving it.
    Error below:
    INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
    INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
    INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
    INFO [main] - Loading default properties from: defaultProperties
    INFO [main] - Graph definition file: graph/Baseline.grf
    INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
    INFO [main] - Checking graph configuration...
    INFO [main] - Graph configuration is valid.
    INFO [main] - Graph initialization (Baseline)
    INFO [main] - [Clover] Initializing phase: 0
    INFO [main] - [Clover] phase: 0 initialized successfully.
    INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
    INFO [WatchDog] - Starting up all nodes in phase [0]
    INFO [WatchDog] - Successfully started all nodes in phase!
    INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
    INFO [RUN_GRAPH1_0] - Checking graph configuration...
    INFO [RUN_GRAPH1_0] - Graph configuration is valid.
    INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
    INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
    WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
    java.lang.NullPointerException
         at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
         at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
         at org.jetel.graph.Phase.free(Phase.java:487)
         at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
         at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
         at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
         at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
         at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
         at org.jetel.component.RunGraph.execute(RunGraph.java:302)
         at org.jetel.graph.Node.run(Node.java:414)
         at java.lang.Thread.run(Thread.java:619)
    WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
    WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
    ERROR [WatchDog] - Graph execution finished with error
    ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
    ERROR [WatchDog] - Node RUN_GRAPH1 error details:
    org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
         at org.jetel.component.RunGraph.execute(RunGraph.java:324)
         at org.jetel.graph.Node.run(Node.java:414)
         at java.lang.Thread.run(Thread.java:619)
    INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
    INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
    INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
    ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
    INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
    INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
    INFO [WatchDog] - 0 ERROR 2 20132
    INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
    WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
    ./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
    INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
    INFO [main] - Freeing graph resources.
    ERROR [main] - Execution of graph failed !

    It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
    #echo $CLOVER_LIB/*
    for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
         LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
    done;
    #for i in `ls $CLOVER_LIB/*.jar`; do
    #echo $i
    #done;
    You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
    HTH,
    Dan
    http://branchbird.com

  • SQL serever 2012 Setup has encountered an error when running a windows installer file

    I am trying to install SQL server 2012 Express on a windows 7 PC for 2 days now. I feel like banging my head against the wall.
    I keep getting the following errors here's the full log
    The following error has occurred:
    SQL Server Setup has encountered an error when running a Windows Installer file.
    Windows Installer error message: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'. Please refer
    to Help and Support for more information. HRESULT: 0x8007054F. Windows Installer file: C:\Users\Receno\AppData\Local\Temp\SQL Server 2012\Setup\1033_ENU_LP\x64\setup\sqlsupport_msi\SqlSupport.msi Windows Installer log file: C:\Program Files\Microsoft SQL Server\110\Setup
    Bootstrap\Log\20150109_213740\SqlSupport_Cpu64_1_ComponentUpdate_1.log
    Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
    For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDC80C325

    hmmm..so which hotfix do I apply ?
    SQL Server 2012
    All (Global) x64
    2012_RTM_DAC_CU11_2908007_11_0_2424_x64
    SQL Server 2012
    All (Global) x64
    2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
    SQL Server 2012
    All (Global) x64
    SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
    SQL Server 2012
    All (Global) x64
    2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
    SQL Server 2012
    All (Global) x64
    2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
    SQL Server 2012
    All (Global) x86
    2012_RTM_DAC_CU11_2908007_11_0_2424_x86
    SQL Server 2012
    All (Global) x86
    2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
    SQL Server 2012
    All (Global) x86
    2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
    SQL Server 2012
    All (Global) x86
    SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
    SQL Server 2012
    All (Global)
    x64
    2012_RTM_DAC_CU11_2908007_11_0_2424_x64
    <input id="chk471373" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x64
    2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
    <input id="chk471368" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x64
    SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
    <input id="chk471370" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x64
    2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
    <input id="chk471371" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x64
    2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
    <input id="chk471374" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x86
    2012_RTM_DAC_CU11_2908007_11_0_2424_x86
    <input id="chk471372" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x86
    2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
    <input id="chk471369" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x86
    2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
    <input id="chk471367" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x86
    SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
    SQL Server 2012
    All (Global)
    x64
    2012_RTM_DAC_CU11_2908007_11_0_2424_x64
    <input id="chk471373" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x64
    2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
    <input id="chk471368" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x64
    SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
    <input id="chk471370" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x64
    2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
    <input id="chk471371" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x64
    2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
    <input id="chk471374" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x86
    2012_RTM_DAC_CU11_2908007_11_0_2424_x86
    <input id="chk471372" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x86
    2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
    <input id="chk471369" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x86
    2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
    <input id="chk471367" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x86
    SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
    SQL Server 2012
    All (Global)
    x64
    2012_RTM_DAC_CU11_2908007_11_0_2424_x64
    <input id="chk471373" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x64
    2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
    <input id="chk471368" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x64
    SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
    <input id="chk471370" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x64
    2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
    <input id="chk471371" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x64
    2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
    <input id="chk471374" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x86
    2012_RTM_DAC_CU11_2908007_11_0_2424_x86
    <input id="chk471372" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x86
    2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
    <input id="chk471369" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x86
    2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
    <input id="chk471367" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x86
    SQLServer2012_RTM_CU11_2908007_11_0_2424_x86

  • ORA-04062 error when running forms with different users

    ORA-04062 error when running forms with different users
    I have a form that has a block that should display some data from another users tables. (The other user's name is dynamic, it's selected from a list box)
    I wrote a stored procedure to get the data from other user's tables.
    When I compile the form and run it with the same user I compiled, it works without any error. But when I run the compiled form with another user I get the ORA-04062 (signature of procedure has been changed) error.
    I tried setting REMOTE_DEPENDENCIES_MODE to SIGNATURE in init.ora but it didn't help.
    My Forms version is 6i with Patch 15.
    Database version is 9.
    Here is my stored procedure:
    TYPE Scenario_Tab IS TABLE OF NUMBER(34) INDEX BY BINARY INTEGER;
    TYPE Open_Curs IS REF CURSOR;
    PROCEDURE Get_Scenarios(User_Name IN VARCHAR2, Scen_Table OUT Scenario_Tab) IS
    Curs Open_Curs;
    i NUMBER;
    BEGIN
    OPEN Curs FOR
    'SELECT Seq_No FROM '|| User_Name ||'.scenario';
    i := 1;
    LOOP
    FETCH Curs INTO Scen_Table(i);
    EXIT WHEN Curs%NOTFOUND;
    i := i + 1;
    END LOOP;
    END Get_Senarios;
    I would be happy to solve this problem. It's really important.
    Maybe somebody can tell me another way to do what I want to do. (getting a list of values from another users tables)

    I think it should be a better solution to create a package,
    and put your own TYPES and procedure into it.
    CREATE OR REPLACE PACKAGE PKG_XXX IS
    TYPE TYP_TAB_CHAR IS TABLE OF .... ;
    PROCEDURE P_XX ( Var1 IN VARCHAR2, var2 IN OUT TYP_TAB_CHAR );
    END ;
    Then in your Form :
    Declare
    var PKG_XXX.TYP_TAB_CHAR ;
    Begin
    PKG_XXX.P_XX( 'user_name', var ) ;
    End ;

  • Error when running allocation logic

    I am running the following allocation logic and get the following error:
    *RUNALLOCATION
    *FACTOR=USING/TOTAL
    *DIM P_ACCT WHAT=CE0004010; WHERE=CE0004020; USING=CE0004030; TOTAL=<<<
    *DIM ENTITY WHAT=A1000; WHERE=<<<; USING=<<<; TOTAL=<<<
    *DIM TIME WHAT=2009.JAN; WHERE=>>>; USING=BAS(2009.TOTAL); TOTAL=<<<
    *ENDALLOCATION
    UJP_RULE_EXCEPTION:Missing [] on property name: WHAT=CE0004010. I get this error when executing the script using the program "UJK_SCRIPT_LOGIC_TESTER". I also get a similar error when running it via the data manager package.
    Any thoughts on why this error is happening?

    Hi Sanjay,
    I think you are using formula property for any of the dimension member used in the Allocation logic.
    FYI Allocation will not work fine for the dimension members which is calculated using the formula written in the formula Property.
    There is no problem with your script it looks fine.
    Hope this might help you.
    Regards,
    G.Vijaya Kumar

  • How to solve error when run Depreciation (T-Code:AFAB)

    Dear All Experts,
    Hi,
    I found error when run Depreciation for period 9 FYI. I had run Planed posting period Depreciation (TCode: AFAB).  with fiscal year: 2010, posting period: 9, reason for posting run: Planed posting run. Select on Test Run. Then i found error message as below.
    Documents manually posted within dep.doc.number range
         Message no. AA728
    Diagnosis
         In the number range interval for the document type for posting
         depreciation, a document  has been posted which was not created within
         the framework of depreciation posting. The last document posted by
         depreciation posting was assigned the number .
    Procedure
         Contact your Systems Specialist. When changing the number range interval
         for the document type in depreciation posting, you have to specify a new
         interval in which no documents exist. Using organizational measures, you
         can guarantee that there are no documents apart from those created by
         depreciation posting in this number range.
    Would you help me how to solve this error?
    Thank you in advance
    Best Regards
    Utarat.P

    Hi Utarat,
    first question is: have you really manually posted a Documents within dep.doc.number range 
    If you post with RABUCH00, note 193984 could be relevant for you. 
    Check if the intervall in Table TABA don't fits with the Intervall in BKPF.
    Example:
    TABA
    MANDT BUKRS  AFBLGJ AFBLPE AFBANZ BLNRF      BLNRT      XBUKZ  
    100   XXXX   2010   004    01     4200000013 4200000016 X      
    100   XXXX   2010   005    01     4200000017 4200000020 X      
    100   XXXX   2010   006    01     4200000021 4200000024        
    On the other Hand In Table BKPF (or Tr. FB03) you can see that 4200000037 already   
    exits.                                                                               
    BUKRS  BELNR      GJAHR BLART BUDAT      CPUDT      CPUTM    TCODE
    XXXX   4200000024 2010  YY    30.06.2010 06.07.2010 19:36:30 ABF1 
    XXXX   4200000037 2010  YY    30.06.2010 06.07.2010 19:37:47 ABF1 
    Regards Bernhard

Maybe you are looking for

  • Problem with loading and unloading external swfs

    Hello Forum, I'm pretty new to as3, and it's giving me a great challenge. I have a large number of captivate files that I want to play inside a simple container built in CS5.5... but switching back and forth between all the movies hogs the memory lik

  • How do I save drawings in adobe ideas to itunes? Using a ipad

    i dont know how to do this. Im also using brushes I know its not adobe but i dont  know how to save using adobe ideas and in the brushes app.

  • Encoding in UNIX

    I am trying to print unicode characters from my java program to unix console, even though my default file encoding is UTF8, My character is printing garbage. here is my program and the output System.out.println(System.getProperty("file.encoding")); O

  • Calculations in Script Logic

    Dear Experts, I am trying to do some calculations using script logic. Foe example: In account dimension I have three members A, B & C. Now i want to do A = B multiply C using script logic. I will insert data for B and C. The B, C should get multiply

  • Firewire removable drive eject problem

    Hi I have one of those intermittent failures which is driving me crazy. I've got a Granite Digital removable FW-800 drive hooked up to my Quad (10.4.7). Also have a SATA removable drive bay. Most of the time, external drives work just great, and ther