Error when running netca in silent mode
I found a type-o in Oracle's documentation for running netca in silent mode. See link:
http://download-west.oracle.com/docs/html/B10811_05/app_nonint.htm#BABJFJID
There is a line that reads:
$ORACLE_HOME/bin/netca /silent /responsefile=/local_dir/netca.rsp
However, it should read:
$ORACLE_HOME/bin/netca /silent /responsefile /local_dir/netca.rsp
Hope this saves you all lots of headaches!
--Julie Johnson
user8909477 wrote:
i am running netca command in linuxGreat. But WHICH Linux???? Surprisingly it makes a difference. Just like asking to talk to a person, and specifying by family name, you might get the mother, the father, the son - and each might give a different response.
>
in /u01/oracle/TEST/db/tech_st/11.1.0/network/admin
i am going to TCPs litener with port 2484.
following error is appeared
so please Guide me to solve this problem.
Oracle Net Services Configuration:
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Are you logging on as root? Are you SU'ing to Oracle or trying to run as riit?
Try logging out - all the way out. Don't stop there, you need to log ALL the way out.
And then log in as user Oracle.
Logging in as root causes all sorts of headaches. Only SU to root, and then only when you absolutely need it.
Now that you have logged out of root, and logged in (not just su'd) to oracle, what happens??
Similar Messages
-
Error when running netca command
Hi guru's,
My database version ;11.1.0.7
i am running netca command in linux
in /u01/oracle/TEST/db/tech_st/11.1.0/network/admin
i am going to TCPs litener with port 2484.
following error is appeared
so please Guide me to solve this problem.
Oracle Net Services Configuration:
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
java.lang.NullPointerException
at oracle.ewt.lwAWT.BufferedApplet.<init>(Unknown Source)
at oracle.net.ca.NetCA.<init>(Unknown Source)
at oracle.net.ca.NetCA.main(Unknown Source)
Oracle Net Services configuration failed. The exit code is -1
Regards,
***SBJ***user8909477 wrote:
i am running netca command in linuxGreat. But WHICH Linux???? Surprisingly it makes a difference. Just like asking to talk to a person, and specifying by family name, you might get the mother, the father, the son - and each might give a different response.
>
in /u01/oracle/TEST/db/tech_st/11.1.0/network/admin
i am going to TCPs litener with port 2484.
following error is appeared
so please Guide me to solve this problem.
Oracle Net Services Configuration:
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Are you logging on as root? Are you SU'ing to Oracle or trying to run as riit?
Try logging out - all the way out. Don't stop there, you need to log ALL the way out.
And then log in as user Oracle.
Logging in as root causes all sorts of headaches. Only SU to root, and then only when you absolutely need it.
Now that you have logged out of root, and logged in (not just su'd) to oracle, what happens?? -
Running netca in silene mode to set up ldap for using OID
Hi,
I'm not sure if this is the right forum for this posting....
Our customer is in the process of automating the installation of their Oracle environment including the database, app server, and OID.
I'm in the process of looking into how a .rsp file would be configured to configure ldap and the OID directory server running NETCA in silent mode.
I'm a little confused about how this would be done because the only thing I've been able to see so far is adding LDAP to the NAMING_METHODS parameter in the rsp file.
Does anyone know how the other information (ie: Directory type, Directory service info, Oracle context, etc.) would be specified?
Thanks very much in advance,
Beth
Message was edited by:
brumpfHi,
Thanks so much for the feedback. But I finally found what I was looking for in the Oracle Database Net Services reference.
The parameters for the response file are:
DIRECTORY_SERVER_TYPE=oid
DIRECTORY_SERVERS=<host:port[<ssl port>]
DEFAULT_ADMIN_CONTEXT="DN for the server"
It was right in front of me the whole time and I didn't see it.... ugh!
Thanks again!
Beth
Message was edited by:
brumpf -
Corba error when running rich clients in 3-tier mode.
Hello
I am dealing with an Error when running Rich Clients (WebI and DeskI) with 3-tier ODBC connection to the server.
The client does come up and I'm able to create the query but when the data in refreshed I do get the error:
A database error occured. The database error text is: (CS) "CORBA Initialization failed". (WIS 10901).
I have a test server which I'm able to do this kind of connection without a problem but when I try to connect to the Prod server in 3-tier data connection mode throught the server I get this error.
My setup is:
BO XI R 3.1 FP. 2.1
Clients are also updated with FP 2.1
The data sources are Oracle and Teradata.
Best regards,
Hjortur.Hi Guys,
I am facing same error when I run the report from CMC. Error is like u201CThe database error text is: (CORBA) "Error on Executeu201D. (WIS 10901)u201DEven I have re-started the connection server but bad luck.
I would like to appreciate if someone help me out for the same.
Thanks in advance..!!
Thanks & Regards,
Keyur Modi | Functional Consultant Enterprise Solutions
TATA Technologies, Pune
m: +91-9769855899
website: www.tatatechnologies.com -
hi friends ,
My report Fetch from the orcle database , we installed Oracle 10g and 11g - clent 32 -bit on win 2k8 -64 bit machine .while design time runing fine,but ofter depolyement im facing below issue.
In error has occurred during report processing. (rsProcessingAborted)
The execution failed for the shared data set 'abc'. (rsDataSetExecutionError)
Cannot create a connection to data source ' Data source for shared dataset'. (rsErrorOpeningConnection)
Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.
An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
Any help is greatly appreciated, I have tried couple of solutions going through some threads online but no use and place dt tell install 1og r 11g 64-bitHi,
Based on the error message, we should confirm whether Oracle client tool has been installed on the Report Server at the beginning. If the Report Server installed is 64-bit, we should also install a 64-bit Oracle client tool on the Report Server. Besides, we
can also try to bypass tnsnames.ora file when connecting to Oracle by specifying all the information in the data source instead of using the TNS alias to connect
to the Oracle database. Please see the sample below:
Data Source=(DESCRIPTION=(CID=GTU_APP)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST= server01.mydomain.com)(PORT=1521)))(CONNECT_DATA=(SID=OracleDB)(SERVER=DEDICATED)));
Reference:http://blogs.msdn.com/b/dataaccesstechnologies/archive/2010/06/30/ora-12154-tns-could-not-resolve-the-connect-identifier-specified-error-while-creating-a-linked-server-to-oracle.aspx
Hope this helps.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support -
How to Run Rman in silent mode
when i run rman command to connect with the database then I get the following information message,
Recovery Manager: Release 10.2.0.1.0 - Production on Wed Mar 26 15:38:45 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: MYDB (DBID=2563653631)
Can i avoid this message and run it in silent mode ?On Windows, I am able to use this command :
rman < rman_backup_script.rmn > rman_backup.Logwhere the script file rman_backup_script.rmn contains
connect target /
backup database plus archivelog;The backup does run. It creates backupsets. It also creates rman_backup.Log which
contains these output lines :
Recovery Manager: Release 10.2.0.3.0 - Production on Sat Mar 29 23:11:28 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN>
connected to target database: OR10G2DB (DBID=138573118)
RMAN>
Starting backup at 29-MAR-08
current log archivedand do so on.
No screen output at all. -
Hi Team,
We are facing the following error when running the nightly ant build script on Mac machine for our air mobile application. We are using iOS native extensions and package with ADT. This works fine when we run the build as local user in the Mac machine. Earlier we faced some issues due to headless build and we have added the <headless-server>true</headless-server> in corresponding config files (flex-config.xml, airmobile-config.xml). After that we are facing the following error, even when we run the ant build in headless mode using the following command.
ant -Djava.awt.headless=true -f build.xml buildPackage
When running this build as local user in the Mac build machine, we see a window opening with com.adobe.air.ADT while packaging. This is the issue when running nightly build as there is no graphics window.
Can anybody please help how to get rid of this issue for nightly build using adt,jar?
Here is the error from build log:
buildiOSPackageWithNativeExtensionMac:
[echo] Export the iOS package with Native extension for ApprovalsMobile in Mac
[java] Exception in thread "main" java.lang.InternalError: Can't connect to window server - not enough permissions.
[java] at java.lang.ClassLoader$NativeLibrary.load(Native Method)
[java] at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1827)
[java] at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1724)
[java] at java.lang.Runtime.loadLibrary0(Runtime.java:823)
[java] at java.lang.System.loadLibrary(System.java:1045)
[java] at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
[java] at java.security.AccessController.doPrivileged(Native Method)
[java] at java.awt.Toolkit.loadLibraries(Toolkit.java:1605)
[java] at java.awt.Toolkit.<clinit>(Toolkit.java:1627)
[java] at java.awt.Dimension.<clinit>(Dimension.java:70)
[java] at com.adobe.air.validator.ApplicationDescriptorValidator.validateImageUri(ApplicationDescri ptorValidator.java:183)
[java] at com.adobe.air.validator.ApplicationDescriptorValidator20.validateElement(ApplicationDescr iptorValidator20.java:121)
[java] at com.adobe.air.validator.ApplicationDescriptorValidator25.validateElement(ApplicationDescr iptorValidator25.java:65)
[java] at com.adobe.air.validator.ApplicationDescriptorValidator26.validateElement(ApplicationDescr iptorValidator26.java:62)
[java] at com.adobe.air.validator.ApplicationDescriptorValidator30.validateElement(ApplicationDescr iptorValidator30.java:52)
[java] at com.adobe.air.validator.ApplicationDescriptorValidator31.validateElement(ApplicationDescr iptorValidator31.java:46)
[java] at com.adobe.air.validator.DescriptorValidator.endElement(DescriptorValidator.java:239)
[java] at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.endElement(AbstractSAXParser .java:601)
[java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(XML DocumentFragmentScannerImpl.java:1782)
[java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDri ver.next(XMLDocumentFragmentScannerImpl.java:2939)
[java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImp l.java:648)
[java] at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(XMLNSDocumentScanne rImpl.java:140)
[java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDo cumentFragmentScannerImpl.java:511)
[java] at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.ja va:808)
[java] at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.ja va:737)
[java] at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:119)
[java] at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java :1205)
[java] at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.j ava:522)
[java] at javax.xml.parsers.SAXParser.parse(SAXParser.java:395)
[java] at javax.xml.parsers.SAXParser.parse(SAXParser.java:198)
[java] at com.adobe.air.Descriptor.validateXML(Descriptor.java:182)
[java] at com.adobe.air.Descriptor.<init>(Descriptor.java:56)
[java] at com.adobe.air.ApplicationDescriptor.<init>(ApplicationDescriptor.java:84)
[java] at com.adobe.air.ApplicationPackager.validateApplicationDescriptor(ApplicationPackager.java: 101)
[java] at com.adobe.air.ApplicationPackager.createPackage(ApplicationPackager.java:64)
[java] at com.adobe.air.ipa.IPAPackager.createPackage(IPAPackager.java:217)
[java] at com.adobe.air.ADT.parseArgsAndGo(ADT.java:557)
[java] at com.adobe.air.ADT.run(ADT.java:414)
[java] at com.adobe.air.ADT.main(ADT.java:464)
Thanks,
Swathi.Note: Before the above error that were two other errors .
1) The build complained that the adt-bundle-linux toolchain could not be found and required that it be added to .mozconfig. This was done.
2) The build complained that dx could not be found.
The configure file was edited and the values $DX, $AAPT and $AIDL were all set to the adt-bundle-linux/sdk/build-tools/android-4.4 path.
The instructions given on the Mozilla Wiki did not work right for Android and several modifications were made to move it along. But this permission error is tough to figure out. -
HotSpot JVM InternaL Error when running on Mac OS X
I am getting the following error when running a Java process on Mac OS X 10.1.3. This
occurs after runing the process for a few hours. What could be the probable causes for
the same. The error message is given below:
# HotSpot Virtual Machine Error, Internal Error
# Please report this error at
# http://bugreport.apple.com/
# Error ID: /SourceCache/HotSpot/HotSpot-48/src/os/macosx/vm/os_macosx.cpp, 369
# Problematic Thread: prio=5 tid=0x4e31e80 nid=0x1975a50 runnable
Internal Error
Fatal: error setting thread exception port
Do you want to debug the problem?
*** malloc[1439]: error: Can't allocate regionI am getting the same error, while trying to debug on Windows XP.
I can reproduce it every time, but can't find much info about it.
Starting service Tomcat-Netbeans
Apache Tomcat/4.0.1
# HotSpot Virtual Machine Error, Internal Error
# Please report this error at
# http://java.sun.com/cgi-bin/bugreport.cgi
# Java VM: Java HotSpot(TM) Client VM (1.4.1-b21 mixed mode)
# Error ID: 5052455345525645255843455054494F4E0E435050001B
# Problematic Thread: prio=5 tid=0x0F229638 nid=0xb80 runnable -
Error when running a report in BPC NW
I am getting the following error when running a report for my application in BPC NW.
EVDRE encountered an error retrieving data from the Web Server (retrying in (X) seconds).
This error comes with this dialog option box to either continue or cancel retrying retrieving data. Retrying doesn't help either.
Any report I run (on any of my appsets), I get this error. I used the EVDRE function and also tried running a report using the template as the basis. But I get the error either way.
Does anyone know why this error is occurs or how to debug this issue. I saw some information about this in earlier threads but could not make much out of it.
Appreciate any assistance.Sanjay,
This is a very generic error...Couple of places to look for....
1)Reprocess the application (Modify application + Reassign SQL Index + Process Application)
2)optimizing the application sometimes helps (Full Optimize + Compress Database + Index defragmentation).
3)Create a "evdataserver_debug.txt" in user's private publication folder on server side to populate very detail level logging and check the log on client side EVDRE_LOG.txt for further peek into where things are getting messed up.
if evdataserver_debug.txt does not get populated on BPC 5.x...it is an issue with IIS authetication on Application server.
4)You have to check the event viewer into .NET server and also the BPC logs which can be found into
BPC\Logging for further details ..
Hope this helps..
Edited by: Vishal Mahawadhi on Jun 24, 2009 9:50 AM -
Getting the MDX query select error when running a webi report on BI query
Getting the following error when running a webi report on BI query :
A database error occured. The database error text is: The MDX query SELECT { [Measures].[D8JBFK099LLUVNLO7JY49FJKU] } ON COLUMNS , NON EMPTY [ZCOMPCODE].[LEVEL01].MEMBERS ON ROWS FROM [ZTEST_CUB/REP_20100723200521] failed to execute with the error Unknown error. (WIS 10901).
I have gone through many threads related to this error. But not able find the steps to follow for resoultion.
Please help in this regard.
Thanks,
JeethenderThe Fix Pack is also for Client Tools--it is a separate download. Please see the text below for ADAPT01255422
ADAPT01255422
Description:
Web Intelligence generates an incorrect MDX statement when a characteristic and a prompt are used.
The following database error happens: "The MDX query ... failed to execute with the error
Unknown error (WIS 10901)."
New Behavior:
This problem is resolved.
This information is also available in the Fixed Issues document for any Fix Pack greater than 2.2. -
Getting an Error When Running Server 2012 R2 adprep /forest prep on a 2012 DC
I am getting an error when running adprep /forest prep on a Server 2012 domain controller. The main parts of my domain are as follows:
2 - Domain Controllers running Server 2012
1 - Exchange Server 2013 running on Server 2012
I am trying to either do an in-place upgrade to my domain controllers to Server 2012 R2 or even introduce a Server 2012 R2 domain controller into the domain. The error I am getting is as follows:
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_search_s() finished, return code is 0x20
[2014/04/05:09:12:38.873]
Adprep verified the state of operation cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_modify_s(). The entry to modify is CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_modify_s() finished, return code is 0x13
[2014/04/05:09:12:38.905]
Adprep was unable to modify some attributes on object CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[User Action]
Check the log file ADPrep.log in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
[2014/04/05:09:12:38.936]
Adprep encountered an LDAP error.
Error code: 0x13. Server extended error code: 0x20b1, Server error message: 000020B1: AtrErr: DSID-030F112A, #1:
0: 000020B1: DSID-030F112A, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 9086f (msDS-ClaimIsValueSpaceRestricted)
DSID Info:
DSID: 0x181112dd
ldap error = 0x13
NT BUILD: 9600
NT BUILD: 16384
[2014/04/05:09:12:38.967]
Adprep was unable to update forest information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
[User Action]
Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
Any Help would be appreciated. Thanks!Hi,
did you check which servers has FSMO roles?
You can do that via command prompt: netdom query fsmo
For forestprep you must do that on DC which have Schema Operations marter role.
Command
Domain controller
Number of times to run the command
adprep /forestprep
Must be run on the schema operations master for the forest.
Once for the entire forest
adprep /domainprep
Must be run on the infrastructure operations master for the domain.
Once in each domain where you plan to install an additional domain controller that runs a later version of Windows Server than the latest version that is running in the domain.
Note
Domains where you will not add a new domain controller will be affected by adprep /forestprep, but they do not require you to run adprep /domainprep.
http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx -
ORA-06502 - Error when running "Ask The Expert 0.9"
Hi ,
I successfully installed "Ask the Expert" package with Apex 3.0 on Oracle 10g Database 10.2.0.1.0. No error ocurred during the import in my Apex environment.
Besides that, i'm having problems when i tried to run the "Aks the Expert". It always shows the following message errors:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
Error Unable to write activity log.
I think it was a problem with APEX instalation, but i could run the Sample Application of Apex without any problem.
I opened an SR in Metalink, but to my surprise, the analist of support don't know what's wrong with the demo "Ask de Expert".
The debug function of the application show the following commands before the error ocurrs:
0.01:
0.01: S H O W: application="103" page="1" workspace="" request="" session="6648566035252817"
0.01: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: NLS: CSV charset=WE8MSWIN1252
0.01: ...NLS: Set Decimal separator="."
0.01: ...NLS: Set NLS Group separator=","
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: ...Setting session time_zone to -03:00
0.02: NLS: Language=en-us
0.02: Application 103, Authentication: CUSTOM2, Page Template: 667896385843019243
0.02: ...Determine if user "N3COUTINHO" workspace "951808960237899" can develop application "103" in workspace "951808960237899"
0.02: ...ok to reuse builder session for user:nobody
0.03: ...Application session: 6648566035252817, user=nobody
0.03: ...Determine if user "N3COUTINHO" workspace "951808960237899" can develop application "103" in workspace "951808960237899"
0.03: Session: Fetch session header information
0.03: ...Metadata: Fetch page attributes for application 103, page 1
0.03: Fetch session state from database
0.03: Branch point: BEFORE_HEADER
0.03: Fetch application meta data
0.04: Computation point: BEFORE_HEADER
0.04: ...Perform computation of item: P1_CLEAN_CRITERIA, type=FUNCTION_BODY
0.04: ...Performing function body computation
0.06: ...Session State: Save "P1_CLEAN_CRITERIA" - saving same value: ""
0.06: Processing point: BEFORE_HEADER
0.06: ...Process "Read and Write Activity Cookie": PLSQL (BEFORE_HEADER) declare l_cookie_id number; begin owa_util.mime_header('text/html', FALSE); -- ate_api.read_activity_cookie; l_cookie_id := ate_api.fetch_activity_cookie_val( 'COOKIE_ID' ); -- if l_cookie_id is null then l_cookie_id :=
Content-type: text/html; charset=ISO-8859-1 Set-Cookie: activity_ask_expert=1|2400346189796; expires=Wed, 01-Jan-2020 08:00:00 GMT; path=/;
0.06: Encountered unhandled exception in process type PLSQL
0.06: Show ERROR page...
0.06: Performing rollback...
Please, could any one help me to solve this problem ? Metalink couldn't help me diagnosing what's wrong.
Thanks,
Sergio CoutinhoHi,
I don´t know if it help the analisis, but i collect some informations about my environment:
1) HTML DB version
3.0.1
2) Database version
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
3) Database server operating system (as well, if 32-bit or 64-bit)
Solaris 5.9 - 64 bits
4) Database Parameters:
PARAMETER VALUE
NLS_CALENDAR GREGORIAN
NLS_CHARACTERSET WE8ISO8859P1
NLS_COMP BINARY
NLS_CURRENCY $
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_DUAL_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_LANGUAGE AMERICAN
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_NCHAR_CONV_EXCP FALSE
NLS_NUMERIC_CHARACTERS .,
NLS_RDBMS_VERSION 10.2.0.1.0
NLS_SORT BINARY
NLS_TERRITORY AMERICA
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_TIME_FORMAT HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
Could it explain why ASK THE EXPERT is running on hosted apex site and it´s
generating error when running in my environment?
Thanks for the help !
Sergio -
Getting the below error when running the Baseline.grf for the first time
I am getting the below error when running the Baseline.grf for the first time.
Appreciate your support in resolving it.
Error below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Baseline.grf
INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Baseline)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
INFO [RUN_GRAPH1_0] - Checking graph configuration...
INFO [RUN_GRAPH1_0] - Graph configuration is valid.
INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
java.lang.NullPointerException
at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
at org.jetel.graph.Phase.free(Phase.java:487)
at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
at org.jetel.component.RunGraph.execute(RunGraph.java:302)
at org.jetel.graph.Node.run(Node.java:414)
at java.lang.Thread.run(Thread.java:619)
WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
ERROR [WatchDog] - Node RUN_GRAPH1 error details:
org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
at org.jetel.component.RunGraph.execute(RunGraph.java:324)
at org.jetel.graph.Node.run(Node.java:414)
at java.lang.Thread.run(Thread.java:619)
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 2 20132
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
#echo $CLOVER_LIB/*
for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
done;
#for i in `ls $CLOVER_LIB/*.jar`; do
#echo $i
#done;
You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
HTH,
Dan
http://branchbird.com -
SQL serever 2012 Setup has encountered an error when running a windows installer file
I am trying to install SQL server 2012 Express on a windows 7 PC for 2 days now. I feel like banging my head against the wall.
I keep getting the following errors here's the full log
The following error has occurred:
SQL Server Setup has encountered an error when running a Windows Installer file.
Windows Installer error message: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'. Please refer
to Help and Support for more information. HRESULT: 0x8007054F. Windows Installer file: C:\Users\Receno\AppData\Local\Temp\SQL Server 2012\Setup\1033_ENU_LP\x64\setup\sqlsupport_msi\SqlSupport.msi Windows Installer log file: C:\Program Files\Microsoft SQL Server\110\Setup
Bootstrap\Log\20150109_213740\SqlSupport_Cpu64_1_ComponentUpdate_1.log
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDC80C325hmmm..so which hotfix do I apply ?
SQL Server 2012
All (Global) x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global) x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global) x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global) x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global)
x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
<input id="chk471373" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
<input id="chk471368" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
<input id="chk471370" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
<input id="chk471371" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
<input id="chk471374" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
<input id="chk471372" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
<input id="chk471369" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
<input id="chk471367" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global)
x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
<input id="chk471373" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
<input id="chk471368" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
<input id="chk471370" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
<input id="chk471371" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
<input id="chk471374" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
<input id="chk471372" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
<input id="chk471369" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
<input id="chk471367" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global)
x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
<input id="chk471373" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
<input id="chk471368" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
<input id="chk471370" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
<input id="chk471371" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
<input id="chk471374" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
<input id="chk471372" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
<input id="chk471369" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
<input id="chk471367" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86 -
ORA-04062 error when running forms with different users
ORA-04062 error when running forms with different users
I have a form that has a block that should display some data from another users tables. (The other user's name is dynamic, it's selected from a list box)
I wrote a stored procedure to get the data from other user's tables.
When I compile the form and run it with the same user I compiled, it works without any error. But when I run the compiled form with another user I get the ORA-04062 (signature of procedure has been changed) error.
I tried setting REMOTE_DEPENDENCIES_MODE to SIGNATURE in init.ora but it didn't help.
My Forms version is 6i with Patch 15.
Database version is 9.
Here is my stored procedure:
TYPE Scenario_Tab IS TABLE OF NUMBER(34) INDEX BY BINARY INTEGER;
TYPE Open_Curs IS REF CURSOR;
PROCEDURE Get_Scenarios(User_Name IN VARCHAR2, Scen_Table OUT Scenario_Tab) IS
Curs Open_Curs;
i NUMBER;
BEGIN
OPEN Curs FOR
'SELECT Seq_No FROM '|| User_Name ||'.scenario';
i := 1;
LOOP
FETCH Curs INTO Scen_Table(i);
EXIT WHEN Curs%NOTFOUND;
i := i + 1;
END LOOP;
END Get_Senarios;
I would be happy to solve this problem. It's really important.
Maybe somebody can tell me another way to do what I want to do. (getting a list of values from another users tables)I think it should be a better solution to create a package,
and put your own TYPES and procedure into it.
CREATE OR REPLACE PACKAGE PKG_XXX IS
TYPE TYP_TAB_CHAR IS TABLE OF .... ;
PROCEDURE P_XX ( Var1 IN VARCHAR2, var2 IN OUT TYP_TAB_CHAR );
END ;
Then in your Form :
Declare
var PKG_XXX.TYP_TAB_CHAR ;
Begin
PKG_XXX.P_XX( 'user_name', var ) ;
End ;
Maybe you are looking for
-
Why my iphone 5 turns off while recording videos ???
please help !!!!! i m extreamly disappointed in apple ;[
-
Why do I get Spaces when I add a new line?
Finally broke down and have retired HomeSite+. Not sure that is a good idea though... A few things are bugging me about ColdFusion Builder 2 such as: I have auto indent turned on for tabs only and a tab is set to 3 spaces wide. I have done this in e
-
FF4, drag 2nd tab to new window. 2. top dragbar is off screen at top. I unmaximize the original screen, now that one also pushes the drag bar to the top off the screen. I resize the bottom of the screen and I can see a sliver of the top dragbar. If I
-
Can't locate template location - application support missing/empty
I am trying to install a keynote template that I have downloaded from the internet. Keynote tells me: Keynote can't save the theme because the disk is full or you do not have permission to write to this disk. I followed some instructions about search
-
I am really stupid of this right now. Have not tried the regular SQL for long time, so my question is that I have a table- Cost A B C D E F 0002 6002 5 55 68.35 6.12 0003 6003 5 99.26 89.33