Error when running package to load data from InfoProvider

I encounter the following error when using the standard package to load data from a InfoProvider to BPC. I tried loading the data from both DSO and InfoCube, but I get the same error.
The log message where the error occurs is as follows:
Task name CLEAR CUBE DATA:
Could not perform write (INHERITED ERROR)
The "convert" step of the process chain completed successfully. This error is happening when the "clear cube according data" step of the process chain gets executed.
Any ideas on why this is happening?
Thanks.

Hi Laeral:
You should be able to just open one VISA session then write and read both commands then close the session at the end. This sounds to me like an error that comes from trying to open two VISA sessions to the instrument at the same time. I have attached some very basic LabVIEW VISA code that writes and reads two different commands. Hopefully it will get you started.
Regards,
Emilie S.
Applications Engineer
National Instruments
Attachments:
Basic VISA Example Two Commands.vi ‏39 KB

Similar Messages

Error when executing interface which load data from csv file which has 320

Hi,
Can some one provide a resolution for below error:
I have created an interface which load data from csv file which has 320 columns, to a Synonym which has 320 columns in it
using LKM File to SQL, IKM Sql Control Append.
I am getting below error when executing the interface :
com.sunopsis.tools.core.exception.SnpsSimpleMessageException: ODI-17517: Error during task interpretation. Task: 6 java.lang.Exception: BeanShell script error: Sourced file: inline evaluation of: ``out.print("The application script threw an exception: java.lang.StringIndexOutOf . . . '' Token Parsing Error: Lexical error at line 2, column 42. Encountered: "\\" (92), after : "": <at unknown location> BSF info: Create external table at line: 0 column: columnNo
at com.sunopsis.dwg.codeinterpretor.SnpCodeInterpretor.transform(SnpCodeInterpretor.java:485)
     at com.sunopsis.dwg.dbobj.SnpSessStep.createTaskLogs(SnpSessStep.java:711)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:461)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:662)
Caused by: org.apache.bsf.BSFException: BeanShell script error: Sourced file: inline evaluation of: ``out.print("The application script threw an exception: java.lang.StringIndexOutOf . . . '' Token Parsing Error: Lexical error at line 2, column 42. Encountered: "\\" (92), after : "": <at unknown location>
BSF info: Create external table at line: 0 column: columnNo
     at bsh.util.BeanShellBSFEngine.eval(Unknown Source)
     at bsh.util.BeanShellBSFEngine.exec(Unknown Source)
     at com.sunopsis.dwg.codeinterpretor.SnpCodeInterpretor.transform(SnpCodeInterpretor.java:471)
     ... 11 more
Text: The application script threw an exception: java.lang.StringIndexOutOfBoundsException: String index out of range: 2 BSF info: Create external table at line: 0 column: columnNo
out.print("createTblCmd = r\"\"\"\ncreate table ") ;
out.print(odiRef.getTable("L", "COLL_NAME", "W")) ;
out.print("<?=(extTabColFormat.getUseView())?\"_ET\":\"\"?>\n(\n\t") ;
out.print(odiRef.getColList("", "[CX_COL_NAME]\\t"+
          "<?=extTabColFormat.getExtTabDataType(\\u0022[CX_COL_NAME]\\u0022,\\u0022[SOURCE_DT]\\u0022, \\u0022[DEST_WRI_DT]\\u0022, \\u0022[COL_FORMAT]\\u0022, \\u0022[BYTES]\\u0022, \\u0022[LONGC]\\u0022, \\u0022[SCALE]\\u0022)?>"
     , ",\\n\\t", "","")) ;
out.print("\n)\nORGANIZATION EXTERNAL\n(\n\tTYPE ORACLE_LOADER\n\tDEFAULT DIRECTORY dat_dir\n\tACCESS PARAMETERS\n\t(\n\t\tRECORDS DELIMITED BY 0x'") ;
out.print(odiRef.getSrcTablesList("[XFILE_SEP_ROW]","")) ;
out.print("'\n\t\t") ;
out.print(odiRef.getUserExit("EXT_CHARACTERSET")) ;
out.print("\n\t\t") ;
out.print(odiRef.getUserExit("EXT_STRING_SIZE")) ;
out.print("\n\t\tBADFILE\t\t'") ;
out.print(odiRef.getSrcTablesList("", "[RES_NAME]", "", "")) ;
out.print("_%a.bad'\n\t\tLOGFILE\t\t'") ;
out.print(odiRef.getSrcTablesList("", "[RES_NAME]", "", "")) ;
out.print("_%a.log'\n\t\tDISCARDFILE\t'") ;
out.print(odiRef.getSrcTablesList("", "[RES_NAME]", "", "")) ;
out.print("_%a.dsc'\n\t\tSKIP \t\t") ;
out.print(odiRef.getSrcTablesList("", "[FILE_FIRST_ROW]", "", "")) ;
out.print("\n") ;
if (odiRef.getSrcTablesList("", "[FILE_FORMAT]", "", "").equals("F")) {out.print("\n\t\tFIELDS\n\t\t") ;
out.print(odiRef.getUserExit("EXT_MISSING_FIELD")) ;
out.print("\n\t\t(\n\t\t\t") ;
out.print(odiRef.getColList("", "[CX_COL_NAME]\\tPOSITION([FILE_POS]:[FILE_END_POS])\\t"+
                    "<?=extTabColFormat.getExtTabFormat(\\u0022[CX_COL_NAME]\\u0022,\\u0022[SOURCE_DT]\\u0022, \\u0022DEST_WRI_DT\\u0022, \\u0022[COL_FORMAT]\\u0022, \\u0022[BYTES]\\u0022, \\u0022[LONGC]\\u0022, \\u0022[SCALE]\\u0022)?>"
                    , ",\\n\\t\\t\\t", "","")) ;
out.print("\t\t\n\t\t)\n\t)\n") ;
} else {out.print("\n\t\tFIELDS TERMINATED BY x'") ;
out.print(odiRef.getSrcTablesList("", "[XFILE_SEP_FIELD]", "", "")) ;
out.print("'\n\t\t") ;
if(odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").equals("")){out.print("\n\t\t") ;
} else {out.print("OPTIONALLY ENCLOSED BY '") ;
out.print(odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").substring(0,1)) ;
out.print("' AND '") ;
out.print(odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").substring(1,2)) ;
out.print("' ") ;
}out.print("\n\t\t") ;
out.print(odiRef.getUserExit("EXT_MISSING_FIELD")) ;
out.print("\n\t\t(\n\t\t\t") ;
out.print(odiRef.getColList("", "[CX_COL_NAME]\\t"+
                    "<?=extTabColFormat.getExtTabFormat(\\u0022[CX_COL_NAME]\\u0022,\\u0022[SOURCE_DT]\\u0022, \\u0022DEST_WRI_DT\\u0022, \\u0022[COL_FORMAT]\\u0022, \\u0022[BYTES]\\u0022, \\u0022[LONGC]\\u0022, \\u0022[SCALE]\\u0022)?>"
                    , ",\\n\\t\\t\\t", "","")) ;
out.print("\t\t\n\t\t)\n\t)\n") ;
}out.print("\tLOCATION (") ;
out.print(odiRef.getSrcTablesList("", "'[RES_NAME]'", "", "")) ;
out.print(")\n)\n") ;
out.print(odiRef.getUserExit("EXT_PARALLEL")) ;
out.print("\nREJECT LIMIT ") ;
out.print(odiRef.getUserExit("EXT_REJECT_LIMIT")) ;
out.print("\n\"\"\"\n \n# Create the statement\nmyStmt = myCon.createStatement()\n \n# Execute the trigger creation\nmyStmt.execute(createTblCmd)\n \nmyStmt.close()\nmyStmt = None\n \n# Commit, just in case\nmyCon.commit()") ;
****** ORIGINAL TEXT ******
createTblCmd = r"""
create table <%=odiRef.getTable("L", "COLL_NAME", "W")%><?=(extTabColFormat.getUseView())?"_ET":""?>
     <%=odiRef.getColList("", "[CX_COL_NAME]\t"+
          "<?=extTabColFormat.getExtTabDataType(\u0022[CX_COL_NAME]\u0022,\u0022[SOURCE_DT]\u0022, \u0022[DEST_WRI_DT]\u0022, \u0022[COL_FORMAT]\u0022, \u0022[BYTES]\u0022, \u0022[LONGC]\u0022, \u0022[SCALE]\u0022)?>"
     , ",\n\t", "","")%>
ORGANIZATION EXTERNAL
     TYPE ORACLE_LOADER
     DEFAULT DIRECTORY dat_dir
     ACCESS PARAMETERS
          RECORDS DELIMITED BY 0x'<%=odiRef.getSrcTablesList("[XFILE_SEP_ROW]","")%>'
          <%=odiRef.getUserExit("EXT_CHARACTERSET")%>
          <%=odiRef.getUserExit("EXT_STRING_SIZE")%>
          BADFILE          '<%=odiRef.getSrcTablesList("", "[RES_NAME]", "", "")%>_%a.bad'
          LOGFILE          '<%=odiRef.getSrcTablesList("", "[RES_NAME]", "", "")%>_%a.log'
          DISCARDFILE     '<%=odiRef.getSrcTablesList("", "[RES_NAME]", "", "")%>_%a.dsc'
          SKIP           <%=odiRef.getSrcTablesList("", "[FILE_FIRST_ROW]", "", "")%>
<% if (odiRef.getSrcTablesList("", "[FILE_FORMAT]", "", "").equals("F")) {%>
          FIELDS
          <%=odiRef.getUserExit("EXT_MISSING_FIELD")%>
               <%=odiRef.getColList("", "[CX_COL_NAME]\tPOSITION([FILE_POS]:[FILE_END_POS])\t"+
                    "<?=extTabColFormat.getExtTabFormat(\u0022[CX_COL_NAME]\u0022,\u0022[SOURCE_DT]\u0022, \u0022DEST_WRI_DT\u0022, \u0022[COL_FORMAT]\u0022, \u0022[BYTES]\u0022, \u0022[LONGC]\u0022, \u0022[SCALE]\u0022)?>"
                    , ",\n\t\t\t", "","")%>
<%} else {%>
          FIELDS TERMINATED BY x'<%=odiRef.getSrcTablesList("", "[XFILE_SEP_FIELD]", "", "")%>'
          <% if(odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").equals("")){%>
          <%} else {%>OPTIONALLY ENCLOSED BY '<%=odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").substring(0,1)%>' AND '<%=odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").substring(1,2)%>' <%}%>
          <%=odiRef.getUserExit("EXT_MISSING_FIELD")%>
               <%=odiRef.getColList("", "[CX_COL_NAME]\t"+
                    "<?=extTabColFormat.getExtTabFormat(\u0022[CX_COL_NAME]\u0022,\u0022[SOURCE_DT]\u0022, \u0022DEST_WRI_DT\u0022, \u0022[COL_FORMAT]\u0022, \u0022[BYTES]\u0022, \u0022[LONGC]\u0022, \u0022[SCALE]\u0022)?>"
                    , ",\n\t\t\t", "","")%>
<%}%>     LOCATION (<%=odiRef.getSrcTablesList("", "'[RES_NAME]'", "", "")%>)
<%=odiRef.getUserExit("EXT_PARALLEL")%>
REJECT LIMIT <%=odiRef.getUserExit("EXT_REJECT_LIMIT")%>
# Create the statement
myStmt = myCon.createStatement()
# Execute the trigger creation
myStmt.execute(createTblCmd)
myStmt.close()
myStmt = None
# Commit, just in case
myCon.commit().
     at com.sunopsis.dwg.dbobj.SnpSessStep.createTaskLogs(SnpSessStep.java:738)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:461)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:662)

The issue is encountered because the text delimiter used in the source file did not consist of a pair of delimiters.
Please see support Note [ID 1469977.1] for details.

Transfer(IDocs and TRFC) error when use infopackage to load data from R/3

I create an infopackage to load data from R/3, when start immediately ,there is no data transfered. The return error is :
transfer(IDocs and TRFC): Errors occurred
request IDoc: Application document not posted
Does anybody know how can correct this error?
Thanks great.

Hi Yimeng,
Check in SM58 transaction code in R/3 and see if any LUWs are stuck there. If so you can execute them manually and complete the data load.
regards,
Sumit

Error when running VI to acquire data from multiple channels

Hello there, I am currently trying to write a LabVIEW program interfacing with the Agilent 34970A data acquisition unit. Have managed to get seperate VIs to acquire temperature and voltage data and to graph the data. Running them separately is fine.
However when I try run one after the other, (ie, run temperature acquisition VI, then voltage acquisition VI; or vice versa) the first one runs OK, but upon trying to run the second one I get a VISA error along the lines of "VISA write". When I try to run the first VI again, that one fails to acquire readings as well. Any way I can rectify this problem? (Want to combine the VI's into a single program.) Thanks!

Hi Laeral:
You should be able to just open one VISA session then write and read both commands then close the session at the end. This sounds to me like an error that comes from trying to open two VISA sessions to the instrument at the same time. I have attached some very basic LabVIEW VISA code that writes and reads two different commands. Hopefully it will get you started.
Regards,
Emilie S.
Applications Engineer
National Instruments
Attachments:
Basic VISA Example Two Commands.vi ‏39 KB

SAP BPC 10 NW loading data from Infoprovider (data value issue in BPC)

Hi Experts,
We are on SAP BPC 10 - 801 NW - SP05
We are having an error when loading data from infoprovider, we tested in DEV and QA and have similar behaviour: data values which are stored in infoprovider are loaded into BPC model with no differences.
However after make a transport procedure into PROD environment and then loading data into BPC Model something happens: suppose that 100,00 is a data value stored in a BW infoprovider, after loading data into BPC from this infoprovider, different data value is loaded into BPC. E.G 100,0 is in BW , but 10000,0 is store in BPC
Is there any idea to fix it or check it?
Thanks for your answer

Hi Giovanni,
This case occurs with colombian currency and others.
Compare the table TCURX in DEV, QA and PRD.
There must be an entry for currency COP only in PRD.
Like
CURRKEY CURRDEC
COP 0
Note 1240163 explain this behavior.
If you need the value to be stored in 100,00 format in BPC, you can create a routine to convert this value.

Error when running the OWB process flow from the shell script

Hi,
I am able to deploy the process flow succesfully but when I execute the process flow from the shell script,I am getting the following error.Previously it worked fine.
I had to make some chnage in the IP address,so i had to deploy again.
Connected.
SQL> @/oracle/product/owb92028/owb/rtp/sql/oem_exec_template.sql OWB_RTR LOC_P_REL PROCESS P_W_SOURCE "," ","
Elapsed: 00:00:00.00
Elapsed: 00:00:00.01
Stage 1: Decoding Parameters
| location_name=LOC_P_REL
| task_type=ProcessFlow
| task_name=P_W_SOURCE
Stage 2: Opening Task
declare
ERROR at line 1:
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "OWB_RTR.WB_RT_API_EXEC", line 17
ORA-06512: at "OWB_RTR.WB_RT_API_EXEC", line 137
ORA-06512: at "OWB_RTR.WB_RT_API_EXEC", line 164
ORA-06512: at line 205
Thanks in advance.
Vinay

Hi Kamal and kanakam kolla,
This is just to let you know that,I solved my problem little differently by creating a new location and deployed the process flow.Now my process flow is working fine when i call from the shell script.What i see is that, it does not update properly when we update and redeploy the process flow.So far this is the work arround i could think off and i succesfully tested this.
Thank you Kamal and kanakam kolla,for giving a thought towards my problem.
Thanks
Vinay

CUOM error when trying to poll performance data from IPCC Express

Hi Network Professionals,
Using CUOM 2.1 SP1 I get an error when trying to access the Performance menu for a IPCC Express Server in the Service Level View.
Error Message:
Performance polling is not supported for the current capability.
The server is fully monitored and I get enviroment, system, interface and application information.
I the Polling Parameters menu (Voice Utilization Settings) the only parameter listed is "Communication Manager and Registred MGCP Gateway Utilization".
The IPCC Express version is 5.0.(2)SR01_Build045.
Is anything missing on the IPCC server? I have only configured it with SNMP.
Kind Regards
Johnny Olsen

hi teresa.
well I bother you because I have a problem similar to that raised earlier, I have a vm INTAL CUOM 2.1 SP1 and the problem is that computers add-in-law his administration IPCC view the service level ... but when I fall into a custom group created the group and add the teams the same ip ipcc already visible, in my group I want to generate displays custom cloud but do not show me the equipment, except that I want to add IVR servers and I do not under any circumstances the samples .. lso probe and reset everything and anything related services, install the SP! and nothing. Can you help me with this or if I recommend CUOM up version of the 2.3 that I could not even see the difference with 2.1 CUOM thanks greetings

Error when running a CO-PA data source

Hi all, I just created a CO-PA data source,
when I try to run it in RSA6 Im getting the following error:
No source could be found to answer the search query
Any body knows what might be happening?
pleaseeeee help.
thanks

Hi, it is available, the problem is when I try to run it, then I get that error.
I went to transaction KEDV and all the camps in the summarization level are in my data source, so then I dont know what can be the problem, any ideas?

Error when trying to view siebel data from BI Publisher

Hi,
I am trying to view Siebel data in BI publisher via a web service (webservice definition is set to complex in BIP) but when I try to do this I receive the message 'Requested data type does not match with existing data type'.
I am using version 10.1.3.3 of BI Publisher and 8.1.1.2 of Siebel E Clinical.

hi teresa.
well I bother you because I have a problem similar to that raised earlier, I have a vm INTAL CUOM 2.1 SP1 and the problem is that computers add-in-law his administration IPCC view the service level ... but when I fall into a custom group created the group and add the teams the same ip ipcc already visible, in my group I want to generate displays custom cloud but do not show me the equipment, except that I want to add IVR servers and I do not under any circumstances the samples .. lso probe and reset everything and anything related services, install the SP! and nothing. Can you help me with this or if I recommend CUOM up version of the 2.3 that I could not even see the difference with 2.1 CUOM thanks greetings

Error when running allocation logic

I am running the following allocation logic and get the following error:
*RUNALLOCATION
*FACTOR=USING/TOTAL
*DIM P_ACCT WHAT=CE0004010; WHERE=CE0004020; USING=CE0004030; TOTAL=<<<
*DIM ENTITY WHAT=A1000; WHERE=<<<; USING=<<<; TOTAL=<<<
*DIM TIME WHAT=2009.JAN; WHERE=>>>; USING=BAS(2009.TOTAL); TOTAL=<<<
*ENDALLOCATION
UJP_RULE_EXCEPTION:Missing [] on property name: WHAT=CE0004010. I get this error when executing the script using the program "UJK_SCRIPT_LOGIC_TESTER". I also get a similar error when running it via the data manager package.
Any thoughts on why this error is happening?

Hi Sanjay,
I think you are using formula property for any of the dimension member used in the Allocation logic.
FYI Allocation will not work fine for the dimension members which is calculated using the formula written in the formula Property.
There is no problem with your script it looks fine.
Hope this might help you.
Regards,
G.Vijaya Kumar

Syntax error when running ActionFileToXML.jsx or trying to install xtools

I have an action set (actually a few) that I would REALLY love to rename but the actions are calling "sub" actions within the action set which means that the action set name is hard-coded into the actions in many places.
Originally, I tried to edit my actions with a hex editor to try and change the name and references but realised I was limited to renaming with the same number of characters unless I parsed the file first... so I gave up on that. Then I came across Xbytor's awesome ActionFileToXML script, but I get a syntax error when running both the To and From XML scripts at root.@date = Stdlib.toISODateString();
I then figured I would go straight for the latest xtools instead but when running the install (in CS2) I get a rather long syntax error and so the install fails. The script mentioned that there is a log file that I should email to Xbytor, but I figured I would post here instead of bothering him directly so he has more of a choice about whether he wants to be bothered by me Or maybe someone else can answer if it is a stupid newbie problem.
Thanks heaps!
Gab
ETA: I'm running CS2 on XP if that makes any difference. If so, I may be able to use a friend's Mac with CS3.

Thanks for the quick (and very useful) response!
I made the changes to the mentioned files and the scripts were able to
progress further, but only until the next E4X syntax (node.@key=key;).
Rather than continue to hack at your code, I figured I should downgrade to a
previous version (as you also suggested). I initially tried v1.5 and the
ActionFileToXML worked perfectly but ActionFileFromXML failed with an
illegal argument error.
Before looking too deeply into the error, I figured I would try v1.6 and
found that both the scripts were able to complete successfully. The
resulting atn file has a couple of bugs in it (such as "Set current layer"
having a knockout setting of which causes the action to crash),
but nothing that I can't just copy back from my original script.
Thanks HEAPS for your assistance and for the awesome scripts in the first
place! Extremely greatly appreciated!

Loading data from multiple files to multiple tables

How should I approach on creating SSIS package to load data from multiple files to multiple tables. Also, Files will have data which might overlap so I might have to create stored procedure for it. Ex. 1st day file -data from au.1 - aug 10 and 2nd day
file might have data from aug.5 to aug 15. So I might have to look for max and min date and truncate table with in that date range.

thats ok. ForEachLoop would be able to iterate through the files. You can declare a variable inside loop to capture the filenames. Choose fully qualified as the option in loop
Then inside loop
1. Add execute sql task to delete overlapping data from the table. One question here is where will you get date from? Does it come inside filename?
2. Add a data flow task with file source pointing to file .For this add a suitable connection manager (Excel/Flat file etc) and map the connection string property to filename variable using expressions
3. Add a OLEDB Destination to point to table. You can use table or view from variable - fast load option and map to variable to make tablename dynamic and just set corresponding value for the variable to get correct tablename
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Loading data from PROD to Sandbox.

Hi All,
What are the steps that need to be taken when i want to load data from a PROD sys to another BW sys?
When i'm selecting the PROD sys as Source system in the Sandbox, it says
"No available DataSources for source system PAW400 exist".
Now how should i go abt it? What needs to be done on PROD and what needs to be done on Sandbox? Any step wise directions would be appreciated and fully rewarded.
Thanks,
Mav

Hi Maverick,
Step 1 Make sure the coomunication channel is set betn two systems- Basis team should help you with that
Step 2 In Sandbox you need to create export datasource fo respective cube.
Step 3 you need to have the application component hierarchy transferred from Prod to Sanbox- there is a option to that in SPRO(look for Transfer Application Component Hierarchy)
this what is metioned in SAP help -
Transfer Application Component Hierarchy
In this step, you transfer and activate the application component hierarchy delivered by SAP and, if applicable, any partner application hierarchies.
After the DataSources have been replicated in BW, this application component hierarchy is displayed along with the DataSources that were transferred with it, in the source system view of the Administrator Workbench - Modeling. Choose DataSource Overview from the source system context menu (right mouse-click) in the BW.
Step 4 Then once the Application comp hierarchy is tranferred you can replicate the datasources
Please assign the points if this works for you
regards
Poonam

Error when trying to load data from ODS to CUBE

hi,
Iam getting a short dump when trying to load data from ODS to CUBE. The Run time error is 'TYPELOAD_NEW_VERSION' and the short text is 'A newer version of data type "/BIC/AZODS_CA00" was found than one required.please help me out.

Hi,
Check this thread.........Ajeet Singh has given a good solution here.........
Re: Error With Data Load-Getting Canceled Right Away
Also check SAP note: 382480..................for ur reference............
Symptom
A DART extraction job terminates with runtime error TYPELOAD_NEW_VERSION and error message:
Data type "TXW_INDEX" was found in a newer version than required.
The termination occurs in the ABAP/4 program "SAPLTXW2 " in "TXW_SEGMENT_RECORD_EXPORT".
Additional key words
RTXWCF01, LTXW2U01, TXW_INDEX
Cause and prerequisites
This problem seems to happen when several DART extraction jobs are running in parallel, and both jobs access table TXW_INDEX.
Solution
If possible, avoid running DART extractions in parallel.
If you do plan to run such jobs in parallel, please consider the following points:
In the DART Extract configuration, increase the value of the parameter "Maximum memory allocation for index (MB)" if possible. You can estimate reasonable values with the "File size worksheet" utility.
Run parallel DART jobs on different application servers.
As an alternative, please apply note 400195.
It may help u.........
Regards,
Debjani.......

Error when loading data from DSO to Cube

Hi,
After upgrading to 2004s we get the following error message when trying to load data from a DSO to a Cube:
Unexpected error: RSDRC_CONVERT_RANGES_TO_SELDR
Has anyone experienced a similar problem or have some guidelines on how to resolve it?
Kind regards,
Fredrik

Hej Martin,
Tack!
Problem solved
//Fredrik

Error when running package to load data from InfoProvider

Similar Messages

Maybe you are looking for