Error when running setup table for 2LIS_03_UM

Hi experts,
When running the setup table for 2LIS_03_UM, we got the error message "Plant FP01 does not exist." Any suggestions on how we can fix this?
Thanks,
Donna

check if this plant has been maintained in source system or not. If not, ask the concerned team to maintain it.
Another way may be to allow error records which should ignore errornous records and rest should be filled in setup table.
Regards,
Gaurav

Similar Messages

  • Error while filling setup tables for 2lis_13_vahdr

    Dear friends,
    I am getting below Error while filling setup tables for 2lis_13_vahdr.
    More faulty documents found than the tolerated 0000000000
    Message no. M2222
    Can any one guide me how to address this issue.
    Thanks and Regards
    Nithya

    Hello Nithya,
    It seems the No of tolerated faulty documents that you have given is 0. So when you initialize try to these.
    While executing OLI*BW including a value in the maintain  "No. tolerated faulty documents" - 5000 or 10000.
    Then execute the program in background.
    Once the job is completed check the background job log if any errors.
    Thanks
    Chandran

  • Error while filling setup table for Sales

    Dear Team,
    We are getting following error while filling setup table for Sales (application component 11) and for Billing (application component 13),
    application component 11
    Error determining rate: foreign curr.  local curr. INR date 08.10.2007 (doc. 673624) (JOB - RMCVNEUA)
    Message No M2810
    application component 13
    Billing document 480050000: error determining stats. currency rate (no updating)
    More faulty documents found than the tolerated 0000000000 (JOB - RMCVNEUF)
    I have seen lot of threads based on this but all r showing diffrenent currency to INR but for the above mentioned documents currency is in INR only so why it is showing the error I am not able to determine.
    If anybody faced this problem kindly reply to this.
    Best Regards,
    SG

    Hi There,
    Might be your using a wrong document number.
    I mean if your using the 11 you should use only Sales document number and for 13 you should only use billing document number.
    If you use vice versa that error will throw.
    Regards,
    MQ

  • Problems with filling of Setup table for 2LIS_03_UM

    I am not able to fill up this table. I mean its not getting filled thorugh TCode OLIZBW.
    Setup table for 2LIS_03_BF is getting filled up though.
    Can anyone foresee what can be the reason.
    Thanks PB

    Nope I am not. But the problem I have posted in my last note that i was getting -ve stock values which was resolved when i loaded the data with infosource 2LIS_03_UM in development. when I am testing it in QA I am not getting dat in this extractor.
    I had a chat with MM Functional Consultant , he said I probably wont get this data.
    Now I am not sure how will I be able to resolve the problem.
    Regards
    PB

  • Error while filling setup table for 2LIS_03_BF

    Hello,
    I am getting an error while filling set-up table for 2LIS_03_BF.
    Following is the screenshot of the same.
    If I check in ST22, I get following,
    I could fill the setup table for other datasource 2LIS_03_BX without any problem.
    Please suggest.

    Hi,
    Can you try filling the setup table data for that range in background?
    Sometimes because of huge data that you are trying to fill it might through you a dump. So please execute it in background and see if it works?.
    But still can't really say what that dump tells from what you attached.
    Thanks,
    Sathya

  • Filling setup tables for 2lis_03_um

    hi
    i am trying to fill setup tables for um. its nott allowing me, i gave name of run and date and time .
    its asking Archiving Run  . i am trying to give or f4 its not allowing me?
    please let me know

    Hi Suneel........
    Check this thread by Roberto Negro......
    Archive run.
    Hope this helps.....
    Regards,
    Debjani.....

  • Error when filling setup table

    Hi!
    I'm trying to fill the set-up table in R3 for SD Billing Documents.
    SBIW (Display IMG (Settings for App Specific Datasources --> Logistics --> Managing Extract Structures --> Initialization --> Filling in the Setup Table --> App. specific setup of statistical data)..
    When running the program i get this error msg:
    "More faulty documents found than the tolerated 0000000000"
    The result is that the program stops. Some of the data is coming into the set up tables, but this seems to be inconsistent.
    Anybody know what I could do?
    BR
    Bjørn

    Thanks a lot..
    How can I find the log of dumped jobs?
    BR
    BJørn

  • Strange error while filling setup tables for purchasing

    hi experts,
    while filling setup tables, job is getting cancelled. when I check in sm37 message is
    Enter rate GBP / SGD rate type M for 03.08.2009 in the system settings
    Job cancelled after system exception ERROR_MESSAGE
    It is for only the 8th month of 2009. If I run for other dates it is succesfull.
    I am not able to understand what it mean. 
    Pls guide me how to resolve this.
    regards,
    rajesh.

    hi
    according to sven check this link
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/dc43c445-0d01-0010-23a1-ca348ff5f975?QuickLink=index&overridelayout=true
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0d5bf96-b19b-2c10-e3b6-e2f12a3de99a?QuickLink=index&overridelayout=true
    EUR Conversion to USD
    may help you.

  • Error while filling setup table for Quality Mangement D/Sources

    HI Experts,
    Iam trying to fill the QM setup tables.
    Steps iam following are
    1.T-code OLIQBW
    2.Selecting Event QV, QE and gave selection parameters and name for Run.
    3. Execute
    4.Run Time Error CALL_FUNCTION_PARM_UNKNOWN
       Exception  CX_SY_DYN_CALL_PARAM_NOT_FOUND
       Date and Time          27.08.2009 11:21:01                                                                               
    Function parameter "I_ADDITIONAL_DATA" is unknown.

    Hi Mansi,
    Runtime Errors         CALL_FUNCTION_PARM_UNKNOWN                                                 
    Exceptn                CX_SY_DYN_CALL_PARAM_NOT_FOUND                                             
    Date and Time          27.08.2009 11:56:20                                                                               
    ShrtText                                                                               
    Function parameter "I_ADDITIONAL_DATA" is unknown.                                                                               
    What happened?                                                                               
    Error in ABAP application program.                                                                               
    The current ABAP program "SAPLQMER" had to be terminated because one of the                  
         statements could not be executed.                                                                               
    This is probably due to an error in the ABAP program.                                                                               
    Function module "QEEA_COMBINE_TO_ONE_FEATURE" was called                                     
         with the parameter "I_ADDITIONAL_DATA".                                                      
         This parameter is not defined.                                                                               
    Error analysis                                                                               
    An exception occurred. This exception is dealt with in more detail below                     
         . The exception, which is assigned to the class                                              
          'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was neither                                               
         caught nor passed along using a RAISING clause, in the procedure                             
          "QMER_EXTRACTION_RD_RESULTS" "(FUNCTION)"                                                   
    Since the caller of the procedure could not have expected this exception                     
          to occur, the running program was terminated.                                               
         The reason for the exception is:                                                             
         The reason for the exception is:                                                       
         Function module "QEEA_COMBINE_TO_ONE_FEATURE" was called                               
         with the parameter "I_ADDITIONAL_DATA".                                                
         This parameter is not defined.                                                                               
    Missing RAISING Clause in Interface                                                        
         Program                                 SAPLQMER                                       
         Include                                 LQMER$01                                       
         Row                                     5                                              
         Module type                             (FUNCTION)                                     
         Module Name                             QMER_EXTRACTION_RD_RESULTS                                                                               
    Trigger Location of Exception                                                              
         Program                                 SAPLQMER                                       
         Include                                 LQMERU01                                       
         Row                                     488                                            
         Module type                             (FUNCTION)                                     
         Module Name                             QMER_EXTRACTION_RD_RESULTS

  • Short dump error while filling setup tables for 2LIS_06_INV

    Hi All,
    I am trying to fill the setup table.While filling the stup table for 2lis_06_inv datasource, i got the Dump error after some time.
    Error
    Runtime Errors         DBIF_RSQL_SQL_ERROR
    Exception              CX_SY_OPEN_SQL_DB
    Short text
        SQL error in the database when accessing a table.
    plz can anyone help me out...

    Dear friends,
    I tried it by giving the selection on fiscal year,but again same problem.If i give 1 0r 2 document numbers in selection then extractor works fine.
    error:in detail.
    Runtime Errors         DBIF_RSQL_SQL_ERROR
    Exception              CX_SY_OPEN_SQL_DB
    Short text
        SQL error in the database when accessing a table.
    Information on where terminated
        Termination occurred in the ABAP program "SAPLMRMBW" - in "BW_RETRIEVE_DB_CO".
        The main program was "RMCENEUR ".
        In the source code you have the termination point in line 827
        of the (Include) program "LMRMBWF01".
        The program "SAPLMRMBW" was started as a background job.
        Job Name....... "RMCENEUR"
        Job Number..... 10524100
        The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
        procedure "BW_RETRIEVE_DB_CO" "(FORM)", but it was neither handled locally nor
         declared
        in the RAISING clause of its signature.
        The procedure is in program "SAPLMRMBW "; its source code begins in line
        806 of the (Include program "LMRMBWF01 ".
      806 FORM bw_retrieve_db_co  USING    t_mcrbkey_bv    TYPE mcrbkey_t
      807                                  t_mcrbkey_nbv   TYPE mcrbkey_t
      808                                  t_ekbe_acc      TYPE t_ekbe
      809                         CHANGING t_mcrbco        TYPE mcrbco_t.
      810
      811   TYPES: BEGIN OF s_target.
      812   TYPES: table_left LIKE rbco.
      813   TYPES: table_right TYPE rbex.
      814   TYPES: END OF s_target.
      815   TYPES: t_target TYPE TABLE OF s_target.
      816
      817
      818   DATA: t_rbco_nbv  TYPE t_target,
      819         t_rbco_bv   TYPE t_target,
      820         s_rbco      TYPE s_target,
      821         s_ekbe      LIKE ekbe,
      822         s_mcrbco    TYPE mcrbco,
      823         l_index     LIKE sy-tabix.
      824
       825 * Data source: invoice item non-background
      826   IF NOT t_mcrbkey_nbv[] IS INITIAL.
    *>>>>>     SELECT * FROM  rbco AS r LEFT OUTER JOIN rbex AS i*
      828        ON   ( rmandt = imandt AND
      829               rbelnr = ibelnr AND
      830               rbuzei = ibuzei AND
      831               rcobl_nr = icobl_nr )
      832        INTO TABLE t_rbco_nbv
      833        FOR ALL ENTRIES IN t_mcrbkey_nbv
      834        WHERE r~gjahr = t_mcrbkey_nbv-gjahr AND
      835              r~belnr = t_mcrbkey_nbv-belnr.
      836   ENDIF.
      837 * Data source: invoice item background
      838   IF NOT t_mcrbkey_bv[] IS INITIAL.
      839     SELECT * FROM  rbco AS r LEFT OUTER JOIN rbex AS i
      840        ON   ( rmandt = imandt AND
      841               rbelnr = ibelnr AND
      842               rbuzei = ibuzei AND
      843               rcobl_nr = icobl_nr )
      844        INTO  TABLE t_rbco_bv
      845        FOR ALL ENTRIES IN t_mcrbkey_bv
      846        WHERE r~gjahr = t_mcrbkey_bv-gjahr AND
    Thnks in advance

  • How to stop document posting when filling setup tables for logistic app.

    Hello Boys
    I've read several threads and weblogs about data extraction from logistic applications i.e the ones which uses the infosources like 2lis_13_vditm, 2lis_02, 2lis_03, etc, etc,and now almost every thing is clear to me but one thing: how do i actually "close the system" while the process of filling setup tables i.e MC03BF0SETUP, MC03BX0SETUP, MC13VD0ITMSETUP,  are running?
    So I have some questions
    1) which is the procedure to prevent users from posting documents for an specific logistic applications (02,03, etc.) in a source system
    3) For example when using TC OLI9BW for statistical setup from billing documents (app no. 13), there is a check box "Block all billing documents?". Is this option for such pourpose?
    4) Every logistic applications has a different procedure??
    thanks (with points of course) for any help
    rgds
    A. Garduñ

    Hi Azael:
    Q1: usually the BW team will inform basis/secuity about the deletion and performing of setup tables. they will fix a time after the normal hours where in all users are locked out from the system. in a sense, R/3 will be down for that time.
    2. the check box which says, "block documents" is meant to block posting. for eg: you are doing setup tables late in the evening, and you assume that no user is assessing the system, but if there is a user(just by chance) who is doing some posting and when he try to save it, the system will not allow him to do save as you cheked this option.(normally we donot use this)
    3. some LO may have different procedures, for eg IM. but most of them have the same functionality.
    hope it helps.
    assign points if helpful
    kalyan

  • Error when running setup: Attach to native process

    Hi,
    I try to install the oracle iplanet webserver (version 7.0.13) on linux (centos 6.2, 64 bits).
    I first installed the compat-libstdc++-33 packages.
    After that I installed JRE, this version:
    java version "1.6.0_31"
    Java(TM) SE Runtime Environment (build 1.6.0_31-b04)
    Java HotSpot(TM) 64-Bit Server VM (build 20.6-b01, mixed mode)
    To install the iplanet webserver I first extract the content of the downloaded file (Oracle-iPlanet-Web-Server-7.0.13-linux-x64).
    Then I try to run setup with the command ./setup
    The error I get is: attach to native process failed.
    Any idea what is wrong?
    Regards Stefan
    Thanks for the help.

    Stefan,
    I am seeing the same error on Ubuntu 12.04 Precise Pangolin (which is admittedly unsupported). This happened to me once before on an older version of Ubuntu, and as I recall, it was a missing library dependency, but I am not able to locate the fix I came up with at that time.
    Interestingly, my existing ws7u12 installation runs fine, I just cannot upgrade to the latest update (15).
    I have this software under support, but only on Solaris (I develop on Ubuntu, but deploy to my production Solaris server). In any case, as Ubuntu is not officially supported, opening an SR for this problem would be a waste of time.
    I'll continue digging for my old solution and post here if I find it. If you've since discovered the solution, I'd love to hear it.
    Thanks,
    Bill

  • Error when download contion table for MWST

    Hi,
    I create a new sequence acess to MWST pricing condition.
    I folow all the correct steps to do this.
    But when i download the table with the condition values (ZDNL_COND_A935) the fllowing errors occurs:
    Error when converting field contents from field TAXK1 and content 1
    Message no. CND_MAP326
    Error in conversion of field contents, KNUMH 0003850082 not converted
    Message no. CND_MAP303
    Can anyone give me some help?
    Thanks in advance.
    Best regards,
    Alexandre Aires

    hi,
    Can you review the SAP note 531191& 746278.
    so it seems there is definitely something wrong with the
    tax classifications. Can you repeat the load of dnl_cust_tax and
    dnl_cust_cndall to regenerate the table and afterwards start the
    load of the condition table.
    Regards,
    Murali

  • Error when run "write table to xl.vi"

    When I run the labview sample "write table to xl.vi", an error, "Old format or invalid type library.
    in Open New WorkBook.vi->Write Table to XL.vi", appeared in the invoke node of workbooks.
    I use Labview 6i and office xp in Windows XP. What drive softwares should I install for solving the problem? Thanks!

    Here try this.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
    Attachments:
    XL.llb ‏150 KB

  • Error while running setup.exe for oracle installation on windows 2003

    Hi,
    I am trying to install oracle 9.2.0.1 on my windows 2003 machine and when i click on setup.exe nothing happens. when i tried to run it thru command prompt again nothing happens when i check in computer management => event views it throws following error.
    The application, C:\DOCUME~1\barb\Local Settings\Temp\1\OraInstall2006-08-11_05-19-46AM\jre\bin\javaw.exe, generated an application error The error occurred on 08/11/2006 @ 05:19:56.356 The exception generated was c0000005 at address 6D4CF9A0 (jvm!JVM_TraceMethodCalls)
    can anybody suggest me what could be the problem or i will have to install jvm first and then try installing oracle?
    thanks
    Chandan

    did you check the installation guide and Preinstallation Requirements?
    http://download-west.oracle.com/docs/cd/B19306_01/install.102/b14316/reqs.htm#i1011417

Maybe you are looking for