Error when running the apxldimg.sql to update the images direct from rel3.0

Hi everyone,
I'm new to APEX. I'm upgrading from v3.0 to v3.1. I'm on the post-installation, section on "Updating the Images Directory When Upgrading from Release 3.0", I ran into error below when running the apxldimg.sql script. Has anyone run into the is error before. If yes, how did you fix it?
Directory created.
filelist_xml xmltype := xmltype(bfilename(upload_directory_name,file_list),nls_charset_id('AL32UTF8'));
ERROR at line 15:
ORA-06550: line 15, column 36:
PLS-00306: wrong number or types of arguments in call to 'XMLTYPE'
ORA-06550: line 15, column 25:
PL/SQL: Item ignored
ORA-06550: line 38, column 15:
PLS-00302: component 'EXISTSRESOURCE' must be declared
ORA-06550: line 38, column 3:
PL/SQL: Statement ignored
ORA-06550: line 52, column 46:
PLS-00320: the declaration of the type of this expression is incomplete or
malformed
ORA-06550: line 52, column 3:
PL/SQL: Statement ignored

My team member found another post that ran into the same problem and the section is for 11g only. My db is 9.2.0.5.

Similar Messages

Error when running "regsvr32 schmmgmt.dll" to add the Schema Management Snap In on Windows 8

I am running Windows 8 Enterprise and trying to install the Active Directory Schema Management MMC Snap In.
When I follow the procedure listed via the link below, it doesn't work, I get an error.
http://technet.microsoft.com/en-us/library/cc732110.aspx
The error message that I get is shown below.
I did a search and found schmmgmt.dll in the "C:\Windows\System32" folder, but if I do a "C:\> regsvr32 C:\Windows\System32\schmmgmt.dll", I still get the same error.
Any ideas how I can register this .dll so that I can use the Active Directory Schema Management Snap In in Windows 8 Enterprise?
I do not have this problem on Windows 7 or Windows XP, so I am thinking this must be a "Windows 8" thing.
I have a support case open with Microsoft Premier Support and will post the resolution when I get it, but in the interest of saving time, if anyone already dealt with this and has a quick fix, I'd be happy to take a look at it.

Hi,
I have not found the files in my computer. Can you please double check that.
Juke Chou
TechNet Community Support

Windows installer package not running or installing properly error when i try to install and update to the new icloud control panel.

i get a windows installer package not running or installing properly error when i try to install and update to the new icloud control panel.

Okay ... so it's not one of the cases of bodged up ACLs on the Apple folder in Common Files. (That's been underlying a few of the recalcitrant E7W5s.
Just in case, let's try the fixit from the following document:
Fix problems with programs that can't be installed or uninstalled

ORA-06502 - Error when running "Ask The Expert 0.9"

Hi ,
I successfully installed "Ask the Expert" package with Apex 3.0 on Oracle 10g Database 10.2.0.1.0. No error ocurred during the import in my Apex environment.
Besides that, i'm having problems when i tried to run the "Aks the Expert". It always shows the following message errors:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
Error Unable to write activity log.
I think it was a problem with APEX instalation, but i could run the Sample Application of Apex without any problem.
I opened an SR in Metalink, but to my surprise, the analist of support don't know what's wrong with the demo "Ask de Expert".
The debug function of the application show the following commands before the error ocurrs:
0.01:
0.01: S H O W: application="103" page="1" workspace="" request="" session="6648566035252817"
0.01: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: NLS: CSV charset=WE8MSWIN1252
0.01: ...NLS: Set Decimal separator="."
0.01: ...NLS: Set NLS Group separator=","
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: ...Setting session time_zone to -03:00
0.02: NLS: Language=en-us
0.02: Application 103, Authentication: CUSTOM2, Page Template: 667896385843019243
0.02: ...Determine if user "N3COUTINHO" workspace "951808960237899" can develop application "103" in workspace "951808960237899"
0.02: ...ok to reuse builder session for user:nobody
0.03: ...Application session: 6648566035252817, user=nobody
0.03: ...Determine if user "N3COUTINHO" workspace "951808960237899" can develop application "103" in workspace "951808960237899"
0.03: Session: Fetch session header information
0.03: ...Metadata: Fetch page attributes for application 103, page 1
0.03: Fetch session state from database
0.03: Branch point: BEFORE_HEADER
0.03: Fetch application meta data
0.04: Computation point: BEFORE_HEADER
0.04: ...Perform computation of item: P1_CLEAN_CRITERIA, type=FUNCTION_BODY
0.04: ...Performing function body computation
0.06: ...Session State: Save "P1_CLEAN_CRITERIA" - saving same value: ""
0.06: Processing point: BEFORE_HEADER
0.06: ...Process "Read and Write Activity Cookie": PLSQL (BEFORE_HEADER) declare l_cookie_id number; begin owa_util.mime_header('text/html', FALSE); -- ate_api.read_activity_cookie; l_cookie_id := ate_api.fetch_activity_cookie_val( 'COOKIE_ID' ); -- if l_cookie_id is null then l_cookie_id :=
Content-type: text/html; charset=ISO-8859-1 Set-Cookie: activity_ask_expert=1|2400346189796; expires=Wed, 01-Jan-2020 08:00:00 GMT; path=/;
0.06: Encountered unhandled exception in process type PLSQL
0.06: Show ERROR page...
0.06: Performing rollback...
Please, could any one help me to solve this problem ? Metalink couldn't help me diagnosing what's wrong.
Thanks,
Sergio Coutinho

Hi,
I don´t know if it help the analisis, but i collect some informations about my environment:
1) HTML DB version
3.0.1
2) Database version
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
3) Database server operating system (as well, if 32-bit or 64-bit)
Solaris 5.9 - 64 bits
4) Database Parameters:
PARAMETER VALUE
NLS_CALENDAR GREGORIAN
NLS_CHARACTERSET WE8ISO8859P1
NLS_COMP BINARY
NLS_CURRENCY $
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_DUAL_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_LANGUAGE AMERICAN
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_NCHAR_CONV_EXCP FALSE
NLS_NUMERIC_CHARACTERS .,
NLS_RDBMS_VERSION 10.2.0.1.0
NLS_SORT BINARY
NLS_TERRITORY AMERICA
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_TIME_FORMAT HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
Could it explain why ASK THE EXPERT is running on hosted apex site and it´s
generating error when running in my environment?
Thanks for the help !
Sergio

SQL serever 2012 Setup has encountered an error when running a windows installer file

I am trying to install SQL server 2012 Express on a windows 7 PC for 2 days now. I feel like banging my head against the wall.
I keep getting the following errors here's the full log
The following error has occurred:
SQL Server Setup has encountered an error when running a Windows Installer file.
Windows Installer error message: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'. Please refer
to Help and Support for more information. HRESULT: 0x8007054F. Windows Installer file: C:\Users\Receno\AppData\Local\Temp\SQL Server 2012\Setup\1033_ENU_LP\x64\setup\sqlsupport_msi\SqlSupport.msi Windows Installer log file: C:\Program Files\Microsoft SQL Server\110\Setup
Bootstrap\Log\20150109_213740\SqlSupport_Cpu64_1_ComponentUpdate_1.log
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDC80C325

hmmm..so which hotfix do I apply ?
SQL Server 2012
All (Global) x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global) x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global) x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global) x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global)
x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
<input id="chk471373" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
<input id="chk471368" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
<input id="chk471370" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
<input id="chk471371" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
<input id="chk471374" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
<input id="chk471372" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
<input id="chk471369" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
<input id="chk471367" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global)
x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
<input id="chk471373" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
<input id="chk471368" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
<input id="chk471370" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
<input id="chk471371" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
<input id="chk471374" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
<input id="chk471372" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
<input id="chk471369" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
<input id="chk471367" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global)
x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
<input id="chk471373" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
<input id="chk471368" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
<input id="chk471370" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
<input id="chk471371" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
<input id="chk471374" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
<input id="chk471372" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
<input id="chk471369" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
<input id="chk471367" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86

Getting the MDX query select error when running a webi report on BI query

Getting the following error when running a webi report on BI query :
A database error occured. The database error text is: The MDX query SELECT { [Measures].[D8JBFK099LLUVNLO7JY49FJKU] } ON COLUMNS , NON EMPTY [ZCOMPCODE].[LEVEL01].MEMBERS ON ROWS FROM [ZTEST_CUB/REP_20100723200521] failed to execute with the error Unknown error. (WIS 10901).
I have gone through many threads related to this error. But not able find the steps to follow for resoultion.
Please help in this regard.
Thanks,
Jeethender

The Fix Pack is also for Client Tools--it is a separate download. Please see the text below for ADAPT01255422
ADAPT01255422
Description:
Web Intelligence generates an incorrect MDX statement when a characteristic and a prompt are used.
The following database error happens: "The MDX query ... failed to execute with the error
Unknown error (WIS 10901)."
New Behavior:
This problem is resolved.
This information is also available in the Fixed Issues document for any Fix Pack greater than 2.2.

Getting the below error when running the Baseline.grf for the first time

I am getting the below error when running the Baseline.grf for the first time.
Appreciate your support in resolving it.
Error below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Baseline.grf
INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Baseline)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
INFO [RUN_GRAPH1_0] - Checking graph configuration...
INFO [RUN_GRAPH1_0] - Graph configuration is valid.
INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
java.lang.NullPointerException
     at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
     at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
     at org.jetel.graph.Phase.free(Phase.java:487)
     at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
     at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
     at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
     at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
     at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
     at org.jetel.component.RunGraph.execute(RunGraph.java:302)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
ERROR [WatchDog] - Node RUN_GRAPH1 error details:
org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
     at org.jetel.component.RunGraph.execute(RunGraph.java:324)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 2 20132
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !

It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
#echo $CLOVER_LIB/*
for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
     LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
done;
#for i in `ls $CLOVER_LIB/*.jar`; do
#echo $i
#done;
You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
HTH,
Dan
http://branchbird.com

Error when running the ant task

Hi,
I got an error when running the ant from jdeveloper .I was running the to build my J2EE module which is build in Java 1.4 . I have changed my java home to JDK 1.4 and then run the ant build i got the following error .The class and ejbc compilation is completing nicely but the error is happening at jar creation .Please help me . One more thing ,when i run the ant task from the command prompt ,it is working fine .
AuditSearchVO), audit(com.ibsplc.iRes.audit.vo.BaseAuditVO)] >
[java] java.io.IOException: CreateProcess: javac -nowarn -classpath D:\applns\bea\jdk142_08\jre\lib\rt.jar;D:\applns\bea\jdk142_08\jre\lib\i18n.jar;D:\applns\bea\jdk142_08\jre\lib\sunrsasign.jar;D:\applns\bea\jdk142_08\jre\lib\jsse.jar;D:\applns\bea\jdk142_08\jre\lib\jce.jar;D:\applns\bea\jdk142_08\jre\lib\charsets.jar;D:\applns\bea\jdk142_08\jre\classes;D:\Project\Development\aiRES1.7\classes;D:\Project\Development\aiRES1.7\ibase.jar;D:\applns\bea\weblogic81\server\lib\weblogic.jar;D:\applns\bea\weblogic81\server\lib\wlcipher.jar;D:\applns\bea\weblogic81\server\lib\jsafeFIPS.jar;D:\applns\bea\weblogic81\server\lib\webservices.jar;D:\applns\bea\weblogic81\server\lib\xmlx.jar;D:\applns\bea\weblogic81\server\lib\jconn2.jar;D:\applns\bea\weblogic81\server\lib\jConnect.jar;D:\applns\bea\weblogic81\server\lib\EccpressoAsn1.jar;D:\applns\bea\weblogic81\server\lib\EccpressoCore.jar;D:\applns\bea\weblogic81\server\lib\EccpressoJcae.jar;D:\applns\bea\weblogic81\server\lib\ant\ant.jar;D:\applns\bea\weblogic81\server\lib\ant\optional.jar;D:\applns”
[java]      at java.lang.Win32Process.create(Native Method)
[java]      at java.lang.Win32Process.<init>(Win32Process.java:66)
[java]      at java.lang.Runtime.execInternal(Native Method)
[java]      at java.lang.Runtime.exec(Runtime.java:566)
[java]      at java.lang.Runtime.exec(Runtime.java:491)
[java]      at java.lang.Runtime.exec(Runtime.java:457)
[java]      at weblogic.utils.Executable.exec(Executable.java:227)
[java]      at weblogic.utils.Executable.exec(Executable.java:156)
[java]      at weblogic.utils.Executable.exec(Executable.java:142)
[java]      at weblogic.utils.compiler.CompilerInvoker.execCompiler(CompilerInvoker.java:249)
[java]      at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.java:428)
[java]      at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:328)
[java]      at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:336)
[java]      at weblogic.ejb20.ejbc.EJBCompiler.doCompile(EJBCompiler.java:270)
[java]      at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:476)
[java]      at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:397)
[java]      at weblogic.ejbc20.runBody(ejbc20.java:517)
[java]      at weblogic.utils.compiler.T

Hi,
I got an error when running the ant from jdeveloper .I was running the to build my J2EE module which is build in Java 1.4 . I have changed my java home to JDK 1.4 and then run the ant build i got the following error .The class and ejbc compilation is completing nicely but the error is happening at jar creation .Please help me . One more thing ,when i run the ant task from the command prompt ,it is working fine .
AuditSearchVO), audit(com.ibsplc.iRes.audit.vo.BaseAuditVO)] >
[java] java.io.IOException: CreateProcess: javac -nowarn -classpath D:\applns\bea\jdk142_08\jre\lib\rt.jar;D:\applns\bea\jdk142_08\jre\lib\i18n.jar;D:\applns\bea\jdk142_08\jre\lib\sunrsasign.jar;D:\applns\bea\jdk142_08\jre\lib\jsse.jar;D:\applns\bea\jdk142_08\jre\lib\jce.jar;D:\applns\bea\jdk142_08\jre\lib\charsets.jar;D:\applns\bea\jdk142_08\jre\classes;D:\Project\Development\aiRES1.7\classes;D:\Project\Development\aiRES1.7\ibase.jar;D:\applns\bea\weblogic81\server\lib\weblogic.jar;D:\applns\bea\weblogic81\server\lib\wlcipher.jar;D:\applns\bea\weblogic81\server\lib\jsafeFIPS.jar;D:\applns\bea\weblogic81\server\lib\webservices.jar;D:\applns\bea\weblogic81\server\lib\xmlx.jar;D:\applns\bea\weblogic81\server\lib\jconn2.jar;D:\applns\bea\weblogic81\server\lib\jConnect.jar;D:\applns\bea\weblogic81\server\lib\EccpressoAsn1.jar;D:\applns\bea\weblogic81\server\lib\EccpressoCore.jar;D:\applns\bea\weblogic81\server\lib\EccpressoJcae.jar;D:\applns\bea\weblogic81\server\lib\ant\ant.jar;D:\applns\bea\weblogic81\server\lib\ant\optional.jar;D:\applns”
[java]      at java.lang.Win32Process.create(Native Method)
[java]      at java.lang.Win32Process.<init>(Win32Process.java:66)
[java]      at java.lang.Runtime.execInternal(Native Method)
[java]      at java.lang.Runtime.exec(Runtime.java:566)
[java]      at java.lang.Runtime.exec(Runtime.java:491)
[java]      at java.lang.Runtime.exec(Runtime.java:457)
[java]      at weblogic.utils.Executable.exec(Executable.java:227)
[java]      at weblogic.utils.Executable.exec(Executable.java:156)
[java]      at weblogic.utils.Executable.exec(Executable.java:142)
[java]      at weblogic.utils.compiler.CompilerInvoker.execCompiler(CompilerInvoker.java:249)
[java]      at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.java:428)
[java]      at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:328)
[java]      at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:336)
[java]      at weblogic.ejb20.ejbc.EJBCompiler.doCompile(EJBCompiler.java:270)
[java]      at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:476)
[java]      at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:397)
[java]      at weblogic.ejbc20.runBody(ejbc20.java:517)
[java]      at weblogic.utils.compiler.T

I keep getting the same error when connecting to itune for either update or download. error is we could not complete your itunes store request error 0x800B0101

I keep getting the same error when connecting to itune for either update or download. error is we could not complete your itunes store request error 0x800B0101.
My OS is Windows Vista and using Internet Explorer

I keep getting the same error when connecting to itune for either update or download. error is we could not complete your itunes store request error 0x800B0101.
My OS is Windows Vista and using Internet Explorer

HT5568 when trying to down load an update the following message occurred The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)" What can I do?

When I tried to download an update, the following message occurred "The operation couldn’t be completed. (NSURLErrorDomain error -3001.)(102)". What is this? How can I complete the update?

“Not Found
The requested URL /content/downloads/53/02/041-8081/2jwp4wjrwygtm4lc608qy4h0 n4a9yyq37g/Safari6.0.2Mountain.pkg was not found on this server.“

Downloaded newest iphone 4 software when download was complete i tried updating the phone and an error came up and has completly wiped my phone and the screen is blank. what do i do?

Downloaded newest iphone 4 software when download was complete i tried updating the phone and an error came up phone wont update and has gone completly blank. what do i do?

the error message is (-1)

I have compiled a program for a target after I added a new vi from NI_AALPro.lvlib. The addition worked fine on my development computer but gave me errors when run on the target.

I have compiled a program for a target after I added a new vi from NI_AALPro.lvlib. The addition worked fine on my development computer but gave me errors when run on the target.
The box displayed:
Missing subVI NI_AALBase.lvlib:1D Linear Evaluation.vi in VI NI_PtbyPt.lvlib:Linear Fit PtbyPt.vi
Missing subVI NI_AALPro.lvlib:MSE.vi in VI NIPtbtPt.lvlib:Linear Fit PtbyPt.vi
What do I need to do to bring the correct library into the transportable code?

Hello,
I was unable to reproduce the behavior that you saw. I was able to deploy my application with the Linear Fit PtByPt without issues.
Could you attach the smallest piece of code that reproduces this behavior so that I can test it as well?
Justin Parker
National Instruments
Product Support Engineer

The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
Cheers

Hi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

Error when running a report in BPC NW

I am getting the following error when running a report for my application in BPC NW.
EVDRE encountered an error retrieving data from the Web Server (retrying in (X) seconds).
This error comes with this dialog option box to either continue or cancel retrying retrieving data. Retrying doesn't help either.
Any report I run (on any of my appsets), I get this error. I used the EVDRE function and also tried running a report using the template as the basis. But I get the error either way.
Does anyone know why this error is occurs or how to debug this issue. I saw some information about this in earlier threads but could not make much out of it.
Appreciate any assistance.

Sanjay,
This is a very generic error...Couple of places to look for....
1)Reprocess the application (Modify application + Reassign SQL Index + Process Application)
2)optimizing the application sometimes helps (Full Optimize + Compress Database + Index defragmentation).
3)Create a "evdataserver_debug.txt" in user's private publication folder on server side to populate very detail level logging and check the log on client side EVDRE_LOG.txt for further peek into where things are getting messed up.
if evdataserver_debug.txt does not get populated on BPC 5.x...it is an issue with IIS authetication on Application server.
4)You have to check the event viewer into .NET server and also the BPC logs which can be found into
BPC\Logging for further details ..
Hope this helps..
Edited by: Vishal Mahawadhi on Jun 24, 2009 9:50 AM

Getting an Error When Running Server 2012 R2 adprep /forest prep on a 2012 DC

I am getting an error when running adprep /forest prep on a Server 2012 domain controller. The main parts of my domain are as follows:
2 - Domain Controllers running Server 2012
1 - Exchange Server 2013 running on Server 2012
I am trying to either do an in-place upgrade to my domain controllers to Server 2012 R2 or even introduce a Server 2012 R2 domain controller into the domain. The error I am getting is as follows:
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_search_s() finished, return code is 0x20
[2014/04/05:09:12:38.873]
Adprep verified the state of operation cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_modify_s(). The entry to modify is CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_modify_s() finished, return code is 0x13
[2014/04/05:09:12:38.905]
Adprep was unable to modify some attributes on object CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[User Action]
Check the log file ADPrep.log in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
[2014/04/05:09:12:38.936]
Adprep encountered an LDAP error.
Error code: 0x13. Server extended error code: 0x20b1, Server error message: 000020B1: AtrErr: DSID-030F112A, #1:
0: 000020B1: DSID-030F112A, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 9086f (msDS-ClaimIsValueSpaceRestricted)
DSID Info:
DSID: 0x181112dd
ldap error = 0x13
NT BUILD: 9600
NT BUILD: 16384
[2014/04/05:09:12:38.967]
Adprep was unable to update forest information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
[User Action]
Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
Any Help would be appreciated. Thanks!

Hi,
did you check which servers has FSMO roles?
You can do that via command prompt: netdom query fsmo
For forestprep you must do that on DC which have Schema Operations marter role.
Command
Domain controller
Number of times to run the command
adprep /forestprep
Must be run on the schema operations master for the forest.
Once for the entire forest
adprep /domainprep
Must be run on the infrastructure operations master for the domain.
Once in each domain where you plan to install an additional domain controller that runs a later version of Windows Server than the latest version that is running in the domain.
Note
Domains where you will not add a new domain controller will be affected by adprep /forestprep, but they do not require you to run adprep /domainprep.
http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx

Error when running the apxldimg.sql to update the images direct from rel3.0

Similar Messages

Maybe you are looking for