Error when running time evaluation

Hi,
When I am running time evaluation I got this error "start of pair formation changed from 20040101 to 20081212"
I am using TM01 schema. Please help me out with this error.
Thank you
Shravan

Hi Shravan,
Please check infotype 0007 if the work schedule has changed fron 01/01/2004.
Also please check the generated workschedule used for that employee , if the config has changed and that work schedule has been re- generated with a different DWS.
Thanks.

Similar Messages

No entry in table T001P for key when running time evaluation

Hi There,
All the master data is in synch and I am getting this error when
running time evaluation.
*No entry in table T001P for key
Person rejected: xxxxxxxx*
Apparantly this seems to be config error but we have lot of EEs like this, working okay. All the master data dates are correct.
Any comment/help is greatly appreciated.
Thanks,
Gajanan

Hi,
In one of the thread i have read that, after maintaining Contract Type the issue has been resolved.
and in other thread he says
"the issue is caused by a mismatch in the employee's master data dates. Particularly with infotype 8, the first record of his basic pay had a date prior to his hire date"
Can you please check it once.
Good Luck..!
KK

No entry in table T001P when running time eval

Hi,
Can someone tell me, why this error occurs. "No entry in table T001P" when running time evaluation PT60. I checked his Infotype 1 and has the Personal Area/Subarea assigned.
Thanks,
Swarna.

Hi,
Please check these tables:
V_001P_ALL
V_503_AL
Or try creating a blank entry in table T001P.
Hope this helps,
Reward points if helpful,
Thank You,

8.2 error when running tsld

Im getting error when running time scale logic diagram
Primavera.Look.LoginFailureException: Exception of type 'Primavera.Look.LoginFailureException' was thrown.
at Primavera.Look.BootStrapper.Run(String xmlfile, String templatefile, LoginInfo loginInfo, String projIDs)
at P6Look.App.RunApplicationStartup()
at P6Look.App.Application_Startup(Object sender, StartupEventArgs e)

Hello
the cause of the error and the solution is described in the following document
Error: "Primavera.Look.LoginFailureException: Exception of type 'Primavera.Look.LoginFailureException'" Launching Timescale Logic Diagram Connecting To An Oracle Database (Doc ID 1491705.1)

Getting the below error when running the Baseline.grf for the first time

I am getting the below error when running the Baseline.grf for the first time.
Appreciate your support in resolving it.
Error below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Baseline.grf
INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Baseline)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
INFO [RUN_GRAPH1_0] - Checking graph configuration...
INFO [RUN_GRAPH1_0] - Graph configuration is valid.
INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
java.lang.NullPointerException
     at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
     at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
     at org.jetel.graph.Phase.free(Phase.java:487)
     at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
     at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
     at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
     at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
     at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
     at org.jetel.component.RunGraph.execute(RunGraph.java:302)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
ERROR [WatchDog] - Node RUN_GRAPH1 error details:
org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
     at org.jetel.component.RunGraph.execute(RunGraph.java:324)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 2 20132
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !

It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
#echo $CLOVER_LIB/*
for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
     LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
done;
#for i in `ls $CLOVER_LIB/*.jar`; do
#echo $i
#done;
You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
HTH,
Dan
http://branchbird.com

Getting an Error When Running Server 2012 R2 adprep /forest prep on a 2012 DC

I am getting an error when running adprep /forest prep on a Server 2012 domain controller. The main parts of my domain are as follows:
2 - Domain Controllers running Server 2012
1 - Exchange Server 2013 running on Server 2012
I am trying to either do an in-place upgrade to my domain controllers to Server 2012 R2 or even introduce a Server 2012 R2 domain controller into the domain. The error I am getting is as follows:
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_search_s() finished, return code is 0x20
[2014/04/05:09:12:38.873]
Adprep verified the state of operation cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_modify_s(). The entry to modify is CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_modify_s() finished, return code is 0x13
[2014/04/05:09:12:38.905]
Adprep was unable to modify some attributes on object CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[User Action]
Check the log file ADPrep.log in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
[2014/04/05:09:12:38.936]
Adprep encountered an LDAP error.
Error code: 0x13. Server extended error code: 0x20b1, Server error message: 000020B1: AtrErr: DSID-030F112A, #1:
0: 000020B1: DSID-030F112A, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 9086f (msDS-ClaimIsValueSpaceRestricted)
DSID Info:
DSID: 0x181112dd
ldap error = 0x13
NT BUILD: 9600
NT BUILD: 16384
[2014/04/05:09:12:38.967]
Adprep was unable to update forest information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
[User Action]
Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
Any Help would be appreciated. Thanks!

Hi,
did you check which servers has FSMO roles?
You can do that via command prompt: netdom query fsmo
For forestprep you must do that on DC which have Schema Operations marter role.
Command
Domain controller
Number of times to run the command
adprep /forestprep
Must be run on the schema operations master for the forest.
Once for the entire forest
adprep /domainprep
Must be run on the infrastructure operations master for the domain.
Once in each domain where you plan to install an additional domain controller that runs a later version of Windows Server than the latest version that is running in the domain.
Note
Domains where you will not add a new domain controller will be affected by adprep /forestprep, but they do not require you to run adprep /domainprep.
http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx

Error when running allocation logic

I am running the following allocation logic and get the following error:
*RUNALLOCATION
*FACTOR=USING/TOTAL
*DIM P_ACCT WHAT=CE0004010; WHERE=CE0004020; USING=CE0004030; TOTAL=<<<
*DIM ENTITY WHAT=A1000; WHERE=<<<; USING=<<<; TOTAL=<<<
*DIM TIME WHAT=2009.JAN; WHERE=>>>; USING=BAS(2009.TOTAL); TOTAL=<<<
*ENDALLOCATION
UJP_RULE_EXCEPTION:Missing [] on property name: WHAT=CE0004010. I get this error when executing the script using the program "UJK_SCRIPT_LOGIC_TESTER". I also get a similar error when running it via the data manager package.
Any thoughts on why this error is happening?

Hi Sanjay,
I think you are using formula property for any of the dimension member used in the Allocation logic.
FYI Allocation will not work fine for the dimension members which is calculated using the formula written in the formula Property.
There is no problem with your script it looks fine.
Hope this might help you.
Regards,
G.Vijaya Kumar

Loading script "script path-name" failed (0xC0000006) error when running scripts from DFS

We have this issue where any number of random scripts that execute at startup will produce the following error when run from DFS:
The status code for this error equates to STATUS_IN_PAGE_ERROR - The instruction at 0x%p referenced memory at 0x%p. The required data was not placed into memory because of an I/O error status of 0x%x.
This does not always happen each time and the script can be random. If we move the script(s) to a non DFS, we do not see this. I believe the issue is being caused by a minute disconnect to the DFS for whatever script is attempting to execute at that
moment. This happens across a few (consistent) offices on different computers.
Any ideas?

Hi,
According to your description, my understanding is that you run scripts in a shared folder which is added to a DFS Namespace, then the error prompt. However, you can run the scripts when you directly access the shared folder.
What scripts did you run? Is there any error message in the Event Log? If so, please provide us the detailed error message for our further research.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Clock In Clock Out Report without running Time Evaluation

Hi Every1
Is it possible to get report on clock in clock out without running time evaluation?? Can we get a report on Time events after uploading Punch in punch out from other system thru BDC?
Here requirement is as soon as punch in punch out is uploaded on daily basis thru BDC they shud get a report on Clock In from th system so that they can immediately find out in morning shift how many employees are present.
Thanks & Regards
Neha

Well what tables are you uploading in the BDC ?? are the PTX tables being uploaded or the PA2011 Tables uploaded ?
If the PA2011 Tables are uploaded then yes we can run a report for each day as required but if the PTX tables are updated then they are either waiting for managers approval or to be transfered to HR which triggers updation of the Infotypes accordingly.
And when you transfer to HR i guess Infotype 2011 is not updated but rather 2001 and 2002 Tables are updated but have to check on this, time eval schema would not update 2011 Infotype but rather would update ZL tables with time types if present, try to figure out what table the BDC updates each night.
Edited by: insane saint on Jul 14, 2009 10:38 PM

Win 7 automation error when running crystal 10 reports

I am getting automation and memory type errors when running crystal 10 reports through a VB6 application on WIN 7 32 bit PC...
does not happen on all win7 PCs, in fact, the reporting will work for a time and then errors, but once getting the errors, seems like the reports will not run again.

Honestly, not a clue. I've never even thought of putting CR 10 (designer or runtime) on WIN 7. Now I assume this is not CR 10.5 (bundles with .NET 2008).
See [this|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567] wiki.
Ludek

Getting error when running PRC: Transaction Import

Hi Folks
Am getting an error when running PRC: Transaction Import to transfer time entries from OTL to Projects.
Has anybody encountered this before?
"MSG-20002: ORA-20002: pre_import:ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "APPS.PA_TRX_IMPORT", line 7549"
If yes, please let me know the resolution.
Kind Regards
Srini.

Pl see if MOS Doc 117395.1 (Transaction Import Interface Troubleshooting Guide) can help
HTH
Srini

Error when running my adf application in Jdev 11

Hi i develop one application that work fine in mi laptop and other computers, but yesterday i load it in one computer that throw me error when running:
(oracle.jbo.JboException) JBO-29000: Unexpected exception caught: java.sql.SQLException, msg=ORA-01882: no se ha encontrado la región de la zona horaria
Didn´t find Time Zone..
I dont know what could be the problem in that computer.. some regedit configuration??

Hi Shay!
Already compare regional settings in both pc and are equals!..also try unistalling an reinstalling jdeveloper.. problem persist!

Jsp Error when running graph reports on 9ias server

i getting the following message error when running a graph jsp report on my company unix 9ias server:
org.omg.CORBA.OBJECT_NOT_EXIST: minor code: 0 completed: No
     at com.inprise.vbroker.ProtocolEngine.PortfolioImpl.getConnector(PortfolioImpl.java:79)
     at com.inprise.vbroker.ProtocolEngine.ManagerImpl.getConnector(ManagerImpl.java:147)
     at com.inprise.vbroker.orb.DelegateImpl._bind(DelegateImpl.java:196)
     at com.inprise.vbroker.orb.DelegateImpl.verifyConnection(DelegateImpl.java:365)
     at com.inprise.vbroker.orb.DelegateImpl.is_local(DelegateImpl.java:493)
     at org.omg.CORBA.portable.ObjectImpl._is_local(ObjectImpl.java:356)
     at oracle.reports.engine._EngineReportStub.doneReport(_EngineReportStub.java:36)
     at oracle.reports.definition.RWJspProxy.doneReport(RWJspProxy.java:261)
     at oracle.reports.definition.RWReport.done(RWReport.java:1087)
     at oracle.reports.jsp.ReportTag.release(ReportTag.java:398)
     at oracle.jsp.runtime.OracleJspRuntime.releaseTagHandler0(OracleJspRuntime.java:1109)
     at oracle.jsp.runtime.OracleJspRuntime.extraHandlePCFinally(OracleJspRuntime.java:1213)
     at afpdrep.crystal._flip._flip1._jspService(_flip1.java:687)
     [SRC:/afpdrep/crystal/flip/flip1.jsp]
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
     at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
Thanks for any help in advance.

Hi Simon,
Looking at the exception, it seems the machine is so slow that it could not give enough time for the report engines to start up can also result in this exception.
Please try the following :
Increase the callbacktimeout parameter for the report server. In server conf file that increase the callbacktimeout parameter for the report server from 1 minute (60000 milliseconds) to 3 minutes(180000 milliseconds)
Thanks,
Vinod.

Intermitten Errors when running reports in Crystal Report Viewer

Hi All,
We get intermittent errors when running the same crystal report over and over again. Most of the time, it would run perfectly fine. Once in a while we would see the error message below displayed...
Failed to open the connection. Failed to open the connection. C:\DOCUME1\USBOAD1\LOCALS~1\Temp\{432E6564-2811-4364-84FB-5E315F8DCBCA}.rpt
CrystalReportViewer - CrystalReportViewer1
Error: Object reference not set to an instance of an object.
We don't know how to reproduce this error. We tried looking into the BusinessObjects log files and the error is trapped inside C:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Logging\crystalras_2009420_3626_2716_ras.log with the message below:
ErrorLog 2009 4 21 11:28:28.598 2716 10272 (\servers\ras\dtsagent\reporthandler.cpp:11592): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:11588 ErrorCode:756 ErrorMsg:"Failed to open the connection.
Failed to open the connection.
C:\DOCUME1\USBOAD1.000\LOCALS~1\Temp\{432E6564-2811-4364-84FB-5E315F8DCBCA}.rpt" DetailedErrorMsg:"
Question:
Does anyone know why this is happening? Any help will be much appreciated. It happens maybe 1 out of 10 times the report runs.
Versions:
CR XI R2 SP1
.Net Framework 2.0
Windows 2000 SP4

Hi,
Give it a try by using the close and dispose method for report object and also use the GC.collect.
Hope it helps!!
Amit

Spinning beach ball of death - Error when running Chrome - kernel: IOSurface: buffer allocation size is zero

I get the following error when running Chrome v18.0.1025.163 on my MacBook Pro with MacOS 10.7.3
kernel: IOSurface: buffer allocation size is zero
I have had many tabs crash, then it crashes the Chrome application, then quickly making my entire Mac unresponsive with a spinning beach ball of death. I am not sure if it is Chrome or not, as I tend to do most of my work these days in a browser.
Have others seen this? Is there a fix? What can I do to stop these crashes?

As far as I've been able to discover, this bug is specific to WebKit browsers running (Chrome and Safari are based on WebKit). Perhaps it is related to those browsers running plugins (like Flash) and using an IOSurface to pass the rendering data back from the plugin. This issue was constant on my late 2010 MBP and would freeze the machine entirely once a day. Having switched to using Firefox or Opera I no longer see ANY messages for "IOSurface: Buffer allocation size is zero". Thankfully, this also comes without any more freezing when time machine starts up or at any other time.
It looks like there are a lot of changes going on in WebKit relating to IOSurface usage (http://svnsearch.org/svnsearch/repos/WEBKIT/search?logMessage=iosurface). Hopefully this will be fixed very soon.

Error when running time evaluation

Similar Messages

Maybe you are looking for