Error WHen rying to Drill down in the Report

Hi ,
I am getting the below error when trying to Drill down on a characterstic in the Report.
"500 Internal Server Error"
BEx Web Application
Failed to process request; contact your system administrator
Information for Administrator
To avoid this exception see the steps below. To help SAP better investigate this issue, you will need to provide the diagnostic information from these steps.
1. Most likely, the issue you are experiencing has already been corrected. Please make sure that the most recent patch level is deployed on your system according to notes 1033246 and 1011241. Starting with Support Package Stack 16 patch level 30, BI Java is delivered according to the synchronized delivery process described in the note 1033246.
2. Please ensure that NetWeaver Business Intelligence Diagnostics & Support Desktop Tool does not report any issues on your server according to note 937697. You can start it by clicking here (administrator permissions are required).
3. When opening any customer message on this issue, please attach:
Support Desktop Tool support info ZIP file according to note 937697,
Required information for reproduction according to note 948490.
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Termination message sent
ABEND RS_EXCEPTION (000): ORA-00904: "P0000"."CATTYPE_OT": invalid identifier
MSGV1: ORA-00904: "P0000"."CATTYPE_OT": invalid
MSGV2: identifier

Good day,
Please check if Note 1327130 helps ...
Regards,
Karen

Similar Messages

Error when trying to drill down by region in BW report.

Hi,
I am getting following error when trying to drill-down according to region in BI report.
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
System error in program SAPLRRK0 and from LIFT_DEL_H-02
can anybody please tell me how to solve this error.
Thanks in advance.
Vaibhav

Hi,
With the help of ABAPer, you can debug the short dump, if its a dump? Check whether this Infoobject is Authorization relevant?
Regards,
Suman

Drop down/drill down for the report

HI I have a requirement to have a kind of drop down menu on the heading level. So that if the data is say sales by model, on the invoice_date column, the user would have the option to look at this weeks' invoices, this months, etc.
I know there are Parameters up front to do this but they want this kind of drill down style.
Is there a way to do this in CR or via one of the add on products?

Hi
Apply record selection formula.
Create a formula field to display specific name for month, week etc.
Apply a group on this formula field.
Regards
Sourashree

Error Message appears when drilling down from a report.

Hi,
I am using CR XI R2.
I have an rpt file that displays a chart from a sub report.
I tested it on the CR designer and report viewer - works ok.
When I display this report in my .Net application, I get an error message when drilling down from this chart : "The Report Application Server failed"
When looking at the log files I see this error message:
4 19 13:11:14.770 5336 5564 (\servers\ras\dtsagent\reporthandler.cpp:11622): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:11618 ErrorCode:997 ErrorMsg:"" DetailedErrorMsg:""
This is a Viewer error - but when drilling down from the Report Viewer I don't get this exception.
Does anyone know what this mean?

Too strange and my require a phone support case;
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Three ideas:
1) Install CR designer on one of the boxes where this does not work and try to run the report there
2) Add a line to your code and save out the report just after your database logon once ( .saveAs). try to run this report in the CR designer.
3) Use the [modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility to compare the runtime - both CR and db client between computers that work and those that do not.
Ludek

Drill-down lost in Report Builder

Ever since the CFMX7.02 upgrade, we have lost the ability to
drill-down on the Report Builder reports which previously had
drill-down capability. I am referring to summary lines which
contained a link to the detail. Has anyone experienced this and is
there a fix for it?

Do you choose PDF instead of flash paper as the output
format? By some reason, the drill-down function does not work in
flash paper format.
Good luck,
Daniel

"Unauthorized Host" error when you try to connect to the admin server

"Unauthorized Host" error when you try to connect to the admin server

If you see this error message when you try to connect to a Netscape
administration server:
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).
</OL>
For Commerce Server or Communications Server (1.x) on Windows NT:
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.
Once you have access to your administration server, you can try again to
set up the access controls you want.
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.
</UL>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.

"Unauthorized Host" error when you try to connect to the admin server

If you see this error message when you try to connect to a Netscape
administration server:
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).
</OL>
For Commerce Server or Communications Server (1.x) on Windows NT:
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.
Once you have access to your administration server, you can try again to
set up the access controls you want.
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.
</UL>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.

How to setup the drill down on union report

Hi,
I'm setting the union report.
I want to set the drill down to another report.
But I can't setup it.
Would you please tell me how to setup.
Thank you.

Hi Hemlatha
In Crystal Reports, to prevent the ability to drill down into a subreport when published on the Web, add a text object that is filled with blank spaces, created by pressing the 'Space Bar' and 'Enter' for line returns, to eclipse the subreport.
This workaround is applicable only to subreports that does not grow in size. For example, subreports that display only a chart or graph.
Steps to Add a Text Object over a Subreport
1. In the Crystal Reports Designer of the main report, insert a text object over the subreport.
2. Resize the text object to be the same size or a little larger than the subreport object on the main report.
3. Fill the text object with blank spaces created by pressing the 'Space Bar' and 'Enter'. This is necessary because resizing a text object without
the blank spaces will not maintain its size when it has been published on the Web.
====================
NOTE:
You can format the text object with a hyperlink to another report, another file or a URL.
====================
Now, when the Crystal report is previewed on the Web, the text object that fully eclipses the subreport will prevent the ability to drill down into it.
Regards
Girish

When I try to down load the software i get "this link needs to be opened with an application"

help please
when I try to down load the software i get "this link needs to be opened with an application"
What kind of application do I need to choose?

Lynda in woodstock this error occurs if the AAM Detect Plug-in is not loaded. Please try using a different web browser or installing through the Creative Cloud Desktop application. You can find more details at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

Error when registring Provider after finished install the portal.

Error when registring Provider after finished install the portal.
Hi.. we are using Oracle9iAS 9.0.2.0.1, Sun Solaris 8.
Our problem is, after we finished installed the iAS, then open the Portal, and we tried to register a provider, we get these errors:
"You are not authorized to view this page"
"This component ID: 1068970504 has no existing versions - you need to create one first (WWV-01808)"
"Error : Failed to service the client. No further information available"
"Error: The XML parser encountered an Error, and could not complete the conversion for portlet id=6,343, it returned the following message: XML Parsing Error "
can anybody help?...Should we, after the installation, should install any patches?
Thanks.

Hi
When you boot from the install disk, before you proceed through the install screens, first go to the Installers menu, and choose Disk Utility. If the internal drive appears, select it and click Repair Disk. See if you get errors, and if Disk Utility is able to correct those errors. If the drive does not appear, you may have serious drive issues which another drive utility (such as DiskWarrior) may be able to correct, but it may be severe enough to necessitate replacing the drive.
Since you've already tried Erase and Install, can I assume you have a backup of any files you need? If not, if you have access to another Mac, can you restart the G5 in Firewire mode (restart with the T key held down) and connect it using a Firewire cable to your other Mac. If the G5's drive appears on the other Mac's desktop, copy across any files you need.
Matt

Drill down from the financial reports

When generating a P&L or Balance sheet, it is not possible to view what transaction the amount is made of. you have to either generate a general ledger report or have to chart of account window open at the same time. Simple programs like quickbooks have the functionality to do drill down from any report. we have multiple customers for whom this situation is very aggravating.
We hope you can find a solution or make this part of a new release.
Thank you
Sophie St-pierre

Hi
I hope you will get answer from this solved using pop up window for drill down
Thanks & Regards
Harsimran

TS3297 My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networ

My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networkl.

Can't connect to the iTunes Store
Make sure that time zone is correct in addition to date and time

I am getting the following error when I open my Safari Browser.the proceedure entry point sqlite3_wal_ check point could not be located in the dynamic link library SQLITE3.DLL

I am getting the following error when I open my Safari Browser.the proceedure entry point sqlite3_wal_ check point could not be located in the dynamic link library SQLITE3.DLL

Try going back to a restore point > System Restore - Microsoft Windows

Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. what now?

Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. What now?

I am getting this error message as well. I have just downloaded Lightroom recently. I try to click on Lightroom / preferences....and nothing happens. I tried to uninstall and it is greyed out so I can't do that either. Suggestions? Please help?

Keep getting this error when ever I try to use the CC_2014

keep getting this error when ever I try to use the CC_2014 InDesign
Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders. Ensure that you have appropriate permissions and then restart Adobe InDesign.
Also have Ai quit out on me in the CC_2014.
This is very frustration since I use these the most

For MAC try to give permissions to Adobe Indesign Folder:
Users/[user]/Library/Caches/Adobe InDesign
Users/[user]/Library/Preferences/Adobe InDesign
Access hidden user library files | Mac OS 10.7 and later
For Windows try to give permissions to Adobe Indesign Folder:
C:\Users\[username]\AppData\Roaming\Adobe\InDesign
C:\Users\[username]\AppData\Roaming\Adobe\InDesign
Also you can try logging in under a local administrator account as suggested by jeff.

Weird error when clicking on instance- flow from the console

When I have heavy volume coming in for the bpel server(ex: hundreds of instances generated at a time), I see the following weird error when I am trying to see the instance flow from console:
Process state off. The process class "BugBAM" (revision "v2004_12_20__61032" ) has not been turned on. No operations on the process or any instances belonging to the process may be performed if the process is off. Please consult your administrator if this process has been turned off inadvertently.
I didn't do anything to the process to turn the state off. What does this error message mean?
Thanks, Jenny

I am assuming that you are using 10.1.2 beta 1. Is that correct? I am wondering if in that version there is a switch that turns a process off when a new version of the process is deployed (this would be a bug because the active process should only be switched to retired).
Next time you get this error, could you please go to the BPEL Console and check the state of the BPEL process.
We will try to trace the error message in the source code and try to determine if there are other circumpstances which would generate the same error code.
Edwin

Error WHen rying to Drill down in the Report

Similar Messages

Maybe you are looking for