Error when save as template

HI
i had use database attach to upgrade my sharepoint site from 2007 to 2010.
i got following error when i click save as template on sharepoint 2010 after upgrade.
can any know let me know how to fix it.
Field type CrossSiteLookup is not installed properly. Go to the list settings page to delete this field.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: ea0d7973-f237-4b45-8230-abb302b5c100
Date and Time: 7/20/2010 7:22:06 PM
Thanks kevin

Unzip the CrossSiteLookupField.zip file to extract SPSolutions.SharePoint.CrossSiteLookupField.wsp file. There should be a install.bat file in the zip file. You can run it using command prompt. If you do not have an install file, you can either use
Powershell commands or stsadm to install this feature.
Here are the steps to install the feature using stsadm (I don't have a SharePoint VM near by. So commands should be simillar to the below ones)
Open command prompt with elevated privileges
Navigate to the folder where the SPSolutions.SharePoint.CrossSiteLookupField.wsp is extracted
Execute the following commands:  "%CommonProgramFiles%\Microsoft Shared\web server extensions\14\BIN\stsadm.exe" -o addsolution -filename SPSolutions.SharePoint.CrossSiteLookupField.wsp
"%CommonProgramFiles%\Microsoft Shared\web server extensions\14\BIN\stsadm.exe" -o deploysolution -name SPSolutions.SharePoint.CrossSiteLookupField.wsp -local -allowgacdeployment -allcontenturls

Similar Messages

  • Error when publishing web templates in the portal

    hi Gurus,
                  I am getting this error when I try to publish my web report on the portal,
    Field E_SX_META_DATA not a member of OUTPUT.
    Can anyone please let me know how to go about fixing this error ?
    Thanks in advance,
    Nip

    Hi,
    You mean you want to execute the template even after this design time error. If yes then you can simply go to the backend and Transaction "SE38" then in the next screen type "RS_TEMPLATE_MAINTAIN_70" and then in the next screen type your template name ans then press "Execute" button to see temlate in Java Web.
    Imran...

  • Error when using the template installer MI post installation process

    Hi all,
    I am busy to configure the Netweaver Administrator in order to create setup packages for mobile devices. This is a WAS 6.40 ABAP JAVA instance with mobile infrastructure.
    I have installed the netweaver SR1 and upgraded abap and java to SPS18 afterwards.
    Afterwards I used the template installer, I executed:  MI post installation process.
    But when I did this an error message occured on the following node:
    step ID 8 registering RFC connection.
    Error message:
    Element
    'SAPConfigLib.<SID>.Unclassified.set_Server_Service':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException:
    <--Localization failed:
    ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle',
    ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments:
    []--> : Can't find resource for bundle java.util.PropertyResourceBundle, key
    com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!179-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
    -:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
    -:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
    -:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.89
    -:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41 Element 'SAPConfigLib.<SID>.Unclassified.set_Server_Service':Error during executing Java Reflection:JCO.Client not connected in repository call
    Here after I followed manual: MI25 SPS18 inst newtech.pdf for configuring the NWA.
    I checked the complete manual, but still the error message occurs, when I am using the template installer.
    There is one more thing.
    When I go to the NWA, to the Mobile Infrastructure node, allmost all subnodes give me the following error:
    (For instance on hierarchy grouping:)
    Failed to get hierarchy group elements from middleware. Reason: Could not connect to middleware.
    Does this error message relate to the other error message?
    Please give me advise/hints/directions to solve this problem....
    Your help will be appreciated!
    Best regards,
    Jacco Raymakers

    I got error during use of template installer in NWA. It is MI post installation in N/w2004s SP09
    Error message:
    Element
    'SAPConfigLib.<SID>.Unclassified.set_Server_Service':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException:
    <--Localization failed:
    ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle',
    ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments:
    []--> : Can't find resource for bundle java.util.PropertyResourceBundle, key
    com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!179-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
    -:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
    -:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
    -:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.89
    -:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41 Element 'SAPConfigLib.<SID>.Unclassified.set_Server_Service':Error during executing Java Reflection:JCO.Client not connected in repository call
    Please help me the resolve this.

  • Error when save the query

    Hi All,
    We have migrated from 3.x to 7.0 (QA). In BEx analyzer when we save the new query the following error message getting.
    1. Program GP77SAI0MJZN9QMLKWR6SIGCYYA does not exist
    2.  An exception with the type CX_SY_PROGRAM_NOT_FOUND occurred, but was neither handled locally, nor declared in a RAISING clause
    3. Program error in class SAPMSSY1 method: UNCAUGHT_EXCEPTION
    Please help me from this error.
    Thanks in Advance
    Ravi

    Hi,
    Check following thread and underlying note..
    error when saving a query "CX_SY_PROGRAM_NOT_FOUND"
    Abhijeet
    Reward pts if useful..

  • Urgent - Error when opening web template

    Hello,
    I was trying to open few CRM SAP standard web template in WAD. When I try to open the web template, getting the following error:
    'The selected web template contains HTML fragments, non-supported web items or it is not designed to be edited with WAD. ......' Although I can execute templates and also can execute with 'RS_TEMPLATE_MAINTAIN' in BWD.
    I tried all the CRM web templates and getting same opening error. How can I solve this problem? I want to see the template in WAD. Is there any solution?
    I appreciate your help.
    Regards,
    Ashok

    You can only view the template "HTML" (code) view with WAD for the problem you described.  This can be done using RS_TEMPLATE_MAINTAIN or WAD.  You cannot view the template using WAD to get the "Layout" graphical view (is this what you are trying to see?). 
    The only way to get around this is to strip out the HTML "fragments" from the HTML code, or to partition the templates into sub-templates.

  • Error  when Save to  BPM MDS

    OS : Windows 7 X64
    JDeveloper: 11.1.1.6.0.
    RCU : 11.1.1.6.0
    WebLogic : 10.3.5
    SOA Suite: 11.1.1.6.0
    Above is my BPM Suite installation environment.
    In Chapter 11 Using Process Composer , page 268. i followed the step by step, trying to create and publish BPM project template in BPM Studio to MDS.
    In this verion of Jdeveloper. the "Publish to BPM MDS" option is missing, instead of "Save to BPM MDS". SO,
    Right click on the QuoteProcessLab(project name) node and select the "Save to BPM MDS" menu,then "Save to BPM MDS" dialog pops up. when click the ok button.error occurs.
    oracle.bpm.metadata.exception.AbortedOperationMetadataException: BPM-70801: Metadata operation failed
         at oracle.bpm.metadata.impl.MdDomainImpl.createTemplateProject(MdDomainImpl.java:527)
         at oracle.bpm.pml.service.security.SecurityMdDomainDecorator.createTemplateProject(SecurityMdDomainDecorator.java:197)
         at oracle.bpm.pml.service.impl.StudioMetadataServiceImpl.saveTemplateProject(StudioMetadataServiceImpl.java:150)
         at oracle.bpm.fusion.soa.mds.ui.PublishMdsProjectDialog.publishTemplateProject(PublishMdsProjectDialog.java:372)
         at oracle.bpm.fusion.soa.mds.ui.PublishMdsProjectDialog.access$200(PublishMdsProjectDialog.java:66)
         at oracle.bpm.fusion.soa.mds.ui.PublishMdsProjectDialog$1.run(PublishMdsProjectDialog.java:108)
         at oracle.bpm.ui.peer.swing.SwingToolkit$JobFromRunnable.run(SwingToolkit.java:181)
         at foxtrot.AbstractWorkerThread$2.run(AbstractWorkerThread.java:49)
         at java.security.AccessController.doPrivileged(Native Method)
         at foxtrot.AbstractWorkerThread.runTask(AbstractWorkerThread.java:45)
         at foxtrot.workers.DefaultWorkerThread.run(DefaultWorkerThread.java:153)
         at java.lang.Thread.run(Thread.java:662)
    Caused by: javax.ejb.EJBException: ; nested exception is:
         java.rmi.UnmarshalException: Incoming message header or abbreviation processing failed ; nested exception is:
         java.io.InvalidClassException: org.eclipse.persistence.internal.indirection.DatabaseValueHolder; local class incompatible: stream classdesc serialVersionUID = 1128857921468654749, local class serialVersionUID = 4164360925847093650; nested exception is: java.rmi.UnmarshalException: Incoming message header or abbreviation processing failed ; nested exception is:
         java.io.InvalidClassException: org.eclipse.persistence.internal.indirection.DatabaseValueHolder; local class incompatible: stream classdesc serialVersionUID = 1128857921468654749, local class serialVersionUID = 4164360925847093650
         at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.unwrapRemoteException(RemoteBusinessIntfProxy.java:121)
         at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:96)
         at $Proxy65.listHistoryChanges(Unknown Source)
         at oracle.bpm.metadata.update.UpdateFromBaseTemplateHelper.writeTemplateRevisionProperties(UpdateFromBaseTemplateHelper.java:57)
         at oracle.bpm.metadata.impl.MdDomainImpl.createTemplateProject(MdDomainImpl.java:500)
         ... 11 more
    Caused by: java.rmi.UnmarshalException: Incoming message header or abbreviation processing failed ; nested exception is:
         java.io.InvalidClassException: org.eclipse.persistence.internal.indirection.DatabaseValueHolder; local class incompatible: stream classdesc serialVersionUID = 1128857921468654749, local class serialVersionUID = 4164360925847093650
         at weblogic.rjvm.MsgAbbrevJVMConnection.dispatch(MsgAbbrevJVMConnection.java:507)
         at weblogic.rjvm.t3.MuxableSocketT3.dispatch(MuxableSocketT3.java:330)
         at weblogic.socket.BaseAbstractMuxableSocket.dispatch(BaseAbstractMuxableSocket.java:298)
         at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:950)
         at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:888)
         at weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:339)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.work.ExecuteRequestAdapter.execute(ExecuteRequestAdapter.java:21)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    Caused by: java.io.InvalidClassException: org.eclipse.persistence.internal.indirection.DatabaseValueHolder; local class incompatible: stream classdesc serialVersionUID = 1128857921468654749, local class serialVersionUID = 4164360925847093650
         at java.io.ObjectStreamClass.initNonProxy(ObjectStreamClass.java:560)
         at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1582)
         at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1495)
         at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1315)
         at java.io.ObjectInputStream.readObject(ObjectInputStream.java:350)
         at weblogic.rjvm.ClassTableEntry.readExternal(ClassTableEntry.java:36)
         at java.io.ObjectInputStream.readExternalData(ObjectInputStream.java:1791)
         at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1750)
         at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1328)
         at java.io.ObjectInputStream.readObject(ObjectInputStream.java:350)
         at weblogic.rjvm.InboundMsgAbbrev.readObject(InboundMsgAbbrev.java:65)
         at weblogic.rjvm.InboundMsgAbbrev.read(InboundMsgAbbrev.java:37)
         at weblogic.rjvm.MsgAbbrevJVMConnection.readMsgAbbrevs(MsgAbbrevJVMConnection.java:283)
         at weblogic.rjvm.MsgAbbrevInputStream.init(MsgAbbrevInputStream.java:213)
         at weblogic.rjvm.MsgAbbrevJVMConnection.dispatch(MsgAbbrevJVMConnection.java:498)
         ... 9 more
    oracle.bpm.metadata.exception.AbortedOperationMetadataException: BPM-70801: Metadata operation failed
         at oracle.bpm.metadata.impl.MdDomainImpl.createTemplateProject(MdDomainImpl.java:527)
         at oracle.bpm.pml.service.security.SecurityMdDomainDecorator.createTemplateProject(SecurityMdDomainDecorator.java:197)
         at oracle.bpm.pml.service.impl.StudioMetadataServiceImpl.saveTemplateProject(StudioMetadataServiceImpl.java:150)
         at oracle.bpm.fusion.soa.mds.ui.PublishMdsProjectDialog.publishTemplateProject(PublishMdsProjectDialog.java:372)
         at oracle.bpm.fusion.soa.mds.ui.PublishMdsProjectDialog.access$200(PublishMdsProjectDialog.java:66)
         at oracle.bpm.fusion.soa.mds.ui.PublishMdsProjectDialog$1.run(PublishMdsProjectDialog.java:108)
         at oracle.bpm.ui.peer.swing.SwingToolkit$JobFromRunnable.run(SwingToolkit.java:181)
         at foxtrot.AbstractWorkerThread$2.run(AbstractWorkerThread.java:49)
         at java.security.AccessController.doPrivileged(Native Method)
         at foxtrot.AbstractWorkerThread.runTask(AbstractWorkerThread.java:45)
         at foxtrot.workers.DefaultWorkerThread.run(DefaultWorkerThread.java:153)
         at java.lang.Thread.run(Thread.java:662)
    Caused by: javax.ejb.EJBException: ; nested exception is:
         java.rmi.UnmarshalException: Incoming message header or abbreviation processing failed ; nested exception is:
         java.io.InvalidClassException: org.eclipse.persistence.internal.indirection.DatabaseValueHolder; local class incompatible: stream classdesc serialVersionUID = 1128857921468654749, local class serialVersionUID = 4164360925847093650; nested exception is: java.rmi.UnmarshalException: Incoming message header or abbreviation processing failed ; nested exception is:
         java.io.InvalidClassException: org.eclipse.persistence.internal.indirection.DatabaseValueHolder; local class incompatible: stream classdesc serialVersionUID = 1128857921468654749, local class serialVersionUID = 4164360925847093650
         at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.unwrapRemoteException(RemoteBusinessIntfProxy.java:121)
         at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:96)
         at $Proxy65.listHistoryChanges(Unknown Source)
         at oracle.bpm.metadata.update.UpdateFromBaseTemplateHelper.writeTemplateRevisionProperties(UpdateFromBaseTemplateHelper.java:57)
         at oracle.bpm.metadata.impl.MdDomainImpl.createTemplateProject(MdDomainImpl.java:500)
         ... 11 more
    Caused by: java.rmi.UnmarshalException: Incoming message header or abbreviation processing failed ; nested exception is:
         java.io.InvalidClassException: org.eclipse.persistence.internal.indirection.DatabaseValueHolder; local class incompatible: stream classdesc serialVersionUID = 1128857921468654749, local class serialVersionUID = 4164360925847093650
         at weblogic.rjvm.MsgAbbrevJVMConnection.dispatch(MsgAbbrevJVMConnection.java:507)
         at weblogic.rjvm.t3.MuxableSocketT3.dispatch(MuxableSocketT3.java:330)
         at weblogic.socket.BaseAbstractMuxableSocket.dispatch(BaseAbstractMuxableSocket.java:298)
         at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:950)
         at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:888)
         at weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:339)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.work.ExecuteRequestAdapter.execute(ExecuteRequestAdapter.java:21)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    Caused by: java.io.InvalidClassException: org.eclipse.persistence.internal.indirection.DatabaseValueHolder; local class incompatible: stream classdesc serialVersionUID = 1128857921468654749, local class serialVersionUID = 4164360925847093650
         at java.io.ObjectStreamClass.initNonProxy(ObjectStreamClass.java:560)
         at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1582)
         at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1495)
         at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1315)
         at java.io.ObjectInputStream.readObject(ObjectInputStream.java:350)
         at weblogic.rjvm.ClassTableEntry.readExternal(ClassTableEntry.java:36)
         at java.io.ObjectInputStream.readExternalData(ObjectInputStream.java:1791)
         at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1750)
         at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1328)
         at java.io.ObjectInputStream.readObject(ObjectInputStream.java:350)
         at weblogic.rjvm.InboundMsgAbbrev.readObject(InboundMsgAbbrev.java:65)
         at weblogic.rjvm.InboundMsgAbbrev.read(InboundMsgAbbrev.java:37)
         at weblogic.rjvm.MsgAbbrevJVMConnection.readMsgAbbrevs(MsgAbbrevJVMConnection.java:283)
         at weblogic.rjvm.MsgAbbrevInputStream.init(MsgAbbrevInputStream.java:213)
         at weblogic.rjvm.MsgAbbrevJVMConnection.dispatch(MsgAbbrevJVMConnection.java:498)
         ... 9 more

    I had the same problem while trying to "Save to BPM MDS" from jDeveloper, while I tried to save the BPM project to a directory (in terms of BPM Composer) in the BPM MDS, where the original project I checked out still was located in. The (old) project in the BPM MDS was still locked by the user I used to save the newer BPM perject version to BPM MDS. On the otherhand, I worked fine after I changed the applications name. Not what versioning should be like, but at least a workaround.
    Host setting:
    OS : Windows 7 x64
    jDeveloper: 11.1.1.7.0 on JDK 1.6.0_24 (x64)
    SOA Composite Editor: 11.1.1.7.0.00.08
    BPMN Editor: 11.1.1.7.0.0.8
    VM setting:
    JDK: 1.7.0_21 (x64)
    RCU : 11.1.1.7.0
    WebLogic : 10.3.6
    SOA Suite: 11.1.1.7.0
    BPM Suite: 11.1.1.7.0

  • Run-time error when saving Web Template

    I recently got upgraded to Windows XP SP2 from Windows 2000.  Since then, when I make a change to a Web template, it can be as simple as check a Web Item property, and then try to save it, I get an error.  A window (called SAPBWWebAppDesigner) pops up with the message "Run-time error '-2147417848 (80010108)  Automation error.  The object invoked has disconnected from its clients". 
    I then get thrown out of WAD and have to log in again.  has anyone encountered this behavior? 
    Any suggestions would be greatly appreciated.

    hi,
    I had a lot of troubles with WAD and there are two causes of those:
    1. bad installation of SAP GUI and its add-ons (see note 197460)
    2. bugs in WAD
    Check note:
    857360 and those (but they are pretty old) 815044, 318248, 647405, 573436,
    Conclusion from above notes is to install latest GUI patch - talk about this with your basis staff (I think most recent for v6.40 is patch 11
    Regards,
    Andrzej
    ps. in case of errors always make a search in service.sap.com/notes on keywords
    Message was edited by: Andrzej Krysiuk
    Message was edited by: Andrzej Krysiuk

  • Illustrator cs5 can't saved the file or unknown error when save

    Hello,
    I have couple of brand new Mac OS X 10.6.4 with Adobe Ilustrator CS5 running on Intel Xeon Quad Core and 3GB of RAM.
    All updates including OS have been applied recently. For some reasons, the file that was worked on any of this computer can't be saved to any other format other than illustrator template itself. When saved, it either just crashed or gave an error "an unknown error has occured".
    So, I save the file as template and tested on the PC configure that has 8GB of RAM, Intel Quad Core and still couldn't save the file into .ai format. Same error was given.
    I tested the illustrator on mac with few simple lines or vector graphics and it could save fine.
    I thought it was the file itself but it appeared to be not. Due to, same design method was produced on the old mac os system with cs2 worked fine.
    Does anyone know what is wrong? I called the Adobe techs and they transfered me to someone in India who didn't know what causing it either.

    Also, I tried to reset the prefs and settings, uninstall with cleaner tool and reinstall, reload the transparent setting, etc.. including some steps the adobe techs told me.
    It still gave same error.

  • Error when uploading a template

    Hello all,
    Environment: Oracle Apex - 4.0 (EPG) and Oracle 11G.
    I have configured print setup in Apex to work with BI Publisher. I have created an rtf file and trying to upload that rtf file and keep getting the following error message and I am unable to upload the template.
    I am getting this error in the "upload Report Layout" screen of "Report Queries".
    The error is occurring when I click on Next after selecting the rtf template.
    As soon as I click on the next button, the message "The Website cannot display the page" is getting displayed and then when I click on the refresh the page, the following message is getting displayed.
    Expecting p_company or wwv_flow_company cookie to contain security group id of application owner.
    Error ERR-7621 Could not determine workspace for application (:) on application accept
    It's a very small file (400KB). I have no clue why this is happening. I appreciate your help.
    Thanks in advance.

    Hello,
    I think you can't ignore file properties but you can clean them. Use FileInfo class to extract file properties then remove special char. You also need to make sure that there is no special char in file name as well.
    Refer this link:
    http://charlesemes.blogspot.sg/2011/08/moving-crm-attachments-to-sharepoint.html
    http://sharepoint.stackexchange.com/questions/34953/uploading-files-to-sharepoint-containing-the-ampersand-character
    Hope it could help
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • Error When Save Message Mapping

    Hi evreybody,
    I try to save my mapping. I did the test to check to know if everything is ok. The test is executed succesfully but when I try to save, I receive the following error message:
    Internal error: Unable to transfer changes for object Message Mapping MM_Order_Idoc | http://accenture.com/PI01/Idoc to change list "Standard Change List" (348cd3a0-f384-11dd-c70e-003005989c0a) since object still in change list "Standard Change List" (faa66160-f699-11dd-8a1b-003005989c0a)
    Thank you for your support,
    Mohamed.

    Release the lock by going to XI Admin page and check Integration repository and lock tab where you can see the objects locked ,release the lock and you can do the needed.
    Rajesh

  • Error when opening the template in WAD

    Hi,
    When I am trying to open any of the existing templatein WAD it is giving me the error
    <b>Internal error:No tempalte property standard form
    Run time error '91'
    Object variable or with block variable not set</b>
    Thnaks
    Priya

    Hi,
    You can use the below given solution to avoid this problem:
    - After log-in to the Web Application Designer, choose the option "New" instead of "Open" option.
    - After the above step, choose the "Open" option to open the required web template
    Hope the above solution helps.
    Cheers
    Bala Koppuravuri

  • Error when collecting web template to transport

    Hi All ,
    I am gettingthe following error
    "No authorization for transporting role SAP_BWC_PATTERN_OBJECTS "
    when I collect a standard custom web template which was create by copying 0analysis_pattern template and adding some customizations.
    Please guide me.
    Thanks,
    HM

    check tcode - SU53 for authorization error immediately after you get the error ,if you find some fwd it to ur basis to assign proper auth to your user id.
    Hope it Helps
    Chetan
    @CP..

  • Acrobat X Pro Error when Save As JPEG: Insufficient Disk Space to Perform Operation

    Using Acrobat X Pro when trying to save a PDF as an Image - JPEG format, the Acrobat application fails with an error: "Acrobat could not save a page in this document because of the following error: Insufficient disk space to perform the operation (Page 1)". Please help with a solution to this problem. The problem is not because of insufficient disk space on my PC.

    Thank you for the reply.
    Please can you help with the location of the TEMP folder and which temporary files to delete (file type/extension). Each of the these folders include an "Adobe" Folder. Each "Adobe" folder size is less than 1MB.
    I am using Windows 8.1 Enterprise 64-bit. I have the following Adobe Acrobat applications installed: Distiller X, X Pro and Reader XI. Is this combination perhaps causing the problem?

  • Variable not defined: '_MR' error when using sub template

    Hi,
    I am creating a check print report. When I had the check layout and the invoice layout on the same template it worked fine. But when I moved the check layout to a sub template then I started getting the error Variable not defined: '_MR' but I dont have any variable '_MR' can some please help me on this.
    Thanks a ton in advance
    Lakshmanan a.

    Hi Lakshmanan
    Its probably worth running the XML Publisher template regenerator program. somehow, I think your templates are out of sync
    Regards
    Tim
    http://blogs.oracle.com/xmlpublisher

  • Error when save date in SQL database

    Hi all,
    I try to save a date in to a sql database, but when I run my program I get following error:
    Invalid object 11/21/05 9:32 AM of type java.sql.Date assigned to host variable 3.
    In my database table I have a fields date (type Data)en time type(Time).
    this is the source:
         public void createTitle(int title_id, String description, String user)
              throws SQLException {
              // TODO Auto-generated method stub
              Date date = new Date();
              String dateFormat = "YYYY-MM-DD";
              String timeFormat = "HH:mm:ss";
              SimpleDateFormat ddf = new SimpleDateFormat(dateFormat);
              SimpleDateFormat tdf = new SimpleDateFormat(timeFormat);
              String det = ddf.format(date);
              String creationTime = tdf.format(date);
              PreparedStatement newTitle = conn.prepareStatement("INSERT INTO BE_TITLE (TITLE_ID, DESCRIPTION, DATE_CREATE, TIME_CREATE, USER_CREATE) VALUES (?,?,?,?,?)");     
              try{
                   newTitle.setInt(1,title_id);
                   newTitle.setString(2,description);
                   newTitle.setDate(3, new java.sql.Date(date.getTime()));
                   newTitle.setTime(4, new java.sql.Time(date.getTime()));
                   newTitle.setString(5, user);
                   newTitle.executeUpdate();
              }finally{
                   newTitle.close();
    Can someone give me a solution for this error
    Richard

    Hi Richard,
    in your application, you atempt to insert a java.sql.Date value into a DATE column, which has non-zero time-components. Open SQL rejects such an atempt.
    Please allow me to quote from the OSS message (452727 2004), which Detlev refers to in his quote:
    <i>
    about one year ago, we had a very lengthy discussion on this issue - not only internally at SAP but also with Jonathan Bruce, the specification lead for JBDC at Sun.                                                                               
    We have the following dillema:                                                                               
    The javadoc of the constructor java.sql.Date(long) states:                                                                               
    "If the given milliseconds value contains time information, the driver will set the time components to the time in the default time zone (the time zone of the Java virtual machine running the application) that corresponds to zero GMT."                                                                               
    With Jonathan Bruce, we tried to clarify when this normalization should take place.                                                               
    1) Source code inspection shows that it is not the class java.sql.Date the performs the normalization.                                                                               
    2) The Javadoc states that the JDBC driver should perform the             
    normalization. If it is the driver, more open questions arrise:                                                                               
    a) When shall the normalization be performed?                             
       - if a setDate method is invoked?                                      
       - only for INSERT and update statements or also for all other parameters?                                                               
       - shall the getDate method perform the normalization?                  
       - what about set/getObject?                                            
       - the java Docs of set/getDate don't tell anything about normalization.                                                            
       - according to which time zone shall the value be normalized?          
         - UTC                                                                
         - vm time zone?                                                      
         - database time zone?                                                                               
    3) If an automatic normalization is performed, data will be modified upon insertion (or extraction) from the database. This means that we cannot quarantee if we insert and Date object retrieve it again that the two objects will be equal.
    In the discussion with Jonathan, we couldn't clarify the issue. However, Jonathan promised that the JDK should be modified in such a way that the JDK is responsible for the normalization. (So far such a change has not been done).                                                                               
    In order to be on the safe side, SAP chose that Open SQL should reject any Date values that are not normalized. This is what we have          
    implemented and documented. I agree, that in this repect, Open SQL is stricter than the JDBC standard demands.                                                                               
    To help the application with the task to normalize a Date (and Time) object, we offer the helper class                                      
    com.sap.sql.DateTimeNormalizer which you find in opensql.jar.                                                                               
    To come to a conclusion, the bevavoir you observed is from our side not a bug of Open SQL but a feature. Please use DateTimeNormalizer to normalize Date objects appropriately.                                  
    </i>
    I hope, you can follow our reasoning.
    Best regards,
    Adrian

Maybe you are looking for