Error when save ERD diagram -an unnamed file contains invalid path

Hello,
When I try to save diagram I receive message "an unnamed file contains invalid path". Objects added to diagram are saved to repository but diagram is not...
I'm using Designer 10g on Windows Server 2003

I seem to remember there was a bug running certain of the Developer Suite products on Windows Server 2003. Think it was something to do with 10g versions and a missing dll. Probably best to search Oracle Support ( Metalink). I would first check your versions of both Designer and the database are certified agains Windows Server 2003. Good luck

Similar Messages

Unnamed File contain invalid Path

I've seen several references to this error in the past, but no solution. Does anyone know what the cause/fix is for this issue?
The problem is occurring when a user is trying to save an ERD.
Designer: 10.1.2.2
Platform: Windows
DB: Oracle 9.2.0.8.0
Thank you,
Steve

Hi Michael,
In response to your questions......
1) A user connects to an existing workarea/folder (versioning enabled), launches the ER Diagrammer from the tool palette, starts a new diagram, includes a single entity, and tries to save the diagram.
2) Some users consistently receive this issue.
3) Yes, that is the full error message.
There is a reference to this issue in Note: 298486.1, but it pertains to Discoverer. I have verified that Designer is certified under Windows 2003 (Note: 60705.1)
Thank you,
Steve

I/O Error when writing access Log buffer to file. error number: 28

Hi,
Oracle OracleAS Web Cache 10.1.2.3.0, Build 10.1.2.3.0 080201 is writing events like this:
[alert 13215] I/O Error when writing access Log buffer to file. error number: 28
I've looked for this alert and i've found this description:
WXE-13215 I/O Error when writing access Log buffer to file. error number: %d
Severity: alert
Cause: I/O error happened when OracleAS Web Cache tried to write to the access log file.
Action: Check the status of access log file. For example, see if the disk is full
Anybody knows what "error number: 28" stands for? The logs are sended to other server and it seems that the disk size is ok.
thanks!

I tested again...it seems LabVIEW doesn't like the way I wrote the measurement files. I attached a set of VIs (ZIP-file) to give you a clue how it was done. When I try to save and read a file containing just plain DBLs from a 1D-Array (see attached file generating VI) it works perfectly well for large file sizes.
So there might get something messed up by the way LabVIEW saved the measured data. You'll notice, that I (accidentally) left the "prepend array string size" input of "write to binary file" function unwired which means that the size information will be written as a type of header. Maybe this is the reason that it doesn't work as expected...
Attachments:
VibrationMeasurement.zip ‏76 KB
generate_test_bin_data.vi ‏12 KB

I get the following error when trying to open a pdf file... '*pdf.part could not be saved, because the source file could not be read"

I get the following error when trying to open a pdf file... '*pdf.part could not be saved, because the source file could not be read". I am able to open pdf files in IE and other programs.

I am encountering the same problem -- though with .qfx files from my bank. This worked fine in Firefox 31 ESR, but since upgrading to Firefox 33.0, I get the "<name>.qfx.part could not be saved, because the source file could not be read" when I attempt to download. (I should add that downloading PDF statements from the same site works fine, and that the qfx downloads work fine in IE and Chrome.)
I tried safe mode, it is still broken. Tried v34 beta, no luck. I reverted to version 31, it works again.
I guess I will stick with the older version until a solution is found...or just use an alternate browser to download my financial data.

Error When Attempting to Create a Password File

hi all,
i recevied the following error when attempting to create a password file via the ORAPWD utility. can anyone offer any insight into what is causing this problem?
$ ./orapwd file=/appl/oracle/product/9.2.0-64bit/dbs/orapwLEAF password=XXXXXX
Unable to find error file.
Error code 5
thanks

Try to set env variable ORACLE_HOME
Best Regards
Krystian Zieja / mob

An unnamed file contains an invalid path

Hi. I'm using Flash CS3 on Windows XP Pro (SP3) and for the
past two weeks, when attempting to save a file, I've been getting a
dialog which is headed as "Adobe Flash CS3" and reads: "An unnamed
file contains an invalid path. OK" After clicking OK, the dialog is
dismissed but the Flash ui does not respond. Quitting Flash and
restarting it again is OK - Flash behaves "normally". This issue
does not occur every time I try to save a document - but it has
occurred every time I've used Flash. It does not occur for any
other CS3 application. I have tried to uninstall and re-install
Flash. (Same issue.) I have also tried to re-install all of CS3.
(Same issue.) I use McAfee Security Center and have scanned the
system twice without finding any issues. I have run a checkdisk on
the hard disk drive and also defragged the hard disk drive. None of
these things has changed the behaviour. Can anyone offer any
advice?

Please post to the Discoverer forum:
Discoverer

Error when Write/read Cluster in binary file.

hi all,
I implemented a code (using the Labview example) to save and read cluster data (see attached file). The write part works properly but when I want to read the file, there is an error : "Error 4 occurred at Read from Binary File in main_save_data_V2.vi; LabVIEW: End of file encountered'.
BUT the data are correctly open. Why is there such message? any suggestions?
thank you.
Cedric
Attachments:
main_save_data_V2.vi ‏19 KB

Instead of predicting how many clusters to read, just set the count in the binary read to -1. That will read all that it can and I got no error. Here is all you need in order to read the file.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Read clusters.png ‏12 KB

Powerpoint 2013 throwing 'File in Use' errors when saving to a network drive, file is NOT in use

One of our sites is having a strange issue when saving to a network location in Powerpoint. I'm not sure it's a Powerpoint problem, but it's a place to start...
When saving a ppt to a mapped network drive (the client is running Windows 8 / Office 2013, the network drive is a DFS share, pointed to a Server 2012 machine if that matters), users will almost always get the following error:
"Someone else is working in (filepath\name) right now. Please try again later."
This happens regardless of where the file is being saved on the network drive, in fact it happens even when there is no pre-existing file with that name in the location. So, even if I'm saving a brand new copy of test.pptx to F:\Share\PPT where there
is not currently a test.pptx, I get the error.
Word, Excel, and all other tested apps save properly. Powerpoint can save correctly to the local computer, but not to the network drive or to My Documents (which redirects to the same network drive).
When the error pops up, if I look in Open Files in Computer Management on the Fileserver, I see the file I'm trying to save listed as being open, but it shows 'Disconnected' rather than a username.
Any suggestions would be appreciated - again, not sure that this is a Powerpoint problem - could be Windows 8 or some mysterious DFS thing...
Thanks.

Hello,
Been having a very similar issue in our environment and just came across this thread while Googling and looking for answers.
In our case, we have Windows 7 clients and 3 main files servers - 2 are Server 2008 R2, and one is Server 2012. We use PeerLink File Collaboration to sync the files between
the servers (similar concept to DFS).  For us, it seems to happen specifically with Excel 2013, and only when saving to the Server 2012 file server. I can reproduce the message pretty much every time. After seeing your post,
I tried it in Powerpoint just out of curiosity, but it saved properly - Word saves properly as well.
Been doing a bunch of testing to try and narrow it down, and this is what I've found:
Excel 2013 -> Server 2012 = error message.
Excel 2013 -> Server 2008 R2 = no error message.
Excel 2010 -> Server 2008 AND Server 2012 = no error message.
<o:p>We've been leaning towards the PeerLink replication as the culprit up to this point, but last night I did some testing with the PeerLink Collaboration turned off, and
still received the error message.. so now I'm even more confused!
I see that it's been a few months since your post.. have you made any progress here?</o:p>

Error when save as template

HI
i had use database attach to upgrade my sharepoint site from 2007 to 2010.
i got following error when i click save as template on sharepoint 2010 after upgrade.
can any know let me know how to fix it.
Field type CrossSiteLookup is not installed properly. Go to the list settings page to delete this field.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: ea0d7973-f237-4b45-8230-abb302b5c100
Date and Time: 7/20/2010 7:22:06 PM
Thanks kevin

Unzip the CrossSiteLookupField.zip file to extract SPSolutions.SharePoint.CrossSiteLookupField.wsp file. There should be a install.bat file in the zip file. You can run it using command prompt. If you do not have an install file, you can either use
Powershell commands or stsadm to install this feature.
Here are the steps to install the feature using stsadm (I don't have a SharePoint VM near by. So commands should be simillar to the below ones)
Open command prompt with elevated privileges
Navigate to the folder where the SPSolutions.SharePoint.CrossSiteLookupField.wsp is extracted
Execute the following commands: "%CommonProgramFiles%\Microsoft Shared\web server extensions\14\BIN\stsadm.exe" -o addsolution -filename SPSolutions.SharePoint.CrossSiteLookupField.wsp
"%CommonProgramFiles%\Microsoft Shared\web server extensions\14\BIN\stsadm.exe" -o deploysolution -name SPSolutions.SharePoint.CrossSiteLookupField.wsp -local -allowgacdeployment -allcontenturls

Error when inserting into dynamically created filename-file

Howry
Am am receiving the following error when i am trying to insert into a file that have a dynamic filename (through declared variable, as date etc.).
I presume it is trying to look for the target file with the same name as the dynamic value passed through by the variable, but cannot find it- can anyone tell me how i can rather create the file as appose to insert into an already created file..?
Your help in this regard is much appreciated.
Here is the error:
ODI-1217: Session SAPO_hlr_suburbs (1577001) fails with return code 7000.
ODI-1226: Step 6_Ins_final fails after 1 attempt(s).
ODI-1240: Flow 6_Ins_final fails while performing a Integration operation. This flow loads target table #l_date.unl.
ODI-1228: Task 6_Ins_final (Integration) fails on the target FILE connection SAPO_HLR_SUBURBS.
Caused By: java.sql.SQLException: File C:\Files\Gero work\ODI In Files\SAPO_HLR_SUBURBS/2012-01-24 12:06:13.463.unl was not found
     at com.sunopsis.jdbc.driver.file.FileConnection.prepareForWriting(FileConnection.java:339)
     at com.sunopsis.jdbc.driver.file.impl.commands.CommandInsert.execute(CommandInsert.java:50)
     at com.sunopsis.jdbc.driver.file.CommandExecutor.executeCommand(CommandExecutor.java:33)
     at com.sunopsis.jdbc.driver.file.FilePreparedStatement.executeUpdate(FilePreparedStatement.java:138)
     at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java:665)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.executeUpdate(SnpSessTaskSql.java:3218)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java:1785)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2805)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java:68)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:322)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:246)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:237)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:794)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:619)

What operating system are you using?
The name of your file has the time within it , you cant have a filename with ':' in it on Windows.
Try using ALPHANUMERIC datatype for the variable and pull the current datetime as a char with something like :
select to_char( sysdate ,'YYYY-MM_DD HHMISS') from dual

Object reference not set to an instance of an object error when generating a schema using flat file schema wizard.

I have a csv file that I need to generate a schema for. I am trying to generate a schema using flat file schema wizard but I keep getting "Object reference not set to an instance of an object." error when I am clicking on the Next button after
specifying properties of the child elements on the wizard. At the end I get schema file generated but it contains an empty root record with no child elements.
I thought may be this is because I didn't have my project checked out from the Visual SourceSafe db first but I tried again with the project checked out and got the same error.
I also tried creating a brand new project and generating a schema for it but got the same error.
I am not sure what is causing Null Reference exception to be thrown and there is nothing in the Windows event log that would tell me more about the problem.
I am using Visual Studio 2008 for my BizTalk development.
I would appreciate if some has any insides on this issue.

Hi,
To test your environment, create a new BizTalk project outside of source control.
Create a simple csv file on the file system.
Name,City,State
Bob,New York,NY
Use the Flat file schema Wizard to create the flat file schema from your simple csv instance.
Validate the schema.
Test the schema using your csv instance.
This will help you determine if everything is ok with you environment.
Thanks,
William

"The attempted operation failed. An object could not be found" error when double clicking on an ics file

Operation System: Windows 8 Pro
System Type: 64-bit Operating System
Office: MS Office Professional Plus 2013
I am getting "The attempted operation failed. An object could not be found" error when I double click on an .ics file to an appointment to my calender. My outlook.com account's data file is set as default and this error only occurs if
that is the default data file. I thought that maybe my profile is corrupted. So, I opened up a new profile with the below steps and only add my outlook.com account there:
1-) Open up the Control Panel and go to Mail section
2-) Click "Show Profiles"
3-) Click "Add" and give a name to your profile.
4-) Configure your outlook.com account (with Auto Account setup, not manual steps)
5-) Finally, set that profile to be used always.
Then, I opened up the Outlook 2013 and clicked on the .ics file to add that appointment but got the same error.
Is this a known issue or specific to me?
Thanks!

yes, I have the same problem.
The workaround of saving the ICS file and then importing it into the current calendar
works,
but the ICS calendar
displays in other section, NOT in the section of my old events.
why ??

Error when using API.DataWindow.Utilities.mShellAndWait: File not found

I am trying to run a simple command using API.DataWindow.Utilities.mShellAndWait, however I am experiencing the following error in FDM web. Strangely, I do not see the same error when the command is run from FDM Workbench:
Error: File not found
At Line: ###
The command is as follows:
Dim strCMD
strCMD = "ECHO %DATE% %TIME% >> \\<servername>\<folder1>\<folder2>\File.Log"
API.DataWindow.Utilities.mShellAndWait strCMD, 0
This command works fine when run directly from the command line. I am using a UNC path so thought this would have worked. Can anyone please suggest how I can resolve this? I have also tried the following and this results in a similar error:
Dim strCMD
strCMD = "ECHO %DATE% %TIME% >> \\<servername>\<folder1>\<folder2>\File.Log"
Set WshShell = CreateObject("WScript.Shell")
Set WshShellExec = WshShell.Exec(strCMD)
Error: The system cannot find the file specified.

I would expect the issue is due to user access priviledges.
When you run it through Workbench, the shell and wait is using your (logged on user's) credentials.
When it operates through the web stie, it is using the service account credentials.
If the service account does not have permissions, that could explain the 'file not found', though I would expect an access is denied error.
$.02

Error when save the query

Hi All,
We have migrated from 3.x to 7.0 (QA). In BEx analyzer when we save the new query the following error message getting.
1. Program GP77SAI0MJZN9QMLKWR6SIGCYYA does not exist
2. An exception with the type CX_SY_PROGRAM_NOT_FOUND occurred, but was neither handled locally, nor declared in a RAISING clause
3. Program error in class SAPMSSY1 method: UNCAUGHT_EXCEPTION
Please help me from this error.
Thanks in Advance
Ravi

Hi,
Check following thread and underlying note..
error when saving a query "CX_SY_PROGRAM_NOT_FOUND"
Abhijeet
Reward pts if useful..

Getting this error when doing a place with oam file

I am getting the following error when uploading a OAM file: muse_manifest.xml. try again latter.
Also is there a better way to have videos play in muse?
Anyone know what this means?
Thanks.
Joe

May i have the screenshot of the exact error ?
Also for videos you may find this widget helpful : Adobe Muse HTML5 Video Player Widget | MuseThemes.com details : Adobe Muse Widget | Customizable HTML5 Video Player

Error when save ERD diagram -an unnamed file contains invalid path

Similar Messages

Maybe you are looking for