Error when saving custom Datasource on R/3

Hi,
I'm creating a transaction datasource using Extraction by Function Module.
I've created & activated the required extract struct (using Tcode: SE11) and the function module.
However after populating these 2 fields in the datasource screen, when i try to save the DS. I get the following error.
Error message : Units field MEINS for field GWERT of DataSource Z_PURCH_SMI_DATA is hidden
Here GWERT is the field of the structure used in DS definition and in it's property i've mentioned MARA.MEINS as reference fields (it is obligatory else error when activating structure).
The structure got activated successfully, but is giving problem in Datasource.
Fyi, similar message is appearing for other fields of the structure.
Any input would be appreciated.
Regards,
Nagendra.

Hi there,
In SE11 where you are creating View or table for Datasource, Just add MEINS field in that as new entry
and for field GWERT in reference fields table, give this MEINS field and reference table should be same table/ View name where you are adding this field.
Regards,
Rajdeep Rane.

Similar Messages

Short dumpt error when saving customer master

Dear all,
When I save customer master record, short dump error occur and error analysis as following:
Error analysis
    Short text of error message:
    Postprocessing Office not activated for synchronization process
    Long text of error message:
     Diagnosis
         The Postprocessing Office (PPO) is not activated for the selected
         synchronization process.
     System Response
         The system cannot create a PPO order.
     Procedure
         Inform your system administrator.
     Procedure for System Administration
         Activate the corresponding business process in Customizing for the
         Postprocessing Office under Activate Creation of Postprocessing
         Orders.
    Technical information about the message:
    Message class....... "MDS_PPO"
    Number.............. 010
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
Any one have same problem before? Please help me to solve this. Thank you very much
Best Regards
Phuong

I have never come across the error "Postprocessing Office not activated for synchronization process".
Anyway, In IMG, navigate to Cross-Application Components --> General Application Functions --> Postprocessing Office --> Business Processes --> Activate creation of Postprocessing Orders.
There check whether the settings are in line with standard SAP requirements but not sure this will solve the issue. Please update.
thanks
G. Lakshmipathi

Error in saving customer information. Value for contact_point_purpose must be a value defined in lookup type CONTACT_POINT_PURPOSE.

I was trying to create a text alert. I was calling following in jsp
email.setContactPointPurpose(myLookUpCode); //say XXMY_SMS_SHIP
PartyManager.createEmail(email, ApiConstant.CONTACT_POINT);
Getting following exception:
Error in saving customer information.
Value for contact_point_purpose must be a value defined in lookup type CONTACT_POINT_PURPOSE.
Error trace:
oracle.apps.ibe.customer.CustomerException: Error in saving customer information. at oracle.apps.ibe.tcav2.Email.create(Email.java:187) at oracle.apps.ibe.tcav2.PartyManager.createEmail(PartyManager.java:116) at _oa__html._myfile__ibeMyFile._jspService(_myfile__ ibeMyFile.java:908) at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119) at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417) at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267) at oracle.jsp.JspServlet.internalService(JspServlet.java:186) at oracle.jsp.JspServlet.service(JspServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:588) at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456) at org.apache.jserv.JServConnection.run(JServConnection.java:294) at java.lang.Thread.run(Thread.java:662) Caused by: oracle.apps.jtf.base.resources.FrameworkException: Value for contact_point_purpose must be a value defined in lookup type CONTACT_POINT_PURPOSE. at oracle.apps.jtf.util.ErrorStackUtil.getFrameworkException(ErrorStackUtil.java:104) at oracle.apps.jtf.util.ErrorStackUtil.getDBFrameworkException(ErrorStackUtil.java:141) at oracle.apps.ibe.tcav2.Email.create(Email.java:185) ... 11 more Error in saving customer information. oracle.apps.jtf.base.resources.FrameworkException: Value for contact_point_purpose must be a value defined in lookup type CONTACT_POINT_PURPOSE. at oracle.apps.jtf.util.ErrorStackUtil.getFrameworkException(ErrorStackUtil.java:104) at oracle.apps.jtf.util.ErrorStackUtil.getDBFrameworkException(ErrorStackUtil.java:141) at oracle.apps.ibe.tcav2.Email.create(Email.java:185) at oracle.apps.ibe.tcav2.PartyManager.createEmail(PartyManager.java:116) at _oa__html._myfile__ibeMyFile._jspService(_myfile__ ibeMyFile.java:908) at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119) at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417) at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267) at oracle.jsp.JspServlet.internalService(JspServlet.java:186) at oracle.jsp.JspServlet.service(JspServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:588) at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456) at org.apache.jserv.JServConnection.run(JServConnection.java:294) at java.lang.Thread.run(Thread.java:662) Value for contact_point_purpose must be a value defined in lookup type CONTACT_POINT_PURPOSE.

Tried this but it is giving the below error
APP-FND-01242: Cannot read value from field PER_ASSIGNMENT_ID
Cause: The field PER_ASSIGNMENT_ID could not be located or read.
Action: This error is normally the result of an incorrectly-entered field name string in a trigger, or a field name string that does not uniquely specify a field in your form. Correct your trigger logic to precisely specify a valid field.

Error when saving

Hello BW Experts,
I am getting this error while saving a query in Bex.
'The query could not saved due to a problem in transport'.
I am actually creating a test query production. I am not sure why it is refering to the transport. From what i understand there is nothing to deal with transports.
Anyone experienced a similar problem before.
Suggestions appreciated.
Thanks,
BWer

OSS NOTE 194051
Symptom
An error occurs when you save a query:
Error when saving
"The query could not be saved due to a problem in transport".
Other terms
Business Explorer, query, transport, save, R9 124
Reason and Prerequisites
There are 4 possible reasons for this problem:
1. The BEx default transport request or the development class-dependent transport request is not maintained or released in the Administrator Workbench.
2. The system is set to "cannot be changed". Refer to Note 337950 (as of 2.0b SP 11), which describes how query objects can be edited in systems that cannot be changed.
3. You are not authorized to write to Workbench requests.
4. The BEx default transport request or the development-class-dependent transport request in the Administrator Workbench has another target system than the query (the transport destination of the query is determined via the transport layer of the query's development class (as of 3.0: of the package)).
The error only occurs for query objects which already have a development class, that means, which were already placed on a transport request.
Solution
Solution for Cause 1:
a) Start the Administrator Workbench
b) Choose 'Goto' to change to Transport connection
c) Choose "Request BEx" or "BEx development classes" in the toolbar.
d) Create a (new) request.
e) All changes in the BEx are now written to this request.The end user is no longer confused by 'Transport' dialog boxes.
Solution for Cause 2:
See Note 337950
Solution for Cause 3:
Authorize user to write to Workbench requests.
Solution for Cause 4:
Create a request for each target system. Assign the request suiting the target system of the transport layer of the development class (of the package) to each development class (as of 3.0: to each package) used for BEX objects.
If this does not change the situation, further information is useful for error analysis.
Go to Transaktion SE16, Table RSZCOMPDIR. In field COMPID, select the technical name of your query. Read the COMPUID of your query.
Go to SE37, function module rso_elem_get_related. Parameter I_IOBJNM is set to the COMPUID, and parameter I_OBJVERS (object version) is set to A. Only the export parameters E_T_OBJ_EXISTENTIAL and E_T_OBJ_DEPENDENT are of interest.
These entries are then entered in function module rs_tr_objects_check_insert in import parameter I_T_TR_OBJECT. In this parameter, fill field PGMID fixed with 'R3TR' and field OBJECT fixed with 'ELEM'. Field OBJ_NAME is filled with the contents of field OBJNM from export parameters E_T_OBJ_EXISTENTIAL and E_T_OBJ_DEPENDENT. The other fields are not relevant.
The export parameters of this function module are required for further error determination. Add this information to your OSS message. The table of messages E_T_MSG is important in particular.

Font licensing error when Saving?

I use Illustrator CC and get a licensing error when saving designs with downloaded fonts.
The designs look fine on my computer and fine when I open them from my drop box account.
The problem comes when others open the design, the fonts change to Arial in most cases, which is causing design issues.
This is even happening when the design is saved as a PDF.
How do I solve this problem?
Can I get licenced fonts?
Where are they available?
Many thanks for reading.

You can have your other contacts download and install the same fonts
or
you can select all the text in your document and create outlines of the fonts, printers often ask for this option.
or
You can purcahse fonts from say Adobe and if I am not mistaken you can have those installed on five work stations, I do not know if you are allowed to consider a colleague as legal user of the fonts. And I do no recall if the number of seats for the fonts have changed but it used to be five seats. As I recall.
or
you can purcahse from My Fonts as well http://www.myfonts.com but again the other contacts ave to have the fonts installed as well check out how many seats for the fonts ypoouare entitled to and if that includes remoe sites for the seats.

Permission error when saving as pdf

I am using 10.6.7 on a Mini and I get a error when saving a documetn as a PDF. It says I don't have permission to save the file.

Hi Arnis,
I have also posted this separately.
Following is the ditamap i am using to create the PDF. This has booktitle, front matter, toc, chapter and backmatter. I am able to generate a PDF (complete with title page, toc, chapter, backmatter, index) using fop 0.25. However, when I try to create a pdf in FM 9.0, I get only the chapter. How can get the others through FM 9.0. Please provide a solution.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE bookmap PUBLIC "-//OASIS//DTD DITA BookMap//EN" "bookmap.dtd" [

<?Fm Validation Off?>

]>
<?Fm Condition DITA-Topicref Blue NO_OVERRIDE show?>
<?Fm Condition FM8_SYSTEM_HIDEELEMENT AsIs NO_OVERRIDE hide?>
<?Fm Condition FM8_TRACK_CHANGES_ADDED Forest%20Green SINGLE_UNDERLINE show?>
<?Fm Condition FM8_TRACK_CHANGES_DELETED Red STRIKETHROUGH show?>
<?Fm BoolCondExpr "" State 0?>
<?Fm TrackChange Off PreviewState PREVIEW_OFF_TRACK_CHANGE?>
<bookmap
    xmlns:ditaarch = "http://dita.oasis-open.org/architecture/2005/">
<booktitle><mainbooktitle>Management</mainbooktitle>
<booktitlealt>Version 4.0</booktitlealt>
<booktitlealt></booktitlealt></booktitle>
<frontmatter><notices></notices>
<booklists><toc navtitle = "Contents"/></booklists>
<preface id = "preface">
<topicref navtitle = "Preface" href = "nm\concepts\nm_Preface.xml"
    type = "concept"><?Fm Condstart DITA-Topicref?><?Fm Condend DITA-Topicref?></topicref></preface></frontmatter>
<chapter navtitle = "Management" href = "nm.ditamap"
    format = "ditamap" id = "chapter"><?Fm Condstart DITA-Topicref?><?Fm Condend DITA-Topicref?></chapter>
<backmatter><booklists><indexlist navtitle = "Index"/></booklists></backmatter></bookmap>

OS 10.6.8, Macbook Pro 3.1 error when saving monitor calibration, cannot save.

Macbook pro 3.1 OS 10.6.8, error when saving monitor calibration profile. Tried to name new profile, or save as an older profile, still got error when attempting to save.

Try a NVRAM reset, and then go through the monitor calibration again.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the third time.
Release the keys.

Error when saving an Outlook attachment eg. Word Doc after opening it.

we made the group policy change which was giving an error when saving from opened attached files.
But for 1 particular RDS user the error still seems to be occurring. i've tried the following,
1. recreating outlook.
2. recreating user profile.
3. deleted the group policy history from the registry.
4. tried removing outlook add-ins.
your help would be really appreciated.
kind regards

Hi,
What is the error? Does outlook crash? Would you please also detail the group policy change?
We can try cleaning out the Temporary Outlook Files folder to check the result.
We can refer to the following link for the detailed steps to locate and find the temp folder:
http://www.howto-outlook.com/faq/securetemp.htm
Then we need to use OutlookTempCleaner to clean the folder:
http://www.howto-outlook.com/products/outlooktempcleaner.htm
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
Melon Chen
TechNet Community Support

Error when Saving Files ID=-39

We are using CS5 on iMac and get the following error when saving:
Can't save preview, but all other information was saved successfully. The file ended unexpectedly. Try using a backup copy. ID = -39
Generally after receiving this error the file is corrupt.
What can we do? Do you need more info? I am not sure what to do with this error.

Most probably that is your problem.
Try if saving to your hard disk solves your problem.

Invalid image error when saving to pdf

I keep getting an invalid image error when saving a MS Publisher file as a pdf. Can anyone help with solving this issue?

You need to provide system and version info and explain how you actualyl produce the PDF. Unless you use the Acrobat PDF printer, I don't see how Adobe software would be involved in any of this, as recent versions of MS Office products can save PDFs natively...
Mylenium

APP-AR-11526 ERROR WHEN SAVING ADJUSTMENT IN AR RECEIPTS FORM

제품 : FIN_AR
작성날짜 : 2003-04-25
APP-AR-11526 ERROR WHEN SAVING ADJUSTMENT IN AR RECEIPTS FORM.
==============================================================
PURPOSE
Problem Description
Receipt화면에서 Adjustment를 하고 Save버튼을 누를때,
APP-AR-11526 arp_process_adjustment.insert adjustment exception ORA-20001
위와 같은 에러 발생.
Workaround
select taxable_amount
from RA_CUSTOMER_TRX_LINES_ALL
where customer_trx_id = 문제가되는 transaction id
and line_type='TAX';
NULL
Update RA_CUSTOMER_TRX_LINES_ALL
set taxable_amount = transaction의 원래 금액
where customer_trx_id = 문제가되는 transaction id
and line_type='TAX';
Solution Description
RA_CUSTOMER_TRX_LINES_ALL의 taxable_amount값이 NULL인 경우,
invoice 금액 adjustment시 오류가 발생한다.
Reference Documents
-------------------

Pl see if MOS Doc 341469.1 (Adjustment Entry: APP-AR-96027: Tax accounting not defined for the tax code or tax location assigned to this invoice) can help.
HTH
Srini

Unresponsive Script Error when Saving Changed Set in Flickr Organizer

I'm getting an unresponsive script error when saving a changed set in the Flickr organizer.
The problem started when using Firefox 3.6.8 or maybe an earlier version. It persists in Firefox 3.6.12
I've noticed the error only appears in the Organizer and only when saving a changed set or saving after deleting a set.
It does indeed save the changed set correctly before crashing.
It is not intermittent and happens every time I perform this save.
The error does not occur in Chrome or Safari.
Examples of the error messages can be found at
http://www.flickr.com/photos/blazer8696/4897580573/
and
http://www.flickr.com/photos/blazer8696/4897656175/

Upgrading to 4.0.1 has corrected this problem.

SNP Optimizer run ends with error: Error when determining Customizing data

Hi All
Can you help please what settings are missing: SNP optimizer run canceled with error "Error when determining Customizing data".
Thanks
Best Regards
Andrey

On integration tab of SNP optimizer profile,
maintain 'regard as customer demand' for both dependent demands and distribution demands for fixed orders.
By default it is 'regard as hard constraint' which should be changed.
bye,
Nitin Thatte

HUH? Error when saving

We are getting a HUH? Error when saving certain files. Once this error shows up, it will save the document, but will a
lways come up when you resave. It only happens on some documents
We are on a network and share files, but everyone is working in CS4

I have been having this issue on one system. I get an "Unexpected Error cannot save file" when trying to save in any format.
This happens when saving across the network or locally.
(CS3 Vista)
We have been living with this problem since the beginning. We simply do not work on this computer in Illustrator for this reason.

Error when saving a default format for a date field in 11g

Getting this error when attempting to save the default for a date field in 11g:
The current xml is invalid with the following errors: Bad xml instance! <?xml version="1.0"?> <sawsavedformat:metadata xmlns:sawsavedformat="com.siebel.analytics.web/savedformat/v1.1"><sawsavedformat:columnSavedFormats><sawsavedformat:columnSavedFormat xmlns:saw="com.siebel.analytics.web/report/v1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="sawsavedformat:regularColumnSavedFormat" columnName=""Retrospectives"."Time Dim"."Two Months Ago""><saw:displayFormat><saw:formatSpec suppress="suppress" wrapText="true" visibility="visible" hAlign="left" vAlign="top"><saw:dataFormat xsi:type="saw:custom" customFormat="MMMM dd, yyyy" displayTimeZone=""/></saw:formatSpec></saw:displayFormat><saw:tableHeading><saw:displayFormat><saw:formatSpec/></saw:displayFormat></saw:tableHeading><saw:columnHeading><saw:displayFormat><saw:formatSpec/></saw:displayFormat></saw:columnHeading></sawsavedformat:columnSavedFormat></sawsavedformat:columnSavedFormats></sawsavedformat:metadata>
Line:2, Col:608, Attribute 'displayTimeZone' is not declared for element 'dataFormat'
Thoughts and suggestions?

I have a Support Request open with Oracle right now (it's taking a few weeks to resolve) but here's the update:
OBIEE 10g handles DATE types differently than 11g. Both the support rep and I can't figure out how, but they are different. If you bring the column in as a DATETIME in your Physical Layer you can't save it system-wide, even if you do set a time zone for your account (My Account -> Preferences -> Time Zone). If you bring the column in as DATE you can save it system-wide but you can't display the hours/mins/secs, only the M/D/Y. This has been tested on a 9i and 10g database and produced the same thing on both. The problem never occurred with those same columns using OBIEE 10g.
Oracle support has not fully admitted this as a bug, but the rep working on this SR said this will probably be fixed in the next release- 11.1.1.4, which is due out late Jan/early Feb of this year. He is trying to reproduce this so he can log it as a bug (which we all are hoping for!) so Oracle can address it.
For now, I've found that you are stuck with two options: 1) bring the column in as a DATE, display it system-wide as a saved format, but you can't show the time, and 2) don't save that date value with a system-wide formatting and set it manually on every report you need a custom format (don't forget to set your time zone).
If I hear anything more back from Oracle support I'll update this thread.
Sorry guys, looks like we're all stranded on this one...

Error when saving custom Datasource on R/3

Similar Messages

Maybe you are looking for