Error when saving ESS Time sheet.
Hello Friends we are receiving the following errror while saving timesheet.
1. We have checked roles and authorization , it is fine
2. His CRV profile is maintianed coreectly
Could you please let us know how to fix this error.
1
Edit
2
Review and Save
3
Completed
18.06.2010: You are not authorized to enter attendance/absence 1000 for personnel no.
18.06.2010: Record cannot be saved because no. of hours = 0
17.06.2010: You are not authorized to enter attendance/absence 1000 for personnel no.
17.06.2010: Record cannot be saved because no. of hours = 0
16.06.2010: You are not authorized to enter attendance/absence 1000 for personnel no.
16.06.2010: Record cannot be saved because no. of hours = 0
15.06.2010: You are not authorized to enter attendance/absence 1000 for personnel no.
15.06.2010: Record cannot be saved because no. of hours = 0
14.06.2010: You are not authorized to enter attendance/absence 1000 for personnel no.
14.06.2010: Record cannot be saved because no. of hours = 0
Erroneous records exist. Navigation is not possible
Show Worklist Show Calendar Show Time Accounts
Extended Help:SUPPORT LINKProfile:Z0000031
Weekly View
Daily View
Hi,
It is probably you don't have authorization to the IT 2001/ 2002.
- Check your profile on ECC (Objetcs P_PERNR, P_ORGIN)
- Try to record the same absences/attendances by CAT2.
Cheers,
Sílvio Galery
Similar Messages
-
ESS Time Sheet Entry Error - "critical error, data has been lost"
I tried saving his time sheet data on the ESS . I noticed that when I went back to check on the draft, Draft has no longer exists or had any information. When I tried to find the draft, I got the message "critical error, data has been lost"
Can any one help on this issue if faced.Hello,,
Are you able to enter time on the backend via Cat2, for example?
Please provide further details for the community to assist you.
Details like:
- Which ERP version are you running?
- Do I have any dumps or logs on ST22 and SLG1?
Thank you. -
Macbook pro 3.1 OS 10.6.8, error when saving monitor calibration profile. Tried to name new profile, or save as an older profile, still got error when attempting to save.
Try a NVRAM reset, and then go through the monitor calibration again.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the third time.
Release the keys. -
Unresponsive Script Error when Saving Changed Set in Flickr Organizer
I'm getting an unresponsive script error when saving a changed set in the Flickr organizer.
The problem started when using Firefox 3.6.8 or maybe an earlier version. It persists in Firefox 3.6.12
I've noticed the error only appears in the Organizer and only when saving a changed set or saving after deleting a set.
It does indeed save the changed set correctly before crashing.
It is not intermittent and happens every time I perform this save.
The error does not occur in Chrome or Safari.
Examples of the error messages can be found at
http://www.flickr.com/photos/blazer8696/4897580573/
and
http://www.flickr.com/photos/blazer8696/4897656175/Upgrading to 4.0.1 has corrected this problem.
-
Error while saving service entry sheet
Hi Gurus
I m getting the following error while saving service entry sheet
Account determination for entry MGCA WRX not possible
Req. for help
EldeeHi,
Use T.code:OMWB,
Enter Chart of Account,Now you will have new screen,
Click WRX, sys will take to new screen
Click Rules,select check box of debit and credit only and save.
Now enter you G/L accounts(GR/IR) in debit and credit field and save.
Now try your transaction.
If helpful to you then reward.
Regards,
Biju K -
Hello BW Experts,
I am getting this error while saving a query in Bex.
'The query could not saved due to a problem in transport'.
I am actually creating a test query production. I am not sure why it is refering to the transport. From what i understand there is nothing to deal with transports.
Anyone experienced a similar problem before.
Suggestions appreciated.
Thanks,
BWerOSS NOTE 194051
Symptom
An error occurs when you save a query:
Error when saving
"The query could not be saved due to a problem in transport".
Other terms
Business Explorer, query, transport, save, R9 124
Reason and Prerequisites
There are 4 possible reasons for this problem:
1. The BEx default transport request or the development class-dependent transport request is not maintained or released in the Administrator Workbench.
2. The system is set to "cannot be changed". Refer to Note 337950 (as of 2.0b SP 11), which describes how query objects can be edited in systems that cannot be changed.
3. You are not authorized to write to Workbench requests.
4. The BEx default transport request or the development-class-dependent transport request in the Administrator Workbench has another target system than the query (the transport destination of the query is determined via the transport layer of the query's development class (as of 3.0: of the package)).
The error only occurs for query objects which already have a development class, that means, which were already placed on a transport request.
Solution
Solution for Cause 1:
a) Start the Administrator Workbench
b) Choose 'Goto' to change to Transport connection
c) Choose "Request BEx" or "BEx development classes" in the toolbar.
d) Create a (new) request.
e) All changes in the BEx are now written to this request.The end user is no longer confused by 'Transport' dialog boxes.
Solution for Cause 2:
See Note 337950
Solution for Cause 3:
Authorize user to write to Workbench requests.
Solution for Cause 4:
Create a request for each target system. Assign the request suiting the target system of the transport layer of the development class (of the package) to each development class (as of 3.0: to each package) used for BEX objects.
If this does not change the situation, further information is useful for error analysis.
Go to Transaktion SE16, Table RSZCOMPDIR. In field COMPID, select the technical name of your query. Read the COMPUID of your query.
Go to SE37, function module rso_elem_get_related. Parameter I_IOBJNM is set to the COMPUID, and parameter I_OBJVERS (object version) is set to A. Only the export parameters E_T_OBJ_EXISTENTIAL and E_T_OBJ_DEPENDENT are of interest.
These entries are then entered in function module rs_tr_objects_check_insert in import parameter I_T_TR_OBJECT. In this parameter, fill field PGMID fixed with 'R3TR' and field OBJECT fixed with 'ELEM'. Field OBJ_NAME is filled with the contents of field OBJNM from export parameters E_T_OBJ_EXISTENTIAL and E_T_OBJ_DEPENDENT. The other fields are not relevant.
The export parameters of this function module are required for further error determination. Add this information to your OSS message. The table of messages E_T_MSG is important in particular. -
Font licensing error when Saving?
I use Illustrator CC and get a licensing error when saving designs with downloaded fonts.
The designs look fine on my computer and fine when I open them from my drop box account.
The problem comes when others open the design, the fonts change to Arial in most cases, which is causing design issues.
This is even happening when the design is saved as a PDF.
How do I solve this problem?
Can I get licenced fonts?
Where are they available?
Many thanks for reading.You can have your other contacts download and install the same fonts
or
you can select all the text in your document and create outlines of the fonts, printers often ask for this option.
or
You can purcahse fonts from say Adobe and if I am not mistaken you can have those installed on five work stations, I do not know if you are allowed to consider a colleague as legal user of the fonts. And I do no recall if the number of seats for the fonts have changed but it used to be five seats. As I recall.
or
you can purcahse from My Fonts as well http://www.myfonts.com but again the other contacts ave to have the fonts installed as well check out how many seats for the fonts ypoouare entitled to and if that includes remoe sites for the seats. -
Ess Time Sheet and Attendance Web Dynpro - ABAP or JAVA
We are determining the resources we will be needing for the HR - ESS Time Sheet and Attendance Module.
What is this module written in. ABAP Web Dynpro or Java Web Dynpro.
Many thanks,
Multiple replies welcome.
KenThe ESSTimeSheet is now called Record Working Time & for now it is still in WebDynpro JAVA.. looking at how complex the whole application is, it will really take some beating to rewrite the same in WDA.
~Suresh -
Permission error when saving as pdf
I am using 10.6.7 on a Mini and I get a error when saving a documetn as a PDF. It says I don't have permission to save the file.
Hi Arnis,
I have also posted this separately.
Following is the ditamap i am using to create the PDF. This has booktitle, front matter, toc, chapter and backmatter. I am able to generate a PDF (complete with title page, toc, chapter, backmatter, index) using fop 0.25. However, when I try to create a pdf in FM 9.0, I get only the chapter. How can get the others through FM 9.0. Please provide a solution.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE bookmap PUBLIC "-//OASIS//DTD DITA BookMap//EN" "bookmap.dtd" [
<!-- Begin Document Specific Declarations -->
<?Fm Validation Off?>
<!-- End Document Specific Declarations -->
]>
<?Fm Condition DITA-Topicref Blue NO_OVERRIDE show?>
<?Fm Condition FM8_SYSTEM_HIDEELEMENT AsIs NO_OVERRIDE hide?>
<?Fm Condition FM8_TRACK_CHANGES_ADDED Forest%20Green SINGLE_UNDERLINE show?>
<?Fm Condition FM8_TRACK_CHANGES_DELETED Red STRIKETHROUGH show?>
<?Fm BoolCondExpr "" State 0?>
<?Fm TrackChange Off PreviewState PREVIEW_OFF_TRACK_CHANGE?>
<bookmap
xmlns:ditaarch = "http://dita.oasis-open.org/architecture/2005/">
<booktitle><mainbooktitle>Management</mainbooktitle>
<booktitlealt>Version 4.0</booktitlealt>
<booktitlealt></booktitlealt></booktitle>
<frontmatter><notices></notices>
<booklists><toc navtitle = "Contents"/></booklists>
<preface id = "preface">
<topicref navtitle = "Preface" href = "nm\concepts\nm_Preface.xml"
type = "concept"><?Fm Condstart DITA-Topicref?><?Fm Condend DITA-Topicref?></topicref></preface></frontmatter>
<chapter navtitle = "Management" href = "nm.ditamap"
format = "ditamap" id = "chapter"><?Fm Condstart DITA-Topicref?><?Fm Condend DITA-Topicref?></chapter>
<backmatter><booklists><indexlist navtitle = "Index"/></booklists></backmatter></bookmap> -
No Drop-Down in One Field of ESS Time Sheet
Hi All,
We are facing an issue with ESS, Activity type Dropdown values are coming in CAT2 but being not in ESS time sheet. Drop-down for all other values, eg network, receiving cost center etc., are displayed in ESS.
Can you please suggest what could be the reason behind it.
Cheers!!!
UmangHello Umang
We are also faced similar kind of issue.
For that Network, activity type should be configured that should have enough permission for that PERN (means user).
My suggesion it is issue with back configuration.
BR
Sridhar S -
Error when saving an Outlook attachment eg. Word Doc after opening it.
we made the group policy change which was giving an error when saving from opened attached files.
But for 1 particular RDS user the error still seems to be occurring. i've tried the following,
1. recreating outlook.
2. recreating user profile.
3. deleted the group policy history from the registry.
4. tried removing outlook add-ins.
your help would be really appreciated.
kind regardsHi,
What is the error? Does outlook crash? Would you please also detail the group policy change?
We can try cleaning out the Temporary Outlook Files folder to check the result.
We can refer to the following link for the detailed steps to locate and find the temp folder:
http://www.howto-outlook.com/faq/securetemp.htm
Then we need to use OutlookTempCleaner to clean the folder:
http://www.howto-outlook.com/products/outlooktempcleaner.htm
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
Melon Chen
TechNet Community Support -
Error when Saving Files ID=-39
We are using CS5 on iMac and get the following error when saving:
Can't save preview, but all other information was saved successfully. The file ended unexpectedly. Try using a backup copy. ID = -39
Generally after receiving this error the file is corrupt.
What can we do? Do you need more info? I am not sure what to do with this error.Most probably that is your problem.
Try if saving to your hard disk solves your problem. -
Invalid image error when saving to pdf
I keep getting an invalid image error when saving a MS Publisher file as a pdf. Can anyone help with solving this issue?
You need to provide system and version info and explain how you actualyl produce the PDF. Unless you use the Acrobat PDF printer, I don't see how Adobe software would be involved in any of this, as recent versions of MS Office products can save PDFs natively...
Mylenium -
APP-AR-11526 ERROR WHEN SAVING ADJUSTMENT IN AR RECEIPTS FORM
제품 : FIN_AR
작성날짜 : 2003-04-25
APP-AR-11526 ERROR WHEN SAVING ADJUSTMENT IN AR RECEIPTS FORM.
==============================================================
PURPOSE
Problem Description
Receipt화면에서 Adjustment를 하고 Save버튼을 누를때,
APP-AR-11526 arp_process_adjustment.insert adjustment exception ORA-20001
위와 같은 에러 발생.
Workaround
select taxable_amount
from RA_CUSTOMER_TRX_LINES_ALL
where customer_trx_id = 문제가되는 transaction id
and line_type='TAX';
NULL
Update RA_CUSTOMER_TRX_LINES_ALL
set taxable_amount = transaction의 원래 금액
where customer_trx_id = 문제가되는 transaction id
and line_type='TAX';
Solution Description
RA_CUSTOMER_TRX_LINES_ALL의 taxable_amount값이 NULL인 경우,
invoice 금액 adjustment시 오류가 발생한다.
Reference Documents
-------------------Pl see if MOS Doc 341469.1 (Adjustment Entry: APP-AR-96027: Tax accounting not defined for the tax code or tax location assigned to this invoice) can help.
HTH
Srini -
We are getting a HUH? Error when saving certain files. Once this error shows up, it will save the document, but will a
lways come up when you resave. It only happens on some documents
We are on a network and share files, but everyone is working in CS4I have been having this issue on one system. I get an "Unexpected Error cannot save file" when trying to save in any format.
This happens when saving across the network or locally.
(CS3 Vista)
We have been living with this problem since the beginning. We simply do not work on this computer in Illustrator for this reason.
Maybe you are looking for
-
Formatting excel using 'SO_NEW_DOCUMENT_ATT_SEND_API1'
Hi, I am having an issue in formatting excel content while sending as an attachment through a mail. I am using the FM 'SO_NEW_DOCUMENT_ATT_SEND_API1'. I am getting an excel output as an attachment with the mail, but I would like to do formatting t
-
How do I reinstall some software from the cd that came with my Mac? Have tried to reinstall but when I choose customize it brings up the whole bundle for install. Thank you
-
How to do join in BMM layer.
Hi Guys, i am using Argus safety application for analytics. i need some help. here i am explaining my scenario. CASE_MASTER is my main fact table. Dim_Prefferd_Term (1)-------------(M) Map_PrefferedTerm_CaseId (M)----------------- (1) Case_master (1)
-
Is there a way to open an MP3 stream and write it to a file? A java based way to record internet radio for later listens?
-
I installed Solaris 2.7 on this laptop but none of the Toshiba screen types work under kdmconfig. As such, CDE does not launch. Will Solaris 8 have support for this laptop? Thanks.