Error when Scheduling a Cristal Report versus an Excel Table.

The excel book is located in a folder at the Infoview server.
The report has been published at the  Infoview   
If I use the u2018u2019u2019viewu2019u2019u2019 link at infoview I obtain the results ok.  (Iu2019m not asked for any user/pw)
But
If I try to schedule the report, I always obtain an Error, because it needs a user/pw   
(Error en archivo E:Archivos de programaBusiness ObjectsBusinessObjects Enterprise 11.5DataprocSchedservername.reportjobserver~tmp1da060de63d6960.rpt: No se puede conectar: parámetros de conexión incorrectos. )
Which user/pw does the system ask for?
Thanks!

Hello,
Just to let you know we figured this one out.  At some point I'd installed Crystal Reports Designer XI R1 on the server (must have service packed it as well).  This is a good thing as it's helped troubleshoot various connection issues etc.
However this overwrote the prompt.dll file, the version of the new file was 11.0.0.2478.  I've since installed Business Objects XI R1 on my local machine without Crystal Reports to see what the version of the prompt.dll file would be.  It was 11.0.0.1282 so I replaced the newer prompt.dll with the older one and problem fixed.
Cheers,
Chris

Similar Messages

  • Getting error when schedule a webi report

    Hi All,
    I am getting error "Cannot initialize Report Engine server. (Error: RWI 00226) Error: INF) while schedule a Webi report.
    Could anyone help me regarding the error?
    Regards

    Hai
    Check this Links
    http://www.sap-forum.org/f22/smtp-error-when-scheduling-webi-report-t483/
    http://www.businessobjectstips.com/tips/server/sizing-limits-to-web-intelligence-report-server-maximum-simultaneous-connections/

  • Timout error when schedule a large report

    I received a timeout error when I scheduled a large report. To refresh and save it as an excel file, and then send to a file location. I can do that with a small report. Could I change the setting somewhere to increase the bach process time? Thanks!
    Failed
    External Destination:     File copy the instance with the filename: "Inventory Usage STE2008-11-20-11-48-52.xls" to the directory: "//osh_fs/share/Inventory Usage Report/STE" .
    Creation Time:     11/20/2008 11:48 AM
    Start Time:     11/20/2008 11:48 AM
    End Time:     11/20/2008 12:08 PM
    Server Used:     oshbo1.Web_IntelligenceJobServer
    Error Message:     Transport error: No response from server, timeout exceeded.

    Hi,
    For scheduling a lrage webi report:
    Go into the CCM, and then Stop the Input, Output, WebI Job Server.
    In the Command line of WebI Job Server :
    Before -restart add " -requestTimeout 7200000"
    i.e: ......procwebi -requestTimeout 7200000 -restart.........
    In the Input FRS:
    Do the same as above.
    ........ -requestTimeout 7200000 -restart......
    In the Output Server do the same as well: add -requestTimeout 7200000 before -restart.
    Start all the servers.
    -Shreyash.

  • Error when launching Crystal XIR2 report ..."Table could not be found."

    We have a customer that sees an error when launching any report in InfoView for Crystal Server XIR2:
    Description: Error in File E:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Data\slvnsb41.pageserver\slvnsb41.pageserver\child.2\temp\procReportTemp\mgrTemp\ps_13ec5b68e6bfbc0.rpt: The table could not be found.
    These steps have been taken:
    1) The Crystal Server Business View install and BIAR file imports are successful.
    2) Database connection has been configured and tested.
    3) All the tables are browseable in the Business View Manager and contain data.
    4) All the required tables exist in the database.
    Options or suggestions anyone?

    Can someone tell me how to open this as a SUPPORT CASE that someone will actually help solve? 
    Sorry to say but I don't find these forums of much use.

  • Getting server error. CrystalEnterprise.Smtp:  error when scheduled a webi

    Getting server error. CrystalEnterprise.Smtp:  error when scheduled a webi report to save as excel and send to an email account. What things to look for?

    yes you should read the administration documents,
    go to CMC, find "servers"
    then  "destination job server"
    then click the "destination " tab
    you will find some parameters, you have to configure it you.
    the same scenario will be done to the "web intelligence job server"
    good luck
    Amr

  • Error message "Error when scheduling the query(JOB_CLOSE)".

    Hi all,
    While using query extractor (rscrm_bapi) I am getting error message "Error when scheduling the query(JOB_CLOSE)".
    Could you please find what this error is?
    Thanks,
    Uday.

    Hi Uday,
    This problem can occur if you changed the query definition.
    In this case the query definition would be inconsistent with the existing extract structure.
    Certain Meta information is maintained with each extract defined using the RSCRM_BAPI. If the definition of the query is changed and you need to use the same extract table then you need to delete the extract using the report RSCRMBW_DEL_ALL_EXTRACTS selecting the extract you want
    to delete.
    After this you could use the same table name for any further extract that you need to create.
    One caution is that the extract table should not be deleted through any other transaction before you run the report.
    Rgds,
    Colum

  • Error when scheduling job (JOB_SUBMIT) when execute PC in WAD

    Dear BIers,
      I execute a Process Chain in commond button of WAD, however, I got the error message:
      Job BI_PROCESS_DTP_LOAD could not be scheduled. Termination with returncode 8
      Returncode '8' means ' Error when scheduling job (JOB_SUBMIT).
    Any suggestions are appreciated.
    B.R
    Gerald

    Dear Raju,
    Have you checked SM21? Maybe you have a problem with your TemSe object. If this is the case a basis guy should know how to handle it.
    Greetings,
    Stefan

  • Getting the MDX query select error when running a webi report on BI query

    Getting the following error when running a webi report on BI query :
    A database error occured. The database error text is: The MDX query SELECT  { [Measures].[D8JBFK099LLUVNLO7JY49FJKU] }  ON COLUMNS , NON EMPTY [ZCOMPCODE].[LEVEL01].MEMBERS ON ROWS FROM [ZTEST_CUB/REP_20100723200521]  failed to execute with the error Unknown error. (WIS 10901).
    I have gone through many threads related to this error. But not able find the steps to follow for resoultion.
    Please help in this regard.
    Thanks,
    Jeethender

    The Fix Pack is also for Client Tools--it is a separate download.  Please see the text below for ADAPT01255422
    ADAPT01255422
    Description:
    Web Intelligence generates an incorrect MDX statement when a characteristic and a prompt are used.
    The following database error happens: "The MDX query ... failed to execute with the error
    Unknown error (WIS 10901)."
    New Behavior:
    This problem is resolved.
    This information is also available in the Fixed Issues document for any Fix Pack greater than 2.2.

  • Error 500 Internal Server Error" When Generating Hyperion Financial Reports in PDF Format

    We are unable to open pdf reports in Workspace with the following error. It was all working fine and doesn't work now for unknown reasons.
    Error 500 Internal Server Error" When Generating Hyperion Financial Reports in PDF Format
    We are on 11.1.2.1 environment. Ghost Script 8.54 and Java heap settings xms256m and xmx512m.
    Please advice.

    hello,
    just to clarify
    a) the parameter is named DESFORMAT not :DESFORMAT, there is
    no : in front of the name, if you submit it via URL !
    b) there are some issues with acrobat5 and IE but those are not
    only caused by PDFs generated with oracle reports.
    regards,
    the oracle reports team --pw                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Win 7 automation error when running crystal 10 reports

    I am getting automation and memory type errors when running crystal 10 reports through a VB6 application on WIN 7 32 bit PC...
    does not happen on all win7 PCs, in fact, the reporting will work for a time and then errors, but once getting the errors, seems like the reports will not run again.

    Honestly, not a clue. I've never even thought of putting CR 10 (designer or runtime) on WIN 7. Now I assume this is not CR 10.5 (bundles with .NET 2008).
    See [this|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567] wiki.
    Ludek

  • Error when I deploy a report on crystal reports server 2008 V1.

    Hi ,
    I am getting below error when I deploy a report on crystal reports server 2008 V1. I have installed the crystal server on Linux machine.
    "A server communication error occurred. All servers with kind rptappserver could be down or disabled by the administrator. "
    Please help.
    Thanks,

    Hi
    use the Universe Designer (designer.exe).
    Regards,
    Stratos

  • Page Not Found Error when clicking on Crystal Report Viewer print icon

    Hi,
        I am working with ASP.NET 2.0 and crystla reportXI release2.
        I am getting "Page Can not be Found " error when clicking on Crystal Report Viewer print icon.
        Could you please tell me how to get rid of this error?
    Regards,
    Smitha

    This sounds like a postback issue. Does your application handle postback by putting the report in session?
    There is a [sample|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/CrystalReports_dotNET_SDK/crsdk_samples_aspx/data/crsdk_net_tutorials_115_en.zip] to look at on our website. It was created with Crystal Reports XI R2 and Visual Studio .NET but the code will be the same.
    A short pseudocode would be something like this:
    Dim rptDocument As ReportDocument
    If Not Me.IsPostBack or Session("Report") = Nothing Then
    rptDocument = New ReportDocument
    rptDocument.Load(sGlobalPath & "\myreport.rpt";)
    Ludek

  • Getting Compilation error when used SET or MULTISET operator on nested tabl

    Dear All,
    I am getting Compilation error when used SET or MULTISET operator on nested tables inside a procedure.
    This is working fine in other DB installations of 10g but does not work in another 10g DB.
    it says "wrong number of parameter or datatype used in SET"
    Can any one suggest what went wrong here?
    Thanks in advance.

    Can any one suggest what went wrong here?Only if you would post the query and Oracle versions on both databases.
    Besides, this forum deals with issues in Oracle product installation. So post this query in SQL PL/SQL forum for better response.

  • Compilation error when used SET or MULTISET operator on nested tables

    Dear All,
    I am getting Compilation error when used SET or MULTISET operator on nested tables inside a procedure.
    This is working fine in other DB installations of 10g but does not work in another 10g DB.
    it says "wrong number of parameter or datatype used in SET"
    Can any one suggest what went wrong here?
    Thanks in advance.

    Hi,
    Thanks for ur reply...
    Since MULTISET and SET operators are the new additions in base 10g release for manipulation of nested tables data, I am surprised that same is working in similar 5 DBs installations with 10.2.0.1.0 version, but does not work in the sixth.
    SET and MULTISET operators are used inside the PL/SQL procedure which is getting compiled in the above mentioned 5 DBs but not in sixth DB.
    it gives
    On line: 3112
    PLS-00306: wrong number or types of arguments in call to 'SET'
    Hope this clarifies the issue...

  • Error when scheduling WebI reports in Infoview

    When I shedule WebI reports in Infoview I get the error message "The target program that is required for the task i inactivated".
    First I choose the report that I want to schedule. Then I rightclick and choose "Shedule" and choose "Send To" and any of the choises. The I get the error message in the subject.
    We use:
    -BO XI 3.1 SP3
    On my client:
    -IE 7.0.573013 or Firefox 3.0
    -Win XP
    -Java 1.5
    How can I get the sheduling up and running?

    Hi All,
    I want a run my report once by scheduling, so i provide a time interval for scheduling a report
    start date/ time : 11:38:AM 10/30/2011
    end date/time : 11:43:AM 10/30/2011
    after completion of end time....report is failed and fetching an error
    Error : Object could not be scheduled within the specified time Interval
    Any solution for resolving this error

Maybe you are looking for