Error when scheduling an infopackage
Gurus,
when I try to schedule an infopackage, the system prompts the following error:
@5C@ 02.08.2006 11:29:20 Data target '0BBP_QUO ' removed from list of loadable targets; not loadable RSM 33
@5D@ 02.08.2006 11:29:20 Data target '0BBP_QUO ' does not belong to BWAPPL 'BI'; data target not loadable RSM 34
I've tried to reinstall the related objetcs from the BCT and the problem continues. Could someone help me? Thanks
Hello Thiago. Were you able to fix the bug. I'm getting the same error. I tried the solution suggested it dont seem to work..
Wondering if u were able to fix.
Pl let me know.
thanks
mayil
<removed by moderator>
Edited by: Siegfried Szameitat on Jan 19, 2009 5:15 PM
Similar Messages
-
Error when scheduling the infopackage for loading Master data attributes
Hi,
Iam getting the following error message when scheduling this Master data Attributes ZIP_0PLANT_ATTR_FULL..( Flexible update of Master data info objects)..
In Data load monitor error i got this following error message.
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update rules
ThanksHI,
A caller 01, 02 or equal to or greater than 20 contains an error meesage This is an Idoc error. Please check the Idocs :
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
Also see if there is any 'sysfail' for any datapacket in SM37.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
5) Check in SM58 and BD87 for pending tRFCs and IDOCS.
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
SM21 - System log can also be helpful.
Thanks,....
Shambhu -
Error message "Error when scheduling the query(JOB_CLOSE)".
Hi all,
While using query extractor (rscrm_bapi) I am getting error message "Error when scheduling the query(JOB_CLOSE)".
Could you please find what this error is?
Thanks,
Uday.Hi Uday,
This problem can occur if you changed the query definition.
In this case the query definition would be inconsistent with the existing extract structure.
Certain Meta information is maintained with each extract defined using the RSCRM_BAPI. If the definition of the query is changed and you need to use the same extract table then you need to delete the extract using the report RSCRMBW_DEL_ALL_EXTRACTS selecting the extract you want
to delete.
After this you could use the same table name for any further extract that you need to create.
One caution is that the extract table should not be deleted through any other transaction before you run the report.
Rgds,
Colum -
Error when scheduling job (JOB_SUBMIT) when execute PC in WAD
Dear BIers,
I execute a Process Chain in commond button of WAD, however, I got the error message:
Job BI_PROCESS_DTP_LOAD could not be scheduled. Termination with returncode 8
Returncode '8' means ' Error when scheduling job (JOB_SUBMIT).
Any suggestions are appreciated.
B.R
GeraldDear Raju,
Have you checked SM21? Maybe you have a problem with your TemSe object. If this is the case a basis guy should know how to handle it.
Greetings,
Stefan -
Getting error when schedule a webi report
Hi All,
I am getting error "Cannot initialize Report Engine server. (Error: RWI 00226) Error: INF) while schedule a Webi report.
Could anyone help me regarding the error?
RegardsHai
Check this Links
http://www.sap-forum.org/f22/smtp-error-when-scheduling-webi-report-t483/
http://www.businessobjectstips.com/tips/server/sizing-limits-to-web-intelligence-report-server-maximum-simultaneous-connections/ -
Getting server error. CrystalEnterprise.Smtp: error when scheduled a webi
Getting server error. CrystalEnterprise.Smtp: error when scheduled a webi report to save as excel and send to an email account. What things to look for?
yes you should read the administration documents,
go to CMC, find "servers"
then "destination job server"
then click the "destination " tab
you will find some parameters, you have to configure it you.
the same scenario will be done to the "web intelligence job server"
good luck
Amr -
Error while scheduling in infopackage!!
Heya all,
i need immediate help in this area.Plz help me out.I am having these problems
I created infoobjects IO_MATNO(from fufu book example)and created 2 infopackage 1 for attr and another for text and tried loading them.Everything went well and got activated but when i tried scheduling it said data requested..i clicked monitor and then it showed me yellow light with 3 warnings saying:
Error when updating Idocs in Business Information Warehouse
Diagnosis
Errors have been reported in Business Information Warehouse during IDoc update:
EDI: Partner profile not available
System response
There are IDocs with incorrect status.
Procedure
Check the IDocs in Business Information Warehouse . You can get here using the BW Monitor.
Removing errors:
How you remove the errors depends on the error message you receive.
Can anyone tell me why this is happening?Should i proceed further ignoring this as it is only warning sign or how shld i rectify this?
Immediate help is appreciated.
ThanksHi,
Thanks for the reply but it didn't help me at all as i can't understand the error at all.It says
Overall status:Errors occured:or:missing messeges:
Request(messeges):Everything ok
Data request arranged
Confirmed with:OK
Extraction messeges:Missing messeges {This is yellow)
Transfer(IDOCS and TRFC):Errors ocurred
Info Idoc1:IDoc with errors added
Info Idoc3:IDoc with errors added
Info Idoc2:IDoc with errors added
Data Package 1:arrived in BW:Processing:selected no:does not agree with transferred n
Processing(Data Packet):EVERYTING OK
Data Package 1:Everything ok
plzz help me out. -
Error when scheduling a workbook
Has anyone come accross this error before when scheduling a workbook thru the Scheduling Manager in Discoverer Plus 10gR2?
"Exceeded maximum query size". All worksheets run to a sucessful completion when you run them one at a time.
Thanks BrentHi
this is bug, refer to doc id: 472947.1 in metalink
you need to download the Patch 6493304.
regards,
Jay -
HTTP 302 Error When Scheduling OEM Report
I'm trying to schedule a custom report to run out of OEM 11.1 and am receiving the below error. The report displays properly from the OEM console, but seems to get an HTTP 302 error when trying to schedule the report to run, have changed the schedule options from daily, weekly, one-time immediately, one-time later and all generate the same error. Not sure what is causing the HTTP 302 redirect during the report execution, any help is appreciated.
This is a scheduled report.
The most recently generated report completed with the following error.
Error: Unexpected error getting the HTTP response stream while generating report: oracle.sysman.eml.ip.publishJob.HttpConnectionException:Response code:302
Error Message :302 Moved Temporarily
This document you requested has moved temporarily.
It's now at https://<<hostname>>:7799/em/console/logon/logon;jsessionid=6NJRQGKd2NVwNdbpWpVfHlG7vRxnvmn3VW71JdJbtnLyCJt5hyYt!544936836
Connection: https://<<hostname>>:7799/em/console/home URI:/em/onetime/reports/render?printablePage=true&reportID=C47BD93ACFE176D4E040007F01004FA6&action=save&scheduled=true
Thanks,
ShawnIssue was related to the Console URL setting in the Grid Control Overview tab, it was set to http://<host>:<port>/em/console and should have been set to http://<host>:<port> instead.
-
Errors when scheduling scenarios for agents using load balancing
Hi,
I have set up my ODI environment and have successfully manged to:
* run scenarios manually in development repository
* schedule scenarios and run on execution repository with one agent.
However when I try to set up a second agent to load balance the scenarios I get the following error below.
It seems to be a load balancing problem because I can run the scenario's successfully in every other case.
I am running an oracle RAC database. (2 servers, one oracle instance on each). I have set up one ODI agent on each server and I am trying to load balance between these 2 agents.
In topology I have set up 1 logical agent. Physical agent 1 is linked to itself and also to Physical Agent 2 under the load balancing tab.
For my scenario's I have 2 master scenarios (which are the ones scheduled) that call a number of other scenarios in the correct order.
Could anyone assist me please?
Thanks,
Matthew
Error:
====
java.lang.NullPointerException
at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(Unknown Source)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(Unknown Source)
at com.sunopsis.dwg.cmd.e.i(Unknown Source)
at com.sunopsis.dwg.cmd.g.E(Unknown Source)
at com.sunopsis.dwg.dbobj.SnpScen.a(Unknown Source)
at com.sunopsis.dwg.dbobj.SnpScen.localExecuteSync(Unknown Source)
at com.sunopsis.dwg.tools.StartScen.actionExecute(Unknown Source)
at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(Unknown Source)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(Unknown Source)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(Unknown Source)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(Unknown Source)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(Unknown Source)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(Unknown Source)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(Unknown Source)
at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(Unknown Source)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(Unknown Source)
at com.sunopsis.dwg.cmd.e.i(Unknown Source)
at com.sunopsis.dwg.cmd.g.y(Unknown Source)
at com.sunopsis.dwg.cmd.e.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)Hi,
I'm wondering whether there may be a design flaw in the way our scenario's have been created / are executed.
Currently we have x number of scenarios executed by a x master scenario.
There are also y number of scenarios executed by a y master scenario.
These master scenarios are the ones scheduled against the agent and they call the "sub-scenarios".
We experience the above error when one of the "sub-scenarios" of a master scenario is executed on a different agent to where the master scenario is executed.
Any help greatly appreciated.
Thanks,
Matt -
Timout error when schedule a large report
I received a timeout error when I scheduled a large report. To refresh and save it as an excel file, and then send to a file location. I can do that with a small report. Could I change the setting somewhere to increase the bach process time? Thanks!
Failed
External Destination: File copy the instance with the filename: "Inventory Usage STE2008-11-20-11-48-52.xls" to the directory: "//osh_fs/share/Inventory Usage Report/STE" .
Creation Time: 11/20/2008 11:48 AM
Start Time: 11/20/2008 11:48 AM
End Time: 11/20/2008 12:08 PM
Server Used: oshbo1.Web_IntelligenceJobServer
Error Message: Transport error: No response from server, timeout exceeded.Hi,
For scheduling a lrage webi report:
Go into the CCM, and then Stop the Input, Output, WebI Job Server.
In the Command line of WebI Job Server :
Before -restart add " -requestTimeout 7200000"
i.e: ......procwebi -requestTimeout 7200000 -restart.........
In the Input FRS:
Do the same as above.
........ -requestTimeout 7200000 -restart......
In the Output Server do the same as well: add -requestTimeout 7200000 before -restart.
Start all the servers.
-Shreyash. -
RMAN script gives error when scheduled
Hi,
I have this rman script....
run {
allocate channel 'dev_0' type 'sbt_tape'
parms 'ENV=(OB2BARTYPE=Oracle8,OB2APPNAME=TPRD,OB2BARLIST=test TPRD)';
backup incremental level <incr_level>
format 'test TPRD<TPRD_%s:%t:%p>.dbf'
database;
backup
format 'test TPRD<TPRD_%s:%t:%p>.dbf'
archivelog all;
backup
format 'test TPRD<TPRD_%s:%t:%p>.dbf'
current controlfile;
When this script is executed to run at the present moment, it gives no problems. However, when this script is scheduled and when executed at the scheduled time, it gives the following error:
RMAN> CONNECT TARGET *
2> run {
3> allocate channel 'dev_0' type 'sbt_tape'
4> parms 'ENV=(OB2BARTYPE=Oracle8,OB2APPNAME=TPRD,OB2BARLIST=test TPRD,OB2BARHOSTNAME=+server.com+)';
5> backup incremental level
6> format
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "format": expecting one of: "equal, integer"
RMAN-01007: at line 6 column 1 file: C:/ob2.cmdfile.12274.c1e9.rman
[Major] From: ob2rman@+server.com+ "TPRD" Time: 2-11-2009 13:35:16
The database reported error while performing requested operation.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "format": expecting one of: "equal, integer"
RMAN-01007: at line 6 column 1 file: C:/ob2.cmdfile.12274.c1e9.rman
[Major] From: ob2rman@+server.com+ "TPRD" Time: 2-11-2009 13:35:16
Oracle Recovery Manager completed with errors.
Does anyone know what the problem is and why it only gives the error when it is scheduled and not otherwise?
Thanks in advance.Hi user629987,
The error comes from the following line
backup incremental level <incr_level>(found "format": expecting one of: "equal, integer"
see link:
http://download.oracle.com/docs/cd/B10501_01/server.920/a96565/rcmsynta9.htm#78484)
Can you replace it with
backup incremental level 0and retry?
Might be you have to adjust your format string to avoid <, > and : characters.
Regards,
Tycho -
Error when Schedule Processing Dimension
Hi Buddies,
From the help of BPC, I know BPC can schedule processing dimension in the background.
I acted as the instruction according with the steps in Help, but it doesn't work. (The help told me let the source table blank, but the system will tell me need to put a source table. I don't know how to put into a source table name)
Can anyone give some advice?
Thanks in advance!
MaggieMaggie,
When scheduling the dimension process from the administration console a table called TempScheduleMBRxxxx is created where xxxx is the dimensionname of the dimension your just scheduled to process. Try to put this tablename as the sourcetable, I think it should work. So if you are scheduling the Entity dimension try to put TempScheduleMBRentity into this field.
Of coursw also check after scheduling if the table is really created in the SQL database.
-Joost -
Error when scheduling infopackage
hi all,
when i am trying to scheduling infopackage its giving error like
Runtime Errors DBIF_RSQL_SQL_ERROR
Except. CX_SY_OPEN_SQL_DB
SQL ERROR IN DATABASE WHEN ACCESSING A TABLE.
This error is occuring in production system.please guide me how to resolve this issue.
regards
Vamshi D KrishnaHi,
these type of error will usually occur for tablespace or disk space not enough.
pls check ur oracle database for tablespace.just make a try to increase the space and again try ur process.
thnks. -
Error when scheduling infopackage for PA_PA OEMPLOYEE
hi all,
when iam scheduling info package for OEMPLOYEE it is giving error like "0EMPLOYEE : Overlapping time intervals of data record 298 with 305 : '['20040831'/'20040324'] '[to/from] RSDMD 190 ".
iam unable to solve it.please help me in this issue.
thanx
Vamshi D KrishnaHi,
This is a problem of time overlapping. As this is a master data, if for the same employee, the date overlaps then it will show you this error. Let me explain with example..
EID Valid from Valid to
1001 01.01.1000 10.01.2009
1001 08.01.2009 31.12.9999
In the above case, the dates for EID 1001 is overlapping. When you load this data, it will show you the dates are ovelapping.
So, first correct the data into the saource i.e. record number 298 with 305 and then upload again..
This will solve your problem...
Maybe you are looking for
-
0COMP_CODE Local currency different than 0COMPANY currency
Hello guys, We are implementing BCS for our client and the scenario for the same is as follows: We are using ECC 6.0, BW 3.5 with SEM 4.0., we have activated New GL Accounting in ECC 6.0. and have been able to bring in data from totals table FAGLFLEX
-
How to create dynamic source file path for lumira?
i have source file for lumira visualization on D:\lumira\SourceFiles\sample.xlsx; also .lums file in D:\lumira\demo.lums But when i use the same Lumira folder in different system i have to again create connection for the datasource for fetching the
-
Help, Trying to burn an SD DVD disc in FCP X from the Share menu. I've set Orange Chapter Markers with Titles in my project from the timeline and these don't appear when I check the box to use chapter markers for Subtitles in the Destinations box to
-
Do I still pay for the movie if not enough storage?
if not enough storage to download a movie on my iphone, do I still have to pay for the movie? It downloaded halfway before I got the "not enough storage" message.
-
Hi, Is there any method in the TopLink API that returns an Date or Calendar or Timestamp (etc) with the server/database time?? I need to use this time and I want to avoid creating a query to do that (I think creating the SQL query will let my applica