Error when scheduling infopackage for PA_PA OEMPLOYEE

hi all,
when iam scheduling info package for OEMPLOYEE it is giving error like "0EMPLOYEE : Overlapping time intervals of data record 298 with 305 : '['20040831'/'20040324'] '[to/from] RSDMD 190 ".
iam unable to solve it.please help me in this issue.
thanx
Vamshi D Krishna

Hi,
This is a problem of time overlapping. As this is a master data, if for the same employee, the date overlaps then it will show you this error. Let me explain with example..
EID      Valid from      Valid to
1001    01.01.1000     10.01.2009
1001    08.01.2009     31.12.9999
In the above case, the dates for EID 1001 is overlapping. When you load this data, it will show you the dates are ovelapping.
So, first correct the data into the saource i.e. record number 298 with 305 and then upload again..
This will solve your problem...

Similar Messages

Error when scheduling infopackage

hi all,
when i am trying to scheduling infopackage its giving error like
Runtime Errors DBIF_RSQL_SQL_ERROR
Except. CX_SY_OPEN_SQL_DB
SQL ERROR IN DATABASE WHEN ACCESSING A TABLE.
This error is occuring in production system.please guide me how to resolve this issue.
regards
Vamshi D Krishna

Hi,
these type of error will usually occur for tablespace or disk space not enough.
pls check ur oracle database for tablespace.just make a try to increase the space and again try ur process.
thnks.

Errors when scheduling scenarios for agents using load balancing

Hi,
I have set up my ODI environment and have successfully manged to:
* run scenarios manually in development repository
* schedule scenarios and run on execution repository with one agent.
However when I try to set up a second agent to load balance the scenarios I get the following error below.
It seems to be a load balancing problem because I can run the scenario's successfully in every other case.
I am running an oracle RAC database. (2 servers, one oracle instance on each). I have set up one ODI agent on each server and I am trying to load balance between these 2 agents.
In topology I have set up 1 logical agent. Physical agent 1 is linked to itself and also to Physical Agent 2 under the load balancing tab.
For my scenario's I have 2 master scenarios (which are the ones scheduled) that call a number of other scenarios in the correct order.
Could anyone assist me please?
Thanks,
Matthew
Error:
====
java.lang.NullPointerException
     at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(Unknown Source)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(Unknown Source)
     at com.sunopsis.dwg.cmd.e.i(Unknown Source)
     at com.sunopsis.dwg.cmd.g.E(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpScen.a(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpScen.localExecuteSync(Unknown Source)
     at com.sunopsis.dwg.tools.StartScen.actionExecute(Unknown Source)
     at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(Unknown Source)
     at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(Unknown Source)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(Unknown Source)
     at com.sunopsis.dwg.cmd.e.i(Unknown Source)
     at com.sunopsis.dwg.cmd.g.y(Unknown Source)
     at com.sunopsis.dwg.cmd.e.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

Hi,
I'm wondering whether there may be a design flaw in the way our scenario's have been created / are executed.
Currently we have x number of scenarios executed by a x master scenario.
There are also y number of scenarios executed by a y master scenario.
These master scenarios are the ones scheduled against the agent and they call the "sub-scenarios".
We experience the above error when one of the "sub-scenarios" of a master scenario is executed on a different agent to where the master scenario is executed.
Any help greatly appreciated.
Thanks,
Matt

Error when scheduling job for Job Control LO

Hi all,
I tried to schedule the job for collective update after I set the job parameter in tcode LBWE for LO Data Extraction. But they said 'Error generating job' without any description why.
Maybe you can help me about this since I still can't do the delta extraction for LO.
Thanks and appreciate for your help.
-Martin Darmawi-

Hi!
You have to pass two parameters for job control scheduling.In that you have traffic light for the respective parameters,defaulty those will appear in red.when you have specified parameters,both turns in to green.then you can say start.hope this will helps.....
Best Regards
Sunil.

Error message "Error when scheduling the query(JOB_CLOSE)".

Hi all,
While using query extractor (rscrm_bapi) I am getting error message "Error when scheduling the query(JOB_CLOSE)".
Could you please find what this error is?
Thanks,
Uday.

Hi Uday,
This problem can occur if you changed the query definition.
In this case the query definition would be inconsistent with the existing extract structure.
Certain Meta information is maintained with each extract defined using the RSCRM_BAPI. If the definition of the query is changed and you need to use the same extract table then you need to delete the extract using the report RSCRMBW_DEL_ALL_EXTRACTS selecting the extract you want
to delete.
After this you could use the same table name for any further extract that you need to create.
One caution is that the extract table should not be deleted through any other transaction before you run the report.
Rgds,
Colum

Getting server error. CrystalEnterprise.Smtp: error when scheduled a webi

Getting server error. CrystalEnterprise.Smtp: error when scheduled a webi report to save as excel and send to an email account. What things to look for?

yes you should read the administration documents,
go to CMC, find "servers"
then "destination job server"
then click the "destination " tab
you will find some parameters, you have to configure it you.
the same scenario will be done to the "web intelligence job server"
good luck
Amr

Error when scheduling job (JOB_SUBMIT) when execute PC in WAD

Dear BIers,
I execute a Process Chain in commond button of WAD, however, I got the error message:
Job BI_PROCESS_DTP_LOAD could not be scheduled. Termination with returncode 8
Returncode '8' means ' Error when scheduling job (JOB_SUBMIT).
Any suggestions are appreciated.
B.R
Gerald

Dear Raju,
Have you checked SM21? Maybe you have a problem with your TemSe object. If this is the case a basis guy should know how to handle it.
Greetings,
Stefan

Getting error when schedule a webi report

Hi All,
I am getting error "Cannot initialize Report Engine server. (Error: RWI 00226) Error: INF) while schedule a Webi report.
Could anyone help me regarding the error?
Regards

Hai
Check this Links
http://www.sap-forum.org/f22/smtp-error-when-scheduling-webi-report-t483/
http://www.businessobjectstips.com/tips/server/sizing-limits-to-web-intelligence-report-server-maximum-simultaneous-connections/

Error when executing statement for table/stored proc

Hi All,
 I am getting this error when executing IDOC to JDBC (Stored Procedure) Scenario.
 In my stored procedure I have three insert statements to insert rows in to 3 tables.
 This stored procedure is working fine for two insert statements i.e,
 For this I have created data type for stored procedure with 10 elements and executed the scenario and was successfully running.
 when I added 3rd insert statement to stored procedure ie., when i added 5 more elements to the datatype (totally 15 elements) it starts giving the bellow error in Message Monitoring.
Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
 Note:- I have run the stored procedure with three insert statements in Sql Server, and also by calling an external program also, and was working fine.
 Note : Is there any structure needs to be follow when working with IDOC to Stored procedure.
I am struck up with the error, can any body resolve this issue.
Thanks in Advance,
Murthy

Hi narasimha,
 This seems to be any error due to incorrect query formation.In your receiver jdbc channel set the parameter logSQLstatement = true.you can find this parameter in the advanced mode. Using this parameter you will be able to see the sql query which is generated at runtime in the audit log in RWB.
Regards,
Pragati

Error when loggong on for external ID "": Error during SAML 2.0 logon

Hi,
I'm getting be below error when trying to use SAML SSO for a ABAP Webdynpro page on a NW 7.4 system. When I access the page, it redirects to the identity provider, comes back to the page and it shows the logon page. I'm looking for any ideas of things I could look at.
N SAML20 SP (client 400): Incoming Response
N SAML20 Binding: POST
N SAML20 IdP Name: http://xxxxxx/adfs/services/trust
N SAML20 Status Code: urn:oasis:names:tc:SAML:2.0:status:Responder
N SAML20 SP (client 400): Default ACS endpoint: https://xxxxxx/sap/saml2/sp/acs/400 , old default ACS endpoint
N SAML-Trace: CALL 'SAML login': SY-SUBRC = 222 , PWDCHG = 0
N *** ERROR => SAML-Trace: Path = /sap/bc/webdynpro/sap/oauth2_authority [sign.c 16519]
N {root-id=005056AD26DF1ED4B69880FF4BE51F68}_{conn-id=005056AD26DF1ED4B69880FF4BE53F68}_1
N *** ERROR => SAML-Trace: Returncode = 222 [sign.c 16519]
N *** ERROR => SAML-Trace: Message class = SAML number = 011 [sign.c 16519]
N *** ERROR => SAML-Trace: Message = Error when logging on for external ID "": Error during SAML 2.0 logon [sign.c 16519]
I have updated the service to use alternate logon procedure and added the handler CL_HTTP_EXT_SAML20
I have added the identity provider through transaction SAML2, but it does not seem to be working.
Here is a decrypted SAML assertion:
<samlp:Response ID="_9c844d84-8117-4851-8270-aeb12e935daf"
Version="2.0"
IssueInstant="2015-04-02T00:21:06.477Z"
Destination="https://xxxxxxxxx/sap/saml2/sp/acs/400"
Consent="urn:oasis:names:tc:SAML:2.0:consent:unspecified"
InResponseTo="S005056ad-26df-1ed4-b699-c4c630853f68"
xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol"
>
<Issuer xmlns="urn:oasis:names:tc:SAML:2.0:assertion">http://xxxxxxxx.com/adfs/services/trust</Issuer>
<ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
<ds:SignedInfo>
<ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
<ds:SignatureMethod Algorithm="http://www.w3.org/2001/04/xmldsig-more#rsa-sha256" />
<ds:Reference URI="#_9c844d84-8117-4851-8270-aeb12e935daf">
<ds:Transforms>
<ds:Transform Algorithm="http://www.w3.org/2000/09/xmldsig#enveloped-signature" />
<ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
</ds:Transforms>
<ds:DigestMethod Algorithm="http://www.w3.org/2001/04/xmlenc#sha256" />
<ds:DigestValue>08HK08VLpJC23JoQs+p+oHbDBvjRF+9NwBeowmlFTrY=</ds:DigestValue>
</ds:Reference>
</ds:SignedInfo>
<ds:SignatureValue>xxxxxxx</ds:SignatureValue>
<KeyInfo xmlns="http://www.w3.org/2000/09/xmldsig#">
<ds:X509Data>
<ds:X509Certificate>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</ds:X509Certificate>
</ds:X509Data>
</KeyInfo>
</ds:Signature>
<samlp:Status>
<samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Responder">
<samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:NoPassive" />
</samlp:StatusCode>
</samlp:Status>
</samlp:Response>

Hi Brian,
I am not sure but you could check below thread and couple of sap note.
Single Sign On - Sharepoint 2010 to SAP using ADFS
1799402 - Automatic account creation for SAML 2.0 SP
1257108 - Collective Note: Analyzing issues with Single Sign On (SSO)
It may help you to resolve / identify the cause of the issue.
BR
AKJ

Error when opening Count for Campaigns ZSEG_D02_Q0001.

I get the attached error when opening Count for Campaigns ZSEG_D02_Q0001 on the portal.
Please tell me what can be the reason behind this.

Hi,
you write field routine for that infoobject(BPSTATE), like below.
DATA X TYPE /BI0/OIBPSTATE.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 INPUT = <SOURCE_FIELDS>-BPSTATE
 IMPORTING
 OUTPUT = X.
RESULT = X.
I HOPE IT SHOULD WORK.
Regards,
Ranganath.

File to JDBC :Error when executing statement for table/stored proc.

Hi,
I am getting following error when i am trying to insert data into z-table using JDBC recr adapter.
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'ZTEST' (structure 'STATEMENT'): java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Invalid object name 'ZTEST'.
But the database table name 'ZTEST' exists in the system.
XML structure:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_RECR xmlns:ns0="http://urn:srini/FileToJDBC">
 <STATEMENT>
 <TEST action="INSERT">
 <table>ZTEST</table>
 <access>
 <ROLLNO>123</ROLLNO>
 <FIRSTNAME>ABC</FIRSTNAME>
 <LASTNAME>XYZ</LASTNAME>
 </access>
 </TEST>
 </STATEMENT>
</ns0:MT_RECR>
Regards,
Srinivas

Hi,
I have changed my MT str but still getting the same error.Is it possible to insert/ update a z-table using JDBC adapter.
XML str:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_RECR xmlns:ns0="http://urn:srini/FileToJDBC">
 <STATEMENT>
 <ZTEST action="INSERT">
 <access>
 <ROLLNO>123</ROLLNO>
 <FIRSTNAME>abc</FIRSTNAME>
 <LASTNAME>XYZ</LASTNAME>
 </access>
 </ZTEST>
 </STATEMENT>
</ns0:MT_RECR>
Regards,
Srinivas

Error when creating files for transport request SAPK-700BGINPLMWUI

Hello experts,
We're upgrading our 46c System to ERP 6.0 EHP4.
In Phase EHP_INCLUSION we get the following error Message: Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"
We've already checked the SAINT version; Upgrade Fix, SAPCAR version. We've checked our TMS as well and everything seems O.K.
Any help would be really appreciated!!!
Complete Error message:
EhP component PLMWUI, 700
Looking for SAINT package for 'PLMWUI' ...
R3upReadNewPackages:
patchType='U', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
... No matching package found.
R3upReadNewPackages:
patchType='I', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
Found: name = 'PLMWUI', release = '700', package = 'SAPK-700BGINPLMWUI', type = 'AOI'
... Matching package found: 'PLMWUI','700','SAPK-700BGINPLMWUI'
(trc) R3upPatchDisassembleQueue: 1 package queue entries
(trc) R3upPatchDisassembleQueue: force=YES
(trc) R3upPatchDisassembleQueue: 1 packages will be disassembled
Starting disassembling package queue
Date & Time: 20100319133139
Starting RFC Login to: System = "X05", GwHost = "sxt ", GwService = "sapgw00"
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "SPDA_DISASSEMBLE_QUEUE" by RFC
Input table IT_PATQ:
"SAPK-700BGINPLMWUI","000","AOI","PLMWUI","700","SAP PLM Web UI","00"
Call of function module "SPDA_DISASSEMBLE_QUEUE" by RFC succeeded
Logging off from SAP system
Date & Time: 20100319133139
Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"

Hello Anthes,
Please Check the things in following sequence :
1.Use latest SAPehpi, R3trans and tp versions.
2. users/group authorization issue and/or ownersip limitations (set 777) .Reboot the server to make sure, that the authorisations are updated and there is no lock on a file in the EHPI dir.Repeat the phase.
Folders where permissions should be 777 are Upgrade directory, Data Directory, Cofile directory and .../EPS/in.
3. Source file corruption can be ruled out by execution
R3trans -l /usr/sap/<SID>/..../abap/data/R-700BGINPLMWUI.SAP (The data file corresponding to the Package which is giving error). Check if this ends fine.
Note 2050
4. Confirm that your transport tool is 'healthy' by testing it in STMS. In SPAM in client 000 use the function Disassemble package and enter the package <Package name>.
5. Try to update the kernel if it not helps.
Best Regards
Niraj

HT6413 I keep getting a installation pkg error when installing icloud for windows 7 on my pc.

I keep getting an windows installation error when installing icloud for windows 7. I have tried installing manually without success.

There is a very long way which is removing anything related to Apple including stuff in the registry.
The short way is as follows. It worked for me.
I have seen that in the forum EXCEPT the registry trick which is missing and does the different.
1. Remove the Apple account from Outlook. In my case a me.com account.
2. Disconnect the connection to ICloud in the control panel of version 3.1.
REBOOT and open Outlook to see that all traces of the email account and of ICloud are gone.
3. Uninstall ICloud 3.1. I used REVO Uninstaller in Safe way mode. It removed some stuff in the registry from what I see; but not sure.
4. Delete as much stuff as possible in the C \Program Files (x86) \Common Files \ Apple
and C\Program Files\Common Files \Apple. My computer is 64 bits.
5. Go to the registry by typing regedit.exe or simply type regedit in the Start Box. Search for ICloud. I deleted TWO entries related to ICloud. Otherwise, you will still see the ICloud control panel despite the fact that you removed 3.1.
6. then I was able to install ICloud 4 immediately. Upon restarting it asked me my email and password and added itseft to Outlook like it was before. Be aware that you address book in Outlook could be deleted, so do an export before.

Ent-06972 Error When Displaying BIBeans for Dimension Dataviewer

dear all,
I have problem when trying to view data on dimension with dataviewer in OWB 11g. it's no problem when i load small amount of data, but when i load huge amount of data i've got error message "ent-06972 Error When Displaying BIBeans for Dimension Dataviewer ". is it some kind of bug in OWB?

I am also getting the same error, using 11g.

Error when scheduling infopackage for PA_PA OEMPLOYEE

Similar Messages

Maybe you are looking for