Error when selecting detailed navigation menu item
Hi,
Usually on selection of a menu item from detailed navigation an iview appears which contains values from an R/3 system, but now when i select any item for the detailed navigation i get a download pop up window
which ask me to save the page. When i press the save button the download stops.
Is this a problem with the SAP GUI ? please give me a solution ?
Regards
Christina Dove
hi
GUI Properties
Description -
> New ECC 6.0
AppServer -
> here application Server
SysID -
> here System ID
System Number -
>
SAP System ---> R/3
Similar Messages
-
Why does form validation take effect when navigating menu items?
I am using JDev 10.1.3.3.
I have a data entry form where all the af:inputField's are set to Required=true. I expected that the mandatory fields should only be enforced if I click the form 's submit button.
However, when I navigate to another menu item from my menu bar without filling in the fields, the mandatory fields also get enforced (e.g. Required Messages on fields appear and I am forced to have to enter some data on the field before I am able to navigate to another menu item. ) Navigating menu items should imply I am not proceeding with the data entry and should allow me to navigate instantly, even if there are blank fields.
I notice the SRDemo also had this same behavior. Under "New Service Request", if you don't fill in a description and navigate to another menu item from the menu bar, it will complain and ask you to enter a problem description before switching tabs.
This is obviosly not the intended behavior. How do I change this behavior so that when I switch menu items, data validation will not take place?Hi
it happens cause the entire page is one form when you try to navigate out what it does is that it submits the form.
To avoid validation for particular links or buttons set their property immediate to "true"
hope this helps -
When using Ip-address in EP URL, the Detailed Navigation menu doesnt open
Hi,
We are facing a strange situation where if we use the ip address in EP url (e.g. http://172.12.65.12:50000/irj) the Detailed Navigation menu does not open at all for all tabs, and also when we try to log off, the termination pop-up comes but after that nothing happnes and we remain at the same screen (from where we tried to log off).
However, when we use the host name in the url (e.g http://hostname:50000/irj) everything works absolutely fine.
Can anyone please help us with this.
Thanks & Regards,
AngadPlease check the Note 654982 - URL requirements due to Internet standards
The EP URL should be like this ..
http://<hostname_of_Portal server>.<Domain_name>:<http_port of WAS JAVA _CI>/irj
e.g http://myhost.sales.mycomp.com:50000/irj
The formulae to claculate the http port of WAS JAva CI is
50000+(100*Instance no of CI) or simply 5XX00, where XX stands for the 2 digit no representing the Instance number of the sentral instance.
If you dont know this number , there are other ways to find out this.
Priyabrata -
Error when select posting level in document type
Hi,
Did anyone have an experience to face the Abab run time error when select "posting level" in document type?
The Error is : GETWA_NOT_ASSIGNED
Short text
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_UC_ITKEY_FACTORY===========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.If you searched the notes, as Dan proposed (and didn't find anything relevant), and the answer to the Greg's question is positive, then I would suggest regeneration data basis and ConsArea due to data model inconsistency.
If it doesn't not help - open customer message to SAP.
Edited by: Eugene Khusainov on Jan 26, 2010 10:26 AM -
Hi All - After the upgrade, I am getting SP-Crawl Error for certain links. I check the Crawl component has proper permission.
Google is showing some article like
http://blog.karstein-consulting.com/2012/04/20/error-in-crawl-log-the-sharepoint-item-being-crawled-returned-an-error-when-attempting-to-download-the-item/
not sure if this resolution is referring to 2010 and/or 2013.
I checked the registery editor. I couldn't find 14.0 under the Office Server.
Any clue?
Regards,
Khushi
KhushiI checked the web application policy the search crawl account has full read permission.
Crawl
Fiddler
Log Error referring the Correlation ID
01/06/2014 13:05:06.14 w3wp.exe (0x1698) 0x0118 SharePoint Foundation
Monitoring nasq Medium Entering monitored scope (Request (GET:/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD)).
Parent No
01/06/2014 13:05:06.14 w3wp.exe (0x1698) 0x0118 SharePoint Foundation
Logging Correlation Data xmnv Medium Name=Request (GET:<SiteURL>/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD) e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.14 w3wp.exe (0x1698) 0x0118 SharePoint Foundation
Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.15 w3wp.exe (0x1698) 0x1738 SharePoint Foundation
General af71 Medium HTTP Request method: GET e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.15 w3wp.exe (0x1698) 0x1738 SharePoint Foundation
General af75 Medium Overridden HTTP request method: GET e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.15 w3wp.exe (0x1698) 0x1738 SharePoint Foundation
General af74 Medium HTTP request URL: /sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.17 w3wp.exe (0x1698) 0x1738 SharePoint Foundation
Files aise3 Medium Failure when fetching document. 0x80070090 e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.17 w3wp.exe (0x1698) 0x1960 SharePoint Foundation
Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:<SiteURL>/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD)).
Execution Time=20.5461867360237 e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.17 w3wp.exe (0x1698) 0x1960 SharePoint Foundation
Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:<SiteURL>/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD)).
Execution Time=29.917489513332 e8b1679c-0476-70d4-9fcd-2549ba3ee9d4
01/06/2014 13:05:06.17 w3wp.exe (0x1698) 0x1960 SharePoint Foundation
Monitoring nasq Medium Entering monitored scope (Request (GET:<SiteURL>nsurance%20Benefits%2fLife%20Insurance%2fBasic%20Life%20and%20ADD&FolderCTID=0x01200039DA632EEACF264685CF39D68A18F7C8)).
Parent No
Any clue?
Regards,
Khushi
Khushi -
Hello,
I just restarted my Maxtor external hard disk (which I use for time machine) because my Mac did not recognize it anymore.
Now it does but I get an error when selecting the volume for Time Machine. The error says:
"The file '.0011246f8842' can not be saved in the map 'Time Machine-reservekopieen'."
Does anybody have a clue what I need to do to get my Time Machine working again?
Thanks!
BBBauke Boezeman wrote:
Hello,
I just restarted my Maxtor external hard disk (which I use for time machine) because my Mac did not recognize it anymore.
Now it does but I get an error when selecting the volume for Time Machine. The error says:
"The file '.0011246f8842' can not be saved in the map 'Time Machine-reservekopieen'."
Hi, and welcome to the forums.
I'm not sure if that's the same message, but it sounds like a common permissions problem.
Try this: Open the Terminal app (in your Applications/Utilities folder).
In Terminal, the prompt looks like this: user-xxxxxx:~ <your name>$
(where <your name> is your short user name). It's followed by a non-blinking block cursor (unless it's been changed via Terminal > Preferences).
At the prompt, type the following exactly as shown, substituting the name of your TM drive exactly, including any spaces, between the quotes:
sudo chmod 644 /volumes/"TM drive name"/.0011246f8842
Press Return. You'll get some warnings and a request for your Administrator's password. Type it in (it won't be displayed) and press Return again.
Then try a +Back Up Now.+ -
Access denied error when user saves updated list item
After upgrading a site collection from Sharepoint 2010 to 2013, users with Contribute and Manage Lists permissions cannot save changes to items in lists. All permissions appear to be inherited correctly by the list and when running a permission check for
the user it returns the expected results. I also tried setting the list to use custom permissions but that didn't help. The logs show the following error when trying to save an item:
System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
A Sharepoint Designer form is used to edit the items so I don't know if that is related to the issue. After the upgrade the form would not load and was giving a different error until I opened it in Designer 2013 and saved it again. Editing items as a farm
administrator user works OK.Hi,
According to your description, my understanding is that the users cannot update the list items after migrating to SharePoint 2013.
Please check this article:http://technet.microsoft.com/en-us/library/gg251985.aspx.
This is taken from that article:
"Users who submit valid credentials when accessing the migrated web application might be notified that they do not have permissions. If this occurs, the portalsuperuseraccount property and the portalsuperreaderaccount property of the web application
were probably configured prior to migration. If this is the case, update the portalsuperuseraccount property and the portalsuperreaderaccount property to use the new claims-based account name. After migration, you can find the new claims-based account name
in the web application policy for the migrated web application."
Please update these accounts use the following PowerShell script to see if the issue still occurs:
$webApp = Get-SPWebApplication "http://<server>/"
$webApp.Properties["portalsuperuseraccount"] = "i:0#.w|domain\superuser"
$webApp.Properties["portalsuperreaderaccount"] = "i:0#.w|domain\superreader"
$webApp.Update()
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Error when selecting the Report Center tab of the Issues web DB
I started a DB from the Issues web DB template. Everything worked fine when I shutdown last night, but this morning I started receiving the following error when selecting the Report Center tab.
You must specify an object for the BrowseTo to open. I have noticed that the ReportCenterDefault form no longer displays. How do I correct this?Hi Ben
Wyer,
Have you resolved
your problem yet, and does the suggestion help you? If you still have any concern on the thread, feel free to follow up.
Best Regards,
Bruce Song [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
The SharePoint item being crawled returned an error when attempting to download the item.
I get this error when I run full crawl.
The SharePoint item being crawled returned an error when attempting to download the item.
I did make sure that the crawl account has full read access to the web application. I am able to access the page and site just fine from a browser. I am not sure what is causing the problem.On closely looking at ULS logs, this is what I am noticing....
CSTS3Accessor::Init: SharePointError found in URL
http://xxxxx/default.aspx header value 0, hr=8004FD0F [sts3acc.cxx:566] d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx
CSTS3Accessor::Init fails, Url sts4://xxxx/siteurl=/siteid={c011d5c9-9019-41e8-bf5a-5176739b2b79}/weburl=xxxxx/webid={e42001c0-2ef1-4a8e-8fe5-361d72fa60c2}, hr=8004FD0F [sts3handler.cxx:312] d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx
CSTS3Handler::CreateAccessorExD: Return error to caller, hr=8004FD0F [sts3handler.cxx:330] d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx -
Detailed navigation menu does not appear.
Dears, some users in our system, can not see the Detailed Navigation Menu (menu on the left side of the portal). Almost all users have the same profile called "EVERYONE" and see the same features. Only some users complain that they can not see the left menu. Someone has seen something similar?
Thanks
MarcosHi Marcos,
Do these users have more or less tabs (top level navigation)? Do the details not show up in every tab or only certain tabs? What if you log onto those PCs with another account (e.g. admin)? I'm trying to figure out whether the issue associates with the user accounts. Any other differences that you noticed which might help narrow down the problem? Otherwise, since you mentioned that users have the same roles, platform environment/configuration, ... there shouldn't be any reason why the portal would behave differently.
Regards,
Dao -
ORA-1722 ERROR WHEN SELECTING MFG_LOOKUPS TABLE
제품 : AOL
작성날짜 : 2003-04-07
ORA-1722 ERROR WHEN SELECTING MFG_LOOKUPS TABLE.
================================================
PURPOSE
Problem Description
sqlplus 에서 mfg_lookups table을 select할때,
ORA-1722 Invalid number 에러발생
Workaround
Solution Description
=======================================================
CREATE OR REPLACE VIEW mfg_lookups(
lookup_type,
lookup_code,
meaning,
description,
enabled_flag,
start_date_active,
end_date_active,
created_by,
creation_date,
last_update_date,
last_updated_by,
last_update_login
AS
SELECT lv.lookup_type,
TO_NUMBER(lv.lookup_code) lookup_code, <==== Wrong code!!!
lv.meaning,
lv.description,
lv.enabled_flag,
lv.start_date_active,
lv.end_date_active,
lv.created_by,
lv.creation_date,
lv.last_update_date,
lv.last_updated_by,
lv.last_update_login
FROM fnd_lookup_values lv
WHERE lv.LANGUAGE = USERENV('LANG') AND
lv.view_application_id = 700 AND
lv.security_group_id =
fnd_global.lookup_security_group(lv.lookup_type,
lv.view_application_id)
=================================================================
MFG_LOOKUPS 은 view로 fnd_lookup_values의 lookup_code값을 가지고 오는
방식이나, to_number로 변환하게 되어 있어 숫자가 아닌 문자의 경우
이와 같은 에러를 발생한다.
이번 경우, 고객이 새로 등록한 Lookup code였고, code값을 숫자의 format으로
다시 등록하니 해결됨.
Reference Documents
-------------------Yes but this is a regular operation and the INSERT is the only opportunity.
BTW, look at what else I have just found:
INSERT INTO Local_Table (a, b)SELECT col1, col2 FROM DUAL INNER JOIN Table1@remote ON (1=1) LEFT JOIN Table2@remote ON (...)
OK. -
Hide PerformancePoint "Show Details" Context Menu Item
Hi,
How to Hide PerformancePoint “Show Details” Context Menu Item in ScoreCard?
I have tried the below code but i didnt get anything.
if (PPSMA.MenuOptionHelper) {
PPSMA.MenuOptionHelper.prototype.showDetails = function () { return false; };
Thanks & Regards
Poomani SankaranHi Poomani,
Refer this article
http://electrovoid.wordpress.com/2012/05/03/pps-hide-show-details/
Please remember to click 'Mark as Answer' on the answer if it helps you -
Freezes, Especially When Navigating Menu Items
Computer / Mouse freezes for a few seconds (and then recovers) almost every time I'm navigating the menu items (Bookmarks, adding Bookmarks), History etc.
I have both Firefox and Nightly and both have same problem. Even disabling add-ons, themes etc. does not seem to have helped.
It is a fairly new computer from HP and they said it was a software issue. Can anyone help?
Thanks.Hi
it happens cause the entire page is one form when you try to navigate out what it does is that it submits the form.
To avoid validation for particular links or buttons set their property immediate to "true"
hope this helps -
Error when selecting 'Preferences' under Tools menu
I would be grateful if anyone could assist me with an error I am having in JDeveloper version 9.0.3.5.
When I select Tools > Preferences I get a pop-up error with the details below.
Many thanks,
Mark
java.lang.NullPointerException
at oracle.ide.addin.config.AddinManagerOptions.copyToImpl(AddinManagerOptions.java:151)
at oracle.ide.addin.config.AddinManagerOptions.copyTo(AddinManagerOptions.java:462)
at oracle.ide.util.ModelUtil.deepCopy(ModelUtil.java:297)
at oracle.ide.config.IdeSettings.copyToImpl(IdeSettings.java:137)
at oracle.ide.config.IdeSettings.copyTo(IdeSettings.java:131)
at oracle.ide.config.IdeSettings.showDialog(IdeSettings.java:313)
at oracle.ide.config.IdeSettings.showDialog(IdeSettings.java:241)
at oracle.ide.cmd.IdeSettingsCommand.doit(IdeSettingsCommand.java:35)
at oracle.ide.CommandProcessor.invoke(CommandProcessor.java:363)
at oracle.ide.CommandProcessor.invoke(CommandProcessor.java:115)
at oracle.ide.IdeAction$1.run(IdeAction.java:614)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)Thanks for that Jan,
I did have a more recent version of JDeveloper (10g), but I have removed all versions of JDeveloper now and downloaded patch: p6469392_11i_GENERIC.zip which is for OA Framework Version 11.5.10.6RUP.
I have again gone to the Tools > Preferences after launching this JDeveloper version (9.0.3.5 Build 1453) and got the error box again, with the same error stack. I'm not sure where to start with this error as it is in the standard functionality of the JDeveloper GUI and any help would be appreciated.
Many thanks,
Mark -
Javascript error when selecting Spry Menu Bar in Design View
Hi there,
I get the following error message when trying to format the Spry Menu Bar in Design View:
"while executing inspectSelection in spry_menu.htm, a Javascript error occurred."
I have tried the following troubleshooting steps:
deleting site cache
closing/re-opening Dreamweaver
deleting Spry Menu Bar and recreating - same error occurs.
Other information:
I am using a MacBook Pro
it happens when clicking on the Menu Bar itself. I just want to change the properties
the Spry Menu Bar does not appear in Live View.
Here is a link to my site on Browserlab. It has not yet been published:
https://browserlab.adobe.com/en-us/index.html#zoom=100;state=use;view=0;url=dreamweaver%3A %2F%2Fsite%3AHope%2520Against%2520Hope%2FHAH_home.html;browsers=WXPIE6000%2CWXPIE9000%2COS XFF7000%2COSXSF5000%2CWXPCH14000
Is it a case of changing one of the values in the spry_menubar.js file?
Can anyone help?
Thanks,
CharlieHi there,
The problem appears to have returned. I am getting the same error message as before and also an error saying there is a syntax error in my source code. Dreamweaver tells me which line the error is in:
var MenuBar1 = new Spry.Widget.MenuBar("hope_menu", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
In response to your earlier questions/points:
I am using version 0.13 of SpryMenuBar.js (is this what you mean?)
The menu now shows in Live View as I would expect it to
Here is a link to my published site:
http://hopeagainsthopeuk.co.uk/HAH_home.html
Do you have any further advice?
Maybe you are looking for
-
I have a 1 year old iMac G5 Intel Core Duo 1.83GHz with built-in iSight and 2GB of 667MHz DDR2 SDRAM. I am running OS 10.5.2. I have only used the iSight camera a couple of times. Recently, I discovered that the computer just doesn't see it anymore.
-
Problems with PDF's saved in illustrator
Hello, I have designed a menu for a client in illustrator & saved it as a PDF. Which when I save it looks like this.... Now the client has come back me, because when they upload it to the printers website it looks like this.... I have tried saving it
-
I am trying to sign a PDF file in Acrobat 8. When I click sign, all of the items in the drop down are greyed out except getting started. I checked the security preferences of the PDF and it showed that signatures were allowed. I have a signature crea
-
Info records with multiple vendors
Hello all, I have some info records defined for multiple vendors for subcontracting material numbers. How do I tell SAP to use a specific vendor by default when it creates the Purchase Requisition? Thanks in advance for information.
-
Error about active apple developer progam.
Dear Apple Support! Yesterday, I received a email about creat my apple developer. I clicked a code to active my account and i received a information: " We are unable to activate your Apple Developer Program membership". Please email to show me how to