Error when selecting system during scheduling of background job in RAR

Hi,
I am getting an error when I attempt to schedule a background in RAR. It happens when I go to the multiple system selection option. I select a system and click copy. An error example below appears in the logs even when I dont go ahead and schedule the job. The job still runs and returns results when scheduled. However these errors in the logs concern me. Anybody else experience this?
Aug 4, 2010 4:12:32 PM com.virsa.cc.common.util.ExceptionUtil logError
SEVERE: NodeElement(.BatchRiskAnalysisSelection.RoleAnalysisInput.RoleAnalysisSystems): unknown attribute Sign
com.sap.tc.webdynpro.progmodel.context.ContextException: NodeElement(.BatchRiskAnalysisSelection.RoleAnalysisInput.RoleAnalysisSystems): unknown attribute Sign
     at com.sap.tc.webdynpro.progmodel.context.NodeElement.wdGetAttributeInfo(NodeElement.java:374)
     at com.sap.tc.webdynpro.progmodel.context.NodeElement.setAttributeValue(NodeElement.java:877)
     at com.virsa.cc.common.GUIElement.copyAttributes(GUIElement.java:696)
     at com.virsa.cc.common.GUIElement.copyNodeTree(GUIElement.java:792)
     at com.virsa.cc.common.GUIElement.copyNodeTree(GUIElement.java:777)
     at com.virsa.cc.common.ui.MultipleSelectionView.onActionCopy(MultipleSelectionView.java:187)
     at com.virsa.cc.common.ui.wdp.InternalMultipleSelectionView.wdInvokeEventHandler(InternalMultipleSelectionView.java:259)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
Regards,
Niamh

Hi
Did you check the connector whether the background system is connecting or not.
Goto RAR-Configuration>connectors> select the connector of the background system and then press on test connection.
Regards
Hari

Similar Messages

Error when selecting batch during prod order creation

Hi Gurus,
When selecting batch for production orders components, an error prompted 'Invalid batch, does not match the selection criteria in batch determinat.'
After checking, it is because the classification is not maintained. So I need to re-create in MSC2N.
The question is, how/where should I change back the configurations on checking the batch classification during prod ord?
Thank you.

Kumar,
Please let me know how many Component items are there in the BOM? Out of which how many are Phantom assembly?
It looks like when the BOM is copied to the order it is crossing 9999 items.
I would suggest you to use an intermediate order/material to reduce this number.
I think there was an OSS notes for this to extend the number of character length for BOM items numbering (POSNR).
Hope this helps...Reward your points,
Regards,
Prasobh

How to schedule the background job using current selection screen field val

Hello Friends,
How to schedule the background job using current selection screen field values.
after completion of the job the spool should be sent as a mail to SAP Inbox.
Is there any way to create the variant dynamically by reading the current selection screen values.
Thanks,
Ravi

Hi,
To get the variant details you can use teh following FM.
'RS_VARIANT_CONTENTS'.
Regards,
Ankur Parab

Error when select posting level in document type

Hi,
Did anyone have an experience to face the Abab run time error when select "posting level" in document type?
The Error is : GETWA_NOT_ASSIGNED
Short text
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_UC_ITKEY_FACTORY===========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.

If you searched the notes, as Dan proposed (and didn't find anything relevant), and the answer to the Greg's question is positive, then I would suggest regeneration data basis and ConsArea due to data model inconsistency.
If it doesn't not help - open customer message to SAP.
Edited by: Eugene Khusainov on Jan 26, 2010 10:26 AM

Error when selecting volume

Hello,
I just restarted my Maxtor external hard disk (which I use for time machine) because my Mac did not recognize it anymore.
Now it does but I get an error when selecting the volume for Time Machine. The error says:
"The file '.0011246f8842' can not be saved in the map 'Time Machine-reservekopieen'."
Does anybody have a clue what I need to do to get my Time Machine working again?
Thanks!
BB

Bauke Boezeman wrote:
Hello,
I just restarted my Maxtor external hard disk (which I use for time machine) because my Mac did not recognize it anymore.
Now it does but I get an error when selecting the volume for Time Machine. The error says:
"The file '.0011246f8842' can not be saved in the map 'Time Machine-reservekopieen'."
Hi, and welcome to the forums.
I'm not sure if that's the same message, but it sounds like a common permissions problem.
Try this: Open the Terminal app (in your Applications/Utilities folder).
In Terminal, the prompt looks like this: user-xxxxxx:~ <your name>$
(where <your name> is your short user name). It's followed by a non-blinking block cursor (unless it's been changed via Terminal > Preferences).
At the prompt, type the following exactly as shown, substituting the name of your TM drive exactly, including any spaces, between the quotes:
sudo chmod 644 /volumes/"TM drive name"/.0011246f8842
Press Return. You'll get some warnings and a request for your Administrator's password. Type it in (it won't be displayed) and press Return again.
Then try a +Back Up Now.+

Error when selecting the Report Center tab of the Issues web DB

I started a DB from the Issues web DB template. Everything worked fine when I shutdown last night, but this morning I started receiving the following error when selecting the Report Center tab.
You must specify an object for the BrowseTo to open. I have noticed that the ReportCenterDefault form no longer displays. How do I correct this?

Hi Ben
Wyer,
Have you resolved
your problem yet, and does the suggestion help you? If you still have any concern on the thread, feel free to follow up.
Best Regards,
Bruce Song [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

ORA-1722 ERROR WHEN SELECTING MFG_LOOKUPS TABLE

제품 : AOL
작성날짜 : 2003-04-07
ORA-1722 ERROR WHEN SELECTING MFG_LOOKUPS TABLE.
================================================
PURPOSE
Problem Description
sqlplus 에서 mfg_lookups table을 select할때,
ORA-1722 Invalid number 에러발생
Workaround
Solution Description
=======================================================
CREATE OR REPLACE VIEW mfg_lookups(
lookup_type,
lookup_code,
meaning,
description,
enabled_flag,
start_date_active,
end_date_active,
created_by,
creation_date,
last_update_date,
last_updated_by,
last_update_login
AS
SELECT lv.lookup_type,
TO_NUMBER(lv.lookup_code) lookup_code, <==== Wrong code!!!
lv.meaning,
lv.description,
lv.enabled_flag,
lv.start_date_active,
lv.end_date_active,
lv.created_by,
lv.creation_date,
lv.last_update_date,
lv.last_updated_by,
lv.last_update_login
FROM fnd_lookup_values lv
WHERE lv.LANGUAGE = USERENV('LANG') AND
lv.view_application_id = 700 AND
lv.security_group_id =
fnd_global.lookup_security_group(lv.lookup_type,
lv.view_application_id)
=================================================================
MFG_LOOKUPS 은 view로 fnd_lookup_values의 lookup_code값을 가지고 오는
방식이나, to_number로 변환하게 되어 있어 숫자가 아닌 문자의 경우
이와 같은 에러를 발생한다.
이번 경우, 고객이 새로 등록한 Lookup code였고, code값을 숫자의 format으로
다시 등록하니 해결됨.
Reference Documents
-------------------

Yes but this is a regular operation and the INSERT is the only opportunity.
BTW, look at what else I have just found:
INSERT INTO Local_Table (a, b)SELECT col1, col2 FROM DUAL INNER JOIN Table1@remote ON (1=1) LEFT JOIN Table2@remote ON (...)
OK.

Alv show in report but when see in spool (after run background job) there i

my program have some error when i run result alv show in report but when see in spool (after run background job) there is no data, (other program can see result in spool)
Please help
here is some example of my program
********************************declare internal table*****************************
internal table output for BDC
data : begin of t_output occurs 0,
bukrs type anla-bukrs,
anln1 type anla-anln1,
anln2 type anla-anln2,
zugdt type anla-zugdt,
result(70) type c,
end of t_output.
*****get data from loop********************************
loop at t_anla.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
         EXPORTING
              INPUT = t_anla-anln1
         IMPORTING
              OUTPUT = t_anla-anln1.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
         EXPORTING
              INPUT = t_anla-anln2
         IMPORTING
              OUTPUT = t_anla-anln2.
check record is correct or not
    select single bukrs anln1 anln2 zugdt
    into w_output
    from anla
    where bukrs = t_anla-bukrs and
    anln1 = t_anla-anln1 and
    anln2 = t_anla-anln2
   zugdt = '00000000'
if record is correct
    if sy-subrc = 0 and w_output-zugdt = '00000000'.
      w_output-bukrs = t_anla-bukrs.
      w_output-anln1 = t_anla-anln1.
      w_output-anln2 = t_anla-anln2.
      w_output-result = 'Yes : this asset can delete'.
      append w_output to t_output.
if record is not correct
    elseif sy-subrc = 0 and w_output-zugdt <> '00000000'.
there is error record this asset have value already
      v_have_error = 'X'.
      w_output-bukrs = t_anla-bukrs.
      w_output-anln1 = t_anla-anln1.
      w_output-anln2 = t_anla-anln2.
      w_output-result = 'Error : this asset have value already'.
      append w_output to t_output.
    else.
there is error record this asset donot exist in table anla
      v_have_error = 'X'.
      w_output-bukrs = t_anla-bukrs.
      w_output-anln1 = t_anla-anln1.
      w_output-anln2 = t_anla-anln2.
      w_output-result = 'Error : this asset doest not exist'.
      append w_output to t_output.
    endif.
*end of check record is correct or not
    clear w_output.
endloop.
******************************show data in ALV***************************************************
show data from file in ALV
perform display_report_ALV.
*&      Form display_report_ALV
form display_report_ALV.
DATA: LT_FIELD_CAT TYPE SLIS_T_FIELDCAT_ALV,
      LT_EVENTS TYPE SLIS_T_EVENT,
      LV_REPID LIKE SY-REPID.
PERFORM ALV_DEFINE_FIELD_CAT USING LT_FIELD_CAT.
PERFORM ALV_HEADER_BUILD USING T_LIST_TOP_OF_PAGE[].
PERFORM ALV_EVENTTAB_BUILD USING LT_EVENTS[].
LV_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            I_CALLBACK_PROGRAM = LV_REPID
            IT_FIELDCAT        = LT_FIELD_CAT
            I_SAVE             = 'A'
            IT_EVENTS          = LT_EVENTS[]
       TABLES
            T_OUTTAB           = t_output
       EXCEPTIONS
            PROGRAM_ERROR      = 1
            OTHERS             = 2.
IF SY-SUBRC NE 0.
    WRITE: / 'Return Code : ', SY-SUBRC,
      'from FUNCTION REUSE_ALV_GRID_DISPLAY'.
ENDIF.
endform.
*&      Form alv_define_field_cat
      text
     -->P_LT_FIELD_CAT text
FORM ALV_DEFINE_FIELD_CAT USING TB_FCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: WA_FIELDCAT LIKE LINE OF TB_FCAT,
    LV_COL_POS TYPE I.
DEFINE FIELD_CAT.
    CLEAR WA_FIELDCAT.
    ADD 1 TO LV_COL_POS.
    WA_FIELDCAT-FIELDNAME = &1.
    WA_FIELDCAT-REF_TABNAME = &2.
    WA_FIELDCAT-COL_POS = LV_COL_POS.
    WA_FIELDCAT-KEY = &3.
    WA_FIELDCAT-NO_OUT = &4.
    WA_FIELDCAT-REF_FIELDNAME = &5.
    WA_FIELDCAT-DDICTXT = 'M'.
    IF NOT &6 IS INITIAL.
      WA_FIELDCAT-SELTEXT_L = &6.
      WA_FIELDCAT-SELTEXT_M = &6.
      WA_FIELDCAT-SELTEXT_S = &6.
    ENDIF.
    WA_FIELDCAT-DO_SUM = &7.
    WA_FIELDCAT-OUTPUTLEN = &8.
    APPEND WA_FIELDCAT TO TB_FCAT.
END-OF-DEFINITION.
FIELD_CAT 'BUKRS' 'ANLA'     'X' '' 'BUKRS' 'Company Code' '' ''.
FIELD_CAT 'ANLN1' 'ANLA'     'X' '' 'ANLN1' 'Asset Number' '' ''.
FIELD_CAT 'ANLN2' 'ANLA'     'X' '' 'ANLN2' 'Asset Sub Number' '' ''.
FIELD_CAT 'ATEXT'   'T5EAE'     'X' '' 'ATEXT' 'Result' '' ''.
FIELD_CAT 'RESULT' ''     'X' '' 'RESULT' 'RESULT' '' ''.
ENDFORM.                    " alv_define_field_cat

Hi,
Check this code..
FORM display_report_alv.
DATA: lt_field_cat TYPE slis_t_fieldcat_alv,
lt_events TYPE slis_t_event,
lv_repid LIKE sy-repid.
PERFORM alv_define_field_cat USING lt_field_cat.
PERFORM alv_header_build USING t_list_top_of_page[].
PERFORM alv_eventtab_build USING lt_events[].
lv_repid = sy-repid.
IF sy-batch EQ 'X'. ----> " System Field for Backgroud..if Background use list display
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
      EXPORTING
        i_callback_program = lv_repid
        it_fieldcat        = lt_field_cat
        i_save             = 'A'
        it_events          = lt_events[]
      TABLES
        t_outtab           = t_output
      EXCEPTIONS
        program_error      = 1
        OTHERS             = 2.
ELSE.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        i_callback_program = lv_repid
        it_fieldcat        = lt_field_cat
        i_save             = 'A'
        it_events          = lt_events[]
      TABLES
        t_outtab           = t_output
      EXCEPTIONS
        program_error      = 1
        OTHERS             = 2.
ENDIF.
IF sy-subrc NE 0.
    WRITE: / 'Return Code : ', sy-subrc,
    'from FUNCTION REUSE_ALV_GRID_DISPLAY'.
ENDIF.
ENDFORM.                    "display_report_ALV

Exact Steps to schedule a background job a specific time daily :

Dear All,
Please let me know the whole process involved in schedule a background job a specific time daily. what is calender id. I could not understand what it has given in SM36.
Thanks in advance.
Rgds
Prem.

Hi prem
this is complte procedure for ur requirment.
Scheduling Background Jobs
Use
You can define and schedule background jobs in two ways from the Job Overview:
Directly from Transaction SM36. This is best for users already familiar with background job scheduling.
The Job Scheduling Wizard. This is best for users unfamiliar with SAP background job scheduling. To use the Job Wizard, start from Transaction SM36, and either select Goto ® Wizard version or simply use the Job Wizard button.
Procedure
Call Transaction SM36 or choose CCMS ® Jobs ® Definition .
Assign a job name. Decide on a name for the job you are defining and enter it in the Job Name field.
Set the jobu2019s priority, or "Job Class":
High priority: Class A
Medium priority: Class B
Low priority: Class C
In the Target server field, indicate whether to use system load balancing.
For the system to use system load balancing to automatically select the most efficient application server to use at the moment, leave this field empty.
To use a particular application server to run the job, enter a specific target server.
If spool requests generated by this job are to be sent to someone as email, specify the email address. Choose the Spool list recipient button.
Define when the job is to start by choosing Start Condition and completing the appropriate selections. If the job is to repeat, or be periodic, check the box at the bottom of this screen.
Define the jobu2019s steps by choosing Step, then specify the ABAP program, external command, or external program to be used for each step.
Save the fully defined job to submit it to the background processing system.
When you need to modify, reschedule, or otherwise manipulate a job after you've scheduled it the first time, you'll manage jobs from the Job Overview.
pls give points if it is usefull
Regards
Saimedha

How to schedule a background Job based on events

Hi,
We are on 4.6 C.
We have a background job that has two ABAP programs.
We need to start the 2nd ABAP program only after the first one has run successfully.
If the second ABAP program does not run, the the job should have a status "FINISHED".
Help appreciated.
Thanks
Mala

Hi,
How to schedule a background Job based on events,please refer to the follow SAP help:
You can use events that have already been defined, or you can create new events for scheduling background jobs.
If you wish to use new events, do the following to implement the event scheduling:
Define and transport the event as a user event with transaction SM62.
You must define only event IDs; event arguments are not defined in the R/3 System. Instead, you specify event arguments when you schedule a job to wait for an event and when you trigger the event.
If you define a new event, you must also transport it to your production systems. The event transaction does not have a connection to the transport system. Instead, you must create a transport request for the event yourself.
Do this to transport an event:
Create a transport request.
Start the editor in the transport request and enter the following:
R3TR TABU <table name> where table name is BTCSEV for a system event ID, BTCUEV for a user event ID.
Press F2 with the cursor on the table name to call up the screen for specifying the table entries to transport. In this screen, enter the event IDs that you have created.
Save and release the transport request. Ensure that it is imported into your production system(s).
To trigger an event, add:
the function module BP_EVENT_RAISE to your ABAP program, or
the program SAPEVT to your external script, batch file, or program.
When your programs execute these keywords, an event will be triggered in the R/3 background processing system. The event-based scheduler is started immediately. It in turn starts all jobs that were waiting upon the event, subject to normal background processing restrictions, such as the requirement that the job has been released to start.
Schedule the jobs that are to run when your events are triggered.
You can schedule jobs for one-time start or to be started whenever an event is triggered.
Regards,
collysun

How to schedule a background job using the Event concept..?

Hi Folks,
I have a requirement that, I need a schedule a background job.
Once after the previous job successful only, new job should get triggered. How to go ahead with this..?
For Eg, I am scheduling a job called ZTEST periodically for 1 minute. If the job is not get completing with in 1 minute, I dont want to start my new job. Only after the success of my old job, I want my new job to run.
Waiting for ur replies.
Regards,
Savi.

Hi,
You can use events that have already been defined, or you can create new events for scheduling background jobs.
If you wish to use new events, do the following to implement the event scheduling:
Define and transport the event as a user event with transaction SM62.
You must define only event IDs; event arguments are not defined in the R/3 System. Instead, you specify event arguments when you schedule a job to wait for an event and when you trigger the event.
If you define a new event, you must also transport it to your production systems. The event transaction does not have a connection to the transport system. Instead, you must create a transport request for the event yourself.
Do this to transport an event:
Create a transport request.
Start the editor in the transport request and enter the following:
R3TR TABU <table name> where table name is BTCSEV for a system event ID, BTCUEV for a user event ID.
Press F2 with the cursor on the table name to call up the screen for specifying the table entries to transport. In this screen, enter the event IDs that you have created.
Save and release the transport request. Ensure that it is imported into your production system(s).
To trigger an event, add:
the function module BP_EVENT_RAISE to your ABAP program, or
the program SAPEVT to your external script, batch file, or program.
When your programs execute these keywords, an event will be triggered in the R/3 background processing system. The event-based scheduler is started immediately. It in turn starts all jobs that were waiting upon the event, subject to normal background processing restrictions, such as the requirement that the job has been released to start.
Schedule the jobs that are to run when your events are triggered.
You can schedule jobs for one-time start or to be started whenever an event is triggered.
Regards,
Raj.

How to schedule the background job daily twice?

Hi,
How to schedule the background job daily twice? any conditions?
Regards,
Srihitha

see the step by step procedure.
Scheduling Background Jobs:
1. Background jobs are scheduled by Basis administrators using transaction SM36.
2. To run a report in a background, a job needs to be created with a step using the report name
and a variant for selection parameters. It is recommended to create a separate variant for each
scheduled job to produce results for specific dates (e.g. previous month) or organizational units (e.g.
company codes).
3. While defining the step, the spool parameters needs to be specified
(Step-> Print Specifications->Properties) to secure the output of the report and help authorized users
to find the spool request. The following parameters needs to be maintained:
a. Time of printing: set to Send to SAP spooler Only for now
b. Name abbreviated name to identify the job output
c. Title free form description for the report output
d. Authorization a value defined by Security in user profiles to allow those users to access
this spool request (authorization object S_SPO_ACT, value SPOAUTH). Only users with matching
authorization value in their profiles will be able to see the output.
e. Department set to appropriate department/functional area name. This field can be used in
a search later.
f. Retention period set to Do not delete if the report output needs to be retained for more
than 8 days. Once the archiving/document repository solution is in place the spool requests could
be automatically moved to the archive/repository. Storage Mode parameter on the same screen
could be used to immediately send the output to archive instead of creating a spool request.
Configuring user access:
1. To access a report output created by a background job, a user must have at
least access to SP01 (Spool requests) transaction without restriction on the user
name (however by itself it will not let the user to see all spool requests). To have
that access the user must have S_ADMI_FCD authorization object in the profile with
SPOR (or SP01) value of S_ADMI_FCD parameter (maintained by Security).
2. To access a particular jobs output in the spool, the user must have
S_SPO_ACT object in the profile with SPOAUTH parameter matching the value used
in the Print Specifications of the job (see p. 3.d above).
3. Levels of access to the spool (display, print once, reprint, download, etc) are
controlled by SPOACTION parameter of S_SPO_ACT. The user must have at least
BASE access (display).
On-line reports:
1. Exactly the same configuration can be maintained for any output produced
from R/3. If a user clicks Parameters button on a SAP Printer selection dialog, it
allows to specify all the parameters as described in p. 3 of
Scheduling background jobs section. Thus any output created by an online report
can be saved and accessed by any user authorized to access that spool request
(access restriction provided by the Authorization field of the spool request
attributes, see p. 3.d of Scheduling background jobs section).
Access to reports output:
1. A user that had proper access (see Configuring user access above) can
retrieve a job/report output through transaction SP01.
2. The selection screen can be configured by clicking Further selection
criteria button (e.g. to bring Spool request name (suffix 2) field or hide other
fields).
3. The following fields can be used to search for a specific output (Note that
Created By must be blank when searching for scheduled jobs outputs)
a. Spool request name (suffix 2) corresponds to a spool name in p. 3.b in
Scheduling background jobs section above).
b. Date created to find an output of a job that ran within a certain date range.
c. Title corresponds to spool Title in p. 3.c in Scheduling background jobs
section above).
d. Department - corresponds to spool Department in p. 3.e in Scheduling
background jobs section above).
4. Upon entering selection criteria, the user clicks the Execute button to
retrieve the list of matching spool requests.
5. From the spool list the user can use several function such as view the
content of a spool request, print the spool request, view attributed of the spool
request, etc. (some functions may need special authorization, see p.3 in
Configuring user access)
a. Click the Print button to print the spool request with the default attributes
(usually defined with the job definition). It will print it on a printer that was
specified when a job was created.
b. Click the Print with changed attributed button to print the spool request
with the different attributes (e.g. changing the printer name).
c. Click the Display contents button to preview the spool request contents. A
Print and Download functions are available from the preview mode.

Scheduling a Background Job for PM/CO Settlements (KO8G)

Hi All,
I've created variants for settlements of PM & CO orders using transaction KO8G. Now I want to schedule a background job using TCode SM36. What program name/ABAP name should I use for settlements when scheduling background jobs?
Regards,
Tso

Hello Tso,
Try transaction SCMO which provides you the option to set
the start date to finish date and can also set the start time and
finish time and allows you to specify the variant to be used.
When in transaction KO8G fill out the fields as you wish them for
the background job and then same the selection as a variant. There is
an option to have the variant for background jobs and save the variant
then you can specify this variant in the SCMO screen.
SCMO is the sceduele manager which will allow you to scehedule many
jobs as necessary.
Some notes:
332149 SCMA: Required workflow settings
325118 Schedule Manager: link customer-specific reports
317601 Schedule Manager: Customer reports for multilevel worklist
332149 SCMA: Required workflow settings
891042 SCHEDMAN: Automatic start of several flow definitions
I hope this helps.
Regards,
Lucas

Scheduling a background job depending on the output lenght.

Hi every one,
I have a small requirement. My client want me to run a program in a foreground if the output is small and should the program in background if the output is large.This has to be achieved through coding. The program downloads the netprices of products. The downloaded file is of .dat format. It is an urgent requirement.
Guys you would throughly rewarded for your help.
Thanks,
Kumar.9886185040.

Hi Nag
that is not possible with codeing. To create a schedule a background job for the same program depending on its output is not possible.
being a programmer you need to decide, how long the code will take to execute.. accordingly you can either schedule or run in foreground. You can make some mandatory fields in the selection screen, so that the output is big mostly.
see the sample code for the Job scheduling using the fun modules
IF p_bjob = 'X'.
CONCATENATE sy-cprog sy-datum sy-uzeit
INTO jobname SEPARATED BY '_'.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = jobname
IMPORTING
jobcount = jobcount
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
IMPORTING
out_archive_parameters = arc_params
out_parameters = print_params
valid = valid
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF valid = chk.
SUBMIT yREP WITH s_kunnr IN s_cust
AND RETURN
USER sy-uname
VIA JOB jobname
NUMBER jobcount
TO SAP-SPOOL
SPOOL PARAMETERS print_params
ARCHIVE PARAMETERS arc_params
WITHOUT SPOOL DYNPRO.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = jobcount
jobname = jobname
strtimmed = 'X'
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
invalid_target = 8
OTHERS = 9.
IF sy-subrc 0.
* MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
* WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
MESSAGE i029 WITH jobname.
ENDIF.
ELSE.
MESSAGE s000 WITH text-003.
STOP.
ENDIF.
ENDIF.
Also,
Yes you can use job functions:
JOB_OPEN
JOB_SUBMIT
JOB_CLOSE
* You can add multiple steps into one job by using JOB_SUBMIT.
Regards
JJ

Schedule a background job for a program using ABAP code.

Hi,
I have to write a program to schedule a background job for another program.
Need your help to understand how we can achieve this functionality.Any example of an abap code would be of great help.
Need it urgently.
Thanks in advance.
Sandeep.

Hi Sandeep,
Here is the demo program regarding the BDC For the background job.
report zprprbdc1
       no standard page heading line-size 255.
include bdcrecx1.
parameters: dataset(132) lower case.
***    DO NOT CHANGE - the generated data section - DO NOT CHANGE    ***
*   If it is nessesary to change the data section use the rules:
*   1.) Each definition of a field exists of two lines
*   2.) The first line shows exactly the comment
*       '* data element: ' followed with the data element
*       which describes the field.
*       If you don't have a data element use the
*       comment without a data element name
*   3.) The second line shows the fieldname of the
*       structure, the fieldname must consist of
*       a fieldname and optional the character '_' and
*       three numbers and the field length in brackets
*   4.) Each field must be type C.
*** Generated data section with specific formatting - DO NOT CHANGE ***
***data: begin of itab occurs 0 ,
***       matnr(20) type c,
***       mbrsh(30) type c,
***       mtart(30) type c,
***       kzsel(20) type c,
***       maktx(40) type c,
***       meins(5) type c,
***       end of itab.
data: begin of record occurs 0,
* data element: MATNR
        matnr_001(018),
* data element: MBRSH
        mbrsh_002(001),
* data element: MTART
        mtart_003(004),
* data element: XFELD
        kzsel_01_004(001),
* data element: MAKTX
        maktx_005(040),
* data element: MEINS
        meins_006(003),
* data element: MTPOS_MARA
        mtpos_mara_007(004),
      end of record.
*** End generated data section ***
start-of-selection.
*perform open_dataset using dataset.
perform open_group.
**do.
**read dataset dataset into record.
**if sy-subrc <> 0. exit. endif.
call function 'GUI_UPLOAD'
exporting
    filename                      = 'c:\jitu\bdc\10002.txt'
   filetype                      = 'ASC'
   has_field_separator           = 'x'
*   HEADER_LENGTH                 = 0
*   READ_BY_LINE                  = 'X'
*   DAT_MODE                      = ' '
*   CODEPAGE                      = ' '
*   IGNORE_CERR                   = ABAP_TRUE
*   REPLACEMENT                   = '#'
*   CHECK_BOM                     = ' '
*   VIRUS_SCAN_PROFILE            =
*   NO_AUTH_CHECK                 = ' '
* IMPORTING
*   FILELENGTH                    =
*   HEADER                        =
tables
    data_tab                      = record
* EXCEPTIONS
*   FILE_OPEN_ERROR               = 1
*   FILE_READ_ERROR               = 2
*   NO_BATCH                      = 3
*   GUI_REFUSE_FILETRANSFER       = 4
*   INVALID_TYPE                  = 5
*   NO_AUTHORITY                  = 6
*   UNKNOWN_ERROR                 = 7
*   BAD_DATA_FORMAT               = 8
*   HEADER_NOT_ALLOWED            = 9
*   SEPARATOR_NOT_ALLOWED         = 10
*   HEADER_TOO_LONG               = 11
*   UNKNOWN_DP_ERROR              = 12
*   ACCESS_DENIED                 = 13
*   DP_OUT_OF_MEMORY              = 14
*   DISK_FULL                     = 15
*   DP_TIMEOUT                    = 16
*   OTHERS                        = 17
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
loop at record .
perform bdc_dynpro      using 'SAPLMGMM' '0060'.
perform bdc_field       using 'BDC_CURSOR'
                              'RMMG1-MATNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RMMG1-MATNR'
                              record-matnr_001.
perform bdc_field       using 'RMMG1-MBRSH'
                              record-mbrsh_002.
perform bdc_field       using 'RMMG1-MTART'
                              record-mtart_003.
perform bdc_dynpro      using 'SAPLMGMM' '0070'.
perform bdc_field       using 'BDC_CURSOR'
                              'MSICHTAUSW-DYTXT(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(01)'
                              record-kzsel_01_004.
perform bdc_dynpro      using 'SAPLMGMM' '4004'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BU'.
perform bdc_field       using 'MAKT-MAKTX'
                              record-maktx_005.
perform bdc_field       using 'BDC_CURSOR'
                              'MARA-MEINS'.
perform bdc_field       using 'MARA-MEINS'
                              record-meins_006.
perform bdc_field       using 'MARA-MTPOS_MARA'
                              record-mtpos_mara_007.
perform bdc_transaction using 'MM01'.
**enddo.
endloop.
perform close_group.
*perform close_dataset using dataset.
&*****************Reward point if helpful************&

Error when selecting system during scheduling of background job in RAR

Similar Messages

Maybe you are looking for