Error when sending control recipe to external destination
Hi,
When Iam trying to send control recipe to external destination through CO53, Iam getting the status of the control recipe as 'Sent'. But when I check the tRFC log, I get the status, "connection closed (no data) ".
By selecting the line in the log and executing the LUW I get the message, target system/gate way not active.
In the external system I get the message " Illigal activity"
I checked the RFC connection in SM59 and connection is ok.
The RFC is working from SE37 and the control recipe can be processed without any issues through SE37. The problem is when I try to send from CO53.
Request your expert advice to solve at the earliest.
Thanks in advance
Prathib
Hi Prathib, Have you got the solution to this problem
Similar Messages
-
RFC error when sending logon data
Hi;
We cannot configure the STMS of our development system. When we try to
configure it, system gives an error message: Errors during distribution
of tp configuration; TMS Alert Viewers tells us
RFC_COMMUNICATION_FAILURE: RFC communications error with
system/destination TMSADM-FKT.DOMAIN_FKT RFC error when sending logon
data and READ_PROFILE_FAILED:File
erptest\sapmnt\trans\bin\TPPARAM
could not be opened for reading (No such file or directory).
Is there any advise for solution?
Best regards
Noyan
PS: Please find the profiles below:
START:
#.* Start profile START_DVEBMGS00_erptest *
#.* Version = 000006 *
#.* Generated by user = BASIS *
#.* Generated on = 30.12.2010 , 15:40:55 *
generated by R3SETUP
SAPSYSTEMNAME = FKT
INSTANCE_NAME = DVEBMGS00
SAPSYSTEM = 00
SAPGLOBALHOST = erptest
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
start database
#_DB = strdbs.cmd
#Start_Program_02 = immediate $(DIR_EXECUTABLE)\$(_DB) FKT
start message server
#_MS = msg_server.exe
Start_Program_03 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
Start IGS
Start_Program_05 = local $(DIR_EXECUTABLE)$(DIR_SEP)igswd$(FT_EXE) -mode=profile pf=$(DIR_PROFILE)$(DIR_SEP)FKT_DVEBMGS00_erptest
start application server
#_DW = disp+work.exe
#Start_Program_04 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS
General parameters for starting the system
#parameter created by: BASIS 24.12.2007 23:53:27
#SAPSYSTEM = 00
#parameter created by: BASIS 24.12.2007 23:53:27
#SAPSYSTEMNAME = FKT
#parameter created by: BASIS 24.12.2007 23:53:27
#INSTANCE_NAME = DVEBMGS00
#parameter created by: BASIS 24.12.2007 23:53:27
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
#parameter created by: BASIS 24.12.2007 23:53:27
#SAPGLOBALHOST = erptest
Start database
#parameter created by: BASIS 24.12.2007 23:53:27
_DB = strdbs.cmd
#parameter created by: BASIS 24.12.2007 23:53:27
Start_Program_01 = immediate $(DIR_EXECUTABLE)\$(_DB) $(SAPSYSTEMNAME)
Start message server
#parameter created by: BASIS 24.12.2007 23:53:27
MS = msgserver.exe
#parameter created by: BASIS 24.12.2007 23:53:27
Start_Program_02 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
Start applications server
#parameter created by: BASIS 24.12.2007 23:53:27
_DW = disp+work.exe
#parameter created by: BASIS 24.12.2007 23:53:27
Start_Program_03 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
DEFAULT:
SAPDBHOST = ERPTEST
dbms/type = mss
dbs/mss/server = ERPTEST
dbs/mss/dbname = FKT
dbs/mss/schema = fkt
SAPSYSTEMNAME = FKT
SAPGLOBALHOST = erptest
SAPFQDN = tr.delta.is
SAPLOCALHOSTFULL = $(SAPLOCALHOST).$(SAPFQDN)
SAPDBHOST = erptest
SAPTRANSHOST = erptest
DIR_TRANS =
$(SAPTRANSHOST)\sapmnt\trans
#DIR_TRANS = D:\usr\sap\trans
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
SAP Message Server for ABAP
rdisp/mshost = erptest
rdisp/sna_gateway = erptest
rdisp/sna_gw_service = sapgw00
rdisp/vbname = erptest_FKT_00
rdisp/enqname = erptest_FKT_00
rdisp/btcname = erptest_FKT_00
rdisp/msserv = sapmsFKT
rdisp/msserv_internal = 3900
rdisp/bufrefmode = sendoff,exeauto
login/system_client = 200
#GUVENLIK PARAMETRELERI
login/password_expiration_time = 90
login/min_password_lng = 6
#parameter created by: BASIS 25.03.2004 08:41:25
rdisp/gui_auto_logout = 10800
#parameter created by: BASIS 25.03.2004 08:37:47
#old_value: 3 changed: BASIS 25.03.2004 08:42:38
login/fails_to_user_lock = 6
#validasyon geregi, g#venligi artirma ama#i - check active but no check for SRF
#parameter created by: BASIS 16.06.2007 17:35:41
#old_value: 2
#changed: BASIS 14.05.2008 15:24:55
auth/rfc_authority_check = 1
#otomatik unlocki iptal eder
#parameter created by: BASIS 10.11.2006 17:47:15
login/failed_user_auto_unlock = 0
#AUDIT PARAMETRELER?
#old_value: changed: BASIS 20.04.2005 17:13:37
rsau/max_diskspace/per_day = 1996800000
#old_value: 1000000000 changed: BASIS 20.04.2005 17:17:01
#old_value: 0 changed: BASIS 20.04.2005 17:19:12
rsau/max_diskspace/local = 2048000000
#old_value: 2000000000 changed: BASIS 28.03.2005 23:17:11
#old_value: 2 changed: BASIS 29.03.2005 12:09:14
#old_value: 0 changed: BASIS 20.04.2005 17:13:37
rsau/max_diskspace/per_file = 665600000
rsau/enable = 1
rsau/local/file = D:\usr\sap\FKT\DVEBMGS00\log\++++++++######..AUD
rsau/selection_slots = 12
#rec/client = ALL
DIR_AUDIT = D:\usr\sap\FKT\DVEBMGS00\log
FN_AUDIT = ++++++++######..AUD
#DIL PARAMETRELERI
#Turkish codepage settings
abap/import_char_conversion = 0
install/codepage/db/non_transp = 1610
install/codepage/db/transp = 1610
zcsa/installed_languages = DET
#zcsa/system_language = E
zcsa/system_language = T
zcsa/second_language = E
install/codepage/appl_server = 1610
#OS dependent
abap/locale_ctype = Turkish_turkey.28599
#DIR_PUT = D:\usr\sap\FKQ\upg\abap
*** UPGRADE EXTENSIONS (RELEASE "701") ***
#rdisp/msserv_internal = 3900
#system/type = ABAP
INSTANCE:
SAPSYSTEMNAME = FKT
SAPGLOBALHOST = erptest
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
icm/server_port_0 = PROT=HTTP,PORT=80$$
SAP Message Server parameters are set in the DEFAULT.PFL
ms/server_port_0 = PROT=HTTP,PORT=81$$
#rdisp/wp_no_dia = 10
#rdisp/wp_no_btc = 3
#rdisp/wp_no_enq = 1
#rdisp/wp_no_vb = 1
#rdisp/wp_no_vb2 = 1
#disp/wp_no_spo = 1
rdisp/wp_no_dia = 12
rdisp/wp_no_vb = 3
rdisp/wp_no_vb2 = 0
rdisp/wp_no_enq = 1
rdisp/wp_no_btc = 3
rdisp/wp_no_spo = 1
#PERFORMANS PARAMETRELERI
#parameter created by: SAP* 08.08.2001 10:30:18
abap/fieldexit = yes
#parameter created by: ALPER 13.10.2000 18:24:16
install/collate/active = 1
rdisp/max_wprun_time = 25000
MEMORY_NO_MORE_PAGING dump nedeniyle
#parameter created by: BASIS 27.12.2006 17:00:22
rdisp/PG_MAXFS = 262144
abap/heap_area_nondia = 2000000000
rdisp/PG_SHM = 16384
rdisp/ROLL_SHM = 32768
#'STORAGE_PARAMETERS_WRONG_SET' or 'TSV_TNEW_PAGE_ALLOC_FAILED'
#Note 552209 - Maximum memory utilization for processes on NT/Win2000
#parameter created by: BASIS 30.10.2007 10:57:24
#abap/heap_area_nondia = 50000
#parameter created by: BASIS 30.10.2007 10:58:54
#rdisp/PG_SHM = 0
#parameter created by: BASIS 30.10.2007 10:58:27
#rdisp/ROLL_SHM = 625
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:49:57
dbs/mss/stats_on = 1
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:49:33
dbs/oledb/stats_on = 1
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:48:23
dbs/oledb/add_procs = 8
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:47:29
rsdb/esm/max_objects = 2000
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:47:03
rsdb/otr/buffersize_kb = 4096
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:46:21
rsdb/esm/buffersize_kb = 4096
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:18:14
ztta/parameter_area = 16000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:16:43
enque/table_size = 10000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:16:20
gw/max_sys = 2000
#Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:16:01
gw/max_overflow_size = 25000000
#Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:15:19
rdisp/max_comm_entries = 2000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:14:48
rdisp/tm_max_no = 2000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:14:20
gw/max_conn = 2000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:13:42
rdisp/max_arq = 2000
#Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:12:57
ztta/roll_area = 3500000
#parameter created by: BASIS 18.05.2005 09:20:25
#old_value: 90 changed: BASIS 18.05.2005 09:22:25
rdisp/max_hold_time = 300
#parameter created by: BASIS 20.08.2003 12:10:20
#old_value: 6144
#changed: BASIS 03.01.2008 19:42:10
rsdb/obj/buffersize = 20000
#parameter created by: BASIS 20.08.2003 12:09:48
#old_value: 6000
#changed: BASIS 03.01.2008 19:42:59
rsdb/obj/max_objects = 20000
note 103747
#parameter created by: BASIS 08.07.2003 20:42:11
#old_value: 250000
#changed: BASIS 30.10.2007 10:56:17
#abap/buffersize = 100000
#changed: BASIS 03.01.2008 19:40:36
#abap/buffersize = 300000
#by: BASIS 12.06.2008
abap/buffersize = 400000
note 103747
#parameter created by: BASIS 08.07.2003 20:41:32
#zcsa/presentation_buffer_area = 20000000
#64 bite gectikten sonra by: BASIS 10.06.2008
zcsa/presentation_buffer_area = 30000768
note 103747
#parameter created by: BASIS 08.07.2003 20:40:55
rsdb/ntab/ftabsize = 30000
note 103747
#parameter created by: BASIS 08.07.2003 20:40:12
rtbb/max_tables = 500
note 103747
#parameter created by: BASIS 08.07.2003 20:39:15
#old_value: 20000
#changed: BASIS 03.01.2008 19:41:29
#rtbb/buffer_length = 30000
#64 bite gectikten sonra by: BASIS 10.06.2008
rtbb/buffer_length = 50000
note 103747
#parameter created by: BASIS 08.07.2003 20:38:26
zcsa/db_max_buftab = 10000
note 103747
#parameter created by: BASIS 08.07.2003 20:37:37
#zcsa/table_buffer_area = 50000000
#64 bite gectikten sonra by: BASIS 10.06.2008
#zcsa/table_buffer_area = 89000000
by: BASIS 12.06.08
zcsa/table_buffer_area = 99000000
note 103747
#parameter created by: BASIS 08.07.2003 20:36:54
sap/bufdir_entries = 10000
note 103747
#parameter created by: BASIS 08.07.2003 20:36:12
rsdb/cua/buffersize = 8000
#note 103747
#parameter created by: BASIS 08.07.2003 20:34:46
#old_value: 5000 changed: BASIS 08.07.2003 20:35:39
rsdb/ntab/sntabsize = 5500
#parameter created by: BASIS 08.07.2003 20:33:56
#note 103747
#old_value: 10607 changed: BASIS 08.07.2003 20:34:58
#old_value: 10000 changed: BASIS 08.07.2003 20:35:39
rsdb/ntab/irbdsize = 11000
#note 103747
#parameter created by: BASIS 08.07.2003 20:32:18
rsdb/ntab/entrycount = 40000
#old_value: 2076 changed: BASIS 28.06.2005 19:36:21
#old_value: 5735 changed: BASIS 28.06.2005 19:40:01
PHYS_MEMSIZE = 4096
#64 bite gectikten sonra by: BASIS 10.06.2008
abap/heaplimit = 40894464
abap/heap_area_total = 2000683008
ztta/roll_extension = 2000683008
em/blocksize_KB = 4096
*** UPGRADE EXTENSIONS (RELEASE "701") ***
#rdisp/elem_per_queue = 2000
#auth/auth_number_in_userbuffer = 9000
#snc/enable = 0Hi Srikishan;
You are right. The problem was releated with secstore. I found a SAP note ( Note 1532825 - Deleting SECSTORE entries during system export/system copy). I created the program which ise mentioned in the note and than run it. After that everything seems ok now.
Thanks for your help and interest
Best regards
Noyan -
Error when trying to create a JCO Destination
Hi
I receives the following error when trying to creat a JCO Destination, clicking on the button in the host:port/webdynpro/dispatcher/sap.com/tcwdtools/Explorer
I get the following error:
Error stacktrace:
java.lang.NullPointerException
at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:880)
at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateJCODestinations(NameDefinition.java:272)
at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateNavigation(NameDefinition.java:237)
at com.sap.tc.webdynpro.tools.sld.NameDefinition.wdDoInit(NameDefinition.java:144)
at com.sap.tc.webdynpro.tools.sld.wdp.InternalNameDefinition.wdDoInit(InternalNameDefinition.java:223)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:274)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:540)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:398)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:422)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:130)
at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:540)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:398)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.makeVisible(ViewManager.java:620)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.performNavigation(ViewManager.java:263)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:740)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:350)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:640)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:391)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:265)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Any ideas?
Regards
Kay-ArneHi,
Have you configured your SLD? Check JCO Destination error out or search for "com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus" in the SDN forums.
Best regards,
Vladimir -
Error when sending message: 500 Internal Server Error
Hi
IE is not accepting any messages,
when I try to send the messgae to the IE ( using RWB) i am getting the below error " Error when sending message: 500 Internal Server Error".
following things what i have noticed.
1. Pipleline URL is fine, both in the BS of XI and in the RFC destnation which i am maintaing on the IE admin) URL is "http://<host>:8000/sap/xi/engine?type=entry"
2. SICF all the XI serivess are up and running, i am able to test these service.
3. The http port is active ( SMICM )
Pls note the error is 500 Internal Server Error
regards
NisarI think in a simple term 500 can be said as "the request cannot be processed curretnly", these options mentieoned by you are not applicable in my case.
This generally occurs due to load problem or if you are on an SP less than 12 or even if there is an administration problem---I am on PI7.0 , what are the administration problem you are talking about?
1 Check Table Space is enough. ---i had installed server recently & very few interface running.
2 Server licence Date or Time. In this case change system date and restart server.---i have recently installed server.
3 Check the service pack levels on your XI. If it is obsolete upgrade it with latest versio----Can u explain more on this?
Try restart the java stack(XI Server) and follwing services.
com.sapii.af.app ---I am not passing trough Adater framework, so i dont think this service will matters....
com.sapii.cpa.af.app.---CPA cahe is done sucessfully, as i said i am not passsing through adapter framework.
basically for a simple HTTP post what might cause 500 error if all necessary services are up and running?
regards
Nisar -
Error when sending message: 404 not found
Hi,
New to XI, practicing file to jdbc scenario. File is pickedup from the source folder but nothing appearing on the receiver end ms access database.
In the Component Monitoring, tried sending message manually with all the right info in Integration engine, getting an error message saying:
"Error when sending message : 404 not found"
Also tried in Adapter Engine and the result same.
Before doing this scenario, I tried file - file scenario then also the sender file pickedup from source folder but nothing happend at the receiver end.
Any idea's?? what might be the issue????
Thanks,
Venu.Hi Venu,
"404 is a not found error", plz make a check of your URL you're using is correct? do you use the right port? Normally the port is 80<SystemNo>, so rather 8001 than 7001.
Also check in transaction SICF, if the node /sap/xi/adapter_plain has been activated, if not, activate it and try again.
If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
For your error, refer to the following threads:
Unable to find an associated SLD element
Unable to refresh cache contents in XI.
Unable to find an associated SLD element
Also check that the Adapter Engine is successfully registered in the SLD. To do this, call the Content Maintenance function in the SLD as follows:
http://<sld-host>:<sld-j2ee-port>/sld u2192 Administration u2192 Content Maintenance.
Select XI Adapter Framework.
Thirteen associations have to be registered.
(Source: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857)
If you can't find all the associations, then you will have to create the associations manually.
This is a very good blog which answers ur question:
check this weblog
https://weblogs.sdn.sap.com/pub/wlg/4061?page=last&x-showcontent=off [original link is broken] [original link is broken] [original link is broken]
Regards,
Vinod. -
Error when sending message: 500 Timeout
while sendin a message in the http to rfc scenario, im gettin this error message "Error when sending message: 500 Timeout".
can any1 throw some light on this.Hi venu,
you need to go to RZ10 and there select the profile instance and go with the extended maintance option in the change mode.
there are two ways you can change it:
1. check out note: 824554
TCODE - rz10
icm/server_port_0 = PROT=HTTP,PORT=8010,TIMEOUT=800,PROCTIMEOUT=800
(for 800 seconds)
8010 is my HTTP port so you have to change it:)
2. SXMB_ADM -> configure integration server -> change specific identifiers
runtime parameter:
Parameter HTTP_TIMEOUT
Meaning
Specifies the timeout for http connections (time between two data packages at line level). This value overrides the system profile parameter icm/server_port_n (for example, icm/server_port_0 : PROT=HTTP, PORT=50044, TIMEOUT=900). If you do not set the parameter HTTP_TIMEOUT or if you set the parameter to 0, then the setting for the system profile parameter is used.
Personally I only changed the one from the instance profile but the second one should work too
My suggestion is change only PROCTIMEOUT to 600 or 900 but dont change TIMEOUT. Imp thing is u need to restart the XI, then onlychanges will take place.
If these dosent work out go for changing TIMEOUT also. Just set the value for the instance and dont maintain the HTTP_Timeout in the sxmb_adm
Let me know what u have done , if it works
Thanks,
srini -
Test message from RWB: Error when sending message: 401 Unauthorized
Hi Experts,
While I am sending test message from RWB, I am getting following error:
Error when sending message: 401 Unauthorized
I am using correct userid/password as I am working with Repository/directory. Also in one of the test scenario files are picking up from folder but never got processed because of similar issue (HTTP_RESPONSE_CODE_NOT_OK) and SERVICE NOT AVAILABLE.
I am having SAP_ALL authorizations and few days back everything was fine.
I think something wrong with configuration in XI but I am unable to pin point.
Please help.
Regards,
GouravYes,
but
Role of Business System : Integration system
Corresponding Integ. Server : http://<XI server>:<http port>/sap/xi/engine?type=entry
How can I change it to Application system
and RUNTIME->IS_URL = http://<XI server>:<http port>/sap/xi/engine?type=entry
Regards,
Gourav -
RWB:Error when sending message: 404 Not Found
Dear all,
"i am getting error: Error when sending message: 404 Not Found"
while testing from rwb > Component Monitoring > Non-Central Adapter Engines > Adapter Engine AIPID > test message >
with send message to = http://pid:50000/sap/xi/engine?type=entry - pi server url
sld buss system > pipeline url http://pid:50000/sap/xi/engine?type=entry (same)
and my id comm channel > target host > bid.xxx.com with service no
(adapter type: xi
adapter engine: Integration server
address type: url address
target host: bid
service no: 8000
path: /sap/xi/engine?type=entry
i am working in nw2004s system)
while testing cache connectivity test from rwb > Component Monitoring
i got error:http://docs.google.com/Doc?id=dcdrq9jt_0g6j35p
green: Integration Repository
green: Integration Directory
green: Integration Server - JAVA
red:Adapter Engine af.axd.aipid
yello:Integration Server - ABAP
Adapter Engine af.axd.aipid > Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.00.aipid, string], target element type: SAP_BusinessSystem)
[Data Evaluation]: GlobalError
though if i try to send message from rwb...> with send message to field with : directly to bi rather than pipeline url through bi than message send successfully but not getting into component monitoring.
what should i do?
best regards,
dushyant.
refer this forum: is rwb's send message to field = sld>buss system>Pipeline URL?
and
SXI_CACHE
@8O@ Error during last attempt to refresh cache
LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM
Smq2 = 0
Sm58 = 0Hi,
If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
For your error, refer to the following threads:
Unable to find an associated SLD element
Unable to refresh cache contents in XI.
Unable to find an associated SLD element
Cheers
Manish -
Error when sending message: Method not implemented
Hi, All:
We have newly setup system and when we test sending test message from RWB, (RWB-Component Monitoring-Integration Engine-Test Tab), we got following error:
"Error when sending message: Method not implemented", I know this is related to post configuration issue, I just know someone has come cross the situation and how it was resolved.
Thanks
LiangHI Liang
Yes it looks like post installation problem. I have not come across this but i think you should check with the RFC created for IE while installation. To connect IE & AE and even the exchange profile if something is missing
Thanks
Gaurav -
Error when sending data request
Hi All,
i have scheduled info package for different type data sources in bi 7.0, for this i am getting the data from ecc 6.0 . all of this schedule's showing the status "error when sending data request" with the following details.
status
diagnosis
the request idoc could not be sent to the source system using rfc
system response
there is an idoc in the warehouse outbox that did not arrive in the ale inbox of the source system
in step by step analysis it is showing
rfc to source system successful showing with ash status
data selection successfully stated and finished ? show with red status
in that details tab
request : showing with green status
everything ok
extraction :showing with red status
missing messages
transfer(idocs and trfc) : missing messeges
processing(data packet) : no data
it is showing technical status with red as processing overdue
processing step call to source system
so it is showing error with 0 from 0 records.
please any body could help me for solving this error.
regards,
naveen.Hi
Seems you have connectivity issues between the Source system and Bi system.
You need to check whether you have data on R/3 side via RSA3 with Full / Delta Update Modes with Target System as your BI system.
RSA13--Source System -- Right click Connection parameters/check/Restore/Activate again Say Replicate All Data Sources (If Possible , provided if you have time because it consumes lot of time )
You need to check the tRFC Queue SM58/59 for any Stucks and WE19/20 for IDocs.
Much of BASIS Issue .
Hope it helps and clear -
IDoc_02_Error passing data to port-Communication error when sending with HTTP
Hello All,
We are receiving the error "02_Error passing data to port-Communication error when sending with HTTP", when sending the idoc to PI from ECC system.
Observation:
1. Some idocs are failing and immediately after sometime the same type of idocs with different idoc numbers are getting successful.
Eg: Orders. One purchase order is failing at one point of time. later another purchase order is getting successful after some time to the same partner.
2. If i perform the reset of idoc, then it is getting delivered during next scheduled job run.
please help me in resolving the issue.
Regards,
Ch. Venkat.status 02 is Error passing data to port ...it simply means your port setting has some problem. do configure your port setting and also in partner profile
Thanx and Regards
Arpan Maheshwari -
Error when sending message(e-mail) from Process Chain ?
Hello SDN s,
How ya all ?
I scheduled a Process Chain with Message option to send it to (U - INternet Address) email ID but it says some error in sending message. What could be the reason ?
The following is the Job Log Entries....
30.06.2006 18:05:53 Job started 00 516 S
30.06.2006 18:05:53 Step 001 started (program RSPROCESS, variant &0000000000261, user ID ALEREMOTE) 00 550 S
30.06.2006 18:05:54 Hierarchy/attribute change successfully carried out RSM 794 I
30.06.2006 18:06:00 Document <PV FOR GETTING MESSAGE THROUGH E-MAIL - SUCCE> could not be sent SO 654 S
30.06.2006 18:06:00 Error when sending message RSRA2 11 S
30.06.2006 18:06:01 Job finished 00 517 S
Thanks !!!
Best Regards....
Sankar Kumar
+91 98403 47141Hey yes, in that T.Code all the values are 0. What to do to activate that ????????????
Duration Duration
Completed Error In transit Waiting In transit Waiting
hh:mm hh:mm
B08(100) 0 0 0 0
FAX Telefax 0 0 0 0 0:00 0:00
5 INT Internet 0 0 0 0 0:00 0:00
SMTP 0 0 0 0:00 0:00
X40 X.400 0 0 0 0 0:00 0:00
RML R/Mail or 0 0 0 0 0:00 0:00
PAG 0 0 0 0 0:00 0:00
PRT 0 0 0 0 0:00 0:00
So, how to solve this issue ? how to send e-mails ? what configuration or settings to be done ?
could u give the steps to do that ? as i am the only one BW guy here !?
Thanks !!!
Best Regards....
Sankar -
Error when sending message: 403 Forbidden....sender si file
hi...
here iam working with File to IDoc scenario
file is picking from a particular source but its is not showing any messages in SXMB_MONI and in IDX5 (outbound) or in RWB.
when i check test my message in RWB its is showing Error when sending message: 403 Forbidden.
can anyone explain me this problem plz...
all my DESIGN and CONFIGURATION is fine....
its urgent...
THX..
john weslyHi John
403 Forbidden
The server understood the request, but is refusing to fulfill it. Authorization will not help and the request SHOULD NOT be repeated. If the request method was not HEAD and the server wishes to make public why the request has not been fulfilled, it SHOULD describe the reason for the refusal in the entity. If the server does not wish to make this information available to the client, the status code 404 (Not Found) can be used instead.
for more details on error code follow the link
http://www.web-cache.com/Writings/http-status-codes.html
http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
http://www.helpwithpcs.com/courses/html/html_http_status_codes.htm
first try to solve problem by making CACHE refresh
either by directory
Check whether you have given the right credentials. If you are very sure that you have given right credentials then your problem will be solved by restarting J2EE engine
steps to restart J2EE engine
1) run transaction SMICM
2) then in the tab administration => J2EE instance(local) =>send soft shutdown with restart
by this java engine will restart and will be up in 5-10 minutes and your problem will be solved
Thanks
sandeep sharma
PS ; if helpful kindly reward points -
Microsoft office 2013 error when send as attachment stopped working
microsoft office 2013 error when send as attachment stopped working please help me
Please make sure you have already installed the latest update for office.What happens if you use another user account to log on this computer?
In addition, a similar issue here is for your reference:
http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/excel-2013-crashes-every-time-sending-mail/8ddd32fe-138e-49d8-bda4-6558f440f726?page=2 -
Error in CO54 Control recipe.
Dear Experts,
I am not able to do TECO for process order as auto control recipe is being created,this is the status of my process order.
I have created massage through T-Code CO57 with massage category PI_CRST, Process order number,but I don't know which control recipe I have to select so that the when I am doing massage posting through T-Code CO54, it is giving error massage that it can not be posted. I have tried some of the control recipe number from F4, in CO57, but again the system gives the error massage while proceeding with CO54.
This is very critical as my client plant is nearly down as far as SAP is concerned.
Please do the needful by giving the detail steps to over come this error as TECO for this process order is a must.
Regards,
Rajesh.Dear,
The error given is as follows.
2.Destination PI04 COCI_CONFIRM_MATERIAL_CONSUMPTION cannot process the message
3.Message is not sent to and destination.
This error is because of CO57 where I don't know to select which Control recipe along with process order number in CO57. I tried selecting some of the control recipe from F4, but was of no use.
I just want to do TECO for the process order where status is control recipe created (which is being created automatically), so I am selecting Massage Category PI_CRST. But I don't know which control recipe to be selected along with Process order number for field Contol Recipe in CO57.
Regards,
Rajesh Prasad.
Maybe you are looking for
-
Ipod nano will not appear in itunes or windows, but my 30gb does
My wife has a 30gb ipod and that connects to itunes without any problems. I have a ipod nano (4th gen) and I cannot get it to be recognized by itunes or in windows. I have reset it, but it still does not come up to sync up. What should I do here?
-
No issues, but curious..why do I always get permissions repaired when I click on 'repair permissions' in Disk Utility ??......it usually has to do with core permissions and it's happened since i got this MacBook Pro in 3/11..I'll try this every 2/3 w
-
Final Cut Studio Vs Adobe Premiere Pro CS5.
What are the best reasons for purchasing Final Cut Studio over Adobe Premiere Pro CS5? Thanks!
-
Officejet All In One 6600 - Print from all Laptops but not Desktop
I got this printer for Xmas and have spent hours trying installing, reinstalling using Scan/Print Doctor software, etc. I run a home network through Uverse Gateway. The router is a 2Wire 3800HGV-B. I am not runing a firewall on my desktop just A/v
-
Should I use JMS or any alternative?
Hi, I need to implement multi-client server system and I have a problem in its architecture. Any help would be great! The system works as follows. The clients ask for some services, and the server checks the database whether this service is available