Error when sending infotype 2 via ALE - start date

Hi all,
we are facing the following error when using the standard method for HR distribution: changes in infotype 2 cannot be processed in the receiving system; each change results in a 51 error in the iDoc, with message "PA0002 could not be updatedu201D (msg number 5-108).
For some background: we're using message type HRMD_A06 and the standard configuration as described in the "ALE Quickstart" document. We've sent the full set of employee data via report RHALEINI, and use RBMDIDOC and change pointers to send changes on a daily basis. All infotypes are updated correctly except 2.
From our tests, it seems that the problem is the following:
- the initial send via RHALEINI created infotype 2 records with start date 01.01.1900. The sent iDocs had at the level E1P1TYP for infotype 2, start date 01.01.1800
- the daily report RBMDIDOC is sending the infotype 2 records with their real start date (i.e. birthdate of the employee). Since this is later than 01.01.1900, the replacement of one infotype by another in the receiving system fails. By manually changing the start date of infotype 2 in the receiving system, the next update is successful --but we do not want to manually update all records in the receiving system.
Has anyone else faced this or a similar issue with RHALEINI and infotype start dates?
Thanks in advance,
Mariana
Edited by: Mariana Lasprilla on Feb 5, 2009 10:35 AM

The mystery has been solved: customer system had a conversion rule for message type HRMD_A in order to send a fixed value of BEGDA for all infotype 2 records.
ALE conversion rules are set via table TBD30.

Similar Messages

  • "Rend Error" when sending image via iChat/AIM

    On my brand new iMac aluminum, I am unable to send, and friends are unable to send, images via iChat AIM 3.1.8 (V445). When either of us try to send, we get the message "An undefined AIM error has occured. The server message was: Rend: Error"
    I then spin around and use my old G4 iMac to send an image - no problem. My buddy is also able to send to me, no problem.
    Both computers are connected to the same Linksys WRT54G router. When I searched for the term 'rend' only one thread came back which suggested to change the port from 5190 to 443. I did this and it didn't help.
    Any other suggestions?

    Hi Craig,
    In the Linksys set up pages you have Application and Gaming (Which is where I think you are talking about)
    In there there are several options.
    Port Forwarding, Port Triggering, DMZ (possibly UPnP Forwarding and QoS)
    Disable any Port Forwarding or Port Triggering. DO not use the DMZ.
    Save settings. (you should still have Web browsing and Mail abilities).
    GO to the Administration tab on the top row.
    Enable UPnP.
    Save Settings.
    UPnP allows multiple computers to use the same ports.
    This way the Linksys can be left doing DHCP if you wish and it will not matter if your computer gets a new IP every now and then. Also the Ports are opened by the application and close after a timed period of non use.
    You can limit the "Hops" to the number of devices the computer is from the Linksys (1 ?) to make it more secure.
    On the main set up page you could limit the the DHCP range to the number of computers you have to prevent outside connections.
    The ports you describe so far are only the TExt chatting and file sending ports
    11:23 AM Monday; August 13, 2007

  • Not delivered error when sending photos via messages-photos being received

    When using messages on iPhone 5 to send photos, I receive a not delivered error but the recipient tells me it has been received. I have tried turning phone off/on, signing out of messages on all devices then signing back in. Still occurring. Any ideas??

    Hello tsbnewtomac,
    The article linked below provides some useful troubleshooting steps that can help get Messages working correctly.
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Cheers,
    Allen

  • Why do I get an undelivered error when sending pictures via iMessage?

    When I send picture messages to other iPhone users, I get an error that it was undelivered even though the other person received the picture. I have to send the message as a text to remove the error on my phone. Then the other person receives the same message multiple times. I do not have this issue when I send a picture to a non-Apple phone

    Have you tried to download anything else?

  • Error when sending photo via email

    Hi
    I recieve this message when trying to send an photo via email from iphoto.
    "The email server didn’t recognize your username/password combination".
    There is no option to change/re-enter password that I can see.
    Any ideas

    what version of iPhoto?
    in iPhoto '11 re-enter the information under the accounts tab  in the iPhoto preferences
    LN

  • "Message Not Sent" Error When sending picture via text message

    I have a Droid 2 and I am unable to send a text with a picture.  I use the phone in the field and need to send images of land with a text message but so far am unable to do so.  I have checked my options settings in My Verizon and do not see anything that may be preventing from doing this function.  It is not a signal strength problem.  Also this is not an intermittent problem.  It just will not send a text with a picture 100% of the time.  Not having a problem with regular texting.  Can anyone help.  Thanks

    Thank you community!
    Hello dash9,
    The community gave great options.  I know the picture messaging is important to your job.  If the community suggestion did not assist I would like to help.  Are you able to send pictures when you are not in the field?  When you are unable to send a picture are you able to access the internet?  Have you successfully sent a mms in this area before?  Please advise me of this information so I may further assist.  Thank you. 

  • Error when sending data request

    Hi All,
       i have scheduled info package for different type data sources in bi 7.0, for this i am getting the data from  ecc 6.0 . all of this schedule's showing  the status "error when sending data request" with the following details.
    status
    diagnosis
    the request idoc could not be sent to the source system using rfc
    system response
    there is an idoc in the warehouse outbox that did not arrive in the ale inbox of the source system
      in step by step analysis it is showing
       rfc to source system successful showing with ash status
       data selection successfully stated  and finished ? show with red status
    in that details tab
    request : showing with green status
    everything ok
    extraction :showing with red status
    missing messages
    transfer(idocs and trfc) : missing messeges
    processing(data packet) : no data
        it is showing technical status with red as processing overdue
                           processing step call to source system
       so it is showing error with 0 from 0 records.
    please any body could help me for solving this error.
    regards,
    naveen.

    Hi
    Seems you have connectivity issues between the Source system and Bi system.
    You need to check whether you have data on R/3 side via RSA3 with Full / Delta Update Modes with Target System as your BI system.
    RSA13--Source System -- Right click Connection parameters/check/Restore/Activate again Say Replicate All Data Sources (If Possible , provided if you have time because it consumes lot of time )
    You need to check the tRFC Queue SM58/59 for any Stucks and WE19/20 for IDocs.
    Much of BASIS Issue .
    Hope it helps and clear

  • RFC error when sending logon data

    Hi;
    We cannot configure the STMS of our development system. When we try to
    configure it, system gives an error message: Errors during distribution
    of tp configuration; TMS Alert Viewers tells us
    RFC_COMMUNICATION_FAILURE: RFC communications error with
    system/destination TMSADM-FKT.DOMAIN_FKT RFC error when sending logon
    data and READ_PROFILE_FAILED:File
    erptest\sapmnt\trans\bin\TPPARAM
    could not be opened for reading (No such file or directory).
    Is there any advise for solution?
    Best regards
    Noyan
    PS: Please find the profiles below:
    START:
    #.*       Start profile START_DVEBMGS00_erptest                                                                                *
    #.*       Version                 = 000006                                                                                *
    #.*       Generated by user = BASIS                                                                                *
    #.*       Generated on = 30.12.2010 , 15:40:55                                                                                *
    generated by R3SETUP
    SAPSYSTEMNAME = FKT
    INSTANCE_NAME = DVEBMGS00
    SAPSYSTEM = 00
    SAPGLOBALHOST = erptest
    DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
    start database
    #_DB = strdbs.cmd
    #Start_Program_02 = immediate $(DIR_EXECUTABLE)\$(_DB) FKT
    start message server
    #_MS = msg_server.exe
    Start_Program_03 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
    Start IGS
    Start_Program_05 = local $(DIR_EXECUTABLE)$(DIR_SEP)igswd$(FT_EXE) -mode=profile pf=$(DIR_PROFILE)$(DIR_SEP)FKT_DVEBMGS00_erptest
    start application server
    #_DW = disp+work.exe
    #Start_Program_04 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS
      General parameters for starting the system
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    #SAPSYSTEM = 00
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    #SAPSYSTEMNAME = FKT
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    #INSTANCE_NAME = DVEBMGS00
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    #SAPGLOBALHOST = erptest
      Start database
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    _DB = strdbs.cmd
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    Start_Program_01 = immediate $(DIR_EXECUTABLE)\$(_DB) $(SAPSYSTEMNAME)
      Start message server
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    MS = msgserver.exe
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    Start_Program_02 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
      Start applications server
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    _DW = disp+work.exe
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    Start_Program_03 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
    DEFAULT:
    SAPDBHOST = ERPTEST
    dbms/type = mss
    dbs/mss/server = ERPTEST
    dbs/mss/dbname = FKT
    dbs/mss/schema = fkt
    SAPSYSTEMNAME = FKT
    SAPGLOBALHOST = erptest
    SAPFQDN = tr.delta.is
    SAPLOCALHOSTFULL = $(SAPLOCALHOST).$(SAPFQDN)
    SAPDBHOST = erptest
    SAPTRANSHOST = erptest
    DIR_TRANS =
    $(SAPTRANSHOST)\sapmnt\trans
    #DIR_TRANS = D:\usr\sap\trans
    DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
    SAP Message Server for ABAP
    rdisp/mshost = erptest
    rdisp/sna_gateway = erptest
    rdisp/sna_gw_service = sapgw00
    rdisp/vbname = erptest_FKT_00
    rdisp/enqname = erptest_FKT_00
    rdisp/btcname = erptest_FKT_00
    rdisp/msserv = sapmsFKT
    rdisp/msserv_internal = 3900
    rdisp/bufrefmode = sendoff,exeauto
    login/system_client = 200
    #GUVENLIK PARAMETRELERI
    login/password_expiration_time = 90
    login/min_password_lng = 6
    #parameter created                          by: BASIS        25.03.2004 08:41:25
    rdisp/gui_auto_logout = 10800
    #parameter created                          by: BASIS        25.03.2004 08:37:47
    #old_value: 3                                 changed: BASIS 25.03.2004 08:42:38
    login/fails_to_user_lock = 6
    #validasyon geregi, g#venligi artirma ama#i - check active but no check for SRF
    #parameter created                          by: BASIS        16.06.2007 17:35:41
    #old_value: 2
    #changed:  BASIS         14.05.2008  15:24:55
    auth/rfc_authority_check = 1
    #otomatik unlocki iptal eder
    #parameter created                          by: BASIS        10.11.2006 17:47:15
    login/failed_user_auto_unlock = 0
    #AUDIT PARAMETRELER?
    #old_value:                                   changed: BASIS 20.04.2005 17:13:37
    rsau/max_diskspace/per_day = 1996800000
    #old_value: 1000000000                        changed: BASIS 20.04.2005 17:17:01
    #old_value: 0                                 changed: BASIS 20.04.2005 17:19:12
    rsau/max_diskspace/local = 2048000000
    #old_value: 2000000000                        changed: BASIS 28.03.2005 23:17:11
    #old_value: 2                                 changed: BASIS 29.03.2005 12:09:14
    #old_value: 0                                 changed: BASIS 20.04.2005 17:13:37
    rsau/max_diskspace/per_file = 665600000
    rsau/enable = 1
    rsau/local/file = D:\usr\sap\FKT\DVEBMGS00\log\++++++++######..AUD
    rsau/selection_slots = 12
    #rec/client = ALL
    DIR_AUDIT = D:\usr\sap\FKT\DVEBMGS00\log
    FN_AUDIT = ++++++++######..AUD
    #DIL PARAMETRELERI
    #Turkish codepage settings
    abap/import_char_conversion = 0
    install/codepage/db/non_transp = 1610
    install/codepage/db/transp = 1610
    zcsa/installed_languages = DET
    #zcsa/system_language = E
    zcsa/system_language = T
    zcsa/second_language = E
    install/codepage/appl_server = 1610
    #OS dependent
    abap/locale_ctype = Turkish_turkey.28599
    #DIR_PUT = D:\usr\sap\FKQ\upg\abap
       *** UPGRADE EXTENSIONS (RELEASE "701") ***
    #rdisp/msserv_internal = 3900
    #system/type = ABAP
    INSTANCE:
    SAPSYSTEMNAME = FKT
    SAPGLOBALHOST = erptest
    SAPSYSTEM = 00
    INSTANCE_NAME = DVEBMGS00
    DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
    DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
    icm/server_port_0 = PROT=HTTP,PORT=80$$
    SAP Message Server parameters are set in the DEFAULT.PFL
    ms/server_port_0 = PROT=HTTP,PORT=81$$
    #rdisp/wp_no_dia = 10
    #rdisp/wp_no_btc = 3
    #rdisp/wp_no_enq = 1
    #rdisp/wp_no_vb = 1
    #rdisp/wp_no_vb2 = 1
    #disp/wp_no_spo = 1
    rdisp/wp_no_dia = 12
    rdisp/wp_no_vb = 3
    rdisp/wp_no_vb2 = 0
    rdisp/wp_no_enq = 1
    rdisp/wp_no_btc = 3
    rdisp/wp_no_spo = 1
    #PERFORMANS PARAMETRELERI
    #parameter created                          by: SAP*         08.08.2001 10:30:18
    abap/fieldexit = yes
    #parameter created                          by: ALPER        13.10.2000 18:24:16
    install/collate/active = 1
    rdisp/max_wprun_time = 25000
    MEMORY_NO_MORE_PAGING dump nedeniyle
    #parameter created                          by: BASIS        27.12.2006 17:00:22
    rdisp/PG_MAXFS = 262144
    abap/heap_area_nondia = 2000000000
    rdisp/PG_SHM = 16384
    rdisp/ROLL_SHM = 32768
    #'STORAGE_PARAMETERS_WRONG_SET' or 'TSV_TNEW_PAGE_ALLOC_FAILED'
    #Note 552209 - Maximum memory utilization for processes on NT/Win2000
    #parameter created                          by: BASIS        30.10.2007 10:57:24
    #abap/heap_area_nondia = 50000
    #parameter created                          by: BASIS        30.10.2007 10:58:54
    #rdisp/PG_SHM = 0
    #parameter created                          by: BASIS        30.10.2007 10:58:27
    #rdisp/ROLL_SHM = 625
    #EWA report 12.2007
    #parameter created                          by: BASIS        03.01.2008 19:49:57
    dbs/mss/stats_on = 1
    #EWA report 12.2007
    #parameter created                          by: BASIS        03.01.2008 19:49:33
    dbs/oledb/stats_on = 1
    #EWA report 12.2007
    #parameter created                          by: BASIS        03.01.2008 19:48:23
    dbs/oledb/add_procs = 8
    #EWA report 12.2007
    #parameter created                          by: BASIS        03.01.2008 19:47:29
    rsdb/esm/max_objects = 2000
    #EWA report 12.2007
    #parameter created                          by: BASIS        03.01.2008 19:47:03
    rsdb/otr/buffersize_kb = 4096
    #EWA report 12.2007
    #parameter created                          by: BASIS        03.01.2008 19:46:21
    rsdb/esm/buffersize_kb = 4096
    Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:18:14
    ztta/parameter_area = 16000
    Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:16:43
    enque/table_size = 10000
    Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:16:20
    gw/max_sys = 2000
    #Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:16:01
    gw/max_overflow_size = 25000000
    #Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:15:19
    rdisp/max_comm_entries = 2000
    Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:14:48
    rdisp/tm_max_no = 2000
    Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:14:20
    gw/max_conn = 2000
    Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:13:42
    rdisp/max_arq = 2000
    #Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:12:57
    ztta/roll_area = 3500000
    #parameter created                          by: BASIS        18.05.2005 09:20:25
    #old_value: 90                                changed: BASIS 18.05.2005 09:22:25
    rdisp/max_hold_time = 300
    #parameter created                          by: BASIS        20.08.2003 12:10:20
    #old_value: 6144
    #changed:  BASIS         03.01.2008  19:42:10
    rsdb/obj/buffersize = 20000
    #parameter created                          by: BASIS        20.08.2003 12:09:48
    #old_value: 6000
    #changed:  BASIS         03.01.2008  19:42:59
    rsdb/obj/max_objects = 20000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:42:11
    #old_value: 250000
    #changed:  BASIS         30.10.2007  10:56:17
    #abap/buffersize = 100000
    #changed:  BASIS         03.01.2008  19:40:36
    #abap/buffersize = 300000
    #by: BASIS 12.06.2008
    abap/buffersize = 400000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:41:32
    #zcsa/presentation_buffer_area = 20000000
    #64 bite gectikten sonra   by: BASIS 10.06.2008
    zcsa/presentation_buffer_area = 30000768
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:40:55
    rsdb/ntab/ftabsize = 30000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:40:12
    rtbb/max_tables = 500
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:39:15
    #old_value: 20000
    #changed:  BASIS         03.01.2008  19:41:29
    #rtbb/buffer_length = 30000
    #64 bite gectikten sonra  by: BASIS 10.06.2008
    rtbb/buffer_length = 50000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:38:26
    zcsa/db_max_buftab = 10000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:37:37
    #zcsa/table_buffer_area = 50000000
    #64 bite gectikten sonra   by: BASIS 10.06.2008
    #zcsa/table_buffer_area = 89000000
    by: BASIS 12.06.08
    zcsa/table_buffer_area = 99000000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:36:54
    sap/bufdir_entries = 10000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:36:12
    rsdb/cua/buffersize = 8000
    #note 103747
    #parameter created                          by: BASIS        08.07.2003 20:34:46
    #old_value: 5000                              changed: BASIS 08.07.2003 20:35:39
    rsdb/ntab/sntabsize = 5500
    #parameter created                          by: BASIS        08.07.2003 20:33:56
    #note 103747
    #old_value: 10607                             changed: BASIS 08.07.2003 20:34:58
    #old_value: 10000                             changed: BASIS 08.07.2003 20:35:39
    rsdb/ntab/irbdsize = 11000
    #note 103747
    #parameter created                          by: BASIS        08.07.2003 20:32:18
    rsdb/ntab/entrycount = 40000
    #old_value: 2076                              changed: BASIS 28.06.2005 19:36:21
    #old_value: 5735                              changed: BASIS 28.06.2005 19:40:01
    PHYS_MEMSIZE = 4096
    #64 bite gectikten sonra   by: BASIS  10.06.2008
    abap/heaplimit = 40894464
    abap/heap_area_total = 2000683008
    ztta/roll_extension = 2000683008
    em/blocksize_KB = 4096
       *** UPGRADE EXTENSIONS (RELEASE "701") ***
    #rdisp/elem_per_queue = 2000
    #auth/auth_number_in_userbuffer = 9000
    #snc/enable = 0

    Hi Srikishan;
    You are right. The problem was releated with secstore. I found a SAP note ( Note 1532825 - Deleting SECSTORE entries during system export/system copy). I created the program which ise mentioned in the note and than run it. After that everything seems ok now.
    Thanks for your help and interest
    Best regards
    Noyan

  • IDoc_02_Error passing data to port-Communication error when  sending with HTTP

    Hello All,
    We are receiving the error "02_Error passing data to port-Communication error when  sending with HTTP", when sending the idoc to PI from ECC system.
    Observation:
    1. Some idocs are failing and immediately after sometime the same type of  idocs with different idoc numbers are getting successful.
    Eg: Orders. One purchase order is failing at one point of time. later another purchase order is getting successful after some time to the same partner.
    2. If i perform the reset of idoc, then it is getting delivered during next scheduled job run.
    please help me in resolving the issue.
    Regards,
    Ch. Venkat.

    status 02 is     Error passing data to port ...it simply means your port setting has some problem. do configure your port setting and also in partner profile
    Thanx and Regards
    Arpan Maheshwari

  • Error when sending message: 500 Internal Server Error

    Hi
    IE is not accepting any messages,
    when I try to send the messgae to the IE ( using RWB) i am getting the below error " Error when sending message: 500 Internal Server Error".
    following things what i have noticed.
    1. Pipleline URL is fine, both in the BS of XI and in the RFC destnation which i am maintaing on the  IE admin) URL is  "http://<host>:8000/sap/xi/engine?type=entry"
    2. SICF all the XI serivess are up and running, i am able to test these service.
    3. The http port is active ( SMICM )
    Pls note the error is  500 Internal Server Error  
    regards
    Nisar

    I think in a simple term 500 can be said as "the request cannot be processed curretnly", these options mentieoned by you are not applicable in my case.
    This generally occurs due to load problem or if you are on an SP less than 12 or even if there is an administration problem---I am on PI7.0 , what are the administration problem you are talking about?
    1 Check Table Space is enough. ---i had installed server recently & very few interface running.
    2 Server licence Date or Time. In this case change system date and restart server.---i have recently installed server.
    3 Check the service pack levels on your XI. If it is obsolete upgrade it with latest versio----Can u explain more on this?
    Try restart the java stack(XI Server) and follwing services.
    com.sapii.af.app ---I am not passing trough Adater framework, so i dont think this service will matters....
    com.sapii.cpa.af.app.---CPA cahe is done sucessfully, as i said i am not passsing through adapter framework.
    basically for a simple HTTP post what might cause 500 error if all necessary services are up and running?
    regards
    Nisar

  • Error when sending message: 500 Timeout

    while sendin a message in the http to rfc scenario, im gettin this error message "Error when sending message: 500 Timeout".
    can any1 throw some light on this.

    Hi venu,
    you need to go to RZ10 and there select the profile instance and go with the extended maintance option in the change mode.
    there are two ways you can change it:
    1. check out note: 824554
    TCODE - rz10
    icm/server_port_0 = PROT=HTTP,PORT=8010,TIMEOUT=800,PROCTIMEOUT=800
    (for 800 seconds)
    8010 is my HTTP port so you have to change it:)
    2. SXMB_ADM -> configure integration server -> change specific identifiers
    runtime parameter:
    Parameter HTTP_TIMEOUT
    Meaning
    Specifies the timeout for http connections (time between two data packages at line level). This value overrides the system profile parameter icm/server_port_n (for example, icm/server_port_0 : PROT=HTTP, PORT=50044, TIMEOUT=900). If you do not set the parameter HTTP_TIMEOUT or if you set the parameter to 0, then the setting for the system profile parameter is used.
    Personally I only changed the one from the instance profile but the second one should work too
    My suggestion is change only PROCTIMEOUT to 600 or 900 but dont change TIMEOUT. Imp thing is u need to restart the XI, then onlychanges will take place.
    If these dosent work out go for changing TIMEOUT also. Just set the value for the instance and dont maintain the HTTP_Timeout in the sxmb_adm
    Let me know what u have done , if it works
    Thanks,
    srini

  • RWB:Error when sending message: 404 Not Found

    Dear all,
    "i am getting error:      Error when sending message: 404 Not Found"
    while testing from rwb > Component Monitoring   > Non-Central Adapter Engines >  Adapter Engine AIPID > test message >
    with send message to = http://pid:50000/sap/xi/engine?type=entry - pi server url
    sld buss system > pipeline url http://pid:50000/sap/xi/engine?type=entry (same)
    and my id comm channel > target host > bid.xxx.com with service no
    (adapter type: xi
    adapter engine: Integration server
    address type: url address
    target host: bid
    service no: 8000
    path: /sap/xi/engine?type=entry
    i am working in nw2004s system)
    while testing cache connectivity test from rwb > Component Monitoring 
    i got error:http://docs.google.com/Doc?id=dcdrq9jt_0g6j35p
    green: Integration Repository
    green: Integration Directory
    green: Integration Server - JAVA
    red:Adapter Engine af.axd.aipid
    yello:Integration Server - ABAP
    Adapter Engine af.axd.aipid > Attempt to fetch cache data from Integration Directory failed; cache could not be updated
    [Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.00.aipid, string], target element type: SAP_BusinessSystem)
    [Data Evaluation]: GlobalError
    though if i try to send message from rwb...> with send message to field with : directly to bi rather than pipeline url through bi than message send successfully but not getting into component monitoring.
    what should i do?
    best regards,
    dushyant.
    refer this forum: is rwb's send message to field = sld>buss system>Pipeline URL?
    and
    SXI_CACHE
    @8O@ Error during last attempt to refresh cache
    LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM
    Smq2 = 0
    Sm58 = 0

    Hi,
    If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
    http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
    For your error, refer to the following threads:
    Unable to find an associated SLD element
    Unable to refresh cache contents in XI.
    Unable to find an associated SLD element
    Cheers
    Manish

  • Error when sending message(e-mail) from Process Chain ?

    Hello SDN s,
    How ya all ?
    I scheduled a Process Chain with Message option to send it to (U - INternet Address) email ID but it says some error in sending message. What could be the reason ?
    The following is the Job Log Entries....
    30.06.2006 18:05:53 Job started                                                                          00        516         S    
    30.06.2006 18:05:53 Step 001 started (program RSPROCESS, variant &0000000000261, user ID ALEREMOTE)     00        550         S    
    30.06.2006 18:05:54 Hierarchy/attribute change successfully carried out                                RSM        794         I    
    30.06.2006 18:06:00 Document <PV FOR GETTING MESSAGE THROUGH E-MAIL - SUCCE> could not be sent          SO        654         S    
    30.06.2006 18:06:00 Error when sending message                                                        RSRA2        11         S    
    30.06.2006 18:06:01 Job finished                                                                        00        517         S    
    Thanks !!!
    Best Regards....
    Sankar Kumar
    +91 98403 47141

    Hey yes, in that T.Code all the values are 0. What to do to activate that ????????????
                                                                         Duration   Duration 
                             Completed  Error      In transit Waiting    In transit Waiting  
                                                                             hh:mm      hh:mm                                                                               
    B08(100)                        0          0          0          0                                                                               
    FAX Telefax              0          0          0          0       0:00       0:00
         5  INT Internet             0          0          0          0       0:00       0:00                                                                               
    SMTP              0          0          0                  0:00       0:00                                                                               
    X40 X.400                0          0          0          0       0:00       0:00
            RML R/Mail or            0          0          0          0       0:00       0:00
            PAG                      0          0          0          0       0:00       0:00
            PRT                      0          0          0          0       0:00       0:00
    So, how to solve this issue ? how to send e-mails ? what configuration or settings to be done ?
    could u give the steps to do that ? as i am the only one BW guy here !?
    Thanks !!!
    Best Regards....
    Sankar

  • Error when sending message: 404 not found

    Hi,
    New to XI, practicing file to jdbc scenario. File is pickedup from the source folder but nothing appearing on the receiver end ms access database.
    In the Component Monitoring, tried sending message manually with all the right info in Integration engine, getting an error message saying:
    "Error when sending message : 404 not found"
    Also tried in Adapter Engine and the result same.
    Before doing this scenario, I tried file - file scenario then also the sender file pickedup from source folder but nothing happend at the receiver end.
    Any idea's?? what might be the issue????
    Thanks,
    Venu.

    Hi Venu,
    "404 is a not found error", plz make a check of  your URL you're using is correct? do you use the right port? Normally the port is 80<SystemNo>, so rather 8001 than 7001.
    Also check in transaction SICF, if the node /sap/xi/adapter_plain has been activated, if not, activate it and try again.
    If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
    http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
    For your error, refer to the following threads:
    Unable to find an associated SLD element
    Unable to refresh cache contents in XI.
    Unable to find an associated SLD element
    Also check that the Adapter Engine is successfully registered in the SLD. To do this, call the Content Maintenance function in the SLD as follows:
    http://<sld-host>:<sld-j2ee-port>/sld u2192 Administration u2192 Content Maintenance.
    Select XI Adapter Framework.
    Thirteen associations have to be registered.
    (Source: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857)
    If you can't find all the associations, then you will have to create the associations manually.
    This is a very good blog which answers ur question:
    check this weblog
    https://weblogs.sdn.sap.com/pub/wlg/4061?page=last&x-showcontent=off [original link is broken] [original link is broken] [original link is broken]
    Regards,
    Vinod.

  • Test message from RWB: Error when sending message: 401 Unauthorized

    Hi Experts,
    While I am sending test message from RWB, I am getting following error:
    Error when sending message: 401 Unauthorized
    I am using correct userid/password as I am working with Repository/directory. Also in one of the test scenario files are picking up from folder but never got processed because of similar issue (HTTP_RESPONSE_CODE_NOT_OK) and SERVICE NOT AVAILABLE.
    I am having SAP_ALL authorizations and few days back everything was fine.
    I think something wrong with configuration in XI but I am unable to pin point.
    Please help.
    Regards,
    Gourav

    Yes,
    but
    Role of Business System : Integration system
    Corresponding Integ. Server : http://<XI server>:<http port>/sap/xi/engine?type=entry
    How can I change it to Application system
    and RUNTIME->IS_URL = http://<XI server>:<http port>/sap/xi/engine?type=entry
    Regards,
    Gourav

Maybe you are looking for

  • How do I NOT display zeroes in my spreadsheet

    I keep getting 0 in my spreadsheet and would prefer to show - as I was able to in Excel. Any one know how?

  • Issue with desktop Opt/Click (right click) & 'Change Desktop Background'

    I have an issue with the opt/click in the desktop in ML 10.8.2. The 'Change Desktop Background' using opt/click (right click) works after reboot, but fails to open (work correctly) thereafter. The 'System Preferences' icon bounces in the dock but not

  • Flex 4 - No Longer Supports ComboBox Prompt?

    I can't seem to find any documentation on the Flex 4 ComboBox's prompt? in Flex 3 there was a simple prompt property available at the -1 index - however I can't seem to find anything similiar in the Flex 4 / Spark Combobox?

  • Can't exit slideshow

    Hi I have 51,000 photos in Iphoto 09. When I click on an album and hit "slideshow" it will begin to display my photos but when I try click on a photo on the small thumbnail bar at the bottom it won't display that picture. The Slideshow will continue

  • Center and Left Justify Web Pages

    How can web pages be set up to center when the browser window is wider than the fixed width web page and left justify when the window is narrower than the web page? yahool.com is an example of this type of behaviour. I'm using CS4.