Error when sending message: 403 Forbidden....sender si file

hi...
here iam working with File to IDoc scenario
file is picking from a particular source but its is not showing any messages in SXMB_MONI and in IDX5 (outbound) or in RWB.
when i check test my message in RWB its is showing Error when sending message: 403 Forbidden.
can anyone explain me this problem plz...
all my DESIGN and CONFIGURATION is fine....
its urgent...
THX..
john wesly

Hi John
403 Forbidden
The server understood the request, but is refusing to fulfill it. Authorization will not help and the request SHOULD NOT be repeated. If the request method was not HEAD and the server wishes to make public why the request has not been fulfilled, it SHOULD describe the reason for the refusal in the entity. If the server does not wish to make this information available to the client, the status code 404 (Not Found) can be used instead.
for more details on error code follow the link
http://www.web-cache.com/Writings/http-status-codes.html
http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
http://www.helpwithpcs.com/courses/html/html_http_status_codes.htm
first try to solve problem by making CACHE refresh
either by directory
Check whether you have given the right credentials. If you are very sure that you have given right credentials then your problem will be solved by restarting J2EE engine
steps to restart J2EE engine
1) run transaction SMICM
2) then in the tab administration => J2EE instance(local) =>send soft shutdown with restart
by this java engine will restart and will be up in 5-10 minutes and your problem will be solved
Thanks
sandeep sharma
PS ; if helpful kindly reward points

Similar Messages

PI 7.1/RWB/Component/Monitoring/Adapter Engine/Test Message/403 Forbidden

Hello guys!
During performing PI 7.1 Readiness Check I have to perform a test message under Runtime Workbench\Adapter Engine\Test Message.
After processing i receive following error:
Error while sending message: 403 Forbidden.
Does anybody know the cause?
Many thanks in advance!
Jochen

Hi Sreeni!
Direct hit!
This was the problem! Missing role!
Many thanks to you!
Additional Information for all:
Readiness Check (PDF)
A compilaton of simple and advanced checks for Process Integration 7.1 (PI 7.1)
Page 44
SAP Note 817920 - XI Readiness Check 3.0/7.0, 7.1
Regards,
Jochen

Need to send a 403 (forbidden) message from proxy to client

I have create a List that contains URL's that I want to block from the user. Once I search that list and see that the requested URL is in the list, I need to send a 403(forbidden) message. Does anyone know if I can just send a "HTTP/1.0 403 Forbidden" Header back to the client in bytes from my DataOutputStream object??
Anyone have any other suggestions I would appreciate it.

You can get all you need from the HTTP 1.1 specification. i.e. http://www.w3.org/Protocols/rfc2616/rfc2616.txt

8Gb ram,466Gb hd useable, med2010, error message 403 forbidden when trying to download Maverick??

I can't download Maverick, get error message "403 forbidden"-mid 2010, 8Gb ram, 466Gb useable HD- what is the matter?

How are you trying to download Mavericks? From a Recovery HD system, drive, boot USB or from the Mac App Store once you are logged into the version of OS X that is presently installed on your Mac?

When I login to my bank, I get the message: 403 - Forbidden: Access is denied. You do not have permission to view this directory or page using the credentials that you supplied. Have new MacBook Air with Yosemite. How to solve this problem?

When I try to login to the website of my bank, I get the following error message:
403 - Forbidden: Access is denied.
You do not have permission to view this directory or page using the credentials that you supplied.
I have a new MacBook Air with OS Yosemite installed.
What is the problem and how can I solve it?

Some websites require a special client certficate for access. If you don't have that certficate, you'll have to contact the site operator to find out how to get one.
Sometimes the problem is caused by a web server that is configured to request an optional client certificate. Safari treats the request as mandatory. In that case, other browsers such as Firefox and Chrome may be able to connect to the site, because they ignore the request.
The first time you were prompted for a certificate, you may have clicked through a dialog that requested access to the Apple certificate in your keychain that is used to secure the iMessage service. In that case, you may be able to regain access to the site in Safari by doing as follows.
Back up all data.
Double-click anywhere in the line below on this page to select it:
com.apple.idms.appleid.prd
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Paste into the search field in the Keychain Access window by clicking in it and pressing the key combination command-V. An item may appear in the list of keychain items. The Name will begin with string you searched for, and the Kind will be "certificate."
Delete the item by selecting it and pressing the delete key. It will be recreated automatically the next time you launch the Messages or FaceTime application.
The next time you visit a site that prompts for an optional client certificate, cancel out of the prompt. You may have to do this several times before the server stops asking.
Credit for this idea to Christian Braukmueller of SAP.

Why am I getting this message: 403 - Forbidden: Access is denied. You do not have permission to view this directory or page using the credentials that you supplied?

I just tried to access a website that I regularly access several times a day. However, this evening I received the following message: 403 - Forbidden: Access is denied.
You do not have permission to view this directory or page using the credentials that you supplied.
I have never seen this before, and have no idea what it means, or how to access the site. Does it have anything to do with my security settings? Help. I belong to the site, and need to access it.

Do you need to login to access that website?
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

"Not an executable or is a link" errors when starting Messaging Server

"Not an executable or is a link" errors when starting Messaging Server
<P>
If Calendar Server 3.x has been installed to the same server root
as Messaging server, it is possible that the command 'NscpMail start'
to restart the server will return a string of errors:
# /etc/NscpMail start
19971207145610:Dispatch:Notification:Local Module
(Account-Handler) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Account-Manager) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(AutoReply-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Configuration-Manager) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Error-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Mailbox-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Program-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Router) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(UNIX-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(Finger-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(IMAP4-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(POP3-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(SMTP-Accept) is not an executable or is a link.
Module not loaded.
Startup Problem:
Module Error-Handler is required for proper operation.
Netscape Messaging Server Exiting!
The Calendar server 3.x installation may have changed the permissions
on [server-root]/bin directory from 755 to 750. Simply issue the
command (as root) 'chmod 755 [server-root]/bin' and then start
the server with the 'NscpMail start' command, and it should start
without a problem.

"Not an executable or is a link" errors when starting Messaging Server
<P>
If Calendar Server 3.x has been installed to the same server root
as Messaging server, it is possible that the command 'NscpMail start'
to restart the server will return a string of errors:
# /etc/NscpMail start
19971207145610:Dispatch:Notification:Local Module
(Account-Handler) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Account-Manager) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(AutoReply-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Configuration-Manager) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Error-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Mailbox-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Program-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Router) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(UNIX-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(Finger-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(IMAP4-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(POP3-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(SMTP-Accept) is not an executable or is a link.
Module not loaded.
Startup Problem:
Module Error-Handler is required for proper operation.
Netscape Messaging Server Exiting!
The Calendar server 3.x installation may have changed the permissions
on [server-root]/bin directory from 755 to 750. Simply issue the
command (as root) 'chmod 755 [server-root]/bin' and then start
the server with the 'NscpMail start' command, and it should start
without a problem.

Iphone 3G has stopped playing video entirely. (will not take play videos taken on the iphone no longer play), unable to transfer to computer either. Says Parameter error when I try to copy or play file

My Iphone 3G has stopped playing video entirely. (will not take play videos taken on the iphone), unable to transfer to computer either. Says Parameter error when I try to copy or play file. very frustrating, not being able to access past videos taken at all. This has been going on for a while now

Have you done any of the basic troublshooting steps described in the User Guide (Appendix B) - Restart, Reset, Restore?

TS3694 i have error when i install restore and update in file unknown occurred error 1015

i have error when i install restore and update in file unknown occurred error 1015

http://http://support.apple.com/kb/TS3694#error1015 this should help you with your problem.

AS2 sender adapter 403 forbidden error

Hi Experts,
I have a scenario which is connecting with third party using sender AS2 adapter.
while third party sending message to PI they are getting 403 forbidden error.
sender agreements are created one for MDN reports and another particular interface for the same sender party and receiver party.
certificates are installed properly and message subjects & AS2 ID also maintained correctly.
i am using pi7.11 version and seeburger AS2 adapter.
Please suggest any configuration or setting if missed which causes this issue.
Thanks in advance.

Hi Eng Swee,
Thanks for your reply
Please find the below sender agreements & corresponding CC
second one:
third one:
Fourth one
E is for the third party & M is our own party.
F,P,V,V are communication components
all these are working

Error while posting messages to SOAP sender adapter SP 13

Hi Friends,
I have configured a SOAP sender adapter in XI 3.0 and is using the URL
http://host:port/XISOAPAdapter/MessageServlet?channel=:BS_WEBSERVICE:CC_WEBSERVICE_SOAP to post the messages. When I open the URL in the browser I am getting the error.
Message Servlet is in Status ERROR
Status information:
Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/aii/30_VAL_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#5 $) bound to /MessageServlet
Classname ModuleProcessor: null
Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
Lookupname for remoteModuleProcessorLookupName: null
ModuleProcessorClass not instantiated
ModuleProcessorLocal not instantiated
ModuleProcessorRemote not instantiated
But when I test the URL http://host:port/XISOAPAdapter/HelperServlet?action=FindChannel&channel=:BS_WEBSERVICE:CC_WEBSERVICE_SOAP to check the communication channel I am getting the right response as below.
<?xml version="1.0" ?>
<http://host:port/XISOAPAdapter/HelperServlet?action=FindChannel&channel=:BS_EBTR_WEBSERVICE:CC_EBTR_WEBSERVICE_SOAP> <s:ChannelInfo xmlns:s="http://sap.com/xi/WebService/xi30">
<channelID>e7ac884596ea3d088cbfd8b434f942f2</channelID>
<name>CC_WEBSERVICE_SOAP</name>
<type xmlns:st="http://sap.com/xi/XI/System">st:SOAP</type>
<direction>INBOUND</direction>
<party />
<service>BS_WEBSERVICE</service>
</s:ChannelInfo
I used the http capture to debug, In the 1st case though I am getting "Message Servlet in status error" I am seeing a 200 OK code in the http capture tool. When the message is posted from .net client proxy we are getting a 500 internal server error.
Am not sure what causes the error ? I saw two notes in SDN related to SOAP - J2EE SP13. We are in SP13. Is this the issue ? Wanted to know your opinion before applying the notes.
Thanks & Regards,
Mathew

ABAP & Java stack was on different SP levels.

Random users getting very slow response when opening messages/attachments or sending email

I have a small number of users, mostly very senior management of course, who are experiencing slow response when trying to open email messages and attachments or send messages.
They see the spinning wheel and sit there until it decides to open or send. If the message is opened and closed again you would expect it to be quick reopening the same message, no, it does the same thing again.
These users are all using Outlook 2010 and their mail accounts are on Exchange 2013. It does not seem to make a difference if they use a physical machine or log into a VDI.
I do not have the same issue generally, though I have experienced this when using VDI and this has been seen using a number of different machine pools so it is not a specific pool.
This is not specifically a VDI issue, as the 3rd paragraph says, the issues are seen on both physical and virtual machines.
none of the mailboxes are particularly large, most are at around 60% of quota limit, and the same limit applies to almost all mailboxes across the organization. They also do not appear to have a huge number of messages stored, other users without issues
have larger mailboxes and higher item counts. Any ideas what I need to look at to address this?

Hi,
How about OWA?
If OWA works well, it seems an issue on the Outlook client side.
Please try to run Outlook under safe mode and re-create profile for testing.
Any related error/warning/information message left in App Log?
Also consider the network Bandwidth.
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

403 Error Transmitting the message to endpoint for XML file to XML file

Friends,
This is my 4th day learning XI and getting below issue.
I'm trying to follow the steps to transfer XML file to XML file scenario and when I drop the sender XML file, it seems the file has been picked-up but it does not generate the output file.
I checked in RWB for the message and found below error:
2008-01-04 13:09:48 Error Transmitting the message to endpoint http://sappc:8000/sap/xi/engine?type=entry using connection AFW failed, due to: Received HTTP response code 403
I tried to access http://sappc:8000/sap/xi/engine?type=entry from new browser window and I get the same error "403".
I'm able to access http://sappc:8000 fine.
I would appreciate help on this.
Thanks in advance.
Hetal

Sorry! you were correct I was looking at wrong file adapter. The message is error: (It gives 401 error during XICACHE update)
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="XICACHE">UPDATE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>HTTP status code401 Unauthorized</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>An error occurred when refreshing the XI runtime cache</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

SOAP Error when testing messages.

Hi Experts,
We are using webservices sync both sides. When we tested, I got this error:
<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
               <context>XIAdapter</context>
               <code>ModuleUnknownException</code>
               <text>com.sap.aii.af.mp.module.ModuleException: either no channelID specified or no channel found for the specified party, service, and channel name, MessageServlet(Version $Id: //tc/xi/NW04S_06_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#3 $)
     at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:380)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)</text>
            </s:SystemError>
Any input?
regards,
Narayanan

Hi experts,
our scenario, Webservice <-> XI <-> webservices (both in sync mode). We checked following message: another SOAP Sender adapter "com.sap.aii.af.mp.module.ModuleException" erro and hope we have all of it.
We face the same error. When checked test configuration, it worked fine but runtime, its giving the error.
Let me know if you need more details to suggest.
Regards.

Error when starting messaging service

I have a customer that is trying to send order confirmations and is having no luck. He has tried a outside SMTP server and the local pickup. I went to make sure the messaging service was started and when I tried to start it I got the following error
An unhandled exception (System.Formatexception) occured in NetPoint.Messagingservice.exe [4976]
Any ideas??
Karl

Here is the log.
<?xml version="1.0" encoding="utf-8" standalone="yes"?><synchlog>
<event>
    <messagetype>S</messagetype>
    <date>2008-12-11 13:03:20.56</date>
    <synchmodule>Log</synchmodule>
    <message>Log Started</message>
    <synchmethod>WriteXMLLog()</synchmethod>
    <objecttype>log</objecttype>
    <objectid>0</objectid>
</event>
<event>
<messagetype>I</messagetype>
<date>2008-12-11 13:03:20.56</date>
<synchmodule>Sender</synchmodule>
<message>Sending Campaigns is disabled.</message>
<synchmethod>SendCampaigns()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:03:20.58</date>
<synchmodule>Sender</synchmodule>
<message>Sending IM Reminders is disabled.</message>
<synchmethod>SendIMReminders()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>S</messagetype>
<date>2008-12-11 13:03:20.58</date>
<synchmodule>Sender</synchmodule>
<message>Finished SendAll</message>
<synchmethod>SendAll()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>S</messagetype>
<date>2008-12-11 13:08:20.58</date>
<synchmodule>Sender</synchmodule>
<message>Starting SendAll</message>
<synchmethod>SendAll()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:08:20.58</date>
<synchmodule>Sender</synchmodule>
<message>Starting support box scan.</message>
<synchmethod>ScanSupportBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>E</messagetype>
<date>2008-12-11 13:08:20.58</date>
<synchmodule>MailerBounces</synchmodule>
<message>ChilkatLog:
CopyMail:
    pop3-connect:
      User name is missing for POP connection
    Failed to get mail.
</message>
<synchmethod>Scan()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:08:20.58</date>
<synchmodule>Sender</synchmodule>
<message>Completed support box scan.</message>
<synchmethod>ScanSupportBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:08:20.58</date>
<synchmodule>Sender</synchmodule>
<message>Starting bounces box scan.</message>
<synchmethod>ScanBouncesBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>E</messagetype>
<date>2008-12-11 13:08:20.59</date>
<synchmodule>MailerBounces</synchmodule>
<message>ChilkatLog:
CopyMail:
    pop3-connect:
      Attempting to connect and log into POP3 server
      hostname: 192.168.0.73
      port: 110
      username: bounce
      -ERR Logon failure: unknown user name or bad password.
      Failed to login to POP3 server: login name and/or password is invalid
    Failed to get mail.
</message>
<synchmethod>Scan()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:08:20.59</date>
<synchmodule>Sender</synchmodule>
<message>Completed bounces box scan.</message>
<synchmethod>ScanBouncesBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:08:20.59</date>
<synchmodule>Sender</synchmodule>
<message>Starting users box scan.</message>
<synchmethod>ScanUsersBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:08:20.61</date>
<synchmodule>Sender</synchmodule>
<message>Completed users box scan.</message>
<synchmethod>ScanUsersBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:08:20.61</date>
<synchmodule>Sender</synchmodule>
<message>Starting delivery notices send.</message>
<synchmethod>SendDeliveryNotices()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:08:20.61</date>
<synchmodule>Sender</synchmodule>
<message>Completed delivery notices send.</message>
<synchmethod>SendDeliveryNotices()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:08:20.61</date>
<synchmodule>Sender</synchmodule>
<message>Starting Order Documents send.</message>
<synchmethod>SendOrderDocuments()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>E</messagetype>
<date>2008-12-11 13:08:50.66</date>
<synchmodule>Sender</synchmodule>
<message>Completed send of Order Documents with error:Exception has been thrown by the target of an invocation.</message>
<synchmethod>SendOrderDocuments()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:08:50.66</date>
<synchmodule>Sender</synchmodule>
<message>Sending Tickets is disabled.</message>
<synchmethod>SendTickets()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:08:50.66</date>
<synchmodule>Sender</synchmodule>
<message>Starting Queue send.</message>
<synchmethod>SendQueue()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:08:50.66</date>
<synchmodule>Sender</synchmodule>
<message>Completed Queue send.</message>
<synchmethod>SendQueue()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:08:50.66</date>
<synchmodule>Sender</synchmodule>
<message>Sending Campaigns is disabled.</message>
<synchmethod>SendCampaigns()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:08:50.66</date>
<synchmodule>Sender</synchmodule>
<message>Sending IM Reminders is disabled.</message>
<synchmethod>SendIMReminders()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>S</messagetype>
<date>2008-12-11 13:08:50.66</date>
<synchmodule>Sender</synchmodule>
<message>Finished SendAll</message>
<synchmethod>SendAll()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>S</messagetype>
<date>2008-12-11 13:13:50.67</date>
<synchmodule>Sender</synchmodule>
<message>Starting SendAll</message>
<synchmethod>SendAll()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:13:50.67</date>
<synchmodule>Sender</synchmodule>
<message>Starting support box scan.</message>
<synchmethod>ScanSupportBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>E</messagetype>
<date>2008-12-11 13:13:50.67</date>
<synchmodule>MailerBounces</synchmodule>
<message>ChilkatLog:
CopyMail:
    pop3-connect:
      User name is missing for POP connection
    Failed to get mail.
</message>
<synchmethod>Scan()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:13:50.67</date>
<synchmodule>Sender</synchmodule>
<message>Completed support box scan.</message>
<synchmethod>ScanSupportBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:13:50.67</date>
<synchmodule>Sender</synchmodule>
<message>Starting bounces box scan.</message>
<synchmethod>ScanBouncesBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>E</messagetype>
<date>2008-12-11 13:13:50.67</date>
<synchmodule>MailerBounces</synchmodule>
<message>ChilkatLog:
CopyMail:
    pop3-connect:
      Attempting to connect and log into POP3 server
      hostname: 192.168.0.73
      port: 110
      username: bounce
      -ERR Logon failure: unknown user name or bad password.
      Failed to login to POP3 server: login name and/or password is invalid
    Failed to get mail.
</message>
<synchmethod>Scan()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:13:50.67</date>
<synchmodule>Sender</synchmodule>
<message>Completed bounces box scan.</message>
<synchmethod>ScanBouncesBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:13:50.67</date>
<synchmodule>Sender</synchmodule>
<message>Starting users box scan.</message>
<synchmethod>ScanUsersBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:13:50.69</date>
<synchmodule>Sender</synchmodule>
<message>Completed users box scan.</message>
<synchmethod>ScanUsersBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:13:50.69</date>
<synchmodule>Sender</synchmodule>
<message>Starting delivery notices send.</message>
<synchmethod>SendDeliveryNotices()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:13:50.70</date>
<synchmodule>Sender</synchmodule>
<message>Completed delivery notices send.</message>
<synchmethod>SendDeliveryNotices()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:13:50.70</date>
<synchmodule>Sender</synchmodule>
<message>Starting Order Documents send.</message>
<synchmethod>SendOrderDocuments()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>E</messagetype>
<date>2008-12-11 13:14:20.73</date>
<synchmodule>Sender</synchmodule>
<message>Completed send of Order Documents with error:Exception has been thrown by the target of an invocation.</message>
<synchmethod>SendOrderDocuments()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:14:20.73</date>
<synchmodule>Sender</synchmodule>
<message>Sending Tickets is disabled.</message>
<synchmethod>SendTickets()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:14:20.73</date>
<synchmodule>Sender</synchmodule>
<message>Starting Queue send.</message>
<synchmethod>SendQueue()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:14:20.73</date>
<synchmodule>Sender</synchmodule>
<message>Completed Queue send.</message>
<synchmethod>SendQueue()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:14:20.73</date>
<synchmodule>Sender</synchmodule>
<message>Sending Campaigns is disabled.</message>
<synchmethod>SendCampaigns()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:14:20.73</date>
<synchmodule>Sender</synchmodule>
<message>Sending IM Reminders is disabled.</message>
<synchmethod>SendIMReminders()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>S</messagetype>
<date>2008-12-11 13:14:20.73</date>
<synchmodule>Sender</synchmodule>
<message>Finished SendAll</message>
<synchmethod>SendAll()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>S</messagetype>
<date>2008-12-11 13:19:20.73</date>
<synchmodule>Sender</synchmodule>
<message>Starting SendAll</message>
<synchmethod>SendAll()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:19:20.73</date>
<synchmodule>Sender</synchmodule>
<message>Starting support box scan.</message>
<synchmethod>ScanSupportBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>E</messagetype>
<date>2008-12-11 13:19:20.73</date>
<synchmodule>MailerBounces</synchmodule>
<message>ChilkatLog:
CopyMail:
    pop3-connect:
      User name is missing for POP connection
    Failed to get mail.
</message>
<synchmethod>Scan()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:19:20.73</date>
<synchmodule>Sender</synchmodule>
<message>Completed support box scan.</message>
<synchmethod>ScanSupportBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:19:20.73</date>
<synchmodule>Sender</synchmodule>
<message>Starting bounces box scan.</message>
<synchmethod>ScanBouncesBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>E</messagetype>
<date>2008-12-11 13:19:20.73</date>
<synchmodule>MailerBounces</synchmodule>
<message>ChilkatLog:
CopyMail:
    pop3-connect:
      Attempting to connect and log into POP3 server
      hostname: 192.168.0.73
      port: 110
      username: bounce
      -ERR Logon failure: unknown user name or bad password.
      Failed to login to POP3 server: login name and/or password is invalid
    Failed to get mail.
</message>
<synchmethod>Scan()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:19:20.73</date>
<synchmodule>Sender</synchmodule>
<message>Completed bounces box scan.</message>
<synchmethod>ScanBouncesBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:19:20.75</date>
<synchmodule>Sender</synchmodule>
<message>Starting users box scan.</message>
<synchmethod>ScanUsersBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:19:20.75</date>
<synchmodule>Sender</synchmodule>
<message>Completed users box scan.</message>
<synchmethod>ScanUsersBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:19:20.75</date>
<synchmodule>Sender</synchmodule>
<message>Starting delivery notices send.</message>
<synchmethod>SendDeliveryNotices()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:19:20.76</date>
<synchmodule>Sender</synchmodule>
<message>Completed delivery notices send.</message>
<synchmethod>SendDeliveryNotices()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:19:20.76</date>
<synchmodule>Sender</synchmodule>
<message>Starting Order Documents send.</message>
<synchmethod>SendOrderDocuments()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>E</messagetype>
<date>2008-12-11 13:19:50.81</date>
<synchmodule>Sender</synchmodule>
<message>Completed send of Order Documents with error:Exception has been thrown by the target of an invocation.</message>
<synchmethod>SendOrderDocuments()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:19:50.81</date>
<synchmodule>Sender</synchmodule>
<message>Sending Tickets is disabled.</message>
<synchmethod>SendTickets()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:19:50.81</date>
<synchmodule>Sender</synchmodule>
<message>Starting Queue send.</message>
<synchmethod>SendQueue()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:19:50.81</date>
<synchmodule>Sender</synchmodule>
<message>Completed Queue send.</message>
<synchmethod>SendQueue()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:19:50.81</date>
<synchmodule>Sender</synchmodule>
<message>Sending Campaigns is disabled.</message>
<synchmethod>SendCampaigns()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:19:50.81</date>
<synchmodule>Sender</synchmodule>
<message>Sending IM Reminders is disabled.</message>
<synchmethod>SendIMReminders()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>S</messagetype>
<date>2008-12-11 13:19:50.81</date>
<synchmodule>Sender</synchmodule>
<message>Finished SendAll</message>
<synchmethod>SendAll()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>S</messagetype>
<date>2008-12-11 13:24:50.81</date>
<synchmodule>Sender</synchmodule>
<message>Starting SendAll</message>
<synchmethod>SendAll()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:24:50.81</date>
<synchmodule>Sender</synchmodule>
<message>Starting support box scan.</message>
<synchmethod>ScanSupportBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>E</messagetype>
<date>2008-12-11 13:24:50.81</date>
<synchmodule>MailerBounces</synchmodule>
<message>ChilkatLog:
CopyMail:
    pop3-connect:
      User name is missing for POP connection
    Failed to get mail.
</message>
<synchmethod>Scan()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:24:50.81</date>
<synchmodule>Sender</synchmodule>
<message>Completed support box scan.</message>
<synchmethod>ScanSupportBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:24:50.81</date>
<synchmodule>Sender</synchmodule>
<message>Starting bounces box scan.</message>
<synchmethod>ScanBouncesBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>E</messagetype>
<date>2008-12-11 13:24:50.81</date>
<synchmodule>MailerBounces</synchmodule>
<message>ChilkatLog:
CopyMail:
    pop3-connect:
      Attempting to connect and log into POP3 server
      hostname: 192.168.0.73
      port: 110
      username: bounce
      -ERR Logon failure: unknown user name or bad password.
      Failed to login to POP3 server: login name and/or password is invalid
    Failed to get mail.
</message>
<synchmethod>Scan()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:24:50.81</date>
<synchmodule>Sender</synchmodule>
<message>Completed bounces box scan.</message>
<synchmethod>ScanBouncesBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:24:50.83</date>
<synchmodule>Sender</synchmodule>
<message>Starting users box scan.</message>
<synchmethod>ScanUsersBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:24:50.83</date>
<synchmodule>Sender</synchmodule>
<message>Completed users box scan.</message>
<synchmethod>ScanUsersBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:24:50.83</date>
<synchmodule>Sender</synchmodule>
<message>Starting delivery notices send.</message>
<synchmethod>SendDeliveryNotices()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:24:50.84</date>
<synchmodule>Sender</synchmodule>
<message>Completed delivery notices send.</message>
<synchmethod>SendDeliveryNotices()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:24:50.84</date>
<synchmodule>Sender</synchmodule>
<message>Starting Order Documents send.</message>
<synchmethod>SendOrderDocuments()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>E</messagetype>
<date>2008-12-11 13:25:20.92</date>
<synchmodule>Sender</synchmodule>
<message>Completed send of Order Documents with error:Exception has been thrown by the target of an invocation.</message>
<synchmethod>SendOrderDocuments()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:25:20.92</date>
<synchmodule>Sender</synchmodule>
<message>Sending Tickets is disabled.</message>
<synchmethod>SendTickets()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:25:20.92</date>
<synchmodule>Sender</synchmodule>
<message>Starting Queue send.</message>
<synchmethod>SendQueue()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:25:20.92</date>
<synchmodule>Sender</synchmodule>
<message>Completed Queue send.</message>
<synchmethod>SendQueue()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:25:20.92</date>
<synchmodule>Sender</synchmodule>
<message>Sending Campaigns is disabled.</message>
<synchmethod>SendCampaigns()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:25:20.92</date>
<synchmodule>Sender</synchmodule>
<message>Sending IM Reminders is disabled.</message>
<synchmethod>SendIMReminders()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>S</messagetype>
<date>2008-12-11 13:25:20.92</date>
<synchmodule>Sender</synchmodule>
<message>Finished SendAll</message>
<synchmethod>SendAll()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>S</messagetype>
<date>2008-12-11 13:30:20.94</date>
<synchmodule>Sender</synchmodule>
<message>Starting SendAll</message>
<synchmethod>SendAll()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:30:20.94</date>
<synchmodule>Sender</synchmodule>
<message>Starting support box scan.</message>
<synchmethod>ScanSupportBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>E</messagetype>
<date>2008-12-11 13:30:20.94</date>
<synchmodule>MailerBounces</synchmodule>
<message>ChilkatLog:
CopyMail:
    pop3-connect:
      User name is missing for POP connection
    Failed to get mail.
</message>
<synchmethod>Scan()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:30:20.94</date>
<synchmodule>Sender</synchmodule>
<message>Completed support box scan.</message>
<synchmethod>ScanSupportBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:30:20.94</date>
<synchmodule>Sender</synchmodule>
<message>Starting bounces box scan.</message>
<synchmethod>ScanBouncesBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>E</messagetype>
<date>2008-12-11 13:30:20.94</date>
<synchmodule>MailerBounces</synchmodule>
<message>ChilkatLog:
CopyMail:
    pop3-connect:
      Attempting to connect and log into POP3 server
      hostname: 192.168.0.73
      port: 110
      username: bounce
      -ERR Logon failure: unknown user name or bad password.
      Failed to login to POP3 server: login name and/or password is invalid
    Failed to get mail.
</message>
<synchmethod>Scan()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:30:20.94</date>
<synchmodule>Sender</synchmodule>
<message>Completed bounces box scan.</message>
<synchmethod>ScanBouncesBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:30:20.95</date>
<synchmodule>Sender</synchmodule>
<message>Starting users box scan.</message>
<synchmethod>ScanUsersBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:30:20.95</date>
<synchmodule>Sender</synchmodule>
<message>Completed users box scan.</message>
<synchmethod>ScanUsersBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:30:20.95</date>
<synchmodule>Sender</synchmodule>
<message>Starting delivery notices send.</message>
<synchmethod>SendDeliveryNotices()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:30:20.97</date>
<synchmodule>Sender</synchmodule>
<message>Completed delivery notices send.</message>
<synchmethod>SendDeliveryNotices()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:30:20.97</date>
<synchmodule>Sender</synchmodule>
<message>Starting Order Documents send.</message>
<synchmethod>SendOrderDocuments()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>E</messagetype>
<date>2008-12-11 13:30:51.01</date>
<synchmodule>Sender</synchmodule>
<message>Completed send of Order Documents with error:Exception has been thrown by the target of an invocation.</message>
<synchmethod>SendOrderDocuments()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:30:51.01</date>
<synchmodule>Sender</synchmodule>
<message>Sending Tickets is disabled.</message>
<synchmethod>SendTickets()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:30:51.01</date>
<synchmodule>Sender</synchmodule>
<message>Starting Queue send.</message>
<synchmethod>SendQueue()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:30:51.01</date>
<synchmodule>Sender</synchmodule>
<message>Completed Queue send.</message>
<synchmethod>SendQueue()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:30:51.01</date>
<synchmodule>Sender</synchmodule>
<message>Sending Campaigns is disabled.</message>
<synchmethod>SendCampaigns()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:30:51.01</date>
<synchmodule>Sender</synchmodule>
<message>Sending IM Reminders is disabled.</message>
<synchmethod>SendIMReminders()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>S</messagetype>
<date>2008-12-11 13:30:51.01</date>
<synchmodule>Sender</synchmodule>
<message>Finished SendAll</message>
<synchmethod>SendAll()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>S</messagetype>
<date>2008-12-11 13:35:51.01</date>
<synchmodule>Sender</synchmodule>
<message>Starting SendAll</message>
<synchmethod>SendAll()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:35:51.01</date>
<synchmodule>Sender</synchmodule>
<message>Starting support box scan.</message>
<synchmethod>ScanSupportBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>E</messagetype>
<date>2008-12-11 13:35:51.01</date>
<synchmodule>MailerBounces</synchmodule>
<message>ChilkatLog:
CopyMail:
    pop3-connect:
      User name is missing for POP connection
    Failed to get mail.
</message>
<synchmethod>Scan()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:35:51.01</date>
<synchmodule>Sender</synchmodule>
<message>Completed support box scan.</message>
<synchmethod>ScanSupportBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:35:51.01</date>
<synchmodule>Sender</synchmodule>
<message>Starting bounces box scan.</message>
<synchmethod>ScanBouncesBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>E</messagetype>
<date>2008-12-11 13:35:51.01</date>
<synchmodule>MailerBounces</synchmodule>
<message>ChilkatLog:
CopyMail:
    pop3-connect:
      Attempting to connect and log into POP3 server
      hostname: 192.168.0.73
      port: 110
      username: bounce
      -ERR Logon failure: unknown user name or bad password.
      Failed to login to POP3 server: login name and/or password is invalid
    Failed to get mail.
</message>
<synchmethod>Scan()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:35:51.01</date>
<synchmodule>Sender</synchmodule>
<message>Completed bounces box scan.</message>
<synchmethod>ScanBouncesBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:35:51.03</date>
<synchmodule>Sender</synchmodule>
<message>Starting users box scan.</message>
<synchmethod>ScanUsersBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:35:51.03</date>
<synchmodule>Sender</synchmodule>
<message>Completed users box scan.</message>
<synchmethod>ScanUsersBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:35:51.03</date>
<synchmodule>Sender</synchmodule>
<message>Starting delivery notices send.</message>
<synchmethod>SendDeliveryNotices()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:35:51.05</date>
<synchmodule>Sender</synchmodule>
<message>Completed delivery notices send.</message>
<synchmethod>SendDeliveryNotices()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:35:51.05</date>
<synchmodule>Sender</synchmodule>
<message>Starting Order Documents send.</message>
<synchmethod>SendOrderDocuments()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>E</messagetype>
<date>2008-12-11 13:36:21.22</date>
<synchmodule>Sender</synchmodule>
<message>Completed send of Order Documents with error:Exception has been thrown by the target of an invocation.</message>
<synchmethod>SendOrderDocuments()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:36:21.22</date>
<synchmodule>Sender</synchmodule>
<message>Sending Tickets is disabled.</message>
<synchmethod>SendTickets()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:36:21.22</date>
<synchmodule>Sender</synchmodule>
<message>Starting Queue send.</message>
<synchmethod>SendQueue()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:36:21.22</date>
<synchmodule>Sender</synchmodule>
<message>Completed Queue send.</message>
<synchmethod>SendQueue()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:36:21.22</date>
<synchmodule>Sender</synchmodule>
<message>Sending Campaigns is disabled.</message>
<synchmethod>SendCampaigns()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:36:21.22</date>
<synchmodule>Sender</synchmodule>
<message>Sending IM Reminders is disabled.</message>
<synchmethod>SendIMReminders()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>S</messagetype>
<date>2008-12-11 13:36:21.22</date>
<synchmodule>Sender</synchmodule>
<message>Finished SendAll</message>
<synchmethod>SendAll()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>S</messagetype>
<date>2008-12-11 13:41:21.22</date>
<synchmodule>Sender</synchmodule>
<message>Starting SendAll</message>
<synchmethod>SendAll()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:41:21.22</date>
<synchmodule>Sender</synchmodule>
<message>Starting support box scan.</message>
<synchmethod>ScanSupportBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>E</messagetype>
<date>2008-12-11 13:41:21.22</date>
<synchmodule>MailerBounces</synchmodule>
<message>ChilkatLog:
CopyMail:
    pop3-connect:
      User name is missing for POP connection
    Failed to get mail.
</message>
<synchmethod>Scan()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:41:21.22</date>
<synchmodule>Sender</synchmodule>
<message>Completed support box scan.</message>
<synchmethod>ScanSupportBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:41:21.22</date>
<synchmodule>Sender</synchmodule>
<message>Starting bounces box scan.</message>
<synchmethod>ScanBouncesBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>E</messagetype>
<date>2008-12-11 13:41:21.22</date>
<synchmodule>MailerBounces</synchmodule>
<message>ChilkatLog:
CopyMail:
    pop3-connect:
      Attempting to connect and log into POP3 server
      hostname: 192.168.0.73
      port: 110
      username: bounce
      -ERR Logon failure: unknown user name or bad password.
      Failed to login to POP3 server: login name and/or password is invalid
    Failed to get mail.
</message>
<synchmethod>Scan()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:41:21.22</date>
<synchmodule>Sender</synchmodule>
<message>Completed bounces box scan.</message>
<synchmethod>ScanBouncesBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:41:21.22</date>
<synchmodule>Sender</synchmodule>
<message>Starting users box scan.</message>
<synchmethod>ScanUsersBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:41:21.23</date>
<synchmodule>Sender</synchmodule>
<message>Completed users box scan.</message>
<synchmethod>ScanUsersBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:41:21.23</date>
<synchmodule>Sender</synchmodule>
<message>Starting delivery notices send.</message>
<synchmethod>SendDeliveryNotices()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:41:58.00</date>
<synchmodule>Sender</synchmodule>
<message>Completed delivery notices send.</message>
<synchmethod>SendDeliveryNotices()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:41:58.00</date>
<synchmodule>Sender</synchmodule>
<message>Starting Order Documents send.</message>
<synchmethod>SendOrderDocuments()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>E</messagetype>
<date>2008-12-11 13:42:28.06</date>
<synchmodule>Sender</synchmodule>
<message>Completed send of Order Documents with error:Exception has been thrown by the target of an invocation.</message>
<synchmethod>SendOrderDocuments()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:42:28.06</date>
<synchmodule>Sender</synchmodule>
<message>Sending Tickets is disabled.</message>
<synchmethod>SendTickets()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:42:28.06</date>
<synchmodule>Sender</synchmodule>
<message>Starting Queue send.</message>
<synchmethod>SendQueue()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:42:28.06</date>
<synchmodule>Sender</synchmodule>
<message>Completed Queue send.</message>
<synchmethod>SendQueue()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:42:28.06</date>
<synchmodule>Sender</synchmodule>
<message>Sending Campaigns is disabled.</message>
<synchmethod>SendCampaigns()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:42:28.06</date>
<synchmodule>Sender</synchmodule>
<message>Sending IM Reminders is disabled.</message>
<synchmethod>SendIMReminders()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>S</messagetype>
<date>2008-12-11 13:42:28.06</date>
<synchmodule>Sender</synchmodule>
<message>Finished SendAll</message>
<synchmethod>SendAll()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>S</messagetype>
<date>2008-12-11 13:47:28.06</date>
<synchmodule>Sender</synchmodule>
<message>Starting SendAll</message>
<synchmethod>SendAll()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:47:28.06</date>
<synchmodule>Sender</synchmodule>
<message>Starting support box scan.</message>
<synchmethod>ScanSupportBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>E</messagetype>
<date>2008-12-11 13:47:28.06</date>
<synchmodule>MailerBounces</synchmodule>
<message>ChilkatLog:
CopyMail:
    pop3-connect:
      User name is missing for POP connection
    Failed to get mail.
</message>
<synchmethod>Scan()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:47:28.06</date>
<synchmodule>Sender</synchmodule>
<message>Completed support box scan.</message>
<synchmethod>ScanSupportBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:47:28.06</date>
<synchmodule>Sender</synchmodule>
<message>Starting bounces box scan.</message>
<synchmethod>ScanBouncesBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>E</messagetype>
<date>2008-12-11 13:47:28.06</date>
<synchmodule>MailerBounces</synchmodule>
<message>ChilkatLog:
CopyMail:
    pop3-connect:
      Attempting to connect and log into POP3 server
      hostname: 192.168.0.73
      port: 110
      username: bounce
      -ERR Logon failure: unknown user name or bad password.
      Failed to login to POP3 server: login name and/or password is invalid
    Failed to get mail.
</message>
<synchmethod>Scan()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:47:28.06</date>
<synchmodule>Sender</synchmodule>
<message>Completed bounces box scan.</message>
<synchmethod>ScanBouncesBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:47:28.08</date>
<synchmodule>Sender</synchmodule>
<message>Starting users box scan.</message>
<synchmethod>ScanUsersBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:47:28.08</date>
<synchmodule>Sender</synchmodule>
<message>Completed users box scan.</message>
<synchmethod>ScanUsersBox()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:47:28.08</date>
<synchmodule>Sender</synchmodule>
<message>Starting delivery notices send.</message>
<synchmethod>SendDeliveryNotices()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:47:36.48</date>
<synchmodule>Sender</synchmodule>
<message>Completed delivery notices send.</message>
<synchmethod>SendDeliveryNotices()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:47:36.48</date>
<synchmodule>Sender</synchmodule>
<message>Starting Order Documents send.</message>
<synchmethod>SendOrderDocuments()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>E</messagetype>
<date>2008-12-11 13:48:06.53</date>
<synchmodule>Sender</synchmodule>
<message>Completed send of Order Documents with error:Exception has been thrown by the target of an invocation.</message>
<synchmethod>SendOrderDocuments()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:48:06.53</date>
<synchmodule>Sender</synchmodule>
<message>Sending Tickets is disabled.</message>
<synchmethod>SendTickets()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:48:06.53</date>
<synchmodule>Sender</synchmodule>
<message>Starting Queue send.</message>
<synchmethod>SendQueue()</synchmethod>
<objecttype />
<objectid />
</event><event>
<messagetype>I</messagetype>
<date>2008-12-11 13:48:06.53</date>
<synchmodu

Error when sending message: 403 Forbidden....sender si file

Similar Messages

Maybe you are looking for