Error when starting a converted VM (from vmware server edition)

Hi, i am trying to start a converted VM from VMWARE SERVER. I think i have followed steps to import an VMWARE machine (using resources >> virtual machines images) and it does not return errors when converting VM but then, when trying to start it, it returns
failed:<OVSException: no server selected to run vm('/OVS/running_pool/SIR_xxx') memory=512> StackTrace: File "/opt/ovs-agent-2.2/OVSSiteVM.py", line 77, in start_vm raise e
I have also checked that there is enough memory.
This is the contect for vm.cfg
acpi = 1
apic = 1
builder = 'hvm'
device_model = '/usr/lib/xen/bin/qemu-dm'
disk = ['file:/OVS/running_pool/SIR_xxx/SIR_xxx.img,hda,w',
'file:/OVS/running_pool/SIR_consulnor/SIR_xxx (2).img,hdb,w',
',hdc:cdrom,r',
kernel = '/usr/lib/xen/boot/hvmloader'
memory = '512'
name = 'SIR_xxx'
on_crash = 'restart'
on_reboot = 'restart'
pae = 1
serial = 'pty'
timer_mode = '1'
uuid = 'e23767cc-dc3d-0255-a7ac-65f111b589d7'
vcpus = 1
vif = ['bridge=xenbr0,mac=00:16:3E:71:AF:B1,type=ioemu']
vif_other_config = []
vnc = 1
vncconsole = 1
vnclisten = '0.0.0.0'
vncpasswd = 'xxx'
vncunused = 1
Thanks for your help

user559432 wrote:
failed:<OVSException: no server selected to run vm('/OVS/running_pool/SIR_xxx') memory=512> StackTrace: File "/opt/ovs-agent-2.2/OVSSiteVM.py", line 77, in start_vm raise eDo your servers have Hardware/Full Virtualization enabled? You can check on the console and ensure the console says that Hardware Virtualization is enabled. If not, check in your BIOS that the processor hardware virtualization is enabled. If you don't have an option, your PC may not have the Intel VT-x or AMD-v extensions required to support hardware virtualization.
You can check to see if your processor supports this extension by using:
Intel processor:
# cat /proc/cpuinfo | grep vmxAMD processor:
# cat /proc/cpuinfo | grep svmIf you see a result, it means the processor has that support. You still need to ensure that it is enabled in the BIOS.

Similar Messages

  • Error when loading a flat file from Application server.

    Hi,
    I am trying to load a flatfile from the application server, and I am getting the message
    Error while accessing the application server file
    Message no. RSDS_ACCESS002
    I checked for notes and found only one:
    Note 1033978 - Correction: Loading Unicode files from application server
    but we have 19 SP level, and the note says it needs 13 SP level, so I think it would not be of any help.
    does anybodie know what to do??
    thanks for the help.
    Mauricio

    Error in accessing while application server file..
    when i am trying load the data to psa
    when i am taking the file name: text-type file from app server
    plz reslove me for this problem??
    another question
    when i am saving the file with using * in the  filename in .CSV file its not saving,
    whats the reason????
    ASHOK

  • Error when calling a XI-webservice from SQL-Server 2005

    Hi all,
    we have published a webservice with XI 7.0 (using the SOAP-Adapter) and try to call it from a stored procedure within SQL-Server 2005. Upon execution we receive the error
    "<SAP:Code area="MESSAGE">EMPTY_HTTP_REQUEST_RECEIVED</SAP:Code>" and
    "<SAP:Stack>Empty HTTP query received; message processing not possible  </SAP:Stack>".
    We are using the dll MSXML2.ServerXMLHTTP. The webservice is available and can be reached from other tools like SOAP-UI when using the same endpoint-URL. It is also possible to call the service from Visual-Basic using the same code.
    Does anyone has any clue about what's causing this error?
    Thanks in advance!

    It is clear that, PI service is working absolutely fine and the problem is calling it in your SP. I do not think you are calling a web service but actually sending a HTTP request to the server. An HTTP request and a SOAP call are different in terms of protocol. You would need to explore more on how to call web services from SQL SPs.. and the right place to search would be MS SQL Server Forums..!!
    VJ

  • Olympia error when starting Agent

    I am having this error when starting the agent on the new
    enterprise edition:
    lsnrctl dbsnmp_startLSNRCTL for Linux: Version 8.0.5.0.0 - Production on 13-MAR-99
    11:27:39
    (c) Copyright 1997 Oracle Corporation. All rights reserved.
    DBSNMP Discovery Error: couldn't read file
    "./oracle_olympia.tcl": no such file or directory
    The agent does start (as dbsnmp_status reports running). However,
    this error bothers me and I dont know what the impact is.
    Any idea?
    Thanks,
    Calixto.
    null

    S C Maturi (guest) wrote:
    : Calixto Melean (guest) wrote:
    : : I am having this error when starting the agent on the new
    : : enterprise edition:
    : : >lsnrctl dbsnmp_start
    : : LSNRCTL for Linux: Version 8.0.5.0.0 - Production on
    13-MAR-99
    : : 11:27:39
    : : (c) Copyright 1997 Oracle Corporation. All rights reserved.
    : : DBSNMP Discovery Error: couldn't read file
    : : "./oracle_olympia.tcl": no such file or directory
    : : The agent does start (as dbsnmp_status reports running).
    : However,
    : : this error bothers me and I dont know what the impact is.
    : : Any idea?
    : : Thanks,
    : : Calixto.
    : Calixto,
    : This file got into the distribution by mistake, ignore the
    : message.
    : Maturi
    I am getting the same olympia error message but my agent does not
    get started either. I am using Redhat 5.2 and 8.0.5.1EE of Oracle
    on Linux. Anything that I might be missing? Thanks ..
    Shub
    null

  • Error when trying to convert excel files to pdf

    I'm getting the following error when trying to convert .xls and .xlsx files to pdf, using the "Create PDF" option:
    Error message from the primary converter:
    ALC-PDG-010-012-PDFMaker reported an error while printing the document.
    Word, Powerpoint and Text files convert without any issues. Also I'm able to opent the excel files and convert them to pdf using the acrobat option in excel.
    Livecycle Version: 10.0.2, GM
    MS Office Version: 2007
    Any help would be appreciated. Thanks in advance.
    Regards,
    Suhail N.

    It is always difficult when you need to convert multiple xls files to pdf or multiple sheets to pdf. If you have a single file to convert then the best method would be to copy your data to doc file and then convert it into PDF . If you have multiple files to convert then it is really difficult to convert all the files manually. Then the better method would be to use converter tool to convert excel to pdf . By doing this you can convert many files in just few seconds.

  • MissingResourceException Error when Starting Application

    I am getting the following error when starting an Enterprise application in weblogic 10.3.6:
    .MissingResourceException: Can't find bundle for base name resources.Messages, locale en
    A snippet from my faces-config.xml file:
         <application>
         <locale-config>
              <default-locale>en_US</default-locale>
    <supported-locale>ko_KR</supported-locale>
         </locale-config>     
              <message-bundle>resources.application</message-bundle>
    <message-bundle>resources.Messages</message-bundle>
              <resource-bundle>
              <base-name>resources.Messages</base-name>
              <var>msgs</var>
              </resource-bundle>
              <resource-bundle>
              <base-name>resources.ErrorMessages</base-name>
              <var>errorMsgs</var>
              </resource-bundle>     
              <resource-bundle>
              <base-name>resources.Labels</base-name>
              <var>labels</var>
              </resource-bundle>     
         </application>
    I have an Enterprise Application (.ear file) that contains one WAR file. The War file includes resources in the following structure:
    .war
    WEB-INF
    classes
    resources
    Messages_en_US.properties
    Messages_ko_KR.properties
    How can I correct this error?

    I successfully installed SAP NetWeaver 7.01 ABAP Trial Version on Vista home edition.  I was able to start the application server by following the steps outlined by Marcelo Ramos at the following link:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0c0bdf1-3440-2b10-db8a-ae16f614745d
    I hope this helps someone else as well.
    Barbara

  • Commons-logging error when starting Flex2 in JRun

    Created new JRun Server and deployed Flex2 to this server.
    Receiving this error when starting up this server instance.
    Starting Macromedia JRun 4.0 (Build 92909), logicerm2 server
    07/13 22:23:28 info JRun Naming Service listening on *:2911
    07/13 22:23:28 warning No sessionSecret has been specified in
    jrun.xml. Installi
    ng a self generated sessionSecret.
    07/13 22:23:28 info No JDBC data sources have been configured
    for this server (s
    ee jrun-resources.xml)
    07/13 22:23:28 info JRun Web Server listening on *:8102
    07/13 22:23:28 info Deploying enterprise application
    "default-ear" from: file:/C
    :/JRun4/servers/logicerm2/default-ear/
    07/13 22:23:28 info Deploying web application "JRun Default
    Web Application" fro
    m: file:/C:/JRun4/servers/logicerm2/default-ear/
    07/13 22:23:29 info Web Services in default-ear#default-war:
    07/13 22:23:29 info AdminService
    07/13 22:23:29 warning default-war web application has
    'reload' as true in jrun-
    web.xml. Consider setting it false if the application is
    running in production e
    nvironment.
    07/13 22:23:29 warning default-war web application has
    'compile' as true in jrun
    -web.xml. Consider setting it false if the application is
    running in production
    environment.
    07/13 22:23:29 user JSPServlet: init
    07/13 22:23:29 info Deploying web application "Flex Data
    Services" from: file:/C
    :/JRun4/servers/logicerm2/flex/
    07/13 22:23:29 user JSPServlet: init
    07/13 22:23:29 user FlexMxmlServlet: init
    07/13 22:23:29 INFO Loading configuration file
    C:\JRun4\servers\logicerm2\flex\W
    EB-INF\flex\flex-webtier-config.xml
    07/13 22:23:30 INFO Loading configuration file
    C:\JRun4\servers\logicerm2\flex\W
    EB-INF\flex\flex-config.xml
    07/13 22:23:30 user FlexMxmlServlet: Starting Adobe Flex Web
    Tier Compiler
    07/13 22:23:30 user FlexMxmlServlet: Adobe Flex Web Tier
    Compiler Build: 143451
    07/13 22:23:30 user MessageBrokerServlet: init
    07/13 22:23:31 user FlexSwfServlet: init
    07/13 22:23:31 user FlexInternalServlet: init
    07/13 22:23:31 info Deploying web application "Flex Admin Web
    Application" from:
    file:/C:/JRun4/servers/logicerm2/flex-admin/
    07/13 22:23:31 user JSPServlet: init
    07/13 22:23:31 user MessageBrokerServlet: init
    07/13 22:23:31 info Deploying web application "Flex Data
    Services Samples" from:
    file:/C:/JRun4/servers/logicerm2/samples/
    07/13 22:23:31 user JSPServlet: init
    07/13 22:23:31 user FlexMxmlServlet: init
    07/13 22:23:32 INFO Loading configuration file
    C:\JRun4\servers\logicerm2\sample
    s\WEB-INF\flex\flex-webtier-config.xml
    07/13 22:23:32 INFO Loading configuration file
    C:\JRun4\servers\logicerm2\sample
    s\WEB-INF\flex\flex-config.xml
    07/13 22:23:32 user FlexMxmlServlet: Starting Adobe Flex Web
    Tier Compiler
    07/13 22:23:32 user FlexMxmlServlet: Adobe Flex Web Tier
    Compiler Build: 143451
    07/13 22:23:32 user MessageBrokerServlet: init
    07/13 22:23:32 error Could not pre-load servlet:
    MessageBrokerServlet
    [1]org.apache.commons.logging.LogConfigurationException:
    org.apache.commons.logg
    ing.LogConfigurationException:
    org.apache.commons.logging.LogConfigurationExcept
    ion: Invalid class loader hierarchy. You have more than one
    version of 'org.apa
    che.commons.logging.Log' visible, which is not allowed.
    (Caused by org.apache.co
    mmons.logging.LogConfigurationException: Invalid class loader
    hierarchy. You ha
    ve more than one version of 'org.apache.commons.logging.Log'
    visible, which is n
    ot allowed.) (Caused by
    org.apache.commons.logging.LogConfigurationException: or
    g.apache.commons.logging.LogConfigurationException: Invalid
    class loader hierarc
    hy. You have more than one version of
    'org.apache.commons.logging.Log' visible,
    which is not allowed. (Caused by
    org.apache.commons.logging.LogConfigurationExc
    eption: Invalid class loader hierarchy. You have more than
    one version of 'org.
    apache.commons.logging.Log' visible, which is not allowed.))
    at
    org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactory
    Impl.java:543)
    at
    org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactory
    Impl.java:235)
    at
    org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactory
    Impl.java:209)
    at
    org.apache.commons.logging.LogFactory.getLog(LogFactory.java:351)
    at
    org.apache.commons.httpclient.params.DefaultHttpParams.<clinit>(Defau
    ltHttpParams.java:53)
    at
    flex.messaging.services.http.HTTPProxyAdapter.<init>(HTTPProxyAdapter
    .java:111)
    at
    sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native
    Method)
    at
    sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown
    Source)
    at
    sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown
    Sou
    rce)
    at java.lang.reflect.Constructor.newInstance(Unknown Source)
    at java.lang.Class.newInstance0(Unknown Source)
    at java.lang.Class.newInstance(Unknown Source)
    at
    flex.messaging.util.ClassUtil.createDefaultInstance(ClassUtil.java:71
    at
    flex.messaging.Destination.createAdapter(Destination.java:277)
    at
    flex.messaging.Destination.initDestination(Destination.java:103)
    at
    flex.messaging.services.HTTPProxyService.createDestination(HTTPProxyS
    ervice.java:78)
    at
    flex.messaging.services.AbstractService.createDestinations(AbstractSe
    rvice.java:82)
    at
    flex.messaging.config.MessagingConfiguration.createServices(Messaging
    Configuration.java:187)
    at
    flex.messaging.config.MessagingConfiguration.configureBroker(Messagin
    gConfiguration.java:84)
    at
    flex.messaging.MessageBrokerServlet.init(MessageBrokerServlet.java:10
    5)
    at
    jrun.servlet.WebApplicationService.loadServlet(WebApplicationService.
    java:1242)
    at
    jrun.servlet.WebApplicationService.preloadServlets(WebApplicationServ
    ice.java:789)
    at
    jrun.servlet.WebApplicationService.postStart(WebApplicationService.ja
    va:291)
    at
    jrun.deployment.DeployerService.initModules(DeployerService.java:711)
    at
    jrun.deployment.DeployerService.createWatchedDeployment(DeployerServi
    ce.java:242)
    at
    jrun.deployment.DeployerService.deploy(DeployerService.java:430)
    at
    jrun.deployment.DeployerService.checkWatchedDirectories(DeployerServi
    ce.java:179)
    at
    jrun.deployment.DeployerService.run(DeployerService.java:891)
    at
    jrunx.scheduler.SchedulerService.invokeRunnable(SchedulerService.java
    :223)
    at
    jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.j
    ava:426)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
    Caused by:
    org.apache.commons.logging.LogConfigurationException:
    org.apache.comm
    ons.logging.LogConfigurationException: Invalid class loader
    hierarchy. You have
    more than one version of 'org.apache.commons.logging.Log'
    visible, which is not
    allowed. (Caused by
    org.apache.commons.logging.LogConfigurationException: Inval
    id class loader hierarchy. You have more than one version of
    'org.apache.common
    s.logging.Log' visible, which is not allowed.)
    at
    org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogF
    actoryImpl.java:397)
    at
    org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactory
    Impl.java:529)
    ... 30 more
    Caused by:
    org.apache.commons.logging.LogConfigurationException: Invalid class
    l
    oader hierarchy. You have more than one version of
    'org.apache.commons.logging.
    Log' visible, which is not allowed.
    at
    org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogF
    actoryImpl.java:385)
    ... 31 more
    [0]flex.messaging.config.ConfigurationException: Unable to
    create service 'flex.
    messaging.services.HTTPProxyService' for 'proxy-service' due
    to the following er
    ror: org.apache.commons.logging.LogConfigurationException:
    org.apache.commons.lo
    gging.LogConfigurationException: Invalid class loader
    hierarchy. You have more
    than one version of 'org.apache.commons.logging.Log' visible,
    which is not allow
    ed. (Caused by
    org.apache.commons.logging.LogConfigurationException: Invalid cla
    ss loader hierarchy. You have more than one version of
    'org.apache.commons.logg
    ing.Log' visible, which is not allowed.) (Caused by
    org.apache.commons.logging.L
    ogConfigurationException:
    org.apache.commons.logging.LogConfigurationException:
    Invalid class loader hierarchy. You have more than one
    version of 'org.apache.c
    ommons.logging.Log' visible, which is not allowed. (Caused by
    org.apache.commons
    .logging.LogConfigurationException: Invalid class loader
    hierarchy. You have mo
    re than one version of 'org.apache.commons.logging.Log'
    visible, which is not al
    lowed.)).
    at
    flex.messaging.config.MessagingConfiguration.createServices(Messaging
    Configuration.java:202)
    at
    flex.messaging.config.MessagingConfiguration.configureBroker(Messagin
    gConfiguration.java:84)
    at
    flex.messaging.MessageBrokerServlet.init(MessageBrokerServlet.java:10
    5)
    at
    jrun.servlet.WebApplicationService.loadServlet(WebApplicationService.
    java:1242)
    at
    jrun.servlet.WebApplicationService.preloadServlets(WebApplicationServ
    ice.java:789)
    at
    jrun.servlet.WebApplicationService.postStart(WebApplicationService.ja
    va:291)
    at
    jrun.deployment.DeployerService.initModules(DeployerService.java:711)
    at
    jrun.deployment.DeployerService.createWatchedDeployment(DeployerServi
    ce.java:242)
    at
    jrun.deployment.DeployerService.deploy(DeployerService.java:430)
    at
    jrun.deployment.DeployerService.checkWatchedDirectories(DeployerServi
    ce.java:179)
    at
    jrun.deployment.DeployerService.run(DeployerService.java:891)
    at jrunx.scheduler.SchedulerS07/13 22:23:33 user
    FlexSwfServlet: init
    ervice.invokeRunnable(SchedulerService.java:223)
    at
    jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.j
    ava:426)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
    PLEASE Help!!!
    Bernie

    Figured this one out:
    Searched thru instance of JRun that flex was installed in and
    removed all the additional commons-logging jar files I
    found.

  • Multiple condition : Error when starting a SWITCH branch

    Hi,
    In our Z Leave Workflow,I am facing the errors listed below.
    Error when starting a SWITCH branch
    Error during CASE evaluation in SWITCH mode for node 0000000158
    Operator 'EQ': The value of the left operand cannot be determined
    Error in the evaluation of expression '<???>&REQ.STATUS&' for item '1'
    Unable to determine the value of component ''
    It gives error in Multiple condition Request Approved? which is similar to standard WF12300111 node number 158 (u can say copy of WF12300111
    This multiple condition works in some scenario But it gives dump at other scenario .
    I have checked the value of REQ.STATUS in runtime. It populates the value as 'POSTED' in runtime,
    Please suggest if any solution on this.
    Regards,
    Kalpesh

    Hi There was some problem with task which was comprising class CL_PT_REQ_WF_ATTRIBS and APPROVE method. This method is to change the status of particular leave workitem.After running this particular task ,the status was not changin instantly.This method locks particular workitem and was releasing the workitem once the WF gets completed.Hence I was getting REQ.STATUS as sent.
    I have changed that task with following code in new task...
    DATA:
          REQUEST_ID TYPE PTARQ_DEDUCTION-REQUEST_ID,
    request      TYPE REF TO if_pt_req_request,
        new_status   TYPE tim_req_status.
      SWC_GET_ELEMENT CONTAINER 'REQUEST_ID' REQUEST_ID.
    CALL FUNCTION 'ENQUEUE_EPTREQ'
        EXPORTING
          mode_ptreq_header = 'E'
          request_id        = request_id
        EXCEPTIONS
          foreign_lock      = 1
          system_failure    = 2
          OTHERS            = 3.
      IF sy-subrc <> 0.
        MESSAGE w058(hrtim_abs_req) WITH request_id.
      ELSE.
    CALL METHOD ca_pt_req_header=>agent->get_request
          EXPORTING
            im_request_id = request_id
          IMPORTING
            ex_request    = request.
    execute state transition
        CALL METHOD request->initiate_state_transition
          EXPORTING
            im_transfer_event = 'APPROVE'
          IMPORTING
            ex_new_status     = new_status.
    COMMIT WORK.
        CALL FUNCTION 'DEQUEUE_EPTREQ'
          EXPORTING
            request_id = request_id.
    ENDIF.
    This will create new status for leave item during WF processing.
    Apart from that also added Wait for  2 minutes after that task....
    Thanks for your help.
    Regards,
    Kalpesh

  • "Not an executable or is a link" errors when starting Messaging Server

    "Not an executable or is a link" errors when starting Messaging Server
    <P>
    If Calendar Server 3.x has been installed to the same server root
    as Messaging server, it is possible that the command 'NscpMail start'
    to restart the server will return a string of errors:
    # /etc/NscpMail start
    19971207145610:Dispatch:Notification:Local Module
    (Account-Handler) is not a n executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Account-Manager) is not a n executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (AutoReply-Handler) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Configuration-Manager) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Error-Handler) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Mailbox-Deliver) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Program-Deliver) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (SMTP-Deliver) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (SMTP-Router) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (UNIX-Deliver) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Network Module
    (Finger-Server) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Network Module
    (IMAP4-Server) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Network Module
    (POP3-Server) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Network Module
    (SMTP-Accept) is not an executable or is a link.
    Module not loaded.
    Startup Problem:
    Module Error-Handler is required for proper operation.
    Netscape Messaging Server Exiting!
    The Calendar server 3.x installation may have changed the permissions
    on [server-root]/bin directory from 755 to 750. Simply issue the
    command (as root) 'chmod 755 [server-root]/bin' and then start
    the server with the 'NscpMail start' command, and it should start
    without a problem.

    "Not an executable or is a link" errors when starting Messaging Server
    <P>
    If Calendar Server 3.x has been installed to the same server root
    as Messaging server, it is possible that the command 'NscpMail start'
    to restart the server will return a string of errors:
    # /etc/NscpMail start
    19971207145610:Dispatch:Notification:Local Module
    (Account-Handler) is not a n executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Account-Manager) is not a n executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (AutoReply-Handler) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Configuration-Manager) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Error-Handler) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Mailbox-Deliver) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Program-Deliver) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (SMTP-Deliver) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (SMTP-Router) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (UNIX-Deliver) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Network Module
    (Finger-Server) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Network Module
    (IMAP4-Server) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Network Module
    (POP3-Server) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Network Module
    (SMTP-Accept) is not an executable or is a link.
    Module not loaded.
    Startup Problem:
    Module Error-Handler is required for proper operation.
    Netscape Messaging Server Exiting!
    The Calendar server 3.x installation may have changed the permissions
    on [server-root]/bin directory from 755 to 750. Simply issue the
    command (as root) 'chmod 755 [server-root]/bin' and then start
    the server with the 'NscpMail start' command, and it should start
    without a problem.

  • Problems converting PDF to MS Word document.  I successfuly converted 4 files and now subsequent files generate a "conversion failure" error when attempting to convert the file.  I have a large manuscript and I separated each chapter to assist with the co

    Problems converting PDF to MS Word document.  I successfully converted 4 files and now subsequent files generate a "conversion failure" error when attempting to convert the file.  I have a large manuscript and I separated each chapter to assist with the conversion; like I said, first 4 parts no problem, then conversion failure.  I attempted to convert the entire document and same result.  I specifically purchased the export to Word feature.  Please assist.  I initially had to export the Word Perfect document into PDF and attempting to go from PDF to MS Word.

    Hi sdr2014,
    I'm sorry to hear your conversion process has stalled. It sounds as though the problem isn't specific to one file, as you've been unable to convert anything since the first four chapters converted successfully.
    So, let's try this:
    If you're converting via the ExportPDF website, please log out, clear the browser cache, and then log back in. If you're using Reader, please choose Help > Check for Updates to make sure that you have the most current version installed.
    Please let us know how it goes.
    Best,
    Sara

  • Errors when starting tomcat5.5

    Errors when starting tomcat5.5
    I found below errors message when starting tomcat5.5 every time, does anyone know what cause it?
    Thanks in advance.
    JDK 1.5.0 & Struts 1.2 were installed on my machine, running on win XP home edition.
    validation.xml file is here:
    <?xml version="1.0" encoding="iso-8859-1"?>
    <!DOCTYPE form-validation PUBLIC
              "-//Apache Software Foundation//DTD Commons Validator Rules Configuration 1.1.3//EN"
              "http://jakarta.apache.org/commons/dtds/validator_1_1_3.dtd">
    <form-validation>
         <formset>            
              <form name="loginFormBean">
                     <field property="userId" depends="required">
                       <msg name="required" key="loginFormBean.error.userId.missing"/>     
                     </field> 
                     <field property="password" depends="required">
                       <msg name="required" key="loginFormBean.error.password.missing"/>     
                     </field> 
              </form>       
         </formset>  
    </form-validation>
    Error message:
    INFO: Loading validation rules file from '/WEB-INF/validation.xml'
    Nov 18, 2005 9:26:37 AM org.apache.commons.digester.Digester error
    SEVERE: Parse Error at line 39 column 17: Document is invalid: no grammar found.
    org.xml.sax.SAXParseException: Document is invalid: no grammar found.
         at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(
    ErrorHandlerWrapper.java:236)
         at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error(ErrorHandlerWrapper.
    java:172)
         at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.
    java:382)
         at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.
    java:316)
         at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.scanStartElement(
    XMLNSDocumentScannerImpl.java:177)
         at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl$NSContentDispatcher.
    scanRootElementHook(XMLNSDocumentScannerImpl.java:779)
         at com.sun.org.apache.xerces.internal.impl.
    XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(XMLDocumentFragmentScannerImpl.
    java:1794)
         at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(
    XMLDocumentFragmentScannerImpl.java:368)
         at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.
    java:834)
         at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.
    java:764)
         at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:148)
         at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java
    :1242)
         at org.apache.commons.digester.Digester.parse(Digester.java:1591)
         at org.apache.commons.validator.ValidatorResources.<init>(ValidatorResources.java:159)
         at org.apache.struts.validator.ValidatorPlugIn.initResources(ValidatorPlugIn.java:237)
         at org.apache.struts.validator.ValidatorPlugIn.init(ValidatorPlugIn.java:162)
         at org.apache.struts.action.ActionServlet.initModulePlugIns(ActionServlet.java:869)
         at org.apache.struts.action.ActionServlet.init(ActionServlet.java:336)
         at javax.servlet.GenericServlet.init(GenericServlet.java:211)
         at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1091)
         at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:925)
         at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3857)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4118)
         at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:759)
         at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:739)
         at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:524)
         at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:894)
         at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:857)
         at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:475)
         at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1102)
         at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:311)
         at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1020)
         at org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1012)
         at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:442)
         at org.apache.catalina.core.StandardService.start(StandardService.java:450)
         at org.apache.catalina.core.StandardServer.start(StandardServer.java:683)
         at org.apache.catalina.startup.Catalina.start(Catalina.java:537)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:271)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:409)
    Nov 18, 2005 9:26:37 AM org.apache.commons.digester.Digester error
    SEVERE: Parse Error at line 39 column 17: Document root element "form-validation", must match DOCTYPE
    root "null".
    org.xml.sax.SAXParseException: Document root element "form-validation", must match DOCTYPE root "
    null".
         at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(
    ErrorHandlerWrapper.java:236)
         at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error(ErrorHandlerWrapper.
    java:172)
         at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.
    java:382)
         at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.
    java:316)
         at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.scanStartElement(
    XMLNSDocumentScannerImpl.java:183)
         at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl$NSContentDispatcher.
    scanRootElementHook(XMLNSDocumentScannerImpl.java:779)
         at com.sun.org.apache.xerces.internal.impl.
    XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(XMLDocumentFragmentScannerImpl.
    java:1794)
         at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(
    XMLDocumentFragmentScannerImpl.java:368)
         at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.
    java:834)
         at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.
    java:764)
         at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:148)
         at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java
    :1242)
         at org.apache.commons.digester.Digester.parse(Digester.java:1591)
         at org.apache.commons.validator.ValidatorResources.<init>(ValidatorResources.java:159)
         at org.apache.struts.validator.ValidatorPlugIn.initResources(ValidatorPlugIn.java:237)
         at org.apache.struts.validator.ValidatorPlugIn.init(ValidatorPlugIn.java:162)
         at org.apache.struts.action.ActionServlet.initModulePlugIns(ActionServlet.java:869)
         at org.apache.struts.action.ActionServlet.init(ActionServlet.java:336)
         at javax.servlet.GenericServlet.init(GenericServlet.java:211)
         at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1091)
         at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:925)
         at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3857)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4118)
         at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:759)
         at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:739)
         at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:524)
         at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:894)
         at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:857)
         at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:475)
         at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1102)
         at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:311)
         at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1020)
         at org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1012)
         at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:442)
         at org.apache.catalina.core.StandardService.start(StandardService.java:450)
         at org.apache.catalina.core.StandardServer.start(StandardServer.java:683)
         at org.apache.catalina.startup.Catalina.start(Catalina.java:537)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:271)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:409)

    I have not done anything myself, but our desktops do have group policy settings and software/updates do get downloaded sometimes.

  • Getting "the procedure entry point CGImageRelease could not be located in the dynamic link library CoreGraphics.dll" error when starting Itunes. Haved reloaded many times and still the error.

    Getting "the procedure entry point CGImageRelease could not be located in the dynamic link library CoreGraphics.dll" error when starting Itunes. Haved reloaded many times and still the error.

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
    Does iTunes launch properly now?
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
    Re: I recently updated to vista service pack 2 and I updated to itunes

  • Commons-logging Error when starting JRun with Flex

    Created new JRun Server and deployed Flex2 to this server.
    Receiving this error when starting up this server instance.
    Starting Macromedia JRun 4.0 (Build 92909), logicerm2 server
    07/13 22:23:28 info JRun Naming Service listening on *:2911
    07/13 22:23:28 warning No sessionSecret has been specified in
    jrun.xml. Installi
    ng a self generated sessionSecret.
    07/13 22:23:28 info No JDBC data sources have been configured
    for this server (s
    ee jrun-resources.xml)
    07/13 22:23:28 info JRun Web Server listening on *:8102
    07/13 22:23:28 info Deploying enterprise application
    "default-ear" from: file:/C
    :/JRun4/servers/logicerm2/default-ear/
    07/13 22:23:28 info Deploying web application "JRun Default
    Web Application" fro
    m: file:/C:/JRun4/servers/logicerm2/default-ear/
    07/13 22:23:29 info Web Services in default-ear#default-war:
    07/13 22:23:29 info AdminService
    07/13 22:23:29 warning default-war web application has
    'reload' as true in jrun-
    web.xml. Consider setting it false if the application is
    running in production e
    nvironment.
    07/13 22:23:29 warning default-war web application has
    'compile' as true in jrun
    -web.xml. Consider setting it false if the application is
    running in production
    environment.
    07/13 22:23:29 user JSPServlet: init
    07/13 22:23:29 info Deploying web application "Flex Data
    Services" from: file:/C
    :/JRun4/servers/logicerm2/flex/
    07/13 22:23:29 user JSPServlet: init
    07/13 22:23:29 user FlexMxmlServlet: init
    07/13 22:23:29 INFO Loading configuration file
    C:\JRun4\servers\logicerm2\flex\W
    EB-INF\flex\flex-webtier-config.xml
    07/13 22:23:30 INFO Loading configuration file
    C:\JRun4\servers\logicerm2\flex\W
    EB-INF\flex\flex-config.xml
    07/13 22:23:30 user FlexMxmlServlet: Starting Adobe Flex Web
    Tier Compiler
    07/13 22:23:30 user FlexMxmlServlet: Adobe Flex Web Tier
    Compiler Build: 143451
    07/13 22:23:30 user MessageBrokerServlet: init
    07/13 22:23:31 user FlexSwfServlet: init
    07/13 22:23:31 user FlexInternalServlet: init
    07/13 22:23:31 info Deploying web application "Flex Admin Web
    Application" from:
    file:/C:/JRun4/servers/logicerm2/flex-admin/
    07/13 22:23:31 user JSPServlet: init
    07/13 22:23:31 user MessageBrokerServlet: init
    07/13 22:23:31 info Deploying web application "Flex Data
    Services Samples" from:
    file:/C:/JRun4/servers/logicerm2/samples/
    07/13 22:23:31 user JSPServlet: init
    07/13 22:23:31 user FlexMxmlServlet: init
    07/13 22:23:32 INFO Loading configuration file
    C:\JRun4\servers\logicerm2\sample
    s\WEB-INF\flex\flex-webtier-config.xml
    07/13 22:23:32 INFO Loading configuration file
    C:\JRun4\servers\logicerm2\sample
    s\WEB-INF\flex\flex-config.xml
    07/13 22:23:32 user FlexMxmlServlet: Starting Adobe Flex Web
    Tier Compiler
    07/13 22:23:32 user FlexMxmlServlet: Adobe Flex Web Tier
    Compiler Build: 143451
    07/13 22:23:32 user MessageBrokerServlet: init
    07/13 22:23:32 error Could not pre-load servlet:
    MessageBrokerServlet
    [1]org.apache.commons.logging.LogConfigurationException:
    org.apache.commons.logg
    ing.LogConfigurationException:
    org.apache.commons.logging.LogConfigurationExcept
    ion: Invalid class loader hierarchy. You have more than one
    version of 'org.apa
    che.commons.logging.Log' visible, which is not allowed.
    (Caused by org.apache.co
    mmons.logging.LogConfigurationException: Invalid class loader
    hierarchy. You ha
    ve more than one version of 'org.apache.commons.logging.Log'
    visible, which is n
    ot allowed.) (Caused by
    org.apache.commons.logging.LogConfigurationException: or
    g.apache.commons.logging.LogConfigurationException: Invalid
    class loader hierarc
    hy. You have more than one version of
    'org.apache.commons.logging.Log' visible,
    which is not allowed. (Caused by
    org.apache.commons.logging.LogConfigurationExc
    eption: Invalid class loader hierarchy. You have more than
    one version of 'org.
    apache.commons.logging.Log' visible, which is not allowed.))
    at
    org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactory
    Impl.java:543)
    at
    org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactory
    Impl.java:235)
    at
    org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactory
    Impl.java:209)
    at
    org.apache.commons.logging.LogFactory.getLog(LogFactory.java:351)
    at
    org.apache.commons.httpclient.params.DefaultHttpParams.<clinit>(Defau
    ltHttpParams.java:53)
    at
    flex.messaging.services.http.HTTPProxyAdapter.<init>(HTTPProxyAdapter
    .java:111)
    at
    sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native
    Method)
    at
    sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown
    Source)
    at
    sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown
    Sou
    rce)
    at java.lang.reflect.Constructor.newInstance(Unknown Source)
    at java.lang.Class.newInstance0(Unknown Source)
    at java.lang.Class.newInstance(Unknown Source)
    at
    flex.messaging.util.ClassUtil.createDefaultInstance(ClassUtil.java:71
    at
    flex.messaging.Destination.createAdapter(Destination.java:277)
    at
    flex.messaging.Destination.initDestination(Destination.java:103)
    at
    flex.messaging.services.HTTPProxyService.createDestination(HTTPProxyS
    ervice.java:78)
    at
    flex.messaging.services.AbstractService.createDestinations(AbstractSe
    rvice.java:82)
    at
    flex.messaging.config.MessagingConfiguration.createServices(Messaging
    Configuration.java:187)
    at
    flex.messaging.config.MessagingConfiguration.configureBroker(Messagin
    gConfiguration.java:84)
    at
    flex.messaging.MessageBrokerServlet.init(MessageBrokerServlet.java:10
    5)
    at
    jrun.servlet.WebApplicationService.loadServlet(WebApplicationService.
    java:1242)
    at
    jrun.servlet.WebApplicationService.preloadServlets(WebApplicationServ
    ice.java:789)
    at
    jrun.servlet.WebApplicationService.postStart(WebApplicationService.ja
    va:291)
    at
    jrun.deployment.DeployerService.initModules(DeployerService.java:711)
    at
    jrun.deployment.DeployerService.createWatchedDeployment(DeployerServi
    ce.java:242)
    at
    jrun.deployment.DeployerService.deploy(DeployerService.java:430)
    at
    jrun.deployment.DeployerService.checkWatchedDirectories(DeployerServi
    ce.java:179)
    at
    jrun.deployment.DeployerService.run(DeployerService.java:891)
    at
    jrunx.scheduler.SchedulerService.invokeRunnable(SchedulerService.java
    :223)
    at
    jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.j
    ava:426)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
    Caused by:
    org.apache.commons.logging.LogConfigurationException:
    org.apache.comm
    ons.logging.LogConfigurationException: Invalid class loader
    hierarchy. You have
    more than one version of 'org.apache.commons.logging.Log'
    visible, which is not
    allowed. (Caused by
    org.apache.commons.logging.LogConfigurationException: Inval
    id class loader hierarchy. You have more than one version of
    'org.apache.common
    s.logging.Log' visible, which is not allowed.)
    at
    org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogF
    actoryImpl.java:397)
    at
    org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactory
    Impl.java:529)
    ... 30 more
    Caused by:
    org.apache.commons.logging.LogConfigurationException: Invalid class
    l
    oader hierarchy. You have more than one version of
    'org.apache.commons.logging.
    Log' visible, which is not allowed.
    at
    org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogF
    actoryImpl.java:385)
    ... 31 more
    [0]flex.messaging.config.ConfigurationException: Unable to
    create service 'flex.
    messaging.services.HTTPProxyService' for 'proxy-service' due
    to the following er
    ror: org.apache.commons.logging.LogConfigurationException:
    org.apache.commons.lo
    gging.LogConfigurationException: Invalid class loader
    hierarchy. You have more
    than one version of 'org.apache.commons.logging.Log' visible,
    which is not allow
    ed. (Caused by
    org.apache.commons.logging.LogConfigurationException: Invalid cla
    ss loader hierarchy. You have more than one version of
    'org.apache.commons.logg
    ing.Log' visible, which is not allowed.) (Caused by
    org.apache.commons.logging.L
    ogConfigurationException:
    org.apache.commons.logging.LogConfigurationException:
    Invalid class loader hierarchy. You have more than one
    version of 'org.apache.c
    ommons.logging.Log' visible, which is not allowed. (Caused by
    org.apache.commons
    .logging.LogConfigurationException: Invalid class loader
    hierarchy. You have mo
    re than one version of 'org.apache.commons.logging.Log'
    visible, which is not al
    lowed.)).
    at
    flex.messaging.config.MessagingConfiguration.createServices(Messaging
    Configuration.java:202)
    at
    flex.messaging.config.MessagingConfiguration.configureBroker(Messagin
    gConfiguration.java:84)
    at
    flex.messaging.MessageBrokerServlet.init(MessageBrokerServlet.java:10
    5)
    at
    jrun.servlet.WebApplicationService.loadServlet(WebApplicationService.
    java:1242)
    at
    jrun.servlet.WebApplicationService.preloadServlets(WebApplicationServ
    ice.java:789)
    at
    jrun.servlet.WebApplicationService.postStart(WebApplicationService.ja
    va:291)
    at
    jrun.deployment.DeployerService.initModules(DeployerService.java:711)
    at
    jrun.deployment.DeployerService.createWatchedDeployment(DeployerServi
    ce.java:242)
    at
    jrun.deployment.DeployerService.deploy(DeployerService.java:430)
    at
    jrun.deployment.DeployerService.checkWatchedDirectories(DeployerServi
    ce.java:179)
    at
    jrun.deployment.DeployerService.run(DeployerService.java:891)
    at jrunx.scheduler.SchedulerS07/13 22:23:33 user
    FlexSwfServlet: init
    ervice.invokeRunnable(SchedulerService.java:223)
    at
    jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.j
    ava:426)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
    PLEASE Help!!!
    Bernie

    This can happen if you have the default-ear that JRun creates
    and you install the /samples files for Flex Data Services installed
    together.
    The problem is with the commons-logging.jar. If you copy the
    commons-logging.properties file from the
    samples\WEB-INF\flex\jars\commons-logging.properties directory to
    the samples\WEB-INF\classes\commons-logging.properties directory,
    it will resolve the problem.
    This is listed as Adobe FDS bug: 179227

  • I get a error when starting Apache Tomcat 6.0 service

    Hi Friends,
    I get a error when starting Apache Tomcat 6.0 service. Do you help me?
    Kind regards.
    Fatih Temiz
    First Step:
    Second Step:
    Thanks for helps...

    It seems like the JVM is pointing to incorrect .dll file.
    Goto Apache bin directory, and from there open Apache[version]W.exe
    Click the "Java" tab and ensure the first textbox "Java Virtual Machine" is pointed to the correct jvm.dll
    If it was pointed to the JDK then it is wrong. Repoint it to the jre jvm located at \jre6\bin\client\jvm.dll
    Let me know if it resolves the issue.

  • Please help.  Keep getting a conversion error when trying to convert a PDF to a .docx. Advice?

    Please help.  Keep getting a conversion error when trying to convert a PDF to a .docx. Advice?

    Sara,
    Please see my answers in bold below.
    What browser are you using? Try clearing the cache, or using a different browser. N/A
    Are you converting from within Reader, or directly via the ExportPDF website. Within Reader.I disabled the OCR and this did not work either. Try converting from within Reader, and disable OCR as detailed in this document: How to disable Optical Character Recognition (OCR) when converting PDF to Word or Excel.
    Are you on a networked computer? Make sure that there aren't any firewall/proxy settings that are preventing you from uploading files to the Internet. Not having problems uploading the file--that works fine.
    Make sure the file is within the file-size limit of 100 MB. It is <40.
    I get the error message, "File failed to be converted using Adobe ExportPDF online."
    Thanks for your help in advance.

Maybe you are looking for