Error when starting burn
I have looked everywhere for the answer, and if someone has the answer, I obviously didn't look hard enough. When I push burn, to burn a playlist, it gives me an error message in the screen at the top saying, "disc burner or software not found." I have just built my own computer, and I know that my two CD drives can burn. There was no CD that came with my CD drive (Lite-On)that had specific burn software for the drive. It did come with a product like Nero, but I don't think iTunes is referring to that software. How can I fix this?
Here is what the CD dianogtic says:
Microsoft Windows Server 2003 family, Professional Service Pack 1 (Build 3790)
System manufacturer System Product Name
iTunes 6.0.2.23
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
UpperFilters: InCDPass (4.3.12.0), incdrm (4.3.12.0), GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce 7800 GT\GeForce 7800 GT
IDE\DiskMaxtor7L300S0_________________________BANC1G10, Bus Type ATA, Bus Address [0,0]
IDE\CdRomLITE-ONDVDRW_SHW-1635S_________________YS0V___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomNEC_NR-7900A___________________________1.08___, Bus Type ATA, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
The last failed audio CD burn had error code -128(0xffffff80). It happened on drive on -128(0xffffff80) media at speed 0X.
none Other OS Windows x64
UPDATE:
I tried a repair install for iTunes this did not correct the problem. I also tried to update firmware: it didn't work. I then checked to see if my CD-RW drives were fully installed: they were. I also got the newest version of iTunes last night, but that didn't help either. I submitted a ticket about the problem a couple of weeks ago as well. The CD diag. says that it couldn't load iTunes burner. Is there any know correction for this
Does anyone have any thoughts on this?
Similar Messages
-
Cdrecord and others - error when starting burning
HI,
I need some help with this. I googled three hours for solution.
I need to burn win iso image to DVD-R medium.
Here is the error:
$ cdrecord -v -sao dev=/dev/sr0 cswindows7professionalx86.iso
TOC Type: 1 = CD-ROM
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'Slimtype'
Identification : 'DVD A DS8A1P '
Revision : 'CA11'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0011 (DVD-R sequential recording)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording) (current)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1182464 = 1154 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
FIFO size : 4194304 = 4096 KB
Track 01: data 2278 MB
Total size: 2617 MB (259:17.68) = 1166826 sectors
Lout start: 2617 MB (259:19/51) = 1166826 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 1166826 Blocks current: 1166826 Blocks remaining: 0
Speed set to 2770 KB/s
Starting to write CD/DVD at speed 2.0 in real SAO mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Errno: 5 (Input/output error), reserve track scsi sendcmd: no error
CDB: 53 00 00 00 00 00 11 CD EA 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.010s timeout 200s
wodim: Cannot open new session.
Writing time: 0.222s
wodim: fifo had 64 puts and 0 gets.
wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
Here is output of wodim -v -V -inq dev=/dev/sr0
# wodim -v -V -inq dev=/dev/sr0
TOC Type: 1 = CD-ROM
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Executing 'test unit ready' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.001s timeout 40s
Executing 'test unit ready' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.001s timeout 40s
Executing 'inquiry' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB: 12 00 00 00 24 00
cmd finished after 0.000s timeout 40s
Inquiry Data : 05 80 05 32 5B 00 00 00 53 6C 69 6D 74 79 70 65 44 56 44 20 41 20 20 44 53 38 41 31 50 20 20 20 43 41 31 31
Executing 'inquiry' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB: 12 00 00 00 60 00
cmd finished after 0.000s timeout 40s
Inquiry Data : 05 80 05 32 5B 00 00 00 53 6C 69 6D 74 79 70 65 44 56 44 20 41 20 20 44 53 38 41 31 50 20 20 20 43 41 31 31 32 30 30 36 2F 31 32 2F 30 31 20 31 39 3A 30 35 20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Inquiry Data : ...2[...SlimtypeDVD A DS8A1P CA112006/12/01 19:05 ........................................
Executing 'test unit ready' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.001s timeout 40s
Executing 'mode sense g1' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB: 5A 00 3F 00 00 00 00 00 08 00
cmd finished after 0.004s timeout 40s
Mode Sense Data 01 68 41 00 00 00 00 00
Executing 'test unit ready' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.001s timeout 40s
Executing 'mode sense g1' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB: 5A 00 2A 00 00 00 00 00 02 00
cmd finished after 0.002s timeout 40s
Mode Sense Data 00 36
Mode Sense Data (converted) 33
Executing 'test unit ready' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.001s timeout 40s
Executing 'mode sense g1' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB: 5A 00 2A 00 00 00 00 00 38 00
cmd finished after 0.002s timeout 40s
Mode Sense Data 00 36 41 00 00 00 00 00 2A 2E 3F 37 F5 77 29 23 2B 48 01 00 08 00 2B 48 00 10 0A D2 0A D2 00 01 00 00 00 00 0A D2 00 01 00 00 0A D2 00 00 00 00 00 00 00 00 00 00 00 00
Mode Sense Data (converted) 33 41 00 00 2A 2E 3F 37 F5 77 29 23 2B 48 01 00 08 00 2B 48 00 10 0A D2 0A D2 00 01 00 00 00 00 0A D2 00 01 00 00 0A D2 00 00 00 00 00 00 00 00 00 00 00 00
Mode Sense Data 33 41 00 00 2A 2E 3F 37 F5 77 29 23 2B 48 01 00 08 00 2B 48 00 10 0A D2 0A D2 00 01 00 00 00 00 0A D2 00 01 00 00 0A D2 00 00 00 00 00 00 00 00 00 00 00 00
Mode Page Data 2A 2E 3F 37 F5 77 29 23 2B 48 01 00 08 00 2B 48 00 10 0A D2 0A D2 00 01 00 00 00 00 0A D2 00 01 00 00 0A D2 00 00 00 00 00 00 00 00 00 00 00 00
Executing 'test unit ready' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.001s timeout 40s
Executing 'mode sense g1' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB: 5A 00 2A 00 00 00 00 00 38 00
cmd finished after 0.002s timeout 40s
Mode Sense Data 00 36 41 00 00 00 00 00 2A 2E 3F 37 F5 77 29 23 2B 48 01 00 08 00 2B 48 00 10 0A D2 0A D2 00 01 00 00 00 00 0A D2 00 01 00 00 0A D2 00 00 00 00 00 00 00 00 00 00 00 00
Mode Sense Data (converted) 33 41 00 00 2A 2E 3F 37 F5 77 29 23 2B 48 01 00 08 00 2B 48 00 10 0A D2 0A D2 00 01 00 00 00 00 0A D2 00 01 00 00 0A D2 00 00 00 00 00 00 00 00 00 00 00 00
Mode Sense Data 33 41 00 00 2A 2E 3F 37 F5 77 29 23 2B 48 01 00 08 00 2B 48 00 10 0A D2 0A D2 00 01 00 00 00 00 0A D2 00 01 00 00 0A D2 00 00 00 00 00 00 00 00 00 00 00 00
Executing 'test unit ready' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.001s timeout 40s
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'Slimtype'
Identification : 'DVD A DS8A1P '
Revision : 'CA11'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
I tried to add my account and programs like cdrecord edt. to group optical but with no result.
Please, help me. Thank you!As wodim obviously has problems with your burner/firmware, then have you tried growisofs from dvd+rw-tools, or schilling's original cdrecord, which is much more up-2-date than wodim with regards to dvd-writing ?
Personally, I always use wodim for cd-r writes(since wodim works fine for me on cd-r, I do not need to use schilling's "better" version), and then growisofs for all dvd-type writes, and that works great atleast on the 4 different drive-types i've tested it with...
growisofs -dvd-compat -Z /dev/sr0=cswindows7professionalx86.iso
Last edited by mhertz (2011-06-15 13:59:43) -
Receive error when starting iTunes
Receive error when starting iTunes "The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes" I have with no success.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
Hi
We are having SRM5.0.
Trying to create Contract. Workflow Without approval of contract(WS1400086)is activated and start conditions also no workflow activated.
Contract is created and getting message Contract created.
But when tried to release the contract it shows "Awaiting approval".
In Workflow log (SWI1)it shows error."Error when starting work item xxxx".
What could be the reason. Please let me know the solution if anyone of you come across such error.
Thanks in advance
JagadishMasa
It is maintained as General task already.
It seems the workflow task WS14000085 does not have definition.
When checked in SWDD for the above teask there are no steps defined for that workflow.
SAP says that we need to define and action for workflow WS14000085.
But what is the procedure to define the workflow.
I presume this is the standard workflow and it should be defined by default when it comes along with the SRM package.
Anyone of you know how to define the workflow and activate the same?
Regards
Jagadish -
Error when starting parser: timeout during allocate / CPIC-CALL:'TfSAPCMRC'
Hello experts.
When I try to preview or refresh a Crystal Report document built on a BEx query I get the following error msg:
Database connector error: BAPI Error #0. Error when starting parser: timeout during allocate / CPIC-CALL: 'TfSAPCMRCV'.
We have done as suggested in "SAP Note 1032461 - MDX parser does not start", but without success.
This is what we've tried so far:
replaced the file "librfc32.dll" (in C:\Windows\System32 and C:\Windows\SysWOW64) with the new version mentioned in Note 413708.
tested the connection in SM59 - non successful
tested the report query with transaction MDXTEST - non successful
tried to start the mdxparser manually on server - non succesful, error msg: "The application failed to initialise.."
We have the following config:
MS server 2003 SP2 x64 ed.
SAP logon 7.20
MS SQL server 2005
CR 2008
new librfc32.dll version 7200.1.39.6461
Any ideas on what to try next would be highly appreciated!
Cheers, IngAHi Ingo.
We have only one application server.
I registered the new version of the file C:\windows\SysWOW64\librfc32.dll with regsvr32.exe successfully. I've also tried to copy the new file to the same directory as the mdxsvr.exe-file is located, but it made no difference.
Should I remove all other copies of librfc32.dll and only keep the one in folder C:\Windows\SysWOW64, or maybe register them all with regsvr32.exe?
--IngA
Edited by: Ingeborg Andreassen on Nov 5, 2010 10:36 AM -
Error when starting a SWITCH branch (8987)
Hi,
I am testing my workflow which starting with a multiple condition (switch). The workflow process is stopped with the error:
Error when starting a SWITCH branch (8987).
The workflow check shows no warnings or errors. What could be the problem?
Thank you in advance.
/ElvezCheck the workflow container (of the started workflow instance) and see if you spot a problem with one of the container objects used in your switch conditions.
-
Error when starting Mercury Quicke Test Professional
Hello,
I am executing the QTP scripts through eCATT. During execution I got an error ' Error when starting Mercury Quick Test Professional'.
Does anybody knows how to resove this?
Thanks,
MahanteshHi,
This is a common problem if scripting is disabled either on server or on ur sapgui client.
for enabling at server got rz11 tcode and enter sapgui/user_scripting profile and enable scripting there.
Refer my sdn weblogs which shows minimum config for QTP and ECATT and also how to create and run the scripts.
/people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
/people/community.user/blog/2007/01/15/integrating-ecatt-mercury-qtp-part-2
Please reward points. -
Error when starting configtool.
The installation is successful. But I am getting the following error when starting configtool:
PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
com.sap.engine.frame.core.configuration.ConfigurationException: Error while conn
ecting to DB.
This is not during the installation as given in some of the other posts. The installation is successful and I am able to start and run the J2EE engine and the Portal. This error occurs when I try to start the config tool.
Any help would be appreciated. Thanks.Hi Arul,
Have you checked the parameters that the configtool is using to connect? (don't use default settings)
What database is this on? In the case that it is oracle can you TNS ping the db? The listener is running?
Regards
Daniel -
Error when Starting WAD in New System
Hi
We are getting the following error when starting the Web Application Designer.
"Component 'BexWEbApplicationDesigner': available version 64 , Version 154 required bfore you can continue you have to run the front end "
I understand that we are missing some fornt end patch.Where can i get this patch.
Can i get this patch or version in SAPservice market place.
Please help me
How to correct this error.Any thoughts are welcome...
Regards
Pravallika
Message was edited by:
Pravallika ThammineniHi Pravallika,
Do you already have an answer to this problem. I am experiencing the same problem at the moment...
Best Regards
Marcel -
Error when starting Java(TM) ME Platform SDK 3.0
hey guys, I get this error when starting Java(TM) ME Platform SDK 3.0. When I installed it it installed 'successfully' and then I double clicked the file on the desktop (I'm using Windows Vista 32bit Home premium) and it gave me the following error when saying 'Starting Modules':-------------------------------------------------------------------------------
Log Session: Sunday, February 13, 2011 1:52:25 PM GMT
System Info: Product Version = Java(TM) ME Platform SDK 3.0
Operating System = Windows Vista version 6.0 running on x86
Java; VM; Vendor = 1.6.0_23; Java HotSpot(TM) Client VM 19.0-b09; Sun Microsystems Inc.
Runtime = Java(TM) SE Runtime Environment 1.6.0_23-b05
Java Home = C:\Program Files\Java\jdk1.6.0_23\jre
System Locale; Encoding = en_GB (cdctoolbar); Cp1252
Home Directory = C:\Users\Molten Ice
Current Directory = C:\Program Files\Java\Java_ME_platform_SDK_3.0\bin
User Directory = C:\Users\Molten Ice\javame-sdk\toolbar\3.0
Installation = C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\javamesdk1
C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\ide10
C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\java2
C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\mobility8
C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\profiler2
C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9
Boot & Ext. Classpath = C:\Program Files\Java\jdk1.6.0_23\jre\lib\resources.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\rt.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\sunrsasign.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\jsse.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\jce.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\charsets.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\modules\jdk.boot.jar;C:\Program Files\Java\jdk1.6.0_23\jre\classes;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\dnsns.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\localedata.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\sunjce_provider.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\sunmscapi.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\sunpkcs11.jar
Application Classpath = C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\lib\boot.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\lib\org-openide-modules.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\lib\org-openide-util.jar;C:\Program Files\Java\jdk1.6.0_23\lib\dt.jar;C:\Program Files\Java\jdk1.6.0_23\lib\tools.jar
Startup Classpath = C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\core\core.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\core\org-openide-filesystems.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\javamesdk1\core\locale\core_cdctoolbar.jar
WARNING [org.netbeans.core.projects.cache]: Inefficient to include an empty layer in a module: jar:file:/C:/Program%20Files/Java/Java_ME_platform_SDK_3.0/toolbar/javamesdk1/modules/org-netbeans-modules-javame-common.jar!/org/netbeans/modules/javame/common/resources/layer.xml
WARNING [org.netbeans.core.projects.cache]: Inefficient to include an empty layer in a module: jar:file:/C:/Program%20Files/Java/Java_ME_platform_SDK_3.0/toolbar/javamesdk1/modules/org-netbeans-modules-e2e.jar!/org/netbeans/modules/e2e/layer.xml
WARNING [org.openide.filesystems.Ordering]: Not all children in Services/MIMEResolver/ marked with the position attribute: [org-netbeans-modules-javame-netmon-data-NetMonDataResolver.xml], but some are: [org-netbeans-modules-java-mime-resolver.xml, org-apache-tools-ant-module-mime-resolver.xml, org-netbeans-modules-editor-settings-storage-mime-resolver.xml, org-netbeans-modules-url-mime-resolver.xml, org-netbeans-modules-pdf-mime-resolver.xml, org-netbeans-modules-jar-mime-resolver.xml, org-netbeans-modules-editor-codetemplates-mime-resolver.xml]
WARNING [org.openide.filesystems.Ordering]: Not all children in Services/MIMEResolver/ marked with the position attribute: [org-netbeans-modules-javame-netmon-data-NetMonDataResolver.xml], but some are: [org-netbeans-modules-java-mime-resolver.xml, org-apache-tools-ant-module-mime-resolver.xml, org-netbeans-modules-editor-settings-storage-mime-resolver.xml, org-netbeans-modules-url-mime-resolver.xml, org-netbeans-modules-pdf-mime-resolver.xml, org-netbeans-modules-jar-mime-resolver.xml, org-netbeans-modules-editor-codetemplates-mime-resolver.xml]
[ 0] INFO - ootstrap.PropertyEditorManager - Registering custom property editors
[ 117] INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
[ 217] INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
[ 317] INFO - bootstrap.ObjectGraphProcessor - Calculating order...
[ 417] INFO - bootstrap.ObjectGraphProcessor - Calculated order
[ 523] INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
[ 627] INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
[ 732] INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
[ 832] INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
[ 932] INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
[ 1032] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 2166] WARN - mpl.ObjectServerConnectionImpl - Remote object server is not running at service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 2268] INFO - l.process.GenericProcessRunner - Starting process: C:\Program Files\Java\Java_ME_platform_SDK_3.0/bin/device-manager.exe
[ 3384] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 5476] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 7576] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 9677] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 11777] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 13877] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 15977] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 18077] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 20177] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 22277] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 23379] ERROR - un.jme.toolkit.bootstrap.Batch - Problem calling start() on DeviceManagerConnection
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.jme.toolkit.bootstrap.Batch.invoke(Unknown Source)
at com.sun.jme.toolkit.bootstrap.Batch.tryInvoke(Unknown Source)
at com.sun.jme.toolkit.bootstrap.Batch.startObjects(Unknown Source)
at org.netbeans.modules.javame.common.container.Module.start(Module.java:21)
at org.netbeans.modules.javame.common.container.ContainerSupport.startModule(ContainerSupport.java:67)
at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManagerConnection(DevicemanagerHelper.java:41)
at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.ensureConnected(DevicemanagerHelper.java:48)
at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManager(DevicemanagerHelper.java:84)
at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.ensureDMStarted(AutoInstaller.java:292)
at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.restored(AutoInstaller.java:63)
at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:421)
at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:342)
at org.netbeans.ModuleManager.enable(ModuleManager.java:906)
at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
at org.netbeans.core.startup.Main.getModuleSystem(Main.java:165)
at org.netbeans.core.startup.Main.start(Main.java:312)
at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.io.IOException: Failed to retrieve RMIServer stub: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect]
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:338)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.connect(Unknown Source)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.start(Unknown Source)
... 24 more
Caused by: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect]
at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:101)
at com.sun.jndi.toolkit.url.GenericURLContext.lookup(GenericURLContext.java:185)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(RMIConnector.java:1886)
at javax.management.remote.rmi.RMIConnector.findRMIServer(RMIConnector.java:1856)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:257)
... 27 more
Caused by: java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:97)
... 32 more
Caused by: java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at java.net.Socket.connect(Socket.java:478)
at java.net.Socket.<init>(Socket.java:375)
at java.net.Socket.<init>(Socket.java:189)
at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
... 37 more
SEVERE [org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper]: Cannot connect to device manager
java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at java.net.Socket.connect(Socket.java:478)
at java.net.Socket.<init>(Socket.java:375)
at java.net.Socket.<init>(Socket.java:189)
at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
Caused: java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:97)
Caused: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect]
at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:101)
at com.sun.jndi.toolkit.url.GenericURLContext.lookup(GenericURLContext.java:185)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(RMIConnector.java:1886)
at javax.management.remote.rmi.RMIConnector.findRMIServer(RMIConnector.java:1856)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:257)
Caused: java.io.IOException: Failed to retrieve RMIServer stub
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:338)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.connect(Unknown Source)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.start(Unknown Source)
Caused: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.jme.toolkit.bootstrap.Batch.invoke(Unknown Source)
at com.sun.jme.toolkit.bootstrap.Batch.tryInvoke(Unknown Source)
at com.sun.jme.toolkit.bootstrap.Batch.startObjects(Unknown Source)
at org.netbeans.modules.javame.common.container.Module.start(Module.java:21)
at org.netbeans.modules.javame.common.container.ContainerSupport.startModule(ContainerSupport.java:67)
at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManagerConnection(DevicemanagerHelper.java:41)
at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.ensureConnected(DevicemanagerHelper.java:48)
[catch] at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManager(DevicemanagerHelper.java:84)
at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.ensureDMStarted(AutoInstaller.java:292)
at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.restored(AutoInstaller.java:63)
at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:421)
at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:342)
at org.netbeans.ModuleManager.enable(ModuleManager.java:906)
at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
at org.netbeans.core.startup.Main.getModuleSystem(Main.java:165)
at org.netbeans.core.startup.Main.start(Main.java:312)
at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
at java.lang.Thread.run(Thread.java:662)
[ 23598] INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
[ 23698] INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
[ 23798] INFO - bootstrap.ObjectGraphProcessor - Calculating order...
[ 23898] INFO - bootstrap.ObjectGraphProcessor - Calculated order
[ 23998] INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
[ 24098] INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
[ 24198] INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
[ 24298] INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
[ 24398] INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
[ 24498] INFO - un.jme.toolkit.bootstrap.Batch - Objects started
[ 24600] INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
[ 24700] INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
[ 24800] INFO - bootstrap.ObjectGraphProcessor - Calculating order...
[ 24900] INFO - bootstrap.ObjectGraphProcessor - Calculated order
[ 25000] INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
[ 25100] INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
[ 25202] INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
[ 25302] INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
[ 25402] INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
[ 25502] INFO - un.jme.toolkit.bootstrap.Batch - Objects started
[ 25602] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 26699] WARN - mpl.ObjectServerConnectionImpl - Remote object server is not running at service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 26799] INFO - l.process.GenericProcessRunner - Starting process: C:\Program Files\Java\Java_ME_platform_SDK_3.0/bin/device-manager.exe
[ 27914] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 30005] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 32106] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 34206] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 36306] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 38406] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 40506] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 42607] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 44706] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 46806] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
SEVERE [org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper]: Cannot connect to device manager
java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at java.net.Socket.connect(Socket.java:478)
at java.net.Socket.<init>(Socket.java:375)
at java.net.Socket.<init>(Socket.java:189)
at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
Caused: java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:97)
Caused: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect]
at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:101)
at com.sun.jndi.toolkit.url.GenericURLContext.lookup(GenericURLContext.java:185)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(RMIConnector.java:1886)
at javax.management.remote.rmi.RMIConnector.findRMIServer(RMIConnector.java:1856)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:257)
Caused: java.io.IOException: Failed to retrieve RMIServer stub
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:338)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.connect(Unknown Source)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.start(Unknown Source)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.lookupMBean(Unknown Source)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.findObject(Unknown Source)
[catch] at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.openConnection(DevicemanagerHelper.java:53)
at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManager(DevicemanagerHelper.java:86)
at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.ensureDMStarted(AutoInstaller.java:292)
at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.restored(AutoInstaller.java:63)
at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:421)
at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:342)
at org.netbeans.ModuleManager.enable(ModuleManager.java:906)
at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
at org.netbeans.core.startup.Main.getModuleSystem(Main.java:165)
at org.netbeans.core.startup.Main.start(Main.java:312)
at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
at java.lang.Thread.run(Thread.java:662)
[ 48018] INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
[ 48118] INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
[ 48218] INFO - bootstrap.ObjectGraphProcessor - Calculating order...
[ 48318] INFO - bootstrap.ObjectGraphProcessor - Calculated order
[ 48418] INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
[ 48518] INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
[ 48618] INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
[ 48718] INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
[ 48818] INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
[ 48918] INFO - un.jme.toolkit.bootstrap.Batch - Objects started
[ 49018] INFO - bootstrap.ObjectGraphPI did install Nokia's SDK with NetBeans and this works perfectly.
I went through with everything recommended here: http://blogs.sun.com/javamesdk/entry/first_aid_when_emulator_doesn
But nothing worked.
Any help appreciated!
Thanks.Note: This thread was originally posted in the [Sun Java Wireless Toolkit|http://forums.sun.com/forum.jspa?forumID=82] forum, but moved to this forum for closer topic alignment.
-
Error when starting weblogic server 10.3.6
hi am having below error when starting my weblogic server am in window xp
C:\mydomain\base_domain\bin>DIR
Volume in drive C is WinXP
Volume Serial Number is F086-F167
Directory of C:\mydomain\base_domain\bin
22/04/2011 11:10 PM <DIR> .
22/04/2011 11:10 PM <DIR> ..
22/04/2011 11:10 PM <DIR> nodemanager
22/04/2011 11:10 PM <DIR> server_migration
22/04/2011 11:10 PM <DIR> service_migration
29/11/2011 10:14 PM 14,273 setDomainEnv.cmd
29/11/2011 10:14 PM 16,221 setDomainEnv.sh
29/11/2011 10:14 PM 3,322 startManagedWebLogic.cmd
29/11/2011 10:14 PM 3,147 startManagedWebLogic.sh
29/11/2011 10:14 PM 5,914 startWebLogic.cmd
29/11/2011 10:14 PM 5,657 startWebLogic.sh
29/11/2011 10:14 PM 2,528 stopManagedWebLogic.cmd
29/11/2011 10:14 PM 2,391 stopManagedWebLogic.sh
29/11/2011 10:14 PM 2,103 stopWebLogic.cmd
29/11/2011 10:14 PM 2,081 stopWebLogic.sh
10 File(s) 57,637 bytes
5 Dir(s) 6,815,825,920 bytes free
C:\mydomain\base_domain\bin>START startWebLogic.cmd
C:\mydomain\base_domain\bin>
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=
128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C
:\PROGRA~1\Java\JDK16~1.0_2\lib\tools.jar;C:\wlserver\server\lib\weblogic_sp.jar
;C:\wlserver\server\lib\weblogic.jar;C:\modules\features\weblogic.server.modules
_10.3.4.0.jar;C:\wlserver\server\lib\webservices.jar;C:\modules\org.apache.ant_1
.7.1/lib/ant-all.jar;C:\modules\net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.
jar;C:\oracle\Middleware\wlserver_10.3\sip\server\lib\weblogic_sip.jar;C:\Oracle
\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\wlserver\common\derby\li
b\derbyclient.jar;C:\wlserver\server\lib\xqrl.jar
PATH=;C:\wlserver\server\native\win\32;C:\wlserver\server\bin;C:\modules\org.apa
che.ant_1.7.1\bin;C:\PROGRA~1\Java\JDK16~1.0_2\jre\bin;C:\PROGRA~1\Java\JDK16~1.
0_2\bin;C:\Program Files\PC Connectivity Solution\;C:\product\11.2.0\dbhome_1\bi
n;C:\product\11.2.0\dbhome_1;C:\forms;C:\DevSuiteHome_1\jlib;C:\Program Files\PH
P;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Commo
n Files\Roxio Shared\DLLShared;C:\Program Files\Common Files\Roxio Shared\DLLSha
red;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared;C:\Program Files\Co
mmon Files\DivX Shared;c:\Program Files\Java\jdk1.6.0_21\bin;C:\Program Files\Co
mmon Files\Roxio Shared\10.0\DLLShared;C:\Program Files\Common Files\Roxio Share
d\DLLShared;C:\Program Files\Common Files\Roxio Shared\10.0\DLLShared;C:\mywls;C
:\mydomain\base_domain\bin;C:\Program Files\Java\jre6\bin\client;C:\Program File
s\Java\jre6\bin;C:\Program Files\Java\jdk1.6.0_21\jre\bin;C:\Program Files\Java\
jdk1.6.0_21\bin;C:\Program Files\Java\jdk1.6.0_21;C:\Program Files\Java\jre6;C:\
DevSuiteHome_1\forms;C:\DevSuiteHome_1\cgenf61\admin;C:\DevSuiteHome_1\forms;C:\
forms\sms_code.pll;C:\mywls\wlserver;C:\Java\jdk1.6.0_21;C:\wlserver\server\nati
ve\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_21"
Java(TM) SE Runtime Environment (build 1.6.0_21-b07)
Java HotSpot(TM) Client VM (build 17.0-b17, mixed mode)
Starting WLS with line:
C:\PROGRA~1\Java\JDK16~1.0_2\bin\java -client -Xms256m -Xmx512m -XX:CompileThr
eshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=AdminServer
-Djava.security.policy=C:\wlserver\server\lib\weblogic.policy -Xverify:none -ea
:com.bea.wcp... -da -Dplatform.home=C:\wlserver -Dwls.home=C:\wlserver\server
-Dweblogic.home=C:\wlserver\server -Dcommon.components.home=C:\Oracle\MIDDLE~1\
ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.common
s.logging.impl.Jdk14Logger -Ddomain.home=C:\mydomain\BASE_D~1 -Djrockit.optfile=
C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Dorac
le.server.config.dir=C:\mydomain\BASE_D~1\config\FMWCON~1\servers\AdminServer -D
oracle.domain.config.dir=C:\mydomain\BASE_D~1\config\FMWCON~1 -Digf.arisidbeans
.carmlloc=C:\mydomain\BASE_D~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\
mydomain\BASE_D~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:
\mydomain\BASE_D~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\
mydomain\BASE_D~1\servers\AdminServer\tmp\_WL_user -Doracle.deployed.app.ext=\-
-Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.os
soiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djav
a.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=f
alse -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole
= -Dwlw.logErrorsToConsole= weblogic.Server
Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/Server
Caused by: java.lang.ClassNotFoundException: weblogic.Server
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Could not find the main class: weblogic.Server. Program will exit.
my set is
C:\mydomain\base_domain\bin>SET
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\Desmond\Application Data
CLIENTNAME=Console
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=MADIMAD-B533821
ComSpec=C:\WINDOWS\system32\cmd.exe
FORMS90_PATH=C:\forms
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\Desmond
LOGONSERVER=\\MADIMAD-B533821
NUMBER_OF_PROCESSORS=2
ORACLE_HOME=C:\product\11.2.0\dbhome_1
OS=Windows_NT
Path=C:\Program Files\PC Connectivity Solution\;C:\product\11.2.0\dbhome_1\bin;C
:\product\11.2.0\dbhome_1;C:\forms;C:\DevSuiteHome_1\jlib;C:\Program Files\PHP;C
:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Common F
iles\Roxio Shared\DLLShared;C:\Program Files\Common Files\Roxio Shared\DLLShared
;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared;C:\Program Files\Commo
n Files\DivX Shared;c:\Program Files\Java\jdk1.6.0_21\bin;C:\Program Files\Commo
n Files\Roxio Shared\10.0\DLLShared;C:\Program Files\Common Files\Roxio Shared\D
LLShared;C:\Program Files\Common Files\Roxio Shared\10.0\DLLShared;C:\mywls;C:\m
ydomain\base_domain\bin;C:\Program Files\Java\jre6\bin\client;C:\Program Files\J
ava\jre6\bin;C:\Program Files\Java\jdk1.6.0_21\jre\bin;C:\Program Files\Java\jdk
1.6.0_21\bin;C:\Program Files\Java\jdk1.6.0_21;C:\Program Files\Java\jre6;C:\Dev
SuiteHome_1\forms;C:\DevSuiteHome_1\cgenf61\admin;C:\DevSuiteHome_1\forms;C:\for
ms\sms_code.pll;C:\mywls\wlserver;C:\Java\jdk1.6.0_21
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PHPRC=C:\Program Files\PHP\
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 23 Stepping 10, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=170a
ProgramFiles=C:\Program Files
PROMPT=$P$G
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\Desmond\LOCALS~1\Temp
TMP=C:\DOCUME~1\Desmond\LOCALS~1\Temp
USERDOMAIN=MADIMAD-B533821
USERNAME=Desmond
USERPROFILE=C:\Documents and Settings\Desmond
windir=C:\WINDOWS
aa__COMPAT_LAYER=EnableNXShowUITshifhiwa,
Back again? Nothing learned?
No jdev version?
You should n^know by now that you have to give at least some basic information.
A description of what you tried to do outside the listing would help too.
Timo -
Error when starting submethod -
Dear Experts,
we are using standard work flow for Appropriation Request(AR) approving.
Approvers are geting mail to SAP inbox.
when double click on inbox->worlflow item for that particular AR, it goest AR display screen & when we click on balk(F3) goes to screen where we can click on "approve" , " Reject" buttons.
now issue is once double click on inbox item gives infor message saying "Error when starting submethod"(Message no. SWF_RUN637) & goes to approval screen directly.
Please help to correct this issue.
Thanks & kind Regards,
SLHi,
The issue might be with the secondary methods of the decision step. Check if any secondary methods are included in the decision step. and make sure when you are using the secondary methods you should ahve the instance of the business object.. in the workflow container so that the methods that you want to execute parallel while or before executing the workitem.
The secondary methods will be listed out under METHODS tab of decision step
Regards
Pavan -
Windows error when starting iTunes 5.
Hey.
My iTunes suddenly started giving me a Windows error when starting it. I installed iTunes 5 instead of iTunes 4 recently, and it has been running. But today when I wanted to transfer some more music to my iPod iTunes wouldn't start. I just get the Windows Error... thing. What can I do? I already tried to reinstall it, but as you know, it's god d*mn impossible to completely delete Apple software without a format.
I talked to a friend of mine who had experienced the same problem, but it was his firewall/antivirus (F-Secure) that was the problem, and I'm running PC-Cillin - which I tried to disable, but it didn't help.
Help, thank you.Deffo a missing quicktime issue. See my post Chris Rocco, "itunes launching problem.", 07:20am Oct 2, 2005 CDT
Itunes relies for some unknown reason on compression technologies in quicktime libraries. Crazy! No more quicktime alternative! -
MissingResourceException Error when Starting Application
I am getting the following error when starting an Enterprise application in weblogic 10.3.6:
.MissingResourceException: Can't find bundle for base name resources.Messages, locale en
A snippet from my faces-config.xml file:
<application>
<locale-config>
<default-locale>en_US</default-locale>
<supported-locale>ko_KR</supported-locale>
</locale-config>
<message-bundle>resources.application</message-bundle>
<message-bundle>resources.Messages</message-bundle>
<resource-bundle>
<base-name>resources.Messages</base-name>
<var>msgs</var>
</resource-bundle>
<resource-bundle>
<base-name>resources.ErrorMessages</base-name>
<var>errorMsgs</var>
</resource-bundle>
<resource-bundle>
<base-name>resources.Labels</base-name>
<var>labels</var>
</resource-bundle>
</application>
I have an Enterprise Application (.ear file) that contains one WAR file. The War file includes resources in the following structure:
.war
WEB-INF
classes
resources
Messages_en_US.properties
Messages_ko_KR.properties
How can I correct this error?I successfully installed SAP NetWeaver 7.01 ABAP Trial Version on Vista home edition. I was able to start the application server by following the steps outlined by Marcelo Ramos at the following link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0c0bdf1-3440-2b10-db8a-ae16f614745d
I hope this helps someone else as well.
Barbara -
Security Error when starting the server - WPLS 7.0
Security Error when starting the server - WPLS 7.0
what may be the reason ...
console :
BUILD SUCCESSFUL
Total time: 3 seconds
Starting WebLogic Server...
<May 30, 2005 4:22:15 PM IST> <Notice> <Management> <140005> <Loading configuration C:\cpDomain\.\config.xml>
<May 30, 2005 4:22:18 PM IST> <Info> <Logging> <000000> <FileLogger Opened at C:\cpDomain\portalServer\weblogi
c.portalServer.log>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090516> <The RoleMapper provider has preexisting LDAP data.>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090516> <The Authorizer provider has preexisting LDAP data.>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090143> <The weblogic keystore provider DefaultKeyStore in re
alm cprealm cannot be used for private keys because its configured private key keystore file wlDefaultKeyStore
.jks does not exist.>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090142> <The weblogic keystore provider DefaultKeyStore in re
alm cprealm cannot be used for trusted (root) CAs because its trusted (root) CA keystore was not configured.>
<May 30, 2005 4:22:21 PM IST> <Notice> <Security> <090082> <Security initializing using realm cprealm.>
<May 30, 2005 4:22:21 PM IST> <Critical> <WebLogicServer> <000364> <Server failed during initialization. Excep
tion:java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
<May 30, 2005 4:22:21 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to initialize the server: Fatal in
itialization exception
Throwable: java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
Reason: Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
C:\cpDomain\bin>
Thanks
Thanks & Regards,
Siva VP,
[email protected]Looks like you cannot connect to LDAP. Are you configured correctly?
Maybe you are looking for
-
After iOS 8 update, iPad lost 3G connection
Hi After iOS 8.0 update my iPad (iPad2 Wi-Fi + 3G 32GBModel A1396 MC983KS/A) looses 3G connection. When I restart iPad it has good 3G connection. After few hours, when I have closed my cover and check IPad again 3G/2G connection has lost. Connection
-
How to send the entire process payload as an attachment in the Email
Hi All, I have a requirement in my present project. If is there is any exception while executing the process, we have to send the Error Email notification to the end user with entire process payload as an attachment. we are using the SOA Suite 11.1.1
-
Hi, My Mac Mini has been booting up super slow, and taking forever to shut down. It also hangs frequently. I have disconnected external hard drives from the computer, and that didn't help. I ran etrecheck, and the results are below. Anything obvi
-
Hello all, i've been searching into the forum for solutions to my problem, but i've found nothing. I will explain my question: I have one pricing procedure with one condition type that goes to sub-total KZWI6. This is OK. But now, i want to add this
-
Safari not showing some text on phpBB3 Forum
When I go to the main page on my forum using Safari, where it says "no new posts" at each section it shows up as a box with a blue question mark as if it's an image. When I go to the same page using any other browser, camino, firefox etc it shows up