Error when switching accounts in XP

I get an error when I switch to another account on my win xp prof.
the error message is "
Core Center
Failed to load hardware monitor driver
When I click OK I get the next error message "
No Hardware Monitor !
After clicking OK again the systems craches en reboots
Anyons know how to fix this ??
TiA

I personally don't reccomend the use of "corecenter" and I don't have a solution, but what it sounds like to me is a poorly scripted peice of software. See, when you "switch" accounts, but don't log off, some of the registry remains, and possibily the software doesn't see that you have switched users, so it's looking around for something that isn't there.
So in other words, I don't like corecenter, most of us around here use speedfan.
So if anyone knows of a solution....

Similar Messages

  • Dreamweaver 6.1 - JavaScript error when switching between open tabs

    When switching between open tabs a sequence of javascript
    errors occurs. I had not used Dreamweaver for about 2 weeks, and
    last time I used it with no problems.
    I have tried uninstalling it, OKing removal of all files when
    asked, re-installing it and updating with dwmx61_updater.exe, but I
    still get the same errors.
    This has rendered the software virtually unuseable, so any
    help would be greatly appreciated, as I'm working to a
    rapidly-approaching deadline.
    "While executing Browse_Back enabled in toolbars.xml, a
    JavaScript error occurred"
    followed by
    "While executing Browse_Forward enabled in toolbars.xml, a
    JavaScript error occurred"
    followed by
    "While executing Browse_Stop enabled in toolbars.xml, a
    JavaScript error occurred"
    The relevant code seems to be :
    <!-- Browser nav toolbar -->
    <toolbar id="Browser_Toolbar" platform="win"
    label="Browser Navigation" container="document"
    initiallyVisible="false">
    <button id="Browse_Back"
    image="Toolbars/images/MM/back.gif"
    disabledImage="Toolbars/images/MM/back_dis.gif"
    tooltip="Back"
    label="Back"
    enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
    command="dw.getDocumentDOM().browser.backPage()"
    update="onEveryIdle"/>
    <button id="Browse_Forward"
    image="Toolbars/images/MM/forward.gif"
    disabledImage="Toolbars/images/MM/forward_dis.gif"
    tooltip="Forward"
    label="Forward"
    enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
    command="dw.getDocumentDOM().browser.forwardPage()"
    update="onEveryIdle"/>
    <button id="Browse_Stop"
    image="Toolbars/images/MM/stop.gif"
    disabledImage="Toolbars/images/MM/stop_dis.gif"
    tooltip="Stop"
    label="Stop"
    enabled="dw.getDocumentDOM().browser.getPageBusy()"
    command="dw.getDocumentDOM().browser.stopPage()"
    update="onBrowserPageBusyChange"/>
    <button id="Browse_Refresh"
    image="Toolbars/images/MM/browserRefresh.gif"
    tooltip="Refresh"
    label="Refresh"
    enabled="true"
    command="dw.getDocumentDOM().browser.refreshPage()"/>
    presumably the next error is caused by the previous ones
    failing :
    "While executing getCurrentValue in AddressURL.htm, a
    JavaScript error occurred"
    the relevan tcode :
    function getCurrentValue()
    var dom = dw.getDocumentDOM();
    var value = dom.browser.getURL();
    if (value && value.length)
    //check if is it not a temp file
    //extract the tail of the url
    var filename = value;
    var slashIndex = filename.lastIndexOf("/");
    filename = filename.substring(slashIndex+1);
    var tempIndex = filename.indexOf("TMP");
    if (tempIndex != 0)
    addRecentAddress(value);
    return value;

    You can try this simple fix -
    Quit DW.
    Find this folder -
    C:\Documents and Settings\<username>\Application
    Data\Macromedia\Dreamweaver
    8\Configuration\WinFileCache-*.dat
    (these folders are normally hidden - you may have to use
    Explorer > Tools >
    Folder Options to unhide them)
    and delete it.
    Restart DW. Works better?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "earthdoctor" <[email protected]> wrote in
    message
    news:[email protected]...
    > When switching between open tabs a sequence of
    javascript errors occurs. I
    > had
    > not used Dreamweaver for about 2 weeks, and last time I
    used it with no
    > problems.
    >
    > I have tried uninstalling it, OKing removal of all files
    when asked,
    > re-installing it and updating with dwmx61_updater.exe,
    but I still get the
    > same
    > errors.
    >
    > This has rendered the software virtually unuseable, so
    any help would be
    > greatly appreciated, as I'm working to a
    rapidly-approaching deadline.
    >
    >
    > "While executing Browse_Back enabled in toolbars.xml, a
    JavaScript error
    > occurred"
    > followed by
    > "While executing Browse_Forward enabled in toolbars.xml,
    a JavaScript
    > error
    > occurred"
    > followed by
    > "While executing Browse_Stop enabled in toolbars.xml, a
    JavaScript error
    > occurred"
    >
    > The relevant code seems to be :
    >
    > <!-- Browser nav toolbar -->
    >
    > <toolbar id="Browser_Toolbar" platform="win"
    label="Browser
    > Navigation"
    > container="document" initiallyVisible="false">
    >
    > <button id="Browse_Back"
    > image="Toolbars/images/MM/back.gif"
    > disabledImage="Toolbars/images/MM/back_dis.gif"
    > tooltip="Back"
    > label="Back"
    >
    enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
    > command="dw.getDocumentDOM().browser.backPage()"
    > update="onEveryIdle"/>
    >
    > <button id="Browse_Forward"
    > image="Toolbars/images/MM/forward.gif"
    > disabledImage="Toolbars/images/MM/forward_dis.gif"
    > tooltip="Forward"
    > label="Forward"
    >
    enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
    > command="dw.getDocumentDOM().browser.forwardPage()"
    > update="onEveryIdle"/>
    >
    > <button id="Browse_Stop"
    > image="Toolbars/images/MM/stop.gif"
    > disabledImage="Toolbars/images/MM/stop_dis.gif"
    > tooltip="Stop"
    > label="Stop"
    > enabled="dw.getDocumentDOM().browser.getPageBusy()"
    > command="dw.getDocumentDOM().browser.stopPage()"
    > update="onBrowserPageBusyChange"/>
    >
    > <button id="Browse_Refresh"
    > image="Toolbars/images/MM/browserRefresh.gif"
    > tooltip="Refresh"
    > label="Refresh"
    > enabled="true"
    > command="dw.getDocumentDOM().browser.refreshPage()"/>
    >
    >
    >
    > presumably the next error is caused by the previous ones
    failing :
    >
    > "While executing getCurrentValue in AddressURL.htm, a
    JavaScript error
    > occurred"
    > the relevan tcode :
    >
    >
    > function getCurrentValue()
    > {
    > var dom = dw.getDocumentDOM();
    > var value = dom.browser.getURL();
    > if (value && value.length)
    > {
    > //check if is it not a temp file
    > //extract the tail of the url
    > var filename = value;
    > var slashIndex = filename.lastIndexOf("/");
    > filename = filename.substring(slashIndex+1);
    > var tempIndex = filename.indexOf("TMP");
    > if (tempIndex != 0)
    > {
    > addRecentAddress(value);
    > }
    > }
    > return value;
    > }
    >
    >

  • 11i Error when modifying account

    eBus 11.5.10.2, DB 10.2.0.4, OID 10.1.4.0.1, RHEL4
    Apps and OID on are on the same server, single instance, DB is on a seperate server.
    Recently when we try to modify the account of a user we experience an error when trying to save the changes.
    The pop-up error states:
    Unabled to call fnd_ldap_wrapper.update_user due to the following reason:
    ORA-20001: Unabled to call fnd_ldap_wrapper.update_user due to the following reason:
    An unexpected error occured. Please contact System Administrator.. (USER_NAME-XXXXXXX)
    I enabled logging for FND and got the following in the fnd_log_messages table:
    fnd.plsql.oid.fnd_oid_plug.get_realm_dn: LDAP SESSION closing in EXCEPTION BLOCK - START
    fnd.plsql.oid.fnd_oid_plug.get_realm_dn: LDAP SESSION closed in EXCEPTION BLOCK - END
    fnd.plsql.oid.fnd_ldap_wrapper.update_user: ORA-06503: PL/SQL: Function returned without value
    fnd.plsql.oid.fnd_ldap_wrapper.update_user: l_err_code :FND_SSO_UNEXP_ERROR, l_tmp_str :ORA-06503: PL/SQL: Function returned without value
    So it seems something returns without a value, but I am not sure how to track down what. I checked and the user account is in OID. It seems to be occuring to accounts that are linked via the "Customer" field on Define as opposed to "Person"
    What can I enable log wise or check to find the cause of this issue? I have searched metalink and all the documents I have found concerning Function not returning a value are for other items and not accounts.
    Thanks
    Edited by: Toolman21 on Sep 16, 2010 10:47 AM

    Just to update the forum post, I have finally discovered the issue. The Global User ID that was in eBus did not match that in OID, therefore it was returning not found.
    The solution was to update the GUID in APPS.FND_USER to match what OID contained. If the SSO link on the fly feature is used in provisioning you can simply set the USER_GUID column in APPS.FND_USER to null for that user and once they log in again it will be repopulated from OID. Alternatively you can use the script $FND_TOP/patch/115/sql/fndssouu.sql to change this for a user as well.
    @$FND_TOP/patch/115/sql/fndssouu.sql USERNAME
    Thanks for the help.

  • Master data error - when switching an attribute to navigable

    Hi,
    I have a serious problem on a master data. I have this master data that until yesterday did have not a problem.
    Now, when I add an attribute not navigable (DIS), no problem. When I switch to DISPLAY and activate, following error occurs:
    Error in activating the InfoObjects
    Characteristic 0FS_CTR_NO: The attibutes SID table(s) could not be filled
    Error in BW:
    Error when activating InfoObject 0FS_CTR_NO
    Characteristic 0FS_CTR_NO: Error when generating master data routines
    Error when resetting InfoObject 0FS_CTR_NO to the active version
    I tried to make this modification also directly in Quality without transport, and the error is the same.
    Master data is empty, so I cannot understand why there is a problem with SIDS.
    Any suggestions?
    Thanks,
    Gianluca

    Hi,
    as Raj said,  when infoobject attribute is changed from dispaly attribute to navigational attribute there will be impact.
    check this thread.
    Link: [Error when activating 0MATERIAL after adding Navigation attribute]
    Regards
    Daya Sagar

  • Sync Setup gives unknown error when creating account

    Getting "unknown error" when trying to setup sync account. i have the latest version of firefox. i cleared the cache. I did a factory reset. none of it worked.

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    Did you ever used sync before and have previously created an account?
    *https://services.mozilla.com/ Firefox Sync » Home
    *https://account.services.mozilla.com/

  • Encounter "500 Unexpected Error" when admin account access to ECP

    Symptom： 
    In Exchange 2013, when using admin account to access ECP, you will get an error “500 Unexpected” as below. However, when using the same account to access OWA, everything is ok, and other normal accounts can access OWA also.
    At the same time, if you check the event log, you will get the following error:
    Current users: “yourdomain.com/User/admin”Request for URL 'https://servername.yourdomain.com:444/ecp/default.aspx(https://servername/ecp/)' failed with the following error: System.Configuration.ConfigurationErrorsException: “                                               
    ” (hexadecimal value 0x03)is an invalid character. Line 1, position 1 (C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\ecp\quarantine\web.config line 1) ---> System.Xml.XmlException: “                                               
    ” (hexadecimal value 0x03)is an invalid character. Line 1, position 1     System.Xml.XmlTextReaderImpl.Throw(String res, String[] args)     System.Xml.XmlTextReaderImpl.ParseRootLevelWhitespace()    
    System.Xml.XmlTextReaderImpl.ParseDocumentContent()     System.Configuration.XmlUtil..ctor(Stream stream, String name, Boolean readToFirstElement, ConfigurationSchemaErrors schemaErrors)     System.Configuration.BaseConfigurationRecord.InitConfigFromFile()
    Cause：
    According to the error information, there are some invalid characters in the file (C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\ecp\quarantine\web.config ).
    In Exchange Mailbox server, when we open this file with notepad, we will find that all the content are garbled. That is the cause.
    Solution: 
    1. Try to copy the following code to replace the contents of the file, and save it.
    2. Restart mailbox server.
    <?xml version="1.0"?>
    <configuration>
      <location path="Quarantine.slab">
        <system.web>
          <authorization>
            <allow roles="Get-QuarantineMessage@R:Organization"/>
            <!-- Deny everyone else -->
            <deny users="*"/>
          </authorization>
        </system.web>
      </location>
      <location path="EditQuarantineAdvFilter.aspx">
        <system.web>
          <authorization>
            <allow roles="Get-QuarantineMessage@R:Organization"/>
            <!-- Deny everyone else -->
            <deny users="*"/>
          </authorization>
        </system.web>
      </location>
      <location path="QuarantineDetails.aspx">
        <system.web>
          <authorization>
            <allow roles="Get-QuarantineMessage@R:Organization"/>
            <!-- Deny everyone else -->
            <deny users="*"/>
          </authorization>
        </system.web>
      </location>
      <location path="QuarantineSDO.aspx">
        <system.web>
          <authorization>
            <allow roles="Get-QuarantineMessage@R:Organization"/>
            <!-- Deny everyone else -->
            <deny users="*"/>
          </authorization>
        </system.web>
      </location>
      <location path="ReleaseQuarantine.aspx">
        <system.web>
          <authorization>
            <allow roles="Release-QuarantineMessage@R:Organization"/>
            <!-- Deny everyone else -->
            <deny users="*"/>
          </authorization>
        </system.web>
      </location>
    </configuration>
    Reference: https://social.technet.microsoft.com/Forums/zh-CN/74a108a8-21f3-4f5e-8fee-94942698797a/exchange-2013ecp500?forum=exchangeserverzhchs
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Hi,
    According to your description, I understand that open a shared mailbox and modify the setting of Outlook Voice Access by OWA, then return an error “500 unexpected error”.
    If I misunderstand your concern, please do not hesitate to let me know.
    Basis on my testing, run Enable-UMMailbox to enable UM feature for shared mailbox, and enable shared mailbox account in AD. Then login OWA to double check the setting of Voice mail, everything is OK.
    However, I get the same error as your mentioned when login another account in OWA and open shared mailbox to modify the setting of voice mail. Also, I get same error when doing this way to access another mailbox.
    I find an similar thread about your question, it may be caused by the license of shared mailbox. For your reference:
    http://community.office365.com/en-us/f/148/t/160652.aspx
    Best Regards,
    Allen Wang

  • Error when release account plan via CRM_ACC_PL

    Hi expert,
    Getting error 'Overlapping validity periods for two condition records' when release account plan via CRM_ACC_PL.
    Any idea what caused this error?
    Cheers.

    Hello,
    could you please check notes 1311405, 1067232, 1044090, 1041830.
    Hopefully they can help.
    Regards,
    Gerhard

  • Event Code Error when switching networks

    Although I am running a standalone version of P6 on my laptop, I continually receive event code errors when I switch between two networks.  This often happens when I need to switch from a client network to my mobile hotspot.  Or, if I'm away from laptop for any length of time and it 'goes to sleep' without having closed out of P6, when I return I will have an event code error that requires me to close and then restart P6.
    I'm running Windows 7 SP1, Firefox 24.0, P6 Release 7.0.0 (Build 00000092)
    Any help is greatly appreciated.

    Hi,
    In regards to the problem when the computer goes to sleep, if you look in the event viewer you will see that Windows is dropping the network connection - not sure of any other workaround to this than disabling the sleep/hibernate function.
    As for the problem when you switch between networks, other than making sure you log out before making the network switch the only thing I can think of would be to try and make sure the connection is using 'localhost' or possibly '127.0.0.1' instead - this is in the vague hope that these connections will hold true even when the network behind the scenes is changing (this also assumes SQL Server, changing this for an Oracle XE database would be a bit different)
    Good luck.
    Regards
    Alex

  • Error when switching between drafts: "The instruction at "0x009f6487" ...

    Running Contribute CS3 and get this error frequently when switching between documents in the Draft Console:
    The instruction at "0x009f6487" referenced memory at "0x06bd7a24". The memory could not be "read".
    Click on OK to terminate the program
    Click on Cancel to debug the program
    I do not get this error any other time. Only when editing multiple documents and switching between them. Clicking Save for Later on the toolbar, instead of clicking directly on the document in the Draft Console does not help.
    Any help or suggestions are much appreciated.

    Can you please try clearning the Contribute preferences?
    To Clear the preference, quit Contribute, and then delete the Contribute CS3 folder in C:\Documents and Settings\<user>\Local Settings\Application Data\Adobe\ and also run the following command " reg delete "HKCU\Software\Adobe\Contribute 4.1" /f " if you are using Contribute CS3. Reconnect to the site and try the same scenario.
    Note that, if you clear the preferences then no connection will be listed in Contribute, you need to recreate the connections. It will be like a fresh installation.

  • Error when switching clients in Awesome floating mode

    When on a tag in floating mode, if I use the Mod-j or Mod-k keybinding to switch clients, I get the following message:
    /usr/share/awesome/lib/awful/client.lua:827: attempt to index local 'colfact' (a nil value)
      The keybindings are defined as:
    awful.key({ modkey, }, "j",
    function()
    awful.client.focus.byidx( 1)
    if client.focus then client.focus:raise() end
    end),
    awful.key({ modkey, }, "k",
    function()
    awful.client.focus.byidx(-1)
    if client.focus then client.focus:raise() end
    end),
      Those keys work just fine in tiled tags; I only get this error on floating tags.
    Any ideas?
    Thanks!

    Hi,
    Chk out this thread ,
    Data Request remains in yellow status after RSAPO_CLOSE_TRANS_REQUEST
    Regards,
    Priya.

  • SmartView 11.1.2 error when having Accounts dimension in POV

    Hi all,
    I'm currently facing a strange problem, when using SmartView 11.1.2 with a HFM application. I have the same application with the same metadata once on a 9.3.3 server and once on a 11.1.2 server.
    When I connect to 9.3.3 select a grid and put the accounts dimension into POV everything works fine.
    When I do exactly the same on 11.1.2 i get the error: XML Load error: A semi colon character was expected
    Does anyone have an idea, what could be the cause of this problem and/or how to fix this?
    Thanks in advance,
    Markus

    Hi,
    thanks for your answers. From all I could find out from Oracle support, I'll have to wait until 11.1.2.1 is GA and then try again :-(
    Or will there be a patch for 11.1.2.0 as well?
    Best regards,
    Markus

  • Access error when changing Account data

    Several users with same role (inside sales) are getting same error (Access Denied - SBL-DAT-00278) when trying to change account owner info or converting a lead and associating it with an existing account.
    The roles and access profiles are correct and have not been changed. Could this be the result of specific field changes?
    Any ideas?
    Thanks

    You have implemented the BADI  HRXSS_PER_BEGDA which results in this error
      ESS scenario's will allow data creation/modification starting
      from a Default Start Date.  By default this Default Start Date
      is set to Today's date.  To further explain, when the Default
      Start Date is set to Today's date ESS User can create or
      change a data record valid starting from Today's date
      or future date.
      It is possible to customize this behaviour.  Business Add-in
      HRXSS_PER_BEGDA is available.  Parameters like molga, pernr,
      infty, subty and begda can be used in different combinations
      for customization.  For further informatio, please
      refer to IMG:
      Personnel Management -> Employee Self-service -> Own Data ->
      Change Default Start Date.
    Check your use case subtypes as well

  • Cluster errors when switching messagins resources

    Hi
    I have two nodes configured in the sun cluster and runninng sun messaging server
    1) cluster version
    root@bglbbpp1 # scinstall -pvv
    Sun Cluster 3.1u1 for Solaris 9 sparc
    2) bglbbpp2 / # scstat -g
    -- Resource Groups and Resources --
    Group Name Resources
    Resources: mstorebgl-rg mstorebgl-lh-res mstorebgl-hastp-res mstorebgl-msg-res
    -- Resource Groups --
    Group Name Node Name State
    Group: mstorebgl-rg bglbbpp1 Online
    Group: mstorebgl-rg bglbbpp2 Offline
    -- Resources --
    Resource Name Node Name State Status Message
    Resource: mstorebgl-lh-res bglbbpp1 Online Online - LogicalHostname online.
    Resource: mstorebgl-lh-res bglbbpp2 Offline Offline - LogicalHostname offline.
    Resource: mstorebgl-hastp-res bglbbpp1 Online Online
    Resource: mstorebgl-hastp-res bglbbpp2 Offline Offline
    Resource: mstorebgl-msg-res bglbbpp1 Online Online - Start succeeded.
    Resource: mstorebgl-msg-res bglbbpp2 Offline Offline - Stop Succeeded
    bglbbpp2/ #
    3) when i do scswitch to switch messaging resource from pp1 to pp2 I get below errors and it fails back to pp1.
    # scswitch -z -h bglbbpp2-a-fixed.dataone.in -g mstorebgl-rg
    scswitch: Resource group mstorebgl-rg failed to start on chosen node and may fail over to other node(s)
    /var/adm/messages on pp2
    bglbbpp2 Cluster.RGM.rgmd: [ID 707948 daemon.notice] launching method <hafoip_prenet_start> for resource <mstorebgl-lh-res>, resource group <mstorebgl-rg>, timeout <300> seconds
    bglbbpp2 Cluster.RGM.rgmd: [ID 736390 daemon.notice] method <hafoip_prenet_start> completed successfully for resource <mstorebgl-lh-res>, resource group <mstorebgl-rg>, time used: 0% of timeout <300 seconds>
    bglbbpp2 Cluster.RGM.rgmd: [ID 707948 daemon.notice] launching method <hastorageplus_prenet_start> for resource <mstorebgl-hastp-res>, resource group <mstorebgl-rg>, timeout <1800> seconds
    bglbbpp2 SC[SUNW.HAStoragePlus:2,mstorebgl-rg,mstorebgl-hastp-res,hastorageplus_prenet_start_private]: [ID 582276 daemon.warning] This node has a lower preference to node 1 for global service datadg associated with path /messaging. Device switchover can still be done to this node.
    bglbbpp2 SC[SUNW.HAStoragePlus:2,mstorebgl-rg,mstorebgl-hastp-res,hastorageplus_prenet_start_private]: [ID 582276 daemon.warning] This node has a lower preference to node 1 for global service datadg associated with path /MMP. Device switchover can still be done to this node.
    bglbbpp2 SC[SUNW.HAStoragePlus:2,mstorebgl-rg,mstorebgl-hastp-res,hastorageplus_prenet_start_private]: [ID 582276 daemon.warning] This node has a lower preference to node 1 for global service datadg associated with path /backup. Device switchover can still be done to this node.
    bglbbpp2 Cluster.Framework: [ID 801593 daemon.notice] stdout: becoming primary for datadg
    bglbbpp2 Cluster.RGM.rgmd: [ID 736390 daemon.notice] method <hastorageplus_prenet_start> completed successfully for resource <mstorebgl-hastp-res>, resource group <mstorebgl-rg>, time used: 0% of timeout <1800 seconds>
    bglbbpp2 Cluster.RGM.rgmd: [ID 707948 daemon.notice] launching method <hafoip_start> for resource <mstorebgl-lh-res>, resource group <mstorebgl-rg>, timeout <500> seconds

    bglbbpp2 Cluster.RGM.rgmd: [ID 736390 daemon.notice] method <hafoip_start> completed successfully for resource <mstorebgl-lh-res>, resource group <mstorebgl-rg>, time used: 0% of timeout <500 seconds>
    bglbbpp2 Cluster.RGM.rgmd: [ID 707948 daemon.notice] launching method <hastorageplus_start> for resource <mstorebgl-hastp-res>, resource group <mstorebgl-rg>, timeout <90> seconds
    bglbbpp2 Cluster.RGM.rgmd: [ID 707948 daemon.notice] launching method <hafoip_monitor_start> for resource <mstorebgl-lh-res>, resource group <mstorebgl-rg>, timeout <300> seconds
    bglbbpp2 Cluster.RGM.rgmd: [ID 736390 daemon.notice] method <hastorageplus_start> completed successfully for resource <mstorebgl-hastp-res>, resource group <mstorebgl-rg>, time used: 0% of timeout <90 seconds>
    bglbbpp2 Cluster.RGM.rgmd: [ID 707948 daemon.notice] launching method <hastorageplus_monitor_start> for resource <mstorebgl-hastp-res>, resource group <mstorebgl-rg>, timeout <90> seconds
    bglbbpp2 Cluster.RGM.rgmd: [ID 707948 daemon.notice] launching method <ims_svc_start> for resource <mstorebgl-msg-res>, resource group <mstorebgl-rg>, timeout <300> seconds
    bglbbpp2 Cluster.RGM.rgmd: [ID 736390 daemon.notice] method <hastorageplus_monitor_start> completed successfully for resource <mstorebgl-hastp-res>, resource group <mstorebgl-rg>, time used: 0% of timeout <90 seconds>
    bglbbpp2 Cluster.RGM.rgmd: [ID 736390 daemon.notice] method <hafoip_monitor_start> completed successfully for resource <mstorebgl-lh-res>, resource group <mstorebgl-rg>, time used: 0% of timeout <300 seconds>
    bglbbpp2 SC[SUNW.ims,mstorebgl-rg,mstorebgl-msg-res,ims_svc_start]: [ID 855581 daemon.error] Failed to get the configuration info
    bglbbpp2 Unable to initialize the MTA; compiled configuration version mismatch; recompile the configuration with imsimta cnbuild
    bglbbpp2 SC[SUNW.ims,mstorebgl-rg,mstorebgl-msg-res,ims_svc_start]: [ID 450358 daemon.error] Error retrieving services from iMS configuration
    bglbbpp2 Cluster.RGM.rgmd: [ID 938318 daemon.error] Method <ims_svc_start> failed on resource <mstorebgl-msg-res> in resource group <mstorebgl-rg> [exit code <1>, time used: 0% of timeout <300 seconds>]
    bglbbpp2n Cluster.RGM.rgmd: [ID 707948 daemon.notice] launching method <hafoip_monitor_stop> for resource <mstorebgl-lh-res>, resource group <mstorebgl-rg>, timeout <300> seconds
    bglbbpp2 Cluster.RGM.rgmd: [ID 707948 daemon.notice] launching method <hastorageplus_monitor_stop> for resource <mstorebgl-hastp-res>, resource group <mstorebgl-rg>, timeout <90> seconds
    bglbbpp2 Cluster.RGM.rgmd: [ID 707948 daemon.notice] launching method <ims_svc_stop> for resource <mstorebgl-msg-res>, resource group <mstorebgl-rg>, timeout <300> seconds
    bglbbpp2 Cluster.RGM.rgmd: [ID 736390 daemon.notice] method <hastorageplus_monitor_stop> completed successfully for resource <mstorebgl-hastp-res>, resource group <mstorebgl-rg>, time used: 0% of timeout <90 seconds>
    bglbbpp2 Cluster.RGM.rgmd: [ID 736390 daemon.notice] method <hafoip_monitor_stop> completed successfully for resource <mstorebgl-lh-res>, resource group <mstorebgl-rg>, time used: 0% of timeout <300 seconds>
    bglbbpp2 Cluster.RGM.rgmd: [ID 736390 daemon.notice] method <ims_svc_stop> completed successfully for resource <mstorebgl-msg-res>, resource group <mstorebgl-rg>, time used: 0% of timeout <300 seconds>
    bglbbpp2 Cluster.RGM.rgmd: [ID 707948 daemon.notice] launching method <hastorageplus_stop> for resource <mstorebgl-hastp-res>, resource group <mstorebgl-rg>, timeout <1800> seconds
    bglbbpp2 Cluster.RGM.rgmd: [ID 736390 daemon.notice] method <hastorageplus_stop> completed successfully for resource <mstorebgl-hastp-res>, resource group <mstorebgl-rg>, time used: 0% of timeout <1800 seconds>
    bglbbpp2 Cluster.RGM.rgmd: [ID 707948 daemon.notice] launching method <hafoip_stop> for resource <mstorebgl-lh-res>, resource group <mstorebgl-rg>, timeout <300> seconds
    bglbbpp2 ip: [ID 683231 kern.notice] TCP_IOC_ABORT_CONN: local = 010.016.018.026:0, remote = 000.000.000.000:0, start = -2, end = 6
    bglbbpp2 ip: [ID 440816 kern.notice] TCP_IOC_ABORT_CONN: aborted 0 connection
    bglbbpp2 Cluster.RGM.rgmd: [ID 736390 daemon.notice] method <hafoip_stop> completed successfully for resource <mstorebgl-lh-res>, resource group <mstorebgl-rg>, time used: 0% of timeout <300 seconds>
    bglbbpp2 Cluster.RGM.rgmd: [ID 707948 daemon.notice] launching method <hastorageplus_postnet_stop> for resource <mstorebgl-hastp-res>, resource group <mstorebgl-rg>, timeout <1800> seconds
    bglbbpp2 Cluster.RGM.rgmd: [ID 736390 daemon.notice] method <hastorageplus_postnet_stop> completed successfully for resource <mstorebgl-hastp-res>, resource group <mstorebgl-rg>, time used: 0% of timeout <1800 seconds>
    bglbbpp2 Cluster.Framework: [ID 801593 daemon.notice] stdout: no longer primary for datadg
    Please advice throw some lights where is something going wrong.
    thanks

  • Swinstsvrui error when switching on N95 8GB

    When I switch on my phone (N95 8GB), an application starts to run automatically. Then it says "cannot install the file found on the mass memory". However, this message does not appear when I close Swinstsvrui.exe at startup.
    When I look at the mass memory, I cannot find relevant files.
    Does anybody know how to kill this error message?

    Additionally, I want to mention here that I don't want to reinstall the Symbian software.
    Please inform me if you have a solution.

  • Error when switching from flash to webdynpro compiler

    Hi,
    Deploying a VC application in flash works fine, but when I change the compiler to webdynpro I get the following error:
    The initial exception that caused the request to fail, was:
       com.sap.tc.wd4vc.intapi.info.exception.WD4VCRuntimeException: No parser configuration entry for the tag HtmlView
        at com.sap.tc.wd4vc.xglengine.java.XGLParser.getConfigEntryForParser(XGLParser.java:269)
        at com.sap.tc.wd4vc.xglengine.java.XGLParser.parseTag(XGLParser.java:298)
        at com.sap.tc.wd4vc.xglengine.java.XGLParser.parseContainersInternal(XGLParser.java:192)
        at com.sap.tc.wd4vc.xglengine.java.XGLParser.parseContainersInternal(XGLParser.java:143)
        at com.sap.tc.wd4vc.xglengine.java.XGLParser.parseContainersInternal(XGLParser.java:199)
        ... 72 more
    What do I have to change to make it work?

    Hi Peter,
    7.1 is much more suitable for what you're trying to do. VC 7.0 does not support SOA services, since it doesn't support complex and clustered services. I highly recommend using VC for CE. We have a ramp up for 7.1.1 (EhP1 for 7.1) which is much better than 7.1 alone. Please let me know if you want to get some more info about joining the ramp up and I'll connect you with the right people.
    Best regards,
    Natty

Maybe you are looking for