Error when test or export to quicktime

I've had cs3 for a few months now and all of a sudden when I
go to test movie or export to quiktime I get an error message and
flash shutsdown.
"Adobe Flash CS3 has encountered a problem and needs to
close. We are sorry for the inconvenience."
I can still export to avi. Anyone know what the problem
is?

Did you ever get an answer to this problem?

Similar Messages

Error when trying to export excel from Chrom

Hi,
I get the following error message when i try to export the excel from Chrome browser. Has anyone encountered this error when trying to export from Chrome ? can you please give me the solution.
Thanks.
Error message:
To export a list, you must have a Microsoft SharePoint Foundation-compatible application

Hi,
From your description, when you export a SharePoint list to excel from chrome, you get an error.
In my SharePoint 2013, when I export a SharePoint list to excel from chrome, it works fine.
For your issue, make sure the excel client have been installed in your environment.
To narrow down the issue, I would like to confirm the following information:
To check whether the issue is related to the browser, I suggest you to do a test in other browsers, such as IE and compare the results.
What version is your office client? office 2013 or 2010? 32bit or 64 bit?
Besides, here are some similar posts, you can take a look at:
http://community.office365.com/en-us/f/172/t/160015.aspx
https://social.technet.microsoft.com/Forums/office/en-US/5ffbeb9e-6eb1-41c2-8141-edab6039bbde/to-export-a-list-you-must-have-a-microsoft-sharepoint-foundationcompatible-application?forum=sharepointadminprevious
I am looking forward to your reply back.
Best regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Spectrum digital DSK5416 driver setup gives an error when test wizard is run.

Please help us with the following problem we are facing:
1.   Spectrum digital DSK5416 driver setup gives an
error when test wizard is run. A snap shot of the same has been
attached.
2.   The A/D module doesn’t pickup microphone signal or
an audio sample for loopback but the implementation of the same works
fine in CCS environment. (We are using Mic In and Speaker Out lines)
3.   When a real-time application has run successfully
and if you close the VAB environment the application starts running
automatically until you reset the board.
4.   We don’t find the flash program button enabled, so
that any real-time program can be burned into flash and demonstrate the
embedded feature.
Note:
We are using Windows Xp professional edition.
Program is developed using DSK5416

Hello, I have included some information that will help address your questions: (1) I couldn't see the attached image file (contained errors). The RIDE/VAB DSK5416 Driver makes use of a JTAG communication when reading/writing memory on the DSK5416 hardware. You will need to make sure that the JTAG transfer option has been selected in the Driver Setup dialog box. The memory test process may seem to take a long time due to the amount of memory being accessed. (2) The VAB RTDSKAD block component provides a one-channel A/D input that makes use of the line-in channel on the DSK5416 hardware. (3) VAB does not remove the downloaded DSP executable program from DSK5416 memory, and it does remain resident. That being said, I wouldn't expect that the program would begin execution when VAB is closed. I would recommend that you verify that the DSP program stopped properly upon selecting the VAB Stop command. Then, close VAB as normal. (4) The RIDE/VAB driver for the DSK5416 does not support programming of flash memory on the DSK5416 hardware. Regards, Steve

Error when testing from Message mapping test tab

Hi Experts,
I am wondering that when i test the message in the MM test tab its giving error and target message is not generating. I am not testing end to end then why it is triggering communication channel?
I can see that the 'RFC_Alert_Service_RFC_Receive' communication channel is in Red color RWB--> communication channel monitoring. I even even refreshed the cache and also activated the RFC channel but no use.
Below are the error details:
Error when testing message from test tab of mapping -->
java.lang.RuntimeException: Exception during processing the payload.Problem when calling an adapter by using communication channel RFC_Alert_Service_RFC_Receiver (Party: , Service: RFC_Alert_Service, XI AF API call failed. Module exception: 'error while processing the request to rfc-client: com.sap.aii.af.rfc.afcommunication.RfcAFWException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing
Error in Communication channel monitoring -->
Receiver channel 'RFC_Alert_Service_RFC_Receiver' for party '', service 'RFC_Alert_Service'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Password logon no longer possible - too many failed attempts.
Please help me how can i resolve this issue to successfully test the message in mapping-test tab.
Regards,
Suresh.

> Error in Communication channel monitoring -->
> Receiver channel 'RFC_Alert_Service_RFC_Receiver' for party '', service 'RFC_Alert_Service'
> Error can not instantiate RfcPool caused by:
> com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Password logon no longer possible - too many failed attempts.
Unlock the user you are using in the RFC channel and provide the correct password in the channel configuration. Once the channel error is resolved you would be able to test the Mapping sucessfully...
>>why it is triggering communication channel?
You would be using RFC lookup in the mapping....
~SaNv...
Edited by: Santhosh Kumar V on Jul 8, 2009 5:48 PM

Error in transporting ODS(Error when creating the export DataSource.......)

Hi All,
 When I try to transport ODS from dev to quality i m getting the following error.
DataSource 8XADDR1 does not exist in source system BQ1CLNT355 of version A
Error when creating the export DataSource and dependent Objects
Error when activating ODS Object XADDR1

 XADDR1 is my ODS. BQ1CLNT355 is myself source system. When i checked the connection in the source system tab in Quality,it is ok.
Please Suggest solution,if any body encountered same problem. It is very urgent for me.
Regards,
Ramana.

Hi
You generate export datasource once again
Replicate your source system in qual and then try to transport the ODS and the datamart object 8ODS ....
Hope this helps
Reg
N Ganesh
assign points if useful***

Error when trying to Export

Hi all,
I'm getting a javascript error, when trying to export. (i.e. "Deployment Management" -> "Export").
When I click on this link, a popup window is appearing. But, on that window, a javascript error occures. Nothing display on that window. (empty).
JavaScript error is :
Line : 207
Char : 5
Error : 'ls' is undefined
Code : 0
URL : http://<ip_address>/xlWebApp/DeploymentManager/loadDU.do?method=displayExport
Line : 30
Char : 6
Error : Object expected
Code : 0
URL : http://<ip_address>/xlWebApp/DeploymentManager/loadDU.do?method=displayExport
IE version : 7
This is OIM Fresh installation. I did not do any modification on this yet.
Regards,
Chaturanga
Edited by: chaturanga on Aug 9, 2009 12:04 PM

Hi Martin,
We are using OAM also. So, It might cause these errors. We will try to Install it from the beginning....
Thanks....
But, I have another issue.
1) We put our new changes by running patch_jboss.cmd file. After doing this, if we run xlStartServer.bat on <OIM_HOME>\bin directory, we can see all the changes.
But, if we start jBoss using <JBoss>\bin\run.bat file, we can not see any changes. I try to clear cache using PurgeCache.bat file. But, it is still not working....
2) When we start Jboss using xlStartServer.bat file, loggs are not written into <JBOSS>\server\default\log\server.log file. I try to configure using best practice guide. But, it is still not working...If I start JBoss using run.bat file on jboss, it writes loggs to server.log file..
3) Earlier, when we are doing development, we did not use OAM server to connecto to web site. So, for some customizations, I get the current user's userLogin from
<bean:define id="userLogin" name = "userMemberOfForm" property="userID" type="java.lang.String"/>..This works fine..
But, since we are going to use OAM or Windows authentication to connect to OIM web in live, it returns null or empty for "userLogin"....(if we use the above code)...How can I get the userLogin of the current login user....???
Regards,
Chaturanga

Login error when trying to Export

Hi
I receive an error when trying to export to Word.
The message is simple "An error occurred when signing in", not very useful.
I have reset my password several times and have obviously been able to login here with the same account.
OS Win XP
Browser Firefox 19
Reader 10
Can anyone suggest anything else?
TC

We are outside our 30 days!
YOUR PACKAGE SUDDENLY STOPPED WORKING.
AT YOUR STAFF SUGGESTION I UPGRADED READER AND IT IS NOW TRYING TO GET ME TO UPGRADE IE TO 8.
PRODUCT SUPPORT?
I DON'T THINK SO!!!!!
CUSTOMER SERVICE?
I DON'T THINK SO!!!!!
Thanks for nothing.

Why is Premiere getting an error when trying to export .MXF files?

Hello!
I have a video that I need to submit to DMDS and it must be a .mxf file. This is the first time I've ever had to export a .mxf so I am not too familiar with the type. I have been exporting every other type of file for years and never had an issue (H.264, quicktime, etc.). However, when I try exporting .mxf I get the generic rendering error which then stops the export.
The first time I tried, the video was down to 12 minutes left (after about 2 and a half hours) when I got the error.
The next time, it crashed right away with over 2 hours still remaining.
So it does not seem to be a corrupt clip because: A) I've been rendering this video out as other file types for rough previews, drafts, etc and it's worked fine and B) The 2 crash times were on opposite ends of the spectrum.
I am running an iMac with OSX 10.7.5, 3.06 Ghz Intel Core 2 Duo with 8GB ram...I am using Premiere Pro Version 6.0.0
I do have Third Party plug ins installed but have never had an issue exporting in the past, only with this .mxf file.
Thanks in advance for any and all help!

If you have GPU accelertation enabled in Premiere Pro, try switching to Software Only.
Are you queuing the job to AME or clicking "Export" in the Export Settings dialog (which encodes directly through Premiere)? Whichever path you're going down, try the other one.
I'd also keep an eye on your resource usage, especially RAM, while encoding in progress. With 8GB of RAM, I'd be surprised if that were the problem.
Lastly, if you're encoding through AME, then you might want to post on that product's forum: http://forums.adobe.com/community/ame

Error when trying to export as Flash

I'm attempting to export my very small test project as Flash, but two errors occur:
1. Adobe Encore has encountered an error. [..\..\src\AMEEncoder.cpp-2359]
There is only a "Continue" button to click, so I click it and the Build Progress bar finishes and states "Completed". I then click "OK" and get this second error:
2. "An input contract violation has occurred!"
There is only an "OK" button to click, so I click it and that's it.
I try to play the swf or index.html that was created and though the Flash build opens to my main menu, complete with correct navigation and highlights states, their respective videos do not playback when selected from the menu. Only a blank black screen appears. If I click Pause or Play respectively, nothing changes, but I can select the "Next" button and it initiates my set end action for that clip and correctly returns me to the main menu. So, some of the settings stick, but video playback does not.
Some other info about this Encore project:
From Premiere Pro CS3, I used the "Export to Encore" export option. I selected "Author With Menus", and changed my Encoding Settings to a custom setting of:
NTSC, 720x480, 29.97 drop frame [fps], Progressive, Quality 5.0
192 [kbps], 48kHz, 16 bit, Stereo, MPEG
CBR, 9.00 [Mbps]
It successfully encoded without error and opened Encore and such.
Hope I have provided enough info...

Hey Neil,
Thanks for replying. When I author DVD's, I use the basic encoding standards you listed above.
In this case, since the output is not written media, I was encoding in a way that would give me the best possible results (in theory at least) when planning on flv being the final encoded output, where lowest possible file size with best possible quality is the goal (since it's home will be on the web, not a DVD).
As for my issue with the errors generated from the Export to Flash option, I have learned some things, and was able to successfully Export to Flash.
One thing is that apparently the Flash encoder that EncoreDVD CS3 uses is not the same as the Adobe Flash CS3 Video Encoder or whatever Flash encoding engine Premiere uses. Encore's Flash output settings are limited, and so are the results.
What I had to do was export my PP CS3 projects to Flash using Adobe Media Encoder and update the XML that Encore spits out accordingly to point to my newly encoded flv's, replacing the flv's that Encore created... not a big deal, but one extra step and little more waiting time.
Now, the results are stunning! And since I'm not comfortable in Flash CS3 or coding ActionScript, having Encore create the menu interface, with all the navigation and interactivity and such, for me was a big BIG plus!

Error when trying to export to wmv

i keep getting an error when i try to export my movie to wmv. is anyone else having that problem?

The flip4mac update doesn't appear to solve the problem exporting from iMovie 08. I have updated both iMovie and the flip4mac exporter plug in and still cannot export from within iMovie - it comes up with said error. I have to export to a *.mov file first, and then open that file in quicktime, then export to *.wmv from within quicktime itself. Perhaps using VisualHub would be cheaper (and faster).

Error when testing BSP application in SE80

Hi Experts,
When i try to test the connection in se80 and SICF, I am getting the below error, Could you please help me to fix this.
(Server: Netweaver CRM, windows, MSSQL)
Error when processing your request
What has happened?
The URL http://sap0206.sap.xxxxx.com:8002/sap/bc/bsp/sap/crm_ic/auiitems.do was not called due to an error.
Note
The following error text was processed in the system C02 : Access via 'NULL' object reference not possible.
The error occurred on the application server SAP0206_C02_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: DO_PREPARE_OUTPUT of program CL_CRM_IC_AUIITEMS_IMPL=======CP
Method: DO_REQUEST of program CL_BSP_WD_VIEW_CONTROLLER=====CP
Method: DO_REQUEST of program CL_BSP_CTRL_ADAPTER===========CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_BSP===============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system C02 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server SAP0206_C02_02 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server SAP0206_C02_02 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 300 -u: SAPTCC -l: E -s: C02 -i: SAP0206_C02_02 -w: 0 -d: 20110412 -t: 142205 -v: RABAX_STATE -e: OBJECTS_OBJREF_NOT_ASSIGNED
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

Hi,
Please, post runtime error from ST22.
Best Regards,
Aleh

Using SSRS local mode, receive invalid token error when trying to export the report when running in worker thread

We're using ASP.net with .Net 4, developing with Visual Studio 2012. We use SSRS 2012sp1 with local reports, so exporting the report ourselves instead of using a reportviewer control (and not using the SQL Reporting service). The reports are
executing fine when we export the report in the main thread, but if we spawn a worker thread and run a report there we receive the following error when calling Render():
Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Failed to load expression host assembly. Details: Invalid token for impersonation - it cannot be duplicated.
We only receive this when running a report that uses expressions on a separate thread. I've tried running the application pool under all the default built-in accounts (NetworkService, etc), and under admin user accounts to no avail.
This didn't occur with the previous version of our application which used .net 3.5.

As mentioned, we are not using the Reportviewer control, we are rendering locally. Not certain if that would make a difference.
Also, I had tried using all the built-in accounts. Just for kicks I changed it to LocalSystem again, then reset IIS (see image below). I then tried to export the report in a worker thread and received the same error.
Here is the text from the exception:
Microsoft.Reporting.WebForms.LocalProcessingException: An error occurred during local report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Failed to load expression host assembly. Details: Invalid token for impersonation - it cannot be duplicated.
at Microsoft.ReportingServices.RdlExpressions.ReportRuntime.ProcessLoadingExprHostException(ObjectType assemblyHolderObjectType, Exception e, ProcessingErrorCode errorCode)
at Microsoft.ReportingServices.RdlExpressions.ReportRuntime.LoadCompiledCode(IExpressionHostAssemblyHolder expressionHostAssemblyHolder, Boolean includeParameters, Boolean parametersOnly, ObjectModelImpl reportObjectModel, ReportRuntimeSetup runtimeSetup)
at Microsoft.ReportingServices.OnDemandProcessing.Merge.Init(Boolean includeParameters, Boolean parametersOnly)
at Microsoft.ReportingServices.OnDemandProcessing.Merge.Init(ParameterInfoCollection parameters)
at Microsoft.ReportingServices.ReportProcessing.Execution.ProcessReportOdp.CreateReportInstance(OnDemandProcessingContext odpContext, OnDemandMetadata odpMetadata, ReportSnapshot reportSnapshot, Merge& odpMerge)
at Microsoft.ReportingServices.ReportProcessing.Execution.ProcessReportOdp.Execute(OnDemandProcessingContext& odpContext)
at Microsoft.ReportingServices.ReportProcessing.Execution.RenderReportOdpInitial.ProcessReport(ProcessingErrorContext errorContext, ExecutionLogContext executionLogContext, UserProfileState& userProfileState)
at Microsoft.ReportingServices.ReportProcessing.Execution.RenderReport.Execute(IRenderingExtension newRenderer)
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderReport(IRenderingExtension newRenderer, DateTime executionTimeStamp, ProcessingContext pc, RenderingContext rc, IChunkFactory yukonCompiledDefinition)
at Microsoft.Reporting.LocalService.CreateSnapshotAndRender(ReportProcessing repProc, IRenderingExtension renderer, ProcessingContext pc, RenderingContext rc, SubreportCallbackHandler subreportHandler, ParameterInfoCollection parameters, DatasourceCredentialsCollection credentials)
at Microsoft.Reporting.LocalService.Render(String format, String deviceInfo, String paginationMode, Boolean allowInternalRenderers, IEnumerable dataSources, CreateAndRegisterStream createStreamCallback)
at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, PageCountMode pageCountMode, CreateAndRegisterStream createStreamCallback, Warning[]& warnings)
--- End of inner exception stack trace ---
at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, PageCountMode pageCountMode, CreateAndRegisterStream createStreamCallback, Warning[]& warnings)
at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, PageCountMode pageCountMode, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
at Microsoft.Reporting.WebForms.LocalReport.Render(String format, String deviceInfo, PageCountMode pageCountMode, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
at Microsoft.Reporting.WebForms.Report.Render(String format, String deviceInfo, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
at IxSS.Infolinx.Report.MicrosoftInfolinxReport.ExportReport(String strFileFullyQualifiedPath, String strExportType, String strFilterDesc, Dictionary`2 extraParams, String area)
at IxSS.Infolinx.Report.MicrosoftInfolinxReport.ExportReport(String strFileFullyQualifiedPath, String strExportType, String strFilterDesc, Dictionary`2 extraParams)

Error when test a Web service

Hi all,
I am trying to create a web service for RFC Function module. I ceated the web service, now I want to test this Web service. I have the URL of WSDL file, but when I execute the URL, it doesn't display.
Can you please suggest me what will be the reason for this error?
Thanks
Sanket sethi

Please find below the steps to create and test web services.
Please follow up these steps and you would not get any error in testing web services.
Hope this would help you.
1. Go to SICF and activate this webservice: u201C/sap/bc/srt/rfc/sap/QUERY_VIEW_DATAu201D
2. Go to transaction WSCONFIG andenter service destination u201CQUERY_VIEW_DATAu201D and enter variant u201Cquery_view_datau201D and hit
enter. Currently, there are no released services so create a new service.
3. Choose Save to release this web service.
4. Choose ICF Details -> External Aliases
5. Choose u201CNewu201D to create a new external alias.
6. Enter external alias u201C/sap/bw/xml/soap/queryviewu201D and enter description u201CSAP BI Web Service u2013 XML Result Setu201D
7. Specify your security and user ID on the u201CLogon datau201D tab.
8. Specify u201C/sap/bc/srt/rfc/sap/QUERY_VIEW_DATAu201D under the u201CTrg Elementu201D tab.
9. Save your external alias.
10. Go to transaction WSADMIN -> Goto -> Administration Settings. Ensure that the path to your J2EE is specified here and save this.
11. Find your web service and choose the u201CWeb service homepageu201D
12. Login to your ABAP system from the Web Service Navigator
13. Choose Test -> GetQueryViewData to test this service.
14. Enter and Infoprovider and Query and send the request to test this web service. Note: If the query has mandatory variables, those must be passed in the parameter. For the sake of this test, use a query without variables.
15. Ensure the request and response are successful.
16. If you have issues, make sure you activate your Web Service and Interface in SE80.
17. Here is an example of how to pass parameters for filter values using WEB API commands. We are passingtheFILTER_IOBJNM=0D_CHANNEL and FILTER_VALUE=3.
18. Here is an example of how to pass parameters for variable values using WEB API commands. In this case, we are using a selection option variable. We are passing the following parameters:
VAR_NAME_1=DISTGOP
VAR_OPERATOR_1=EQ
VAR_VALUE_LOW_EXT_1=3
VAR_VALUE_HIGH_EXT_1=5

Jdeveloper error when testing a web service

Hi,
I keep getting the error below when testing a webservice, I have unistalled and reinstalled jdeveloper but still getting this error, help would be gratefully appreciated?
[Waiting for the domain to finish building...]
[10:58:59 AM] Creating Integrated Weblogic domain...
[10:59:54 AM] Extending Integrated Weblogic domain...
[11:00:39 AM] Integrated Weblogic domain processing completed successfully.
*** Using port 7101 ***
C:\Users\claire\AppData\Roaming\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
\Java\jre6\lib\ext\QTJava.zip was unexpected at this time.
Process exited.

http://forums.oracle.com/forums/search.jspa?objID=f83&q=QTJava.zip

Error when testing ADS service method rpdata from Portal

Dear All,
We have configured ADS in our portal system and at the same time in the respective ERP system also.
previously, like just before 2 days it worked fine. But now it is throwing an excpetion when testing the ADS service using the test option of ADS service.
We are usign ADSUSER to test the rpdata method.
Our landscape is NW2004s (EPDIAS Java), BAckend is ECC5.0.
Error we are getting on portal side is:
User ADSUSER does not have access to method rpData.
Error we are getting on ERP side when try to see printpreview of test form:
Adobe document services error: SOAP Runtime Exception: CSoapExceptionFault : SOAP (100102)
We have tested the FC destination on ERP system, and the destinations maintained on Viosual Administrator also.
Please do the needful,
Your help will be appreciated.
Thanks in advance,
Regards,
Sireesha.

Hi Preetha,
Thanks for reply.
as per note 944221we have checked our configuration its look like every thing ok
but error was same
so we I have activated trace, here is the corresponding details
1.5#00300580ABE600520000B4BC00001038000430184A8E73A6#1178780795046#com.sap.engine.services.ejb#com.adobe/AdobeDocumentServices#com.sap.engine.services.ejb#ADSUSER#7474####fd104a70fec411dbcdd100300580abe6#SAPEngine_Application_Thread[impl:3]_49##0#0#Error##Java###
[EXCEPTION]
#1#com.sap.engine.services.ejb.exceptions.BaseEJBException: User ADSUSER does not have access to method rpData.
 at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:74)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
 at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157)
 at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79)
 at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
 at SoapServlet.doPost(SoapServlet.java:51)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: Caller not authorized.
 at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:608)
 at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:505)
 at com.sap.engine.services.security.resource.ResourceContextImpl.checkPermission(ResourceContextImpl.java:45)
 at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:72)
 ... 25 more
com.sap.engine.services.security.exceptions.BaseSecurityException: Caller not authorized.
 at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:608)
 at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:505)
 at com.sap.engine.services.security.resource.ResourceContextImpl.checkPermission(ResourceContextImpl.java:45)
 at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:72)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
 at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157)
 at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79)
 at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
 at SoapServlet.doPost(SoapServlet.java:51)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Please do the needful.
Regards,
Sireesha

Error when test or export to quicktime

Similar Messages

Maybe you are looking for