Error when testing from Message mapping test tab

Hi Experts,
I am wondering that when i test the message in the MM test tab its giving error and target message is not generating. I am not testing end to end then why it is triggering communication channel?
I can see that the 'RFC_Alert_Service_RFC_Receive' communication channel is in Red color RWB--> communication channel monitoring. I even even refreshed the cache and also activated the RFC channel but no use.
Below are the error details:
Error when testing message from test tab of mapping -->
java.lang.RuntimeException: Exception during processing the payload.Problem when calling an adapter by using communication channel RFC_Alert_Service_RFC_Receiver (Party: , Service: RFC_Alert_Service, XI AF API call failed. Module exception: 'error while processing the request to rfc-client: com.sap.aii.af.rfc.afcommunication.RfcAFWException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing
Error in Communication channel monitoring -->
Receiver channel 'RFC_Alert_Service_RFC_Receiver' for party '', service 'RFC_Alert_Service'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Password logon no longer possible - too many failed attempts.
Please help me how can i resolve this issue to successfully test the message in mapping-test tab.
Regards,
Suresh.

> Error in Communication channel monitoring -->
> Receiver channel 'RFC_Alert_Service_RFC_Receiver' for party '', service 'RFC_Alert_Service'
> Error can not instantiate RfcPool caused by:
> com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Password logon no longer possible - too many failed attempts.
Unlock the user you are using in the RFC channel and provide the correct password in the channel configuration. Once the channel error is resolved you would be able to test the Mapping sucessfully...
>>why it is triggering communication channel?
You would be using RFC lookup in the mapping....
~SaNv...
Edited by: Santhosh Kumar V on Jul 8, 2009 5:48 PM

Similar Messages

Unable to test in message mapping test tab

hi all,
below is my message mapping test tab structure
and my xml file looks like below
I am unable to test this data in test tab of message mapping and my source structure becomes red

Hi Hareesh,
I tried what you said but not working

Error when booting from Apple Hardware Test (AHT) CD

Just downloaded AHT 1.2.6 from here for my 2nd-hand Power Mac.
Burned it to CD with Disk Utility on my iBook, booted from it on the Power Mac, and received the following message after the "loading..." splash screen:
invalid memory access at %SRR0: 00034870 %SRR1: 00003030
This left me at a command prompt, from which I chose to shut down the Mac.
My Mac version is PowerMac3,6 4.4.7f1. Is this error down to using an incorrect AHT CD, or something fundamentally wrong with my RAM? I did test my RAM after purchase with Rember and possibly also with Tech Tool Pro 4.5.3 - no errors reported then.
SiR G.
EDIT: The Power Mac now has its original graphics card installed, not the ATI Radeon 9800 Pro; however, it still has the Sonnet card in place as the boot disk runs from this.
Message was edited by: SiRGadaBout

Hi,
You have the same problem as I, but I also noticed your firmware is a little off. The absolute last firmware update should have given you: "4.4.8f2". Here, have a look at mine.
Machine Name: Power Mac G4
Machine Model: PowerMac3,6
CPU Type: PowerPC G4 (3.3)
Number Of CPUs: 2
CPU Speed: 1.25 GHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 2 MB
Memory: 2 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.4.8f2
Yeah, I get the same problem as well with the AHT CD, strange as it seems. I tried removing DDR chips one at a time to find the culprit. It seems that I have been unable to figure out why it goes to the open firmware command line and prints: invalid memory access at %SRR0:00034870 %SRR1: 00003030. I ran memtestosx with applejack and although it took hours for it to complete, it gave me fantastic reports of all my memory functioning normally. I do notice the following with my memory:
Size: 512 MB
Type: DDR SDRAM
Speed: PC2600U-25330
Status: OK
DIMM1/J22:
Size: 512 MB
Type: DDR SDRAM
Speed: PC2600U-30330
Status: OK
DIMM2/J23:
Size: 512 MB
Type: DDR SDRAM
Speed: PC2600U-30330
Status: OK
DIMM3/J20:
Size: 512 MB
Type: DDR SDRAM
Speed: PC2600U-30330
Status: OK
**NOTICE that one of my memory sticks is PC2600U-25330, and the rest are PC2600U-30330. Could it be that one of my memory sticks in PC3200 memory and all the rest are PC2700? Help!

Obips analysis is undefined error when navigate from a map

On dashboad, the navigation from map to another report by using action works well when both table view and map view on dashboard. However, I get error "obips analysis is undefined" if I only show map view on the dashboard. Anybody know why?
Thanks

One more information about this error:
If I run this analysis without table view, it will not work. But if I click action link when the map view is under Results tab, it works even without table view. Have no idea about this.
Thanks

Test XML file and Message Mapping test tab not compatible

Hi all,
I need help in testing in message mapping test tab.
I have a xml data taken from SXMB_MONI which looks lik below
&?xml version='1.0' encoding='UTF-8'?>
-&ns0:MT_Order xmlns:ns0="http://test.com/xi/test">
-<Header>
      <fld1>
      <fld2>
    -<Line>
        <line1>
and in message mapping multimapping is used,so it looks like
ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
      <ns1:KVNR_Senden_MT xmlns:ns1="urn:lsv.de/SENDER">
         <Inhalt>
            <KE/>
            <VF/>
            <BBNRAB/>
            <BBNREP/>
how can test this xml in message mapping test tab?please don't consider the structure .I don't have them.So,i have pasted some dummy structure

Try like this,
ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
<&ns1:MT_Order xmlns:ns0="http://test.com/xi/test">
<Header>
      <fld1>
      <fld2>
    -<Line>
        <line1>

In message mapping testing i'm getting this Error

hi,
in message mapping testing i'm getting this error.. can u plz explain what is this error.. and how can i solve this error..
12:27:47 Start of test
Source code has syntax error: D:/usr/sap/XID/DVEBMGS10/j2ee/cluster/server0/./temp/classpath_resolver/Mapf3292850763411dcbfab0013726698e1/source/com/sap/xi/tf/_TRNG_TEST_4_IM_RECEIVERS_.java:72: illegal start of expression </textarea> ^ D:/usr/sap/XID/DVEBMGS10/j2ee/cluster/server0/./temp/classpath_resolver/Mapf3292850763411dcbfab0013726698e1/source/com/sap/xi/tf/_TRNG_TEST_4_IM_RECEIVERS_.java:73: ';' expected } ^ 2 errors Source code has syntax error: D:/usr/sap/XID/DVEBMGS10/j2ee/cluster/server0/./temp/classpath_resolver/Mapf3292850763411dcbfab0013726698e1/source/com/sap/xi/tf/_TRNG_TEST_4_IM_RECEIVERS_.java:72: illegal start of expression </textarea> ^ D:/usr/sap/XID/DVEBMGS10/j2ee/cluster/server0/./temp/classpath_resolver/Mapf3292850763411dcbfab0013726698e1/source/com/sap/xi/tf/_TRNG_TEST_4_IM_RECEIVERS_.java:73: ';' expected } ^ 2 errors
12:27:48 End of test
thanks
Babu

BABU,
In your message mapping correct the UDF code.
There is a problem in your textarea and you have missed to place semi colon ";".
Regards,
Sarvesh

Get source FileName - RuntimeException during test of Message Mapping

Hi,
Inside a graphical mapping, I want to get the source file name, and then use it.
For that I use Michal's post inside a UdF: The specified item was not found.
And that works perfectly during the treatment (File -> Mapping -> IDoc)...
But my problem is when I try to test my Message Mapping inside the I.R (see tab "Test"), I have a RuntimeException due to the fact that DynamicConfiguration does not exist (obviously!) in the SOAP.
So I tryed to encapsulate the line "String ourSourceFileName = conf.get(key);" by a try/catch or by using the method "containsKey", but I have always the same RuntimeException...
is there someone who know how to catch this exception ?
Regards
Mickael
Note: JavaDoc is: http://help.sap.com/javadocs/NW04S/current/pi/com/sap/aii/mapping/api/DynamicConfigurationKey.html

Hi Progirl
yes... but it will be not really pratical for the maintenance to think everytimes that this "error" is not an error and to think to delete the link in order to realize a test and then to not forget to add (again) this link.
the risk is too important.
Hi Varun,
yes... but with the Test of Interface Mapping, I don't have the possibilty to see the Queue and all options than we have inside the Message Mapping... So it's will be not really practical for the maintenance.
The solution is really to catch this exception directly inside the UdF which generates this Exception.
I'm sure there is a Java solution for that, but not yet found the good syntax... I continue.
Regards.
Mickael

Source code has syntax error in SAP PI7.1 Mapping Test

HI All,
IN SAP P7.1 created simple two data types, message types and Message Mapping with only 2 fields. While testing the mapping in Message Mapping it is giving the error as
Source text of object Message Mapping: MM_Source_to_Target | http://abc.com has syntax errors:
Source code has syntax error:
I am able to activate the Datatypes and Message Types but not able to activate the Messge mapping.
Please if any body faced the same problem please give the solution.
One more thing is I am able to test the Message Mapping available in BASIS 7.1 Software Component objects. It is executing successfully...
but otherthan this SWC it not working success fully.....
Regards
Sridhar Goli

Hi David,
please check the default trace. It may contain the entry:
Error in compiling : java.io.IOException: Not enough space
If that's the case, maybe there's too little space for the swap file/device.
You should ensure that at least 2X (preferably 3X) of Heap (-Xmx) is configured as real swap
Hope that helps.
Regards,
Gábor Klauzer

I'm unable to open up Lightroom 5, I get this message in a pop up box: "Lightroom encountered an error when reading from it's preview cache and needs to quit" Underneath that is "Lightroom will attempt to fix this problem the next time when it launches."

I'm unable to open up Lightroom 5, I get this message in a pop up box: "Lightroom encountered an error when reading from it's preview cache and needs to quit" Underneath that is "Lightroom will attempt to fix this problem the next time when it launches." It hasn't, what should I do? Thanks Shawn (Irish Se7en) .

Can you try to rename (not delete!) the folder named "YOUR_CATALOG_NAME Previews.lrdata" and restart Lightroom?

Upgraded to 5.4 when opening lightroom get a message "encountered an error when reading from its preview cache and need to quite" tried this several time but get the same eror message

Upgraded to 5.4 when opening lightroom get a message "encountered an error when reading from its preview cache and need to quite" tried this several time but get the same error message. Says Lightroom will attempt to fix the problem the next time it launches but that is not happening. How do it fix this?

Delete the preview cache using your operating system. It is a folder whose name ends with Previews.LRDATA. Do not delete the Lightroom catalog, which ends with .LRCAT

Lightroom 5 is not opening it gives me an error message there is an error when reading from its preview cache and needs to quite

lightroom 5 is not opening it gives me an error message there is an error when reading from its preview cache and needs to quite
it also says it will attempt to to fix the next time it opens it doesn't do anything

Check this thread. Your Previews Cache files are corrupted.
Re: preview cache?

Lightroom encountered an error when reading from its preview cache and needs to quit. Says Lightromm will attempt to fix the problem the next time it launches, but on every re-launch I get the same message. Any clue as to how to fix this problem?

I recently updated my HP laptop's OS from WIndows8 to WIndows8.1. When I went attempted to open Lightroom5 I got the following message:
"Lightroom encountered an error when reading from its preview cache and needs to quit. "
"Lightroom will attempt to fix the problem the next time it launches"
Every time I relaunch I get the same message. I'd like to understand what might be causing the problem so I can remedy and get back to my photo editing. Any clue as to how to fix this problem would be greatly appreciated.
JPM

reset your preferences, Resetting (or 'Trashing') the Lightroom Preferences file - Lightroom Forums

When backing up lightroom 4 catalog, get message "lightroom encountered an error when reading from its preview cache and needs to quit" this occurs during optimization stage of backup

i upgraded from lightroom 4 to lightroom 5 and installed it on a separate hard drive. Initially had no problems util my computer crashed due to the failure of the drive on which Lightroom 5 was installed. Since having my computer rectified, i am unable to use lightroom 5 getting the message "lightroom encountered an error when reading from its preview cache and needs to quit"
I can still use lightroom 4, however, i get the same message when i try to backup the catalog. This occurs during the optimisation phase of backup.
I suspect it is related to Lightroom 5 creating a catalog from the Lightroom 4 files and cannot now locate those files or that they have been corrupted.
Would appreciate any solutions / suggestions.

You need to delete your preview cache and have Lightroom rebuild it. Cache location can be found here.
https://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-41.html
Why And How To Clear Your Lightroom Cache - Lightroom Fanatic

Everytime I open lightroom I get a pop up message saying "Lightroom encountered an error when reading from its preview cache and needs to quit" and it closes. Ive already tried reinstalling, nothing seems to work. Help please!

Every time I open lightroom I get a pop up message saying "Lightroom encountered an error when reading from its preview cache and needs to quit" and it closes. Ive already tried reinstalling, nothing seems to work. Help please!

Open the folder containing your catalog. In that folder you will find another folder with the extension .lrdata, and you need to delete that folder. After you do that, Lightroom should start normally and will create a new preview cache.

Tried to open lr 5 in cc. Receive error message "LR encountered an error when reading from its preview cache and needs to quit". How do I fix the problem?

Tried to open LR 5 in cc. Receive error message "LR 5 encountered an error when reading from its preview cache and needs to quit". How do I fix the problem?

Hi, Have a look under the "MORE LIKE THIS" on the right there should be an answer in one of those threads.

Error when testing from Message mapping test tab

Similar Messages

Maybe you are looking for