Error when testing SAP GUI for HTML

Hi experts,
i am getting the error "Service cannot be reached - the termination occured in system <sysid> with error code 403 and for the reason forbidden" when I test the service SAP GUI for HTML for transaction sicf. I am able to enter mit username and apssword und click login, and then iI get this error. Can anyone give me a hint?
Kind regards,
Simon

Hi,
Try publish all services on R/3, using SIAC_PUBLISH_ALL_INTERNAL transaction.
Hope this helps,
Iván.

Similar Messages

The page cannot be displayed: ITS error: SAP GUI for HTML

Hello,
I have created an iView that connects with a ECC system. When I clic on System Administration --> Support --> SAP Application --> SAP Transaction :
System: ECC
Transaction: su01
SAP GUI Type: SAP GUI for HTML
It shows: The page cannot be displayed.
It's manadory to use SAP GUI for HTML. Please, Do you have any idea??
Thank you
Best,

Hello Virginia Rodríguez,
1)Kindly check that System ECC in Portal is Up and Running under System Administration.
2) if u r done with first step then can try SAP GUI for Window in creation of Iview
it will Work.
Regards.
Soni Vinit

ALV GRID and Integrated ITS 7 (SAP GUI for HTML) - dissapears on reload

Hi All,
We have a custom report that uses an ALV grid to display information to the user. Within this grid, there are fields that are display only and fields that are editable. Also, the grid is wider than the screen's width. It works fine in ECC. It also worked fine when we were using ITS 6.4.
We have recently upgraded to ITS 7. Now when we run the report using a Transaction iView (in EP 7) or the Webgui service (SAP GUI for HTML), if a field that is editable has focus when an event is triggered that reloads the grid, the screen becomes blank. So, you can click the Save button and the screen goes blank, also, there are date fields in the grid and if you choose a new date, the grid reloads and the screen becomes blank.
We have found that when the screen is blank, you can use the "Page Up" button on your keyboard and the last few columns of the grid will appear. As if the entire grid has moved off-screen to the left.
If you click onto a non-editable field and refresh or save, the grid returns to its normal state.
We are on Basis Patch level 15.
Does anyone have any ideas on how to fix this?
Also, does anyone know of a standard SAP transaction we can call from the Webgui that would have a similar setup...with an ALV grid containing editable and non-editable fields? We would like to rule out any errors in the report itself. Since it worked before we upgraded and it works fine in ECC. This would be a really big help too.
Thank you so much!
-Kevin

Hi,
Thanks Raymond, I have seen Note 314568. I could not get the second link to work but I have looked at just about every Note in reference to Integrated ITS 7 and Tables or ALV Grids and there are very many, so it would appear that SAP has had a hard time with implementing this control, but I have not seen any instance that matches the problem we are having.
Unfortunately, SAP will not investigate this unless we can provide a standard Transaction that exhibits the same behavior.
If anyone knows of a standard SAP Transaction that displays an ALV Grid that is wider than the screen (requiring a horizontal scroll bar) and with editable and non-editable fields, that would be fantastic. If we can test against that, then we would know for sure if this is a problem with ITS / SAP GUI for HTML, or if there is an issue with this specific report.
Thanks!
-Kevin

Launch Approval Appraisal Documents in Iview format not SAP GUI for HTML

Hi,
Sorry iam not sure whether this is the right place to post this question.
I have a requirement where i need to change the appearance of UWL tasks related to appraisal approval.
Whenever a user clicks on approve apraisal tasks it is popping SAP GUI for HTML and taking to the backend showing Performance appraisal display.Our client are in need of normal iview rather than sap view( sap gui view).
I have identified the tasks related to approval appraisal.The tasks in the backend are
approval appraisal - perf appraisal - ts91000005, URL generation - ts12300108 , Submitted obj - WS 91000003.
i have created an iview based on http://xxx.xxxx:8000/sap/bc/bsp/sap/hap_document/documents_todo.htm?sap-client=xxx&sap-user=xxxx&sap-language=E
i have given the ID and iview PCD link in SWFVISU.Reregistered UWL again and logged in as a test user.When clicked on Appraisal approval i can see the appraisals completed.It wont allow us to edit.All hap_documents are BSP pages.
I guess i did something wrong.
i have followed these links.
http://wiki.sdn.sap.com/wiki/display/ERPHCM/PMSworkflowsin+UWL
Error: Launch appraisal Workitems in UWL in Portal...
Appraisal approval after completion not possible in BSP
Please let me know the procedure to show the approval items in a normal iview format.
Thanks in advance.
Chakri.

Chakri,
You will probably have to change the XML being used in your UWL. Go into the ItemType portion for the PM task and check/set the following properties
connector="WebFlowConnector"
defaultAction="launchIView"
Check if your Action tags within the ItemTypes have the following properties
name="launchIView" handler="SAPAppLauncher"
Check whether the Property within Action tags is linked to your BSP view that you want to trigger when the task is clicked
For e.g. <Property name="SAPIntegrator" value="ROLES://portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.pages/....."/>
Once you change your XML dont forget to re-register your ItemTypes to the connector you are using.
Good luck
Pooja

Problem with SAP GUI for HTML

Hi SDN
I am creating a SAP transaction iView with SAP GUI for HTML. I have give the Transaction code VA01 but when i execute the the iView it is displaying the SAP Easy Access screen in html. Can any one suggest me how to rectify this error and display the required transaction in html.
Thanks in advance.
Regards
Basha

Hi Basha,
Try this in the browser:
http://<host>:<port>/sap/bc/gui/sap/its/va01?sap-client=100(XXX)
1) It will ask for the username and password
2) Enter the credentials and it should directly take you to the VA01 transaction
If it fails again, try this:
http://<host>:<port>/sap/bc/gui/sap/its/vl31w?sap-client=100(XXX)
This should display the "Create Inbound Delivery NotificationTitle Create Inbound Delivery Notification " sreen."
If it faisl again, there is some problem with the way the ITS has set up. Check with your basis.
Thanks,
Sathya

Which role that Take a iview use SAP GUI for HTML need ?

hi all
    i made a transaction iview use the sap gui for html,and this ivew add a role,the role add a user.and the user had only this role.when i use the user logon the portal,it will give me a error message:
portal runtime error....
   whether it need another necessary role?
   and when i take the user to mapping user.i can't found any system that i had configration.
    but i can do all use admin user .
   what i can do?

Use System admin -> System Config and find your system in the PCD (under portal content). Right click and open -> permissions. Find a user or group or role and give it the end user permission. I'd suggest the group Everyone.
Cheers

Writing files in your local hard disk with SAP GUI for HTML

Hello SAP Experts
We have a problem with the SAP GUI for HTML, we create a program in ABAP that writes a file into your local machine, and it works just fine when we test it directly in the SAP GUI for Windows, but if we use the SAP GUI for HTML implementend in a SAP Portal 7.0 the same program doesn't run, it just freeze in the moment that the program must create the file, so my question is if it's possible to use that functionality in the GUI HTML, or do you have another suggestion???
Thanks a lot,
Ricardo Pineda

Thank you experts,
Your answers have been really helpfull, we have to try another method, by Studio Program or ABAP code, unfortunely we have to implement this in so many computers, so is impossible to configure one by one.
Thanks to both, and have a nice 2009!
Ricardo Pineda
Edited by: Ricardo Pineda on Jan 13, 2009 2:09 AM

SAP GUI for HTML

Hello Everyone,
I have successfully implemented XSS on our portal. Also, UWL is configured and working correctly. However, upon trying to access SAP GUI for HTML through the UWL, I get an error. This is an example of an error:
Transaction SWNWIEX+CURRENTWINDO is unknown
This is when clicking the link of a PCR request in the tracking tab of the UWL. It opens SAP GUI for HTML in a new window using the UWL - Launch SAP Transaction iView.
Does anyone have any idea why this happens?
Regards,
Motaz

Hello Motaz,
First of all, you are welcome to join the ITS/WEBGUI forum [here|Internet Transaction Server (ITS);.
About your issue, I am not sure about the SAP_BASIS version of your system, but maybe SAP note 1360904 is the solution!
At last, but not least, you may find [this Wiki article|http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=22375] interesting.
I hope this helps.
Best regards,
Cristiano

WebDynpro proxy page with Webdynpro iView and SAP Gui for html iView

Hello,
I have a requirement to have a page that has at the top of it a webdynpro for java iView screen with several links that when pressed pop-up various data pulled from the back-end. This part is fine and presents no problem. Beneath this the requirement calls for a SAP Gui for HTML iView to be displayed. Which is no problem either. The problem occurs when one of the links in the java webdynpro application at the top of the screen is pressed it causes the SAP Gui for HTML portion to refresh and come back to the beginning. So for example you first navigate to this screen and you go into the sap gui for html portion and drill into 2 or 3 screens in the sap gui for html transaction. If you then press one of the webdynpro links the sap gui for html (which is a separate iView) refreshes and you are taken back to the initial screen. This only occurs when using a web dynpro proxy page. If I use a standard page the SAP Gi for html does not refresh. Unfortunately there are other things not mentioned here that require us to use the webdynpro proxy page.
Any help is greatly appreciated,
Bert

Use System admin -> System Config and find your system in the PCD (under portal content). Right click and open -> permissions. Find a user or group or role and give it the end user permission. I'd suggest the group Everyone.
Cheers

Problem while printing from SAP GUI for HTML

Hello,
We are trying to print a delivery confirmation from the portal using SAP GUI for HTML. We have followed note 771683 to do this. However we are facing the following problems:
1) The print action(PDF creation) is not triggered until the user performs some action
2) the PDF that is created is corrupted(does not open)
In order to correct this we tried to implement note 957292. However, the changes to the object FRONTEND_PRINTPOLL_FRONT_REQUEST.HTM mentioned in this note created problems. So we decided to do the changes to this object manually. But we see that the SAP note doesn't contain any information on changes that should be implemented for this object.
Question:
Is the note 957292 only way to solve the printing(PDF) problem? If not, how can we trigger the automatic creation of the PDF and remove the error from the PDF file?
If yes, any idea what is causing the problem during the note implementation?
We are on NW2004s - EP7.0 SP10
ITS 7.0
Thanks in advance.
Regards,
Reena

Hi,
configure printer in SPAD , no setting for JAVA GUI
check note
605467:SAPscript/Smart Forms: Print preview in SAP GUI for Java
634158 SAPscript/Smart Forms: Print preview in SAP GUI for Java (2)
1024624 SAPscript/Smart Forms: Print preview in SAP GUI for Java (3)
regards,
kaushal
regards,
kaushal

Store Business Document via SAP GUI for HTML

We are trying to use SAP GUI for HTML via UWL in Portal to deliver Workflow. When we try to attach files for the "Store Business Document" step, it gives an informational message "Store business document Access via 'NULL' object reference not possible" but the documents themselves never get attached. We are on ECC 6.0 and Portal 7.0. Any help is greatly appreciated.
Thanks!
- Rao

I've found a working solution a minute ago: See SAP Note: 510007
Best regards
Danny

Tcode PA70(Fast Entry) using SAP GUI for HTML

Hi Gurus,
when i am copying data(one row) from excel sheet into infotype using
tcode PA70(Fast Entry),through EP(transaction iview Created Using SAP
GUI for HTML).
enter TCODE PA70-> select Recurring Payments/Deductions -> click
create -> copy the data from excel sheet and past
The whole row of data is copied into one field . the data is not copied
into the corresponding fields.
please find the screenshot.
<a href="http://img337.imageshack.us/i/guiforhtml.jpg/">[IMG]http://img337.imageshack.us/img337/1723/guiforhtml.jpg[/IMG]</a>
Uploaded with <a href="http://imageshack.us">ImageShack.us</a>
Regards
K Naveen Kishore.

Hello Naveen,
I don't think this is possible. Please see note 314568 about the limitations of the SAPgui for HTML (webgui), the "Clipboard access" section seems to describe this limitation.
Edgar

Calling SAP GUI for HTML

Dear Gurus!
we are facing a peculiar issue. I have created 2 'GUI for HTML' transaction iviews one connecting to 'copy of dev ': ECC:system number x, and the other connecting to 'copy of quality': ECC, System number y.
Both these ECC systems have same hostname but different system numbers and different system ID's ofcourse.
When I create GUI for Windows Transaction iview, correct system is opened say transaction 'SMEN'. However when I create GUI for HTML, the Dev ECC system is called nevertheless in both the iviews.
the behavior is the same even if I test with direct transaction using System Administrator--> support link.
We are on 7.4 portal with backend ECC 6.
Please advise
Regards,
Ankur Agarwal

Thanks Pradeep,
Yes the system objects are fine. there is just one similar entry for both ie the hostname, other wise everything is diff like system num, sys Id, gateway host etc.
I am still perplexed why on testing, 'GUI HTML' goes to dev only in both cases, while "GUI windows", works fine and goes respectively to dev and qa.
ANkur

Image not displaying properly for SAP GUI for HTML transaction iview

Hi,
We have a sap gui for HTML iview for transaction REORRR in portal. After giving enough inputs this leads to Business Document Navigator screen(part of Document management) where i need to display a document(.jpg image in this scenario). When i double click on the image it is opening on the right side of the screen but in a compressed format where in we need to scroll down to see the image. But i would require the image to display with out scroll bar or in a new window.
When i change the format of the iview as SAP GUI for Windows the image is opening in a new window.
I would like to know whether there is any configaration settings either in portal or in Document management side. or is this any limitation of the SAP GUI for HTML scenario.
regards
Bharat.

Hi,
You can open this iview in a new window make the setting in the iview properties that will allow the iview to be opend in a new window.
Regards,
Vamshi.

SAP GUI FOR HTML - SAP Netweaver loading screen

We have an SAP EP7 portal with an ECC 6.0 R/3 backend. In the portal I have an SAP Transaction iView using transaction code PA64. The display in the portal uses SAP GUI for HTML.
The iView loaded correctly (i.e. displayed the transaction screen correctly in the Portal Content Area) until our recent SP upgrades to the R/3 backend and portal. For the backend we moved from SP13 to SP15. For the portal we moved from SP14 to SP18.
The issue that I now have is that an SAP Netweaver (SAP GUI FOR HTML) loading screen now appears (for about 5 seconds) prior to the PA64 transaction screen being displayed in the Portal Content Area.
Whilst I accept that this is not a major issue, I would like to suppress the display of this loading screen. Does anyone know how this can be achieved?
Many thanks
Audre Beenen

Thanks Michael. We also updated our system and are having the same issue. As you advised and I see in the SAP note, I'm going to add the ~nosplash parameter. We do have SAPKB70017. Is there a particular value associated with that parameter when it is added in SICF?
Thanks,
Pam Laverty

Error when testing SAP GUI for HTML

Similar Messages

Maybe you are looking for