Error when tranfering the text data
Hi all
I am getting an error when transfering the text data thru flat files .
It is asking " No transfer structure available for the source system ," and saying that 0langu is not assigned to source syatem.I am working on 3.5.
pls suggest me.
thanks in advance
karna
here are teh steps:
1) craete source system in BW as say Flat_file
2) go to inforsource --? create inforsource --> right clik on infosource and say assign datasource
3) select flat_file here and say YES
4) then for flat file, trnafer structure mapping has to be done manually. so in trs struc screen ,go to datasource tab and enter your corresponding infoobject.
5) then go to tranfer rule tab and propose the rule.
If it helps, please assign points. In case of doubt, please get back
Regards
Pankaj
Similar Messages
-
Error when extracting the text data
Hi all
I am getting an error when transfering the text data thru flat files .
It is asking " No transfer structure available for the source system ," and saying that 0langu is not assigned to source syatem.I am working on 3.5.
pls suggest me.
thanks in advance
karnahi,
you have to decline 0LANGU, STTXT(short text), MDTXT(medium text),
LGTXT(long text), and respective key field(primary key) of attribute for
text data source. give the above five info object's in transfer structure for
text data source and activate it.
if helpful provide points
regards
harikrishna.N -
Error When Tranfering the Exposure Data Status (T.Code TEM20 )
Hi Experts,
Runtime Errors SAPSQL_ARRAY_INSERT_DUPREC
Exception CX_SY_OPEN_SQL_DB
Date and Time 21.07.2008 19:01:43
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLTPM_TRG_DB" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in
procedure "TPM_TRG_SAVE_TO_DATABASE" "(FUNCTION)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
How to correct the error
Use an ABAP/4 Open SQL array insert only if you are sure that none of
the records passed already exists in the database.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"SAPSQL_ARRAY_INSERT_DUPREC" "CX_SY_OPEN_SQL_DB"
"SAPLTPM_TRG_DB" or "LTPM_TRG_DBU03"
"TPM_TRG_SAVE_TO_DATABASE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"TPM_TRG_SAVE_TO_DATABASE" "(FUNCTION)", or its possible occurrence must be
declared in the
RAISING clause of the procedure.
Regards,
Saranhi,
Duplicate Entry is the prblem.
Follow this link
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/sapsql_array_insert_duprec-453665?cv=expanded#
Regards. -
Error 4 when updating the text data
When i am trying to load the data using IP i am facing the issue Error 4 when updating the text data.Please suggest me
Edited by: srikanth reddy612 on Dec 15, 2011 12:45 PMhi srikanth,
you might have selected given lowercase data
and please check in the Infoobject the lowercase Checkbox is unchecked then it will allow you to update from IP.
also check in the Datasource fields tab whether particular field is unchecked with lowercase.
if checked all records you are pushing will have to be in uppercase.
thanks
Sankaresh S -
Error when reading the access data(URL,user, password) for Adapter Engine
Hi,
We are getting this error in production system
"SXMBSysErrorAlerts, Category INTERNAL, Error code: AE_DETAILS_GET_ERROR error text: Error when reading the access data (URL, user, password) for the Adapter Engine".
Please tell what can be the cause of error. Where are the access data (URL, user, password) for the Adapter Engine read from?
Its urgent. We are in support project.
regards,
johnHi jhon,
please check the following threads to resolve the problem.
AE_DETAILS_GET_ERROR
Error : no_adapter_engine_found: Unable to find Adapter Engine
regards
mahesh. -
Error when activating the master data
Hi
I am getting the following error when activating the master data. when using IDOC as transfer method in transfer rules
<b>Error while creating table 'EDISEGMENT' entry '/BIC/CIRB0CLASS_NUM_TEXT'</b>
If anyone came across this kind of problem plz share the solution.
Regards
AnnieHi
I solved the problem. AFter changing from PSA to IDOC, i just saved first and activated. it got activated. But thanks for the response.
There are no short dumps in ST22
Regards
Annie -
Error when reading the access data for the Adapter Engine
We are getting the following error in XI. It started on Jan 22 and resolved on Jan 23 automatically. Nothing has been changed and we don't able to understand how problem started and how it resolved:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.xpd.dbcixpd</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>3: Unable to find URL for Adapter Engine af.xpd.dbcixpd</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.xpd.dbcixpd</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Pls suggest if anyone has gone thru same problem.
Regards
AmarI got the same problem while using RFC lookup.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.tx1.netweaver</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>3: Unable to find URL for Adapter Engine af.tx1.netweaver</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.tx1.netweaver</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any idea ,when we get this error usually. -
Error when reading the DDIC-data for table
Hi Tobias
We upgraded from DMIS 2011 SP04 to SP07. We are in development system.
To test initial load, we stopped replication for an existing table and then started replication for the same table.
Mass transfer id connects ECC system to BW on HANA system.
Replication errored with the following message:
Error when reading the ddic-data for table MARD (RFC destination DWACLNT010).
Looking for your guidance.
Kind Regards
Kamaljit VilkhooWas able to solve using oss note 1972533.
-
Error when generating the text environment
Hi Friends,
When iam logging on to SAPGUI iam able to lauch the gui but no text elements are being displayed the screen is completely blank and when i try to execute any transaction or perform any action.. the following error is getting displayed.
Err:sapgui:620
Error when generating the text Environment.
Please provide me the necessary help.
Regards
KhaiserHi,
Just a suggestion (not sure it will work) - upgrade your SAPGui to the latest one e.g. 7.10 or patch it.
Do you see text elements if accessing the sytem using DE language ?
Regards,
Mike -
Read error when reading the master data of 0EMPLOYEE on demand, attribute 0
Hello All,
While loading data for HR data source 0HR_PA_OS_1 i am getting the below error message..
Error 1 in update.
Read error when reading the master data of 0EMPLOYEE on demand, attribute 0COMP_CODE
Please let me know how can it be resolved.
Regards
Rohit PartiThe problem occurs during data load from R/3. It was not occuring before. When I go to check the PSA contents I get a runtime error - GETWA_NOT_ASSIGNED.
Error analysis
You attempted to access an unassigned field symbol
(data segment 32821).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump. -
Error when initializing the Transaction data From ODS to CUBE.
Hi,
we have initialized the load from source system to ODS. the load was successful, and when loading from ODS CUBE(initialization). it is giving the following message.
No SID found for value '0000436038' of characteristic 0CUST_SALES.
We have updated the master data of 0CUST_SALES (DELTA UPDATE).
but still getting the same message when updating the data packets from PSA. I am unable to find the reason.
Please let me know is there any other solution.
with regards,Hi A.H.P,
I have loaded master data for all the objects you have mentioned( atributes and texts). but still data packets are not getting updated. it is giving the message.
i have also tried the elementary tests and combined tests of 0CUST_SALES, in RSRV. there were no errors found.
these data targets were newly implemented. would it be problem with routines or any other means.
Please let me know ASAP.
with regards. -
Error when loading the master data
Hi all,
Can anybody help me out. I am loading the master data from DB Connect source. When i am trying to load it it is giving the runtime error PERFORM_CONFLICT_TAB_TYPE. Can anybody tell me what could be the problem & necessery steps to take.
Thanks in advance.
Regards,
Shaik.Hi,
Please go through the following threads:
PERFORM_CONFLICT_TAB_TYPE shortdump during data loading into ODS
Perform_conflict_tab_type error
PERFORM_CONFLICT_TAB_TYPE error-Urgent!!
Next time you might want to just search the forum first... lots of surprises!
Hope this helps,
Cheers,
Gimmo -
Empty paragrpahs in a textflow cause runtime error when displaying the text
Hello there,
when I create a textflow which has empty ParagraphElements in
it (i.e. a ParagraphElement without any children) I get this
runtime error once I try to display the text in a container:
Error: Error #2175: One or more elements of the content of
the TextBlock has a null ElementFormat.
Is this a bug, or is there a legitimate reason for this
error? If so, I'd like to understand why. In my reasoning an empty
ParagraphElement should just result in the rendering of a newline.
But maybe I'm thinking too much in HTML terms here...
I appreciate any light you can shed on this,
thanks in advance,
Roland
P.S. I'm using the latest build 370Hey Richard,
thank you very much, and I was indeed already using your
mentioned workaround, I was just wondering whether it was a bug or
something I didn't fully understand :) But now I do, so thanks for
your time. -
Error when activating the copied data elem.:Medium key word in language DE
Hello,
I have copied data element dats and created a z data element for myself and added the text description.
Am getting following error.Please guide me for the same-
Check data element ZDATS1 (C04EAPHALES/15.01.10/16:37)
Medium key word in language DE: length 18 > maximum length 10
Data element ZDATS1 is inconsistent
Please help me resolve the issue.
Thanks.
Edited by: sanjivrd on Jan 15, 2010 12:21 PMHi,
It won't take from domain it always takes from data element... data element only stores the semantic information... Try to change the domain description to someother and then activate both domain and dataelement...and also table and then see...It will take from data element only.
Regards,
Nagaraj -
Error when tranfering the planning results from SCM to R/3
hi,
While defining distribution definition i am getting follwing warning message " Location 1000 originates from source syst. T90CLNT800 and distr. to targ syst R/3CLNT800**
while transfering the result from SCM to R/3 it got stuck in the queue. there i able to see T90CLNT800 not the new one( R/3CLNT800) which defined in publication. also i deleted all the distribution definition belongs to T90CLNT800.
Initially i worked with T90CLNT800 and connected it to APO.Created data in this client and ciffed it to APO.
Afterwords, i created client R/3CLNT800 and now using with APO system.
how to solve this issue.
regards
ThennarasuHi,
I understand that this problem is in Dev system.
First do the initial tranfer of the master data and transaction data and take a fresh run in APO. But before doing this delete APO transaction data.
If this doesn't work then follow as given bellow.
If you change the logical system you have to run BDLS to convert the logical system in the database tables.
Do this in the R/3, then do the initial tranfer of the master and transaction data and take a fresh run in APO.
Regards,
Kishore Reddy
Maybe you are looking for
-
SOAP Sender Adapter Not working
We have the following Synchronous sceanrio: Third Party System <> PI <> SAP ECC The interface works well in our DEV and PreProd environments but has stopped working in our QA environment. The SOAP Sender Adapter is giving me the following error: fail
-
Color correcting master clip/parent file
can I color correct the master clip and effect all of the affiliate clips in a timeline? Thanks
-
How do I get Adobe Application Manager to start (again)?
Hi! Adobe application Manager just told me that there were available updates for Cs5. I Pressed Update, but noticed that Photoshop and Bridge were running, so I stopped the installation to quit the programs. I stopped the installation when you're sup
-
Capacity evaluation in work center which has number of indivisual capacity.
Hi. guys. Work Center(WC01) has 2 indivisual capacity. and available capacity is 16H. (8H * 2) I made capacity requirement(production order) with 26H. Capacity evaluation displays the result as below. Entries Rem.cap.reqs Avail.capacity
-
How to add purchase amount & delivery cost in Bills of Ladding
According to my client i want to use biils of lading while picking bills of lading system should pick delivery cost and purchase amount. Is it way using BADI/Exit Or Implicit Enhancement is there. Please let me know. Moderator message : Spec dumping