Error when tranporting a cube

Hi all,
I am having a problem when I try to transport a cube, the log in the order says:
Start of the after-import method RS_CUBE_AFTER_IMPORT for object type(s) CUBE (Modo activación)
Action canceled
The user terminated processing of objects
The user terminated processing of objects
Error when activating InfoCubo ZTC_C11
End of after import methode RS_CUBE_AFTER_IMPORT (Modo activación) - runtime: 00:00:07
Start of the after-import method RS_CUBE_AFTER_IMPORT for object type(s) CUBE (Modo de borrado)
End of after import methode RS_CUBE_AFTER_IMPORT (Modo de borrado) - runtime: 00:00:00
Errors occurred during post-handling RS_AFTER_IMPORT for CUBE L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
As you can see the log it doesn't say enought information about the error. We are in BI 7.01 Enh 06.
The only object in the transport is the Cube ZCT_C11. Do you know what it could be happening?
Regards, Federico

Hi again,
I tried to activate the cube with program RSDG_CUBE_ACTIVATE with the following configuration:
InfoCube type = 'B'
Object Version = 'M'
InfoCube = ZTC_C11
And after some verification a pop up appears with the following message:
"Error in Object Editing: Invalid call sequence for interfaces when recording changes"
Message no. TK425
Diagnosis
The function you selected uses interfaces to record changes made to your objects in requests and tasks.
Before you save the changes, a check needs to be carried out to establish whether the objects may be changed. This check must be performed before you begin to make changes.
System Response
The function terminates.
Procedure
The function you have used must correct the two Transport Organizer interfaces required. Contact your system administrator.
I click on OK, and then other pop up appears:
"Error when activating; Please analyze log"
And it takes me to the Log, where it says there was a "Problem class important"
Action canceled
The user terminated processing of objects
Error when activating InfoCube ZTC_C11
As you can see, It says the same written in transport log.
What else can I do?
Thanks in advance, Federico

Similar Messages

SAP BW on HANA: Error when migrating standard cube to the In-Memory Cube

Hello,
When migrating an standard infocube from a recently migrated BW to BW on HANA in-memory optimized cube, there is an error, for all the cubes.
Implemented few notes, though luck yet. Appreciate if those, who saw and resolved it can help.
Error while executing stored procedure for data implementation
Message no. RSDRI_HDB041
Diagnosis
The InfoCube data to be migrated is processed using a stored procedure. This procedure reported an error.
System Response
Error code: 257
Error text: sql syntax error: line 1 col 14 (at pos 14)
Regards
Manish Madhav

Hi Mahish,
I see this post is from March. I understand you have got some solution to it already.
If yes, could you please share the solution.
Thanks and regards,
Aaloka

Error when transport/activate cube

Hi Expert,
I face the problem when i tranport cube into BW Production. it displays "Moved value is not within the allowed value range". Then when try to activate manual in BW Prd, it's also the same error.
On Bw delovepment, all it's working fine.
I will assign point.
Thanks in advance
Siandari

Hi venkat,
The error msg is
Start of the after-import method RS_CUBE_AFTER_IMPORT for object type(s) CUBE (Activation Mod
   Moved value   is not within the allowed value range
   Error BRAIN 617 during after import handling of objects with type(s) CUBE
   Start of the after-import method RS_CUBE_AFTER_IMPORT for object type(s) CUBE (Delete Mode)
   Errors occurred during post-handling RS_AFTER_IMPORT for CUBE L
   RS_AFTER_IMPORT belongs to package RS
Thansk in advance.
rgds,
Siandari

Windows error when importing Essbase cube into OBIEE

Hi all:
This question is perhaps more relevant to the OBIEE forum, but I put it up there a few days ago and got no response. So now I'm hoping to get some help on this side of BI land!
My issue is that I'm trying to import an Essbase cube (system 11) into BI Admin Tool, but whenver I go to "Import from multidimensional" and hit "OK" after entering in the essbase server name and log/pwd, the BI Admin tool crashes. I get no error msg except for a couple of errors I see in the Windows event log:
1. Faulting application path: C:\OracleBI\server\Bin\AdminTool.exe
Faulting module path: C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin\essapinu.dll
2. Faulting application path: C:\OracleBI\server\Bin\AdminTool.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
I'm running a standalone OBIEE 10.1.3.4 on my local machine (Windows 7 32-bit) and the Essbase Server is on a separate Windows 2008 machine. I can ping between machines and all ports are open on the Essbase machine, so I don't think this is a network related issue. Also, my OBI RPD is working fine in all other respects. I have other data sources working in there with no trouble. My Essbase server is also working fine. I also tried to do this in a new RPD in case the old one was corrupted, but get the same issue.
Any help would be greatly appreciated.
thanks,
Akshay

Akshay,
You must have the Essbase client installed on the same machine where your OBI Administration Tool is installed. This should get you past the error that you are receiving and should fix your problem. Since you are running 32-bit just download the 32-bit Essbase client from Oracle. You will most likely need to run download the required files to install the Essbase client and with Hyperion 11x you should be familiar with that required software matrix since you have Essbase running on a seperate server already.
But now looking at your post I see that you state that one of the paths in your error is C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin\essapinu.dll. The path C:\Oracle\Middleware is usually seen in Hyperion EPM 11.1.2. So, are you running Essbase 11.1.2 and OBIEE 10g or are you running OBIEE 11g? You'll need to specificy as OBIEE 11g can only interface with Hyperion Essbase 11.1.2 at present. And if I recall correctly the 11.1.2 Essbase client does not work with OBIEE 10g. Please clarify on these points.
Let me know if that helps fix your issue. If that doesn't fix it post back here and we see if we can keep you going forward.
Don't forget to reward points.
Cheers,
Christian
http://www.artofbi.com

Error when transport Info Cube(0SD_C01)

Hi Experts,
whenever i tried to transport the infocube i came across the following errors. But good thing is that all my object related to cube is in active mode. I had used "data flow before" during transportation. Please note that datasource 0Vtype_text is not present in the R/3 development either. Is this a serious error or can we proceed further without worrying about it? Please find the following error
"Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode)
DataSource 0VTYPE_TEXT does not exist in source system FGLCLNT850 of version A
Mapping between data source 0VTYPE_TEXT and source system FGLCLNT850 is inconsistent
DataSource 0VTYPE_TEXT does not exist in source system FGLCLNT850 of version A
Field LANGU will not be delivered from DataSource 0VTYPE_TEXT in source system FGLCLNT850
Field TXTMD will not be delivered from DataSource 0VTYPE_TEXT in source system FGLCLNT850
Field TXTSH will not be delivered from DataSource 0VTYPE_TEXT in source system FGLCLNT850
Field VALUETYPE will not be delivered from DataSource 0VTYPE_TEXT in source system FGLCLNT850 "
Reward point is must for each and every helpful answer.
Thanks in advance.
Regards
Deepak

Hi Deepak,
Please go to RSA5--->check this patch
PI_BASIS                       PI Basis
>
    0CA_GD                         General DataSources
______________>
        0CA_GD-IO                      Master Data for General DataSour
____________________>
            0VTYPE_TEXT                       Value Type for Reporting
Activate this and then replicate this ..
Hope this helps and dont forget to assign points if this helps
Regards
Rahul Bindroo

Error when querying remote cube

Hello,
We recently changed our source system in our development environment and I am now getting a query error message for the datasource and source system. The source system checks ok. I can load data. So i dont think the problem is the source system. Is there some config required for the BAPI? Maybe something that is source system specific? Any ideas?
Thanks,
TMS

Error while reading data; navigation is possible
Error reading the data of the infoprovider
Error system error: program
Error messages for datasource from source system

Errors When Installing 0PUR_C01

Hi Friends,
I get the follwoing error when Installing this cube.
(1)Error when reading the update rules fr InfoCube 0DBDUNS_NUM, ISource 0DBDUNS_IMPORT_ATTR in vers.M
(2)Transfer rules 0RF_ARTHIER_ACT BWDCLNT100
(3) DataSource 0RF_ARTHIER_ACT for source system BWDCLNT100 is not available.
(4) Data source 0DBDUNS_IMPORT_ATTR not maintained
I tried to Install them from RSA5 , but they are not availble either, PLease advice,
Thanks in advance,

HEy Smily,
Try installing them from Business Content in RSA1.
These update rules etc need to be installed in BW from business content.
Also, data sources need to be installed from RSA5.
hope it helps...
Gaurav
Assign points if it helps**

Error when updating the data from DSO to cube

Hi,
I am getting the error when uploading the data from the ods to cube.
The following is the error message.
Unable to determine period for date 20090101, fiscal year variant Z2: Error #
How can i solve this issue.
Regards
Annie

Hi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha

How to troubleshoot SQL error when copying cube

I was successful in creating Info Package and running it to copy data frin cube 1 to cube2. However, I get an error when
Running the package. My source cube has 1.9 million rows. However, Info Package only loaded 30,120 records. Looking in monitor logs, it shows me following error stack:
System error in program SAPLRS_EXECPTION and from RS_EXEPTION_TO_MESSAGE
SQL Error 0
Unknown error in SQL Interface
Errors in source system
When I click on long text button for Unknown error in SQL interface:
The SQL interface of the application server (DBSL) has reported an unknown error. This error can be caused by:
- Overflows when aggregated data is read from the database in ABAP. If this occurs, the definition for the corresponding key figure must be changed.
- Internal errors
It seems to be some kind of Overflow error. Is there any way to get more information on the cause
Of this erroru2026.
THANKS A LOT.

I tried SM50, it shows me all processes, but I still cannot figure how to set developer trace. Following is detailed information on what I am doing in copy of cubes and errors I am getting:
Subject: Troubleshoot Copy of Cubes
I have tried to copy several cubes on my BI 7.0 and all of them same error, so I am wondering whether I am doing something fundamentally wrong.
                System error in program SAPLRS_EXECPTION and from RS_EXEPTION_TO_MESSAGE
                SQL Error 0
                Unknown error in SQL Interface
                Errors in source system
After error occurs I get following message in mail:
          The error occurred in Extractor.
           Refer to the error message.
                 Procedure
             How you remove the error depends on the error message.
                 Note
          If the source system is a Client Workstation, then it            is possible that the file that you wanted to load was being edited
at the time of the data request. Make sure that the file is in
the specified directory, that it is not being processed at the
I looked in SM21, system logs, whenever error occurs, I see the u201C
Database selection with invalid cursor &5&5
The database interface was called by a cursor (in a FETCH or CLOSE cursor operation) that is not flagged as opened. This can occur if a COMMIT or ROLLBACK was executed within a SELECT loop (which closes all opened cursors), followed by another attempt to access the cursor (for example, the next time the loop is executed).
I DO NOT UNDERSTAND WHEN I AM COPYING FROM CUBE, WHY SAP BW will generate u201Cinvalid cursoru201D message. Not sure whether it is normal, i.e., not a real error,
My cube copying (from cube 1 to cube 2) is a straightforward procedure:
a.     Select Copy from Cube 1 and create Cube 2.
b.     Create Export Data Source from Cube 1 Menu.
c.     From Cube 2 menu, Create Update rules, In update rules select DataSource as 8Cube1.
d.     Create an Info Package for 8Cube1 under Infosource/DataSource and then run the package.
Certain no of records e.g.. 3248 or so get loaded and then the error messages are generated, why?
Really appreciate any help. I tried SM37, does not give any clue. I also Tried SM50, it shows me the process, but I still cannot figure how to generate developer trace.
Since behavior is same for several cubes I tried, something else also needs to be done, I do not know what???

Error when build cube - A duplicate attribute key has been found when processing...

Hi all,
I got an error “Errors in the OLAP storage engine: A duplicate attribute key has been found when processing: Table…” when built new cube. It looks strange in my case. I created a small example to re-produce this error as below:
I create a data source table as below
AgencyName(varchar(50))-----MediaSpend(float)
OE------------------------------------100
Œ-------------------------------------200
Then I create a cube base on this data source with a dimension AgencyName and 1 Measure MediaSpend.
The error happened again. This look link a special case when ‘OE’ and ‘Œ’ existed in a dimension.
Do you have any ideas on this?
Thanks,

Hi khoana,
Here is a similar thread about this topic for your reference, please see:
A duplicate attribute key has been found when processing:
http://social.technet.microsoft.com/Forums/en-US/sqlanalysisservices/thread/7c72639b-a050-4243-9f1d-4da906e981d5/
Regards,
Elvis Long
TechNet Community Support

"Internal error: An unexpected exception has occurred" error message displayed when browsing a cube.

“Internal error: An unexpected exception has occurred“ error message displayed when browsing a cube.
The error behaviour is quite irregular and does not occur for specific condition.
Will cumulative update 9 for SQL Server 2008 R2 (SP1) installation help to fix the issue which is provided on the below link:
(http://support.microsoft.com/kb/2152148)
The current version of SQL Server I am using is as below:
Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64) Jun 17 2011 00:54:03 Copyright (c) Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
Thanks in advance for the help!

Hi Mon,
The hotfix you said is for Microsoft SQL Server 2008. So it will not work on your scenario since you are using SQL Server 2008 R2.
Based on the limited information, we cannot give you the exact reason that cause this issue. In order to narrow down this issue, you can apply the latest Service Pack and Cumulative Update as GregGalloway said. Besides, you can troubleshoot this issue by
using the Windows Event logs and msmdsrv.log.
You can access Windows Event logs via "Administrative Tools" --> "Event Viewer". SSAS error messages will appear in the application log.
The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
Data collection for troubleshooting Analysis Services issues
Regards,
Charlie Liao
TechNet Community Support

Error when trying to view reports or manually processing the TFS data warehouse and analysis services cube

Hello Guys,
I am trying to configure the reporting for TFS using SQL Server. But I get following error when viewing any report:
So I try to manually process the cube to check if it works. I am following this article: https://msdn.microsoft.com/en-us/library/ff400237.aspx
When I click on GetProcessingStatus and invoke it (with last field set as TRUE) I get following error:
Please advice as to how to resolve this issue and be able to see the reports.

I have managed to resolve this issue. Note that for all purposes of this question and answer, mydomain\tfsadmin is a generic user (used to install all software). This is a proof of concept account, for test purposes
The thing is that while installation of the SQL Analysis service I had given the username: mydomain\tfsadmin (a generic user for testing) as the Analysis service administrator, instead of the 'Domain admin' group.
Still I have managed to resolve this issue.
Steps:
1. Make sure that the user (mydomain\tfsadmin) is a member of Analysis Server -> TFS_Analysis db -> Roles -> TFSWarehouseAdministrator and TFSWarehouseDataReader. (This actually happens automatically when you run the TFS Admin console and configure
reporting and provide the username that will access the Analysis db, etc. In my case the user is 'mydomain\tfsadmin')
2. It is a bad practice to manually process the cube (you can do this is make sure that there are no errors, but only after completing the following steps till step 5)
3. Also make sure that NT AUTHORITY\NETWORK SERVICE is member of the Analysis db -> Roles -> TFSWarehouseAdministrator ->
this will resolve the error which appears in the 2nd screenshot in the question.
4. Then you can right click on the Analysis db and run process. If this is throwing error as shown in above reply of mine, then you need to follow https://msdn.microsoft.com/en-us/library/vstudio/ff400237.aspx
a. http://localhost:8080/tfs/TeamFoundation/Administration/v3.0/WarehouseControlService.asmx
b. Choose
ProcessWarehouse, run it.
c. Choose ProcessAnalysisDatabase, type 'Full' and run it.
d. Choose GetProcessingStatus,
enter 'TRUE' in last field and run it.
e. I don't get any errors at this point.
5. Now you can connect to the Analysis server via SQL Mgmt Console, right click on Analysis db (TFS_Analysis) and click Process. It all works good.
6. Now you can browse to the report URL (to get this URL you can open Team explorer 2013, connect to you team project, on RHS click 'Reports', Click 'Go to Site'.
DONE.

Error when trying to load data from one cube to another

Hi Friends
I am getting an error when using extractor checker for datamart data source. The cube in question is compressed. this is what i get when i view the logs.
SQL Error: 575-
SQL0575N View or materialized query table "SAPBWP./BIC/VZTCOOMC02F" cannot be used because.
Please help
Thanking you in anticipation
Samuel

Rememberme -
No, the SAP_FACTVIEWS_RECREATE program cannot and will not uncompress the data. A fact view exists for every infocube which combines the E and F fact tables. You can see this view using SE11 -> View -> /bic/vxxxxf (where xxxxx is your infocube tech name). When you run this program this view is dropped and recreated thus eliminating any incosistencies that lead to the error posted in this thread.
Hope this helps!

Error when I try to maintain cubes

Hi all,
I have this error when i try to maintain some cubes with dimensions.
Failed to Build(Refresh) OLAP_BUILD.MAIN Analytic Workspace.
***Error Occurred in BUILD_DRIVER: In __XML_SEQUENTIAL_LOADER: In __XML_UNIT_LOADER: In __XML_RUN_CC_AUTOSOLVE:
Someone knows how I can learn more about this error.
Best Regards

I think this might be an issue with 10.2.0.2 version, I would try applying the 10.2.0.3 patchset and then apply the additional the OLAP A patch for your specific platform. The patches can be downloaded from Metalink.
Regards
Keith Laker
Oracle EMEA Consulting
OLAP Blog: http://oracleOLAP.blogspot.com/
OLAP Wiki: http://wiki.oracle.com/page/Oracle+OLAP+Option
DM Blog: http://oracledmt.blogspot.com/
OWB Blog : http://blogs.oracle.com/warehousebuilder/
OWB Wiki : http://wiki.oracle.com/page/Oracle+Warehouse+Builder
DW on OTN : http://www.oracle.com/technology/products/bi/db/11g/index.html

Error when building cube

Hi,
I get this error when I am building the cube:
XOQ-00703: error executing OLAP DML command "(SYS.AWXML!R11_COMPILE_TIME_DIM('TIME.DIMENSION') : ORA-00600: internal error code, arguments: [xspg: RSALOC02], [], [], [], [], [], [], [], [], [], [], []
Has anyone ever seen this?
Regards /Magnus

Got an answer on this from Oracle support. The issue is solved by applying patch 9789172.
/Magnus

Error when tranporting a cube

Similar Messages

Maybe you are looking for