Error when transport/activate cube

Hi Expert,
I face the problem when i tranport cube into BW Production. it displays "Moved value  is not within the allowed value range". Then when try to activate manual in BW Prd, it's also the same error.
On Bw delovepment, all it's working fine.
I will assign point.
Thanks in advance
Siandari

Hi venkat,
The error msg is  
Start of the after-import method RS_CUBE_AFTER_IMPORT for object type(s) CUBE (Activation Mod
   Moved value   is not within the allowed value range
   Error BRAIN 617 during after import handling of objects with type(s) CUBE
   Start of the after-import method RS_CUBE_AFTER_IMPORT for object type(s) CUBE (Delete Mode)
   Errors occurred during post-handling RS_AFTER_IMPORT for CUBE L
   RS_AFTER_IMPORT belongs to package RS
Thansk in advance.
rgds,
Siandari

Similar Messages

  • Error when transport Info Cube(0SD_C01)

    Hi Experts,
      whenever i tried to transport the infocube i came across the following errors. But good thing is that all my object related to cube is in active mode. I had used "data flow before" during transportation. Please note that  datasource 0Vtype_text  is not present in the R/3 development either. Is this a serious error or can we proceed further without worrying about it? Please find the following error
    "Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode)   
    DataSource 0VTYPE_TEXT does not exist in source system FGLCLNT850 of version A                    
    Mapping between data source 0VTYPE_TEXT and source system FGLCLNT850 is inconsistent              
    DataSource 0VTYPE_TEXT does not exist in source system FGLCLNT850 of version A                    
    Field LANGU will not be delivered from DataSource 0VTYPE_TEXT in source system FGLCLNT850         
    Field TXTMD will not be delivered from DataSource 0VTYPE_TEXT in source system FGLCLNT850         
    Field TXTSH will not be delivered from DataSource 0VTYPE_TEXT in source system FGLCLNT850         
    Field VALUETYPE will not be delivered from DataSource 0VTYPE_TEXT in source system FGLCLNT850 "    
    Reward point is must for each and every helpful answer.
    Thanks in advance.
    Regards
    Deepak

    Hi Deepak,
    Please go to RSA5--->check this patch
    PI_BASIS                       PI Basis
    >
        0CA_GD                         General DataSources
    ______________>
            0CA_GD-IO                      Master Data for General DataSour
    ____________________>
                0VTYPE_TEXT                       Value Type for Reporting
    Activate this and then replicate this ..
    Hope this helps and dont forget to assign points if this helps
    Regards
    Rahul Bindroo

  • Errors when transporting query

    I face errors when transporting a query.  I have checked the release and import logs and have noticed the following:
    Release Log:
    There are 5 query elements which have been deleted
    Import Log:
    The query is not active only a modified version of the query is present.
    I am creating a new transporting and collecting the objects not including the deleted 5 objects since they do not exist in the dev system.
    The problem that I have is that the majority of the objects are locked in a BEx transport. 
    The only option of unlocking is each of the objects from the BEx transport, locking in my transport.  Is this the way to do this or is there any consequences or a better way?
    Thanks

    Hi
    as you have transport request with all the collected objects, follow the below steps
    1) goto SE03, in left side you will have option "unlock the objects from transport"
    in the next screen give the transport request and execute
    now activate the query once and goto transport connection in RSA1.
    here collect your query into transport request.
    release it and import the same into next system.
    Regards,
    Venkatesh

  • Error when transported to prod 0VTYPE_TEXT

    Hi exp,
    I got the following error when transported to prod 0VTYPE_TEXT
    Transaction 0FZBH7S1AB8H7ZZZZWGAOBGWG2HCBX5T is inactive (cannot be executed)
    Message no. RSTRAN715
    Diagnosis
    The transformation 0FZBH7S1AB8H7ZZZZWGAOBGWG2HCBX5T is inactive (not executable).
    This can be caused, for example, by a change made to the source object or target object of the transformation.
    The transformation connects the source  to the target .
    Procedure
    The transformation must be reactivated.
    so i tried to activate the trasformation in dev and transported,
    now i got the following error
    Target RSDS 0VTYPE_TEXT ECPCLNT118 is not allowed
    Message no. RSTRAN802
    can advice
    kris...

    Hi Meera, shashank,ashish,
    i have an inactive RSDS 0VTYPE_TEXT ECPCLNT118 -> IOBJ 0VTYPE in BI prod
    data source 0VTYPE_TEXT is been activated in R/3 SS and replicated  to BIP as well and its active
    when i tried to delete Transformations and DTP, the trnsport req failed with errors throw the message
    PSA /BIC/B0000649 does not exist in log.
    i observe that even though request failed with errors, DTP still deleted but not transformations.
    one thing i found,
    I wont be able to find 0VTYPE_TEXT (Value Type for Reporting (Texts)) under the info object 0VTYPE.
    is this error cause?
    i did collected all objects and transported, still errors throwing the folling messages
    No rule exists
    Target RSDS 0VTYPE_TEXT ECPCLNT118 is not allowed
    Transaction 0FZBH7S1AB8H7ZZZZWGAOBGWG2HCBX5T is inactive (cannot be executed)
    Error saving Data Transfer Process DTP_D5R4V8ZJAVNAOZTO2Z9J1JTCI
    thank you for advice,
    krish...

  • Error when transporting ODS Object

    Hi All,
    I got the following error when transporting ODS object.
    "The creation of the export DataSource failed"
    "RFC connection to source system QB1CLNT100 is damaged ==> no Metadata upload"
    "Error when creating the export DataSource and dependent Objects. Error when activating ODS Object 0FIGL_O10"
    Maybe somebody can help me.
    Thanks a lot and appreciate that,
    -Martin-

    hi Martin,
    check oss note 597326 - Activating ODS: Error when creating the export DataSource
    Symptom
    When you activate or transport ODS objects, the following errors appear in the log:
    "The creation of the export DataSource failed". Message number RSBM 035
    "Error &1 in function module &2". Message number RSBM 006
    "<b>Error when creating the export DataSource and dependent Objects</b>". Message number RSDODSO 169
    "Error when activating the ODS object &1". Message number RSDODSO 168
    Other terms
    RSBM 035, RSBM 006, RSDODSO 169, RSDODSO 168
    Reason and Prerequisites
    A characteristic involved is active but it is using new or inactive attributes.
    Characteristics involved are all characteristics used in the ODS object.
    Solution
    Check all characteristics involved as described in the following:
    Check the Compounding and Attributes tabs in the characteristics maintenance.
    All characteristics here must be active. This is displayed by a green icon.
    If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
    After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.

  • Error when transporting object data

    Hi,
    i have installed version 7.1 over verison 7 azdobe livecycle designer, howeven after installation, i try to made some changes, but i got the following error
    :" error when transporting object data", anyone familiar with this error?
    Please help. Thanks

    1) It seems that you have deleted a dependent info object from ODS in BW Dev. and so is the warning message that you have deleted that info object.
    2) if you have made some changes in an ODS and want to transport those to quality then you should delete all data from that ODS in quality. Delete all tables in ODS.
    3) You should activate update rules in development again and transport those with this request.
    Error 8 is error caused due to missing objects. do check your request thoughly before you re transport it.
    Hope this helps.
    Regards,

  • Error when transporting a transformation (Update rule) BI 7.0

    Error when transporting a transformation (Update rule) BI 7.0
    Hi all,
    I’m trying to transport the transformation between the infocube 0FIGL_C10 and the ODS 0FIGL_010 from BI Dev into BI QAS. I kept getting a return code 12.
    Transport message:
       Program terminated (job: RDDEXECL, no.: 18141700)
       See job log
       Execution of programs after import (XPRA)
       End date and time: 20070620181432
    I go to the log and I got the following message:
    Job started
    Step 001 started (program RDDEXECL, variant, user ID DDIC)
    All DB buffers of application server vrxsapq1 were synchronized
    ABAP/4 processor: ASSERTION_FAILED
    Job cancelled
    I’m using BI 7.0
    I don’t know what it is. Can someone tell what should I do or what I’m missing?
    Thanks a lot
    Regards
    Vic

    Hi Victor,
    check this thread may it solves your problem
    Re: Error during the creation of transport request
    one more thread
    /message/2785863#2785863 [original link is broken]
    cheers
    Sunil
    Message was edited by:
            Sunil John

  • Deployment Error when transporting to TEST server

    Hi experts,
    I'm having a deployment error when transporting my dc from development server to test server using the Change Management Service - Transport Studio.
    In the error message, there is the mention of the following sentence:
    =============================================
    Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine ?
    =============================================
    But the dc is using only the standard default dcs like:
    com.sap.aii.proxy.framework (default)
    com.sap.aii.util.misc (default)
    com.sap.exception (default)
    com.sap.mw.jco (default)
    tc/cmi (default)
    tc/ddic/ddicruntime (default)
    td/ddic/metamodel/content (default)
    tc/logging (default)
    tc/wd/webdynpro (default)
    tc/wdp/metamodel/content (default)
    So could these dcs not have been deployed on the test server ?
    How do we confirm this ?
    Thanks in advance.
    Rgds,
    Daniel

    A dump of the exception i m getting.
    Anyone has a clue or advice of how to overcome this problem ?
    20081107165952 Info   :Nov 7, 2008 4:46:03 PM   Info: Starting: Update: Selected development component 'appl/main'/'com.diagonal'/'dev_devcias_C'/'823'/'0' updates currently deployed development component 'appl/main'/'com.diagonal'/'LOKAL'/'0.2006.01.12.14.18.23'/'0'.
    20081107165952 Info   :Nov 7, 2008 4:46:03 PM   Info: SDA to be deployed: /usr/sap/WS5/JC00/SDM/root/origin/com.diagonal/appl/main/dev_devcias_C/0/823/appl~main.sda
    20081107165952 Info   :Nov 7, 2008 4:46:03 PM   Info: Software type of SDA: J2EE
    20081107165952 Info   :Nov 7, 2008 4:46:03 PM   Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
    20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Begin of log messages of the target system:
    20081107165952 Info   :08/11/07 16:46:03 -  ***********************************************************
    20081107165952 Info   :08/11/07 16:46:04 -  Start updating EAR file...
    20081107165952 Info   :08/11/07 16:46:04 -  start-up mode is lazy
    20081107165952 Info   :08/11/07 16:46:04 -  EAR file updated successfully for 70ms.
    20081107165952 Info   :08/11/07 16:46:04 -  Start updating...
    20081107165952 Info   :08/11/07 16:46:06 -  EAR file uploaded to server for 861ms.
    20081107165952 Info   :08/11/07 16:46:07 -  ERROR: Not updated. Deploy Service returned ERROR:
    20081107165952 Info   :                     java.rmi.RemoteException: Cannot deploy application com.diagonal/appl~main..
    20081107165952 Info   :                     Reason: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:
    20081107165952 Info   :                          com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
    20081107165952 Info   :                          at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:681)
    20081107165952 Info   :                          at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1278)
    20081107165952 Info   :                          at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:313)
    20081107165952 Info   :                          at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199)
    20081107165952 Info   :                          at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
    20081107165952 Info   :                          at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    20081107165952 Info   :                          at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    20081107165952 Info   :                          at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    20081107165952 Info   :                          at java.security.AccessController.doPrivileged(AccessController.java:215)
    20081107165952 Info   :                          at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
    20081107165952 Info   :                          at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    20081107165952 Info   :                     Caused by: com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
    20081107165952 Info   :                          at com.sap.engine.services.webdynpro.WebDynproContainer.deploy(WebDynproContainer.java:1050)
    20081107165952 Info   :                          at com.sap.engine.services.webdynpro.WebDynproContainer.makeUpdate(WebDynproContainer.java:1281)
    20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.UpdateTransaction.makeComponents(UpdateTransaction.java:400)
    20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:321)
    20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.UpdateTransaction.begin(UpdateTransaction.java:164)
    20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
    20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
    20081107165952 Info   :                          at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3184)
    20081107165952 Info   :                          at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:669)
    20081107165952 Info   :                          ... 10 more
    20081107165952 Info   :                     For detailed information see the log file of the Deploy Service.
    20081107165952 Info   :08/11/07 16:46:07 -  ***********************************************************
    20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: End of log messages of the target system.
    20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
    20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Error: Aborted: development component 'appl/main'/'com.diagonal'/'dev_devcias_C'/'823'/'0', grouped by :
    20081107165952 Info   :Caught exception during application deployment from SAP J2EE Engine's deploy service:
    20081107165952 Info   :java.rmi.RemoteException: Cannot deploy application com.diagonal/appl~main..
    20081107165952 Info   :Reason: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:
    20081107165952 Info   :     com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
    20081107165952 Info   : (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
    20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Starting to save the repository
    20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Finished saving the repository
    20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Starting: Update: Selected software component 'CIAS_WD_APPLICATIONS'/'diagonal.com'/'dev_devcias_C'/'1000.1.0.6.0.20081107075633''/'0' updates currently deployed software component 'CIAS_WD_APPLICATIONS'/'diagonal.com'/'dev_devcias_C'/'1000.1.0.0.0.20061122075934''/'1'.
    20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Error: Aborted: software component 'CIAS_WD_APPLICATIONS'/'diagonal.com'/'dev_devcias_C'/'1000.1.0.6.0.20081107075633''/'0':
    20081107165952 Info   :Failed deployment of SDAs:
    20081107165952 Info   :development component 'appl/main'/'com.diagonal'/'dev_devcias_C'/'823'/'0' : aborted
    20081107165952 Info   :Please, look at error logs above for more information!
    20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Starting to save the repository
    20081107165952 Info   :Nov 7, 2008 4:46:08 PM   Info: Finished saving the repository
    20081107165952 Info   :Nov 7, 2008 4:46:08 PM   Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
    20081107165952 Info   :Nov 7, 2008 4:46:08 PM   Error: -
    At least one of the Deployments failed -
    20081107165952 Info   :end of log
    20081107165952 Info   :RC of deployment: 12
    20081107165952 Info   :Step SDM-deploy ended with result 'fatal error' ,stopping execution at 2008-11-07 16:59:52.0155 +9:00

  • Error when transporting

    Hi,
    I got a error when transport,
    I have Activated Infoobjectfrom BC then attr and text then created transformation,DTP and infopackege for respective DS in one request then I have relesed the request from SE09 then Imported in Q systm,
    Then I got error, so whr exactly i gone wrong could any one  expln
    I am getting fowlling error
    Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS
    InfoSource 0BP_IND_SECTOR_ATTR is not available in source system Qxxxxxxxxxx
    Error when activating DataSource 0BP_IND_SECTOR_ATTR Qxxxxxxxx
    Regards,
    Swapna

    Hi,
    Have you replicated the 0BP_IND_SECTOR_ATTR DataSource in your Q system? For this you will have to first transport the above R/3 DataSource (and all other DataSources that you have activated in R/3 Dev) from R/3 Dev to R/3 Q. After that, you may manually replicate this DataSource in BW Q from R/3 Q. Then retransport your original BW request. That should do the trick.
    Hope this helps
    Sandeep

  • Error when tranporting a cube

    Hi all,
    I am having a problem when I try to transport a cube, the log in the order says:
    Start of the after-import method RS_CUBE_AFTER_IMPORT for object type(s) CUBE (Modo activación)
    Action canceled
    The user terminated processing of objects
    The user terminated processing of objects
    Error when activating InfoCubo ZTC_C11
    End of after import methode RS_CUBE_AFTER_IMPORT (Modo activación) - runtime: 00:00:07
    Start of the after-import method RS_CUBE_AFTER_IMPORT for object type(s) CUBE (Modo de borrado)
    End of after import methode RS_CUBE_AFTER_IMPORT (Modo de borrado) - runtime: 00:00:00
    Errors occurred during post-handling RS_AFTER_IMPORT for CUBE L
    RS_AFTER_IMPORT belongs to package RS
    The errors affect the following components:
       BW-WHM (Warehouse Management)
    As you can see the log it doesn't say enought information about the error. We are in BI 7.01 Enh 06.
    The only object in the transport is the Cube ZCT_C11. Do you know what it could be happening?
    Regards, Federico

    Hi again,
    I tried to activate the cube with program RSDG_CUBE_ACTIVATE with the following configuration:
    InfoCube type = 'B'
    Object Version = 'M'
    InfoCube = ZTC_C11
    And after some verification a pop up appears with the following message:
    "Error in Object Editing: Invalid call sequence for interfaces when recording changes"
    Message no. TK425
    Diagnosis
    The function you selected uses interfaces to record changes made to your objects in requests and tasks.
    Before you save the changes, a check needs to be carried out to establish whether the objects may be changed. This check must be performed before you begin to make changes.
    System Response
    The function terminates.
    Procedure
    The function you have used must correct the two Transport Organizer interfaces required. Contact your system administrator.
    I click on OK, and then other pop up appears:
    "Error when activating; Please analyze log"
    And it takes me to the Log, where it says there was a "Problem class important"
    Action canceled
    The user terminated processing of objects
    Error when activating InfoCube ZTC_C11
    As you can see, It says the same written in transport log.
    What else can I do?
    Thanks in advance, Federico

  • Error when transporting transfer rules

    Hi, i got an error when i transport transfer rules. i got the following errors in various transfer rules:
    Mapping between data source 0CUSTOMER_ATTR and source system EMP300 is inconsistent
    AND
    Reference to transfer structure 0CUSTOMER_ATTR_BB not available. No activation possible.
    I tried to activate the data sources and transport them several times, but i got the same errors. Checking manually i can see the data sources active in my source system, in development and productive instances.
    Thanks in advance.
    Diego Lombardini

    Hello Diego
    Do you choose the correct Transfer Structure in DEV?
    I mean the one that is assigned to EMP300.
    Are you saying that your PROD have the following:
    0customer_text_BA
    And that your DEV only have the following:
    0customer_text_BB
    If the answer to the above questions is YES;
    Find out if some one has assigned ATTR to 0CUSTOMER directly in PROD or somebody has changed 0CUSTOMER_ATTR in DEV without transporting it to PROD.
    I think that one way to resolve this problem is to use the option "overwrite origanls" in STMS.
    Use it with caution and do not mass transport when you use this option.
    Good luck
    /FZA
    Message was edited by: Fariborz Zangoui
    Message was edited by: Fariborz Zangoui

  • Error when transporting 0MATERIAL Infoobject to Production server

    Hi,
    When I am transporting 0MATERIAL to production I am getting this error
    "Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
    An exception with the type CX_RS_SQL_ERROR occurred, but was neither handled locally, nor declared in a RAISING clause
    SQL Error: ORA-00904: 'RF_FRECHAR': invalid identifier
    Error when activating InfoObject 0MATERIAL
    Characteristic 0MATERIAL is blocked by conversion "
    Transport is working fine in Quality, only in Production I am getting error.
    I haven't yet started pulling data in production.
    Please help. Its urgent.
    Thanks
    Shilpa

    Look at master data table related to your IO in se11 transaction.
    Check if the data element for your 0material field is active.
    <i>Check the data element in ABAP Dictionary. Activate data element there, and, if necessary, check the activation log.</i>

  • The Creation of Export DataSource Failed Error while transporting ODS Cube

    Hi  All,
    I am facing this issue from last 1 week.. i had developed an ODS cube in APO-DP BW which will fetch data from SAP R/3 and its working fine in APO Dev Server.  But when i transport this cube into APO PAC(Prodn Server) the below error i am getting..
       Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)
       The creation of the export DataSource failed
       Password logon no longer possible - too many failed attempts
       Password logon no longer possible - too many failed attempts
       Error when creating the export DataSource and dependent Objects
       Error when activating DataStore Object ZANAUTSL
    I also updated the transport conversion tables but still problem not resolved.
    Immediate help is hightly appreciated.
    Thanx
    AJ

    Hi AJ,
    Looking at your error, it seems that the RFC user's password is locked and hence connectivity from R/3 towards APO BW is broken.
    You know the name of your export datasource (from R/3 to APO BW). Find out the name of your R/3 source system e.g. PACCLT000, by scrolling to the right against teh export data source.
    Take help of your Basis or EAI team to identify the RFC destination corresponding to the connectivity from the R/3 source system (PACCLT000) to your APO BW system. (If needed ask for help from your BW team, I am not very sure how connectivity would be set up from R/3 to APO BW, I guess this would be independent from CIF connectivity)
    For this RFC connection from R/3 to APO BW, see which RFC user is maintained in SM59 in APO and ask your security team to reset (or unlock) the password of this RFC user in R/3, and then if required update the user password details in SM59 in APO also.
    After this, your issue should get resolved.
    Thanks - Pawan

  • Error when transporting an Openhub to QA

    hi guys I did some enhancements on two open hubs (added a couple of fields on each one). I updated the transformations as well and everything worked fin on DEV system. Activated everything and then moved to QA, but then I got an error in the transport system:
    Database table /BIC/OHYOPR_FCST contains data and cannot be deleted
    Error during creation of DDIC sources of Open Hub Destination YOPR_FCST
    Error when activating Open Hub Destination YOPR_FCST
    The same error for each of the open hubs..
    Any ideas of how can I solve this issue?
    Mauro.

    The error msg clearly says that you need to drop data on target YOPR_FCST in target client otherwise it keeps failing when you do transport.
    you can drop the data SE14 - /BIC/OHYOPR_FCST* - Edit - Select option Delete data and press 'Activate and Adjust Database.
    and Re-Import

  • Error while transporting the cube

    Hi all,
    While I was transporting my cube from Development box to Acceptance box, following error occured.
       Execution of programs after import (XPRA)
       Transport request   : GCDK905220
       System              : NCA
       tp path             : /usr/sap/NCA/DVEBMGS01/exe/tp
       Version and release: 372.04.10 700
       Post-import methods for change/transport request: GCDK905220
          on the application server: bdhp4684
       Post-import method RS_AFTER_IMPORT started for CUBE L, date and time: 20080802045222
       Program terminated (job: RDDEXECL, no.: 04522200)
          See job log
       Execution of programs after import (XPRA)
       End date and time : 20080802045237
       Ended with return code:  ===> 12 <===
    Actually transport failed but the cube was present in the Acceptance box in inactive state
    Please help me for the same.
    With thanks and regards
    Mukul Singhal

    Hi Mukul,
    This is an RC=12 issue.Contact the basis team or raise ticket basis team stating that your specified transport request is got terminated.Basis team will resolve the issue and then you can Import the transport into your acceptance system.
    I hope it will help you.
    Regards
    Suresh B.G.

Maybe you are looking for

  • Weblogic Server 8.1 giving weird error while deploying EJB

    Hi All, I am using weblogic8.1 server with service pack 4. I am trying to deploy an entitybean (ejb2.0) specification. I am getting following error. ========================================================== [Deployer:149033]preparing application sum

  • FB 4.7 Mobile

    I am currently using FB 4.7 with AIR 3.4 and 3.5 (both tested). (just starting with FB4.7 moving from 4.6) When I run the application or AIR Simulator, iOS Simulator and android device, the app Y position does not start on 0. It reports it on 0 (in t

  • Please support CameraRoll properly on Android

    With some dismay I just tested AIR 16 beta to find that the CamerRoll problems have not been addressed in any way. It still can't load Picassa images on older versions of Android and is comprehensively broken on Android 5. As it is I'm about to relea

  • Downpayment on assets

    Hi gurus, Your opnion is required regarding GL entry that is created whenever downpayment is made against an asset for which proper PR and PO was raised from MM side. Downpayments are done with M indicator and we use F-48 to pay vendor advances. PO i

  • Where is my System folder?

    I just had a new hard drive installed, and then installed Leopard myself, and when I select the hard drive icon under DEVICES in the finder window, only 2 folders appear: "Developer" and "User". Where are my Applications, Library, and System folders?