Error when transport LSMW project

Error description:
When set up LSMW project in develop system, it is all right. But when transport to production system, its file path shows wrong. It looks the same as in Develop system. Now We delete the file path in P-System and re-create new file path the same as before, it can work. How could we solve this problem?
Thank you.

Hi,
LSMW is a transaction, which will let you mass upload almost any other transaction (FB01, FD01, AS91, etc.). You do it in the following way: 
1. Enter into transaction LSMW (no menu path), possibly in a development / test system 
2. First, define a project, subproject and object (relatively formal task). 
3. On the horizontal menu, go to Goto -> Recordings. Click on "Create recording". 
4. Enter the name and description of recording (freely definable). 
5. I cannot simulate this now in my system, but SAP will ask you about transaction code (AS02) and will take you into the AS02 transaction. In this step, do the change manually. Make sure you "touch" (change / write something) in all fields which you want to update. 
6. Once you are done, save the recording and return on the start page of LSMW. Click "Execute". 
7. You will see a list of tasks. Do them one by one. They should be relatively simple (and I cannot help you with them). Important is step 3 (maintain source fields) - here you define the columns of your excel (csv) file in the particular order. In step 5 (field mapping and conversion rule), you assign file columns to SAP fields (note that you will see only those fields which you "touched" during recording). You need to go through all the steps. In the end, you get (and run) a batch session. 
8. <b>If you did this in a development system, transport the LSMW object (menu Extras - Export project, Extras - Import project). You have to do it via file, not via standard transports of configuration (it is perhaps more simple). </b>
Make sure you test it first in development or quality system! 
Pls reward points if useful.
Regards,
Ameet

Similar Messages

  • Problem in Transporting LSMW project

    Hi,
    We created LSMW project in development environment. Then we created Transport request through menue <b>Extras -> <u>C</u>reate Change Request</b>
    We successfully transported this request to test environment. When status is checked through STMS_IMPORT everything was fine. However when we tried to open project through LSMW, it didn't exist.
    Can anyone suggest, what could have gone wrong ?
    Nishad

    Hi,
    if your problem is not allready solved.
    You can not transport LSMW-Project - I do not know what this icon is for.
    You have to export the project and than import on the new system.
    use these icons.
    best regards

  • Error when transporting a transformation (Update rule) BI 7.0

    Error when transporting a transformation (Update rule) BI 7.0
    Hi all,
    I’m trying to transport the transformation between the infocube 0FIGL_C10 and the ODS 0FIGL_010 from BI Dev into BI QAS. I kept getting a return code 12.
    Transport message:
       Program terminated (job: RDDEXECL, no.: 18141700)
       See job log
       Execution of programs after import (XPRA)
       End date and time: 20070620181432
    I go to the log and I got the following message:
    Job started
    Step 001 started (program RDDEXECL, variant, user ID DDIC)
    All DB buffers of application server vrxsapq1 were synchronized
    ABAP/4 processor: ASSERTION_FAILED
    Job cancelled
    I’m using BI 7.0
    I don’t know what it is. Can someone tell what should I do or what I’m missing?
    Thanks a lot
    Regards
    Vic

    Hi Victor,
    check this thread may it solves your problem
    Re: Error during the creation of transport request
    one more thread
    /message/2785863#2785863 [original link is broken]
    cheers
    Sunil
    Message was edited by:
            Sunil John

  • Errors when transporting query

    I face errors when transporting a query.  I have checked the release and import logs and have noticed the following:
    Release Log:
    There are 5 query elements which have been deleted
    Import Log:
    The query is not active only a modified version of the query is present.
    I am creating a new transporting and collecting the objects not including the deleted 5 objects since they do not exist in the dev system.
    The problem that I have is that the majority of the objects are locked in a BEx transport. 
    The only option of unlocking is each of the objects from the BEx transport, locking in my transport.  Is this the way to do this or is there any consequences or a better way?
    Thanks

    Hi
    as you have transport request with all the collected objects, follow the below steps
    1) goto SE03, in left side you will have option "unlock the objects from transport"
    in the next screen give the transport request and execute
    now activate the query once and goto transport connection in RSA1.
    here collect your query into transport request.
    release it and import the same into next system.
    Regards,
    Venkatesh

  • Error when transported to prod 0VTYPE_TEXT

    Hi exp,
    I got the following error when transported to prod 0VTYPE_TEXT
    Transaction 0FZBH7S1AB8H7ZZZZWGAOBGWG2HCBX5T is inactive (cannot be executed)
    Message no. RSTRAN715
    Diagnosis
    The transformation 0FZBH7S1AB8H7ZZZZWGAOBGWG2HCBX5T is inactive (not executable).
    This can be caused, for example, by a change made to the source object or target object of the transformation.
    The transformation connects the source  to the target .
    Procedure
    The transformation must be reactivated.
    so i tried to activate the trasformation in dev and transported,
    now i got the following error
    Target RSDS 0VTYPE_TEXT ECPCLNT118 is not allowed
    Message no. RSTRAN802
    can advice
    kris...

    Hi Meera, shashank,ashish,
    i have an inactive RSDS 0VTYPE_TEXT ECPCLNT118 -> IOBJ 0VTYPE in BI prod
    data source 0VTYPE_TEXT is been activated in R/3 SS and replicated  to BIP as well and its active
    when i tried to delete Transformations and DTP, the trnsport req failed with errors throw the message
    PSA /BIC/B0000649 does not exist in log.
    i observe that even though request failed with errors, DTP still deleted but not transformations.
    one thing i found,
    I wont be able to find 0VTYPE_TEXT (Value Type for Reporting (Texts)) under the info object 0VTYPE.
    is this error cause?
    i did collected all objects and transported, still errors throwing the folling messages
    No rule exists
    Target RSDS 0VTYPE_TEXT ECPCLNT118 is not allowed
    Transaction 0FZBH7S1AB8H7ZZZZWGAOBGWG2HCBX5T is inactive (cannot be executed)
    Error saving Data Transfer Process DTP_D5R4V8ZJAVNAOZTO2Z9J1JTCI
    thank you for advice,
    krish...

  • Deployment Error when transporting to TEST server

    Hi experts,
    I'm having a deployment error when transporting my dc from development server to test server using the Change Management Service - Transport Studio.
    In the error message, there is the mention of the following sentence:
    =============================================
    Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine ?
    =============================================
    But the dc is using only the standard default dcs like:
    com.sap.aii.proxy.framework (default)
    com.sap.aii.util.misc (default)
    com.sap.exception (default)
    com.sap.mw.jco (default)
    tc/cmi (default)
    tc/ddic/ddicruntime (default)
    td/ddic/metamodel/content (default)
    tc/logging (default)
    tc/wd/webdynpro (default)
    tc/wdp/metamodel/content (default)
    So could these dcs not have been deployed on the test server ?
    How do we confirm this ?
    Thanks in advance.
    Rgds,
    Daniel

    A dump of the exception i m getting.
    Anyone has a clue or advice of how to overcome this problem ?
    20081107165952 Info   :Nov 7, 2008 4:46:03 PM   Info: Starting: Update: Selected development component 'appl/main'/'com.diagonal'/'dev_devcias_C'/'823'/'0' updates currently deployed development component 'appl/main'/'com.diagonal'/'LOKAL'/'0.2006.01.12.14.18.23'/'0'.
    20081107165952 Info   :Nov 7, 2008 4:46:03 PM   Info: SDA to be deployed: /usr/sap/WS5/JC00/SDM/root/origin/com.diagonal/appl/main/dev_devcias_C/0/823/appl~main.sda
    20081107165952 Info   :Nov 7, 2008 4:46:03 PM   Info: Software type of SDA: J2EE
    20081107165952 Info   :Nov 7, 2008 4:46:03 PM   Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
    20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Begin of log messages of the target system:
    20081107165952 Info   :08/11/07 16:46:03 -  ***********************************************************
    20081107165952 Info   :08/11/07 16:46:04 -  Start updating EAR file...
    20081107165952 Info   :08/11/07 16:46:04 -  start-up mode is lazy
    20081107165952 Info   :08/11/07 16:46:04 -  EAR file updated successfully for 70ms.
    20081107165952 Info   :08/11/07 16:46:04 -  Start updating...
    20081107165952 Info   :08/11/07 16:46:06 -  EAR file uploaded to server for 861ms.
    20081107165952 Info   :08/11/07 16:46:07 -  ERROR: Not updated. Deploy Service returned ERROR:
    20081107165952 Info   :                     java.rmi.RemoteException: Cannot deploy application com.diagonal/appl~main..
    20081107165952 Info   :                     Reason: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:
    20081107165952 Info   :                          com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
    20081107165952 Info   :                          at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:681)
    20081107165952 Info   :                          at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1278)
    20081107165952 Info   :                          at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:313)
    20081107165952 Info   :                          at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199)
    20081107165952 Info   :                          at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
    20081107165952 Info   :                          at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    20081107165952 Info   :                          at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    20081107165952 Info   :                          at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    20081107165952 Info   :                          at java.security.AccessController.doPrivileged(AccessController.java:215)
    20081107165952 Info   :                          at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
    20081107165952 Info   :                          at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    20081107165952 Info   :                     Caused by: com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
    20081107165952 Info   :                          at com.sap.engine.services.webdynpro.WebDynproContainer.deploy(WebDynproContainer.java:1050)
    20081107165952 Info   :                          at com.sap.engine.services.webdynpro.WebDynproContainer.makeUpdate(WebDynproContainer.java:1281)
    20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.UpdateTransaction.makeComponents(UpdateTransaction.java:400)
    20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:321)
    20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.UpdateTransaction.begin(UpdateTransaction.java:164)
    20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
    20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
    20081107165952 Info   :                          at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3184)
    20081107165952 Info   :                          at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:669)
    20081107165952 Info   :                          ... 10 more
    20081107165952 Info   :                     For detailed information see the log file of the Deploy Service.
    20081107165952 Info   :08/11/07 16:46:07 -  ***********************************************************
    20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: End of log messages of the target system.
    20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
    20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Error: Aborted: development component 'appl/main'/'com.diagonal'/'dev_devcias_C'/'823'/'0', grouped by :
    20081107165952 Info   :Caught exception during application deployment from SAP J2EE Engine's deploy service:
    20081107165952 Info   :java.rmi.RemoteException: Cannot deploy application com.diagonal/appl~main..
    20081107165952 Info   :Reason: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:
    20081107165952 Info   :     com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
    20081107165952 Info   : (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
    20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Starting to save the repository
    20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Finished saving the repository
    20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Starting: Update: Selected software component 'CIAS_WD_APPLICATIONS'/'diagonal.com'/'dev_devcias_C'/'1000.1.0.6.0.20081107075633''/'0' updates currently deployed software component 'CIAS_WD_APPLICATIONS'/'diagonal.com'/'dev_devcias_C'/'1000.1.0.0.0.20061122075934''/'1'.
    20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Error: Aborted: software component 'CIAS_WD_APPLICATIONS'/'diagonal.com'/'dev_devcias_C'/'1000.1.0.6.0.20081107075633''/'0':
    20081107165952 Info   :Failed deployment of SDAs:
    20081107165952 Info   :development component 'appl/main'/'com.diagonal'/'dev_devcias_C'/'823'/'0' : aborted
    20081107165952 Info   :Please, look at error logs above for more information!
    20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Starting to save the repository
    20081107165952 Info   :Nov 7, 2008 4:46:08 PM   Info: Finished saving the repository
    20081107165952 Info   :Nov 7, 2008 4:46:08 PM   Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
    20081107165952 Info   :Nov 7, 2008 4:46:08 PM   Error: -
    At least one of the Deployments failed -
    20081107165952 Info   :end of log
    20081107165952 Info   :RC of deployment: 12
    20081107165952 Info   :Step SDM-deploy ended with result 'fatal error' ,stopping execution at 2008-11-07 16:59:52.0155 +9:00

  • Error when transporting

    Hi,
    I got a error when transport,
    I have Activated Infoobjectfrom BC then attr and text then created transformation,DTP and infopackege for respective DS in one request then I have relesed the request from SE09 then Imported in Q systm,
    Then I got error, so whr exactly i gone wrong could any one  expln
    I am getting fowlling error
    Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS
    InfoSource 0BP_IND_SECTOR_ATTR is not available in source system Qxxxxxxxxxx
    Error when activating DataSource 0BP_IND_SECTOR_ATTR Qxxxxxxxx
    Regards,
    Swapna

    Hi,
    Have you replicated the 0BP_IND_SECTOR_ATTR DataSource in your Q system? For this you will have to first transport the above R/3 DataSource (and all other DataSources that you have activated in R/3 Dev) from R/3 Dev to R/3 Q. After that, you may manually replicate this DataSource in BW Q from R/3 Q. Then retransport your original BW request. That should do the trick.
    Hope this helps
    Sandeep

  • Error when transporting ODS Object

    Hi All,
    I got the following error when transporting ODS object.
    "The creation of the export DataSource failed"
    "RFC connection to source system QB1CLNT100 is damaged ==> no Metadata upload"
    "Error when creating the export DataSource and dependent Objects. Error when activating ODS Object 0FIGL_O10"
    Maybe somebody can help me.
    Thanks a lot and appreciate that,
    -Martin-

    hi Martin,
    check oss note 597326 - Activating ODS: Error when creating the export DataSource
    Symptom
    When you activate or transport ODS objects, the following errors appear in the log:
    "The creation of the export DataSource failed". Message number RSBM 035
    "Error &1 in function module &2". Message number RSBM 006
    "<b>Error when creating the export DataSource and dependent Objects</b>". Message number RSDODSO 169
    "Error when activating the ODS object &1". Message number RSDODSO 168
    Other terms
    RSBM 035, RSBM 006, RSDODSO 169, RSDODSO 168
    Reason and Prerequisites
    A characteristic involved is active but it is using new or inactive attributes.
    Characteristics involved are all characteristics used in the ODS object.
    Solution
    Check all characteristics involved as described in the following:
    Check the Compounding and Attributes tabs in the characteristics maintenance.
    All characteristics here must be active. This is displayed by a green icon.
    If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
    After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.

  • Error when transporting object data

    Hi,
    i have installed version 7.1 over verison 7 azdobe livecycle designer, howeven after installation, i try to made some changes, but i got the following error
    :" error when transporting object data", anyone familiar with this error?
    Please help. Thanks

    1) It seems that you have deleted a dependent info object from ODS in BW Dev. and so is the warning message that you have deleted that info object.
    2) if you have made some changes in an ODS and want to transport those to quality then you should delete all data from that ODS in quality. Delete all tables in ODS.
    3) You should activate update rules in development again and transport those with this request.
    Error 8 is error caused due to missing objects. do check your request thoughly before you re transport it.
    Hope this helps.
    Regards,

  • IDOC error when using LSMW+XIF to load business partner data

    Hi experts,
        i have configured the LSMW using idoc type 'CRMXIF_PARTNER_SAVE01', but it gives somes errors like below (LSMW_BP456 is the BP no)
    E  Partner LSMW_BP456 (4A01EE5D47261621E10000000A0A0ACB ): the following err
    W Partner data processed with key PartnerGUID 4A01EE5D47261621E10000000A0A0
    W Partner data processed with key PartnerID LSMW_BP456
    E No update is defined for BP role 000000
    E Validation error occurred: Module CRM_BUPA_MAIN_VAL , BDoc type BUPA_MAIN
    E Error status 'A ' calling validation service
    In fact i have loaded product succesfully using this interface, so i am sure the basic setting is done for XIF interface.
    And i found the error messages come when executing below code in fm 'CRMXIF_PARTNER_SAVE' in debug mode. I am not very familiar with BDOC and it seems that the error occured when processing bdoc.
    call MW flow service synchronous (error handled by caller)*
      IF lv_callmode = 'S' OR lv_callmode IS INITIAL.
        CALL METHOD cl_smw_mflow=>validate
    Any advice ? thanks

    Hi,
    I have looked into the issue. If you are trying to create the BP with general role 000000, i think it might not be possible via LSMW.
    The error message is correct, because role 000000 is indeed not relevant for update because if you can see in the customising Tx BUSD, 'FLAG - Do not update' will be active. This is the reason why you are getting the error message of 'No update is defined for the role 000000'.
    When you insert a partner in role "000000 General Business Partner",the error message "BP role cannot be updated" will be returned. This error message is very specific for this issue. You can create BP in different roles apart from the general role.
    Indeed if you try to change the 'Do not update' flag to inactive state and process the LSMW project you will be able to create the BP but it is strictly not recommended.
    This role is a technical role which exists for the creation of BP, and immediately you will fall back to other roles available for the partner.
    So i feel you need to change the role before you create BP with this role via LSMW.
    I hope this helps.
    Regards,
    Venkat

  • Help:  Error when using LSMW (Recording Object Type)

    Dear all,
       I encountered an error when using "Batch Input Recording" way in LSMW,which is as follows:
    I have recorded the transaction MM01 and the source structure and data mapping.When dealing
    with "Specify Files",the error comes out with message
    --> "File Name 'Converted Data':Max.45 Characters:Remaining saved". 
    and the subsequent steps cannot be maintained due to the error.

    Alex,
    The name of file for Converted data is a system generated combination of your Project subproject and object followed by lsmw.conv  as   Project_Subproject_Object.lsmw.conv
    System has set a limit of a maximum of 45 characters. It the file name exceeds 45 characters, the system will throw the error.
    Just rename the file such that it is with in the 45 charcter limit....you will be fine
    Hope this helps
    Vinodh Balakrishnan

  • Error when transporting transfer rules

    Hi, i got an error when i transport transfer rules. i got the following errors in various transfer rules:
    Mapping between data source 0CUSTOMER_ATTR and source system EMP300 is inconsistent
    AND
    Reference to transfer structure 0CUSTOMER_ATTR_BB not available. No activation possible.
    I tried to activate the data sources and transport them several times, but i got the same errors. Checking manually i can see the data sources active in my source system, in development and productive instances.
    Thanks in advance.
    Diego Lombardini

    Hello Diego
    Do you choose the correct Transfer Structure in DEV?
    I mean the one that is assigned to EMP300.
    Are you saying that your PROD have the following:
    0customer_text_BA
    And that your DEV only have the following:
    0customer_text_BB
    If the answer to the above questions is YES;
    Find out if some one has assigned ATTR to 0CUSTOMER directly in PROD or somebody has changed 0CUSTOMER_ATTR in DEV without transporting it to PROD.
    I think that one way to resolve this problem is to use the option "overwrite origanls" in STMS.
    Use it with caution and do not mass transport when you use this option.
    Good luck
    /FZA
    Message was edited by: Fariborz Zangoui
    Message was edited by: Fariborz Zangoui

  • Error when transporting 0MATERIAL Infoobject to Production server

    Hi,
    When I am transporting 0MATERIAL to production I am getting this error
    "Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
    An exception with the type CX_RS_SQL_ERROR occurred, but was neither handled locally, nor declared in a RAISING clause
    SQL Error: ORA-00904: 'RF_FRECHAR': invalid identifier
    Error when activating InfoObject 0MATERIAL
    Characteristic 0MATERIAL is blocked by conversion "
    Transport is working fine in Quality, only in Production I am getting error.
    I haven't yet started pulling data in production.
    Please help. Its urgent.
    Thanks
    Shilpa

    Look at master data table related to your IO in se11 transaction.
    Check if the data element for your 0material field is active.
    <i>Check the data element in ABAP Dictionary. Activate data element there, and, if necessary, check the activation log.</i>

  • Error while exporting LSMW Project

    Hi friends,
    while exporting LSMW project, one error file : "sapfewdll_01_0003_00_2024_1636.err.trc" gets created with the following MSG -
    Error(03.10.06 13:40:23.278): Data sent from backend exceeds buffer size!
    Please Help
    Regards
    Sonal

    http://www.javamonamour.org/2011/11/updated-version-of-importpy-and.html
    click on build.xml and you will see the right jars

  • Error when transporting query: "... is missing in version M..."

    Hi experts
    I have some problems due to a transportation of a query and a webtemplate. I hope that some of your guys can help me out.
    Please let me know if you need more log information than shown below.
    Regards,
    Torben
    Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)                                     |
           Error when activating element 458IE51VAGKXDZ5O2IPZI09W7                                                                             |
          Element 44LODF3U77ZTZAUT2N59KRITZ is missing in version M                                                                           |
          Element 44LODFQVS3SYJ6H5K5CAEXEZB is missing in version M                                                                           |
          Element 44LOGSQ6F3PUW6SPGO7ORV6ZB is missing in version M                                                                           |
          Element 44LOGSXUY2BKETC5MIA11X5P3 is missing in version M                                                                           |
          Error when activating element 458IYKYNVMEMVGH33X0ES79JR                                                                             |
          Element 44LODF3U77ZTZAUT2N59KRITZ is missing in version M                                                                           |
          Element 44LODFQVS3SYJ6H5K5CAEXEZB is missing in version M                                                                           |
          Error when activating element .....

    Hi Torben,
    When a query/web template is to be transported , one has to select grouping of only necessary objects ( presuming data targets/ info objects are already transported) . And click on transport it will put all required objects in to single request.
    Alternatively you can check table RSZELTTXT for findiing out meaning ful name of elements like 44LODF3U77ZTZAUT2N59KRITZ and try to manuaaly include in the transport request and transport the objects.
    Hope that helps.
    Regards
    Kapadia
    ***Assigning points is the way to say thanks in SDN.***

Maybe you are looking for