Error when transporting datasource and transformation from DEV to QA

I'm attempting to transport a DataSource that was converted to 7.0 from 3.x along with its transformation to QA I receive the following log error. I've most post in regards to very similar errors but nothing showing 'Errors occurred during post-handling RS_AFTER_IMPORT for RSDS L' what is this?
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
Activation of Objects with Type Transformation
Checking Objects with Type Transformation
Checking Transformation 0R526789C2X70Q5XBGCAQ0G3Y4Q7LV9A
No rule exists
Saving Objects with Type Transformation
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Delete Mode)
Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for RSDS L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
   BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for RSDS L, date and time: 20071018113149
Post-import methods of change/transport request D30K913684 completed
     Start of subsequent processing ... 20071018113116
     End of subsequent processing... 20071018113149
Execute reports for change/transport request: D30K913684
Reports for change/transport request D30K913684 have been executed
     Start of................ 20071018113149
     End of.................. 20071018113149
Execution of programs after import (XPRA)
End date and time : 20071018113149
Ended with return code:  ===> 8 <===

Hi Davis,
Before transporting transformation make sure either of source or target should availble in target system.
suppose you have a transformation between Data source and Data Target, first transport Data source, then transport Transformation along with data target.
Before tansporting Transformation either source or target should be avaialble in QA system..then only transportation will happen smoothly..
Hope this helps.
regards
SK

Similar Messages

  • Transport Questions and Questionnaires from Dev to QAS or to PRD

    Question
    How do we transport questions and questionnaires from dev to QAS or to PRD. Do you type all them again or there is process no. What is best process others do
    Answer
    As you must be aware, Questionnaires are updated from a Recruiter start page in the front end which cannot be saved in a change request.
    At least Iu2019m not aware of any other way to move the Questionnaire details across clients.
    I know that it is quite a bit of a task to repeat the activity of maintaining questions and response in questionnaire/s across clients, particularly When you have to maintain big questionnaires (with lots of questions & multiple responses).But As it is , Process templates, Questionnaires have been considered as a recruiters day-to-day administration task in SAP which has to be done from the front end even in live environment
    Any body has soloution ?
    Thanks.
    Saquib
    http://aspirehr.com/HCM_solutions/hcm_solutions.asp

    Hi Vishal,
    As you must be aware, Questionaires are updated from a Recruiter start page in the front end which cannot be saved in a change request.
    Atleast i'm not aware of any other way to move the Questionnnaire details across clients.
    i know that it is quite a bit of a task to repeat the activity of maintaining questions and response in questionnaire/s across clients, particularly When you have to maintain big questionnaires (with lots of questions & multiple responses).But As it is , Process templates, Questionnnaires have been considered as a recruiters day-to-day administration task in SAP which has to be done from the front end even in live environment.
    So if you are a part of the Implementation Consulting team, it is your responsibility to train the core team in doing the activity in live environment. Hope this information helps.
    Best regards
    G Raj

  • Error while transporting Planning board profiles from Dev to QA

    Hi All,
    I have created planning board profile by copying an already existing Non-Standard profile.
    The Profile is working fine in Dev and i am able to see all the charts and Graphical objects as per the settings in the profile.
    But when i transport the profile to QA, it is giving error SAPBARC with text "Illegal number of columns in Chart". I checked what setting have been transported, and found that many of the setting have not been transported for the profile.
    Also tried to move all the profiles, thinking, there might be some dependcy among them. But the problem still persists.
    Awaiting for help...
    Thanks in advance..:).

    Hi Davis,
    Before transporting transformation make sure either of source or target should availble in target system.
    suppose you have a transformation between Data source and Data Target, first transport Data source, then transport Transformation along with data target.
    Before tansporting Transformation either source or target should be avaialble in QA system..then only transportation will happen smoothly..
    Hope this helps.
    regards
    SK

  • I have transport Infoset and Query from DEV to QAS

    Dear Expert,
    I have created an Infoset and Query. My Infoset and My Query have been copied to Query Global Areas and have been transport to QAS server. (I have created Request Transport, the number request is generated by system in DEV)
    But when I look with tcode SQ01 and SQ02 in QAS, there are none of my infoset or query appeared.
    Please, what should I do?
    Best regards,
    Dedy.W

    Check wether yr request transported correctly since these type of requests generally locked..
    After removing lock only we can transport these..
    Check in quality..
    Tcode.. STMS
    Check here for yr request wether transported or not..

  • Error when transporting a transformation (Update rule) BI 7.0

    Error when transporting a transformation (Update rule) BI 7.0
    Hi all,
    I’m trying to transport the transformation between the infocube 0FIGL_C10 and the ODS 0FIGL_010 from BI Dev into BI QAS. I kept getting a return code 12.
    Transport message:
       Program terminated (job: RDDEXECL, no.: 18141700)
       See job log
       Execution of programs after import (XPRA)
       End date and time: 20070620181432
    I go to the log and I got the following message:
    Job started
    Step 001 started (program RDDEXECL, variant, user ID DDIC)
    All DB buffers of application server vrxsapq1 were synchronized
    ABAP/4 processor: ASSERTION_FAILED
    Job cancelled
    I’m using BI 7.0
    I don’t know what it is. Can someone tell what should I do or what I’m missing?
    Thanks a lot
    Regards
    Vic

    Hi Victor,
    check this thread may it solves your problem
    Re: Error during the creation of transport request
    one more thread
    /message/2785863#2785863 [original link is broken]
    cheers
    Sunil
    Message was edited by:
            Sunil John

  • Error when transporting

    Hi,
    I got a error when transport,
    I have Activated Infoobjectfrom BC then attr and text then created transformation,DTP and infopackege for respective DS in one request then I have relesed the request from SE09 then Imported in Q systm,
    Then I got error, so whr exactly i gone wrong could any one  expln
    I am getting fowlling error
    Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS
    InfoSource 0BP_IND_SECTOR_ATTR is not available in source system Qxxxxxxxxxx
    Error when activating DataSource 0BP_IND_SECTOR_ATTR Qxxxxxxxx
    Regards,
    Swapna

    Hi,
    Have you replicated the 0BP_IND_SECTOR_ATTR DataSource in your Q system? For this you will have to first transport the above R/3 DataSource (and all other DataSources that you have activated in R/3 Dev) from R/3 Dev to R/3 Q. After that, you may manually replicate this DataSource in BW Q from R/3 Q. Then retransport your original BW request. That should do the trick.
    Hope this helps
    Sandeep

  • Error with transporting datasource

    Hello,
    I have an issue activating a datasource. I created a generic datasource called 'ZHIP_TD_CLOSE_INV_BALANCE' within BW - i.e the source is BI and NOT R/3. I created transformation from datasource to Cube and loaded data. Everything is working fine. Now when I transport the datasource from Dev to Quality the transport failed. The error log says 'InfoSource ZHIP_TD_CLOSE_INV_BALANCE is not available in source system WP1CLNT310' & 'Error when activating DataSource ZHIP_TD_CLOSE_INV_BALANCE WP1CLNT310'. I do not have an infosource to begin with. So then when I go and try to activate the datasource in Quality, I get the same message i.e. 'InfoSource ZHIP_TD_CLOSE_INV_BALANCE is not available in source system WP1CLNT310'. How do I fix the error and get the transports through? Remember, the existing config works fine in Dev. Thanks for your help in advance.
    Thanks
    Nisha

    what objects are you trying to transport along with the data source ? If you have transfer rules along with this request then might be you would get this error. Also check if your source conversion is maintained correctly. you can check that in RSA1 > Tools > Conversion of Source system names.
    Here maintain the system conversion. Once done, recreate a transport request with only data source and transport. Once done replicate and  transport your other objects.

  • Error while transporting Datasources in Production

    Dear All,
    I have facing a problem while transporting objects pertaining to BI Cockpit in Production.
    Earlier I had transported all the obects (in more than one transports) in Quality (from Development). After testing the objects, I had imported the same number of transports (and in the same order) to Production and now some of the requests have ended in errors like:
    DataSource 0TCTWHMTFM_TEXT does not exist in source system PW1CLNT003 of version A
    Such errors have occured for most of the Datasources.
    Can anyone let me know
    1) Why the transports have failed while importing in Production when similar requests have been transported successfully to Quality.
    2) The possible solution to correct the error.
    Request your kind help to overcome this problem.
    Regards
    Shalabh

    Dear All,
    Thanks for your kind reply.
    There are no R/3 Datasources involved. Our BI Cockpit landscape is based upon only BI system. No data transfer to take place between R/3 and BI.
    Secondly, you mean to say that I need to replicate my Source system in Production and then proceed with the transporting of the requests from Dev to Prod.
    But I never did the same in Quality while transporting from Dev. Is it that it might have been done in Quality beforehand by someone ?
    Also, when the Datasources have not been transported to Production (resulting in error) then how can i replicate these datasources in Production ???
    Let me know if I have not understood correctly.
    Many thanks again for your efforts.
    /Shalabh

  • Errors when transporting query

    I face errors when transporting a query.  I have checked the release and import logs and have noticed the following:
    Release Log:
    There are 5 query elements which have been deleted
    Import Log:
    The query is not active only a modified version of the query is present.
    I am creating a new transporting and collecting the objects not including the deleted 5 objects since they do not exist in the dev system.
    The problem that I have is that the majority of the objects are locked in a BEx transport. 
    The only option of unlocking is each of the objects from the BEx transport, locking in my transport.  Is this the way to do this or is there any consequences or a better way?
    Thanks

    Hi
    as you have transport request with all the collected objects, follow the below steps
    1) goto SE03, in left side you will have option "unlock the objects from transport"
    in the next screen give the transport request and execute
    now activate the query once and goto transport connection in RSA1.
    here collect your query into transport request.
    release it and import the same into next system.
    Regards,
    Venkatesh

  • Unable to transport Integratin Builder objects from Dev to QA correctly

    Hi,
    System : Pi 711 SPS03
    SLD 7.1 with  latest model and content
    We are trying to transport Integration Builder Objects from Dev to QAS, but the SID translation from DEV to QAS is not working.
    The interface is being imported as the source SID.
    We checked the SLD configuration for Transport targets, that is when we realised the below issue.
    Unable to Assign Business Systems in respective Business System Groups
    The expected configuration of the SLD is as below:
    UKD_400  - Integration Server for Dev PI 711 server
    INTEGRATION_SERVER_UKQ - Integration Server for QAS PI 711 server
    XI_QA - Business System Group for all Quality Systems in the landscape
              1) UKD_400
              2) UC1_ECC_60
              3) UED_400
    XI_DEV - Business System Group for all Developement Systems in the landscape
              1) INTEGRATION_SERVER_UKQ
              2) UC2_400
              3) UEQ_400
    We are unable to put the business systems in their respective groups
    All the Business systems are either being assigned in XI_QA or XI_DEV
    Please let us know if this is a product error in SLD 7.1, could not find any relevant notes
    Thanks,
    Govind
    Edited by: Govind Prathi on Feb 12, 2010 10:25 PM
    Edited by: Govind Prathi on Feb 12, 2010 10:27 PM

    We  have already  assinged the Integration server to their respective business system groups while creating the Business system groups.
       BSG: XI_DEV --> UKD_400( Integration Server DEV )
      BSG : XI_QA  ---> INTEGRATION_SERVER_UKQ( Integration Server QA)
    As per documentation, the business systems should be automatically assigned to their respective Groups based on their association with Integration Server.
    But, we are not seeing this behaviour, both the Integration servers are being assigned to the same Business System Group.
    Please help me understand if i am something in the configurations.
    Thanks
    Govind

  • Process chain transport in BI7.0 from DEV system to PROD system

    Hi experts,
    I have to create a process chain of master data loading, and i have created the process chain in DEV system, now i want the same in the production system, can you please suggest me which way i do
    1) create the same process chain in Production system directly or,
    2) should i transport the same process chain to production system, i created in the development system.
    and please tell me that what kind of problems in future i will face by following the above steps when the project will be in support state.
    thanks in advance for all your expertise experienced help.

    It is always advisable to transport the process  chain from DEV to Production. You can just do this by simply gather all the necessary objects for process chain into your transport.
    During the support phase, you have to monitor the data load through process chain. That can be done via transaction code rspcm. In case there is any error in the process chain ( various errors can be there, data loading error, delta error). In that case you have to go to the step of the process chain when the error occurs (it will be marked as red) , rectify the error and process the step manually at the point so that the following process finishes.
    Hope this is clear now.

  • Error when transported to prod 0VTYPE_TEXT

    Hi exp,
    I got the following error when transported to prod 0VTYPE_TEXT
    Transaction 0FZBH7S1AB8H7ZZZZWGAOBGWG2HCBX5T is inactive (cannot be executed)
    Message no. RSTRAN715
    Diagnosis
    The transformation 0FZBH7S1AB8H7ZZZZWGAOBGWG2HCBX5T is inactive (not executable).
    This can be caused, for example, by a change made to the source object or target object of the transformation.
    The transformation connects the source  to the target .
    Procedure
    The transformation must be reactivated.
    so i tried to activate the trasformation in dev and transported,
    now i got the following error
    Target RSDS 0VTYPE_TEXT ECPCLNT118 is not allowed
    Message no. RSTRAN802
    can advice
    kris...

    Hi Meera, shashank,ashish,
    i have an inactive RSDS 0VTYPE_TEXT ECPCLNT118 -> IOBJ 0VTYPE in BI prod
    data source 0VTYPE_TEXT is been activated in R/3 SS and replicated  to BIP as well and its active
    when i tried to delete Transformations and DTP, the trnsport req failed with errors throw the message
    PSA /BIC/B0000649 does not exist in log.
    i observe that even though request failed with errors, DTP still deleted but not transformations.
    one thing i found,
    I wont be able to find 0VTYPE_TEXT (Value Type for Reporting (Texts)) under the info object 0VTYPE.
    is this error cause?
    i did collected all objects and transported, still errors throwing the folling messages
    No rule exists
    Target RSDS 0VTYPE_TEXT ECPCLNT118 is not allowed
    Transaction 0FZBH7S1AB8H7ZZZZWGAOBGWG2HCBX5T is inactive (cannot be executed)
    Error saving Data Transfer Process DTP_D5R4V8ZJAVNAOZTO2Z9J1JTCI
    thank you for advice,
    krish...

  • Error when transporting object data

    Hi,
    i have installed version 7.1 over verison 7 azdobe livecycle designer, howeven after installation, i try to made some changes, but i got the following error
    :" error when transporting object data", anyone familiar with this error?
    Please help. Thanks

    1) It seems that you have deleted a dependent info object from ODS in BW Dev. and so is the warning message that you have deleted that info object.
    2) if you have made some changes in an ODS and want to transport those to quality then you should delete all data from that ODS in quality. Delete all tables in ODS.
    3) You should activate update rules in development again and transport those with this request.
    Error 8 is error caused due to missing objects. do check your request thoughly before you re transport it.
    Hope this helps.
    Regards,

  • Error when applying a XSLT transformation: No valid XSLT pro

    Dear All,
    I am getting following error when opening the "General Supplier Data" from Pre-Select Supplier.
    Error Message: "Error message: Error when applying a XSLT transformation: No valid XSLT program supplied"
    I have already read the related threads on SDN and checked the SAP Note 883896 and others. Even tried running the program UXS_DEL_NAVIGATION_NODE and UXS_ADD_MISSING_XSLT_NAME. But not able to solve the issue.
    Kindly Help.
    Regards,
    Sagar

    Hi Masa,
    Thanks for reply. I have checked this note. As note suggests, S_DEVELOP auth object is assigned to the user. and it has value *.
    Do I need to check anything else?
    Regards,
    Sagar

  • Error when applying a XSLT transformation

    central instance
    transaction SURVEY
    Extras->Target Group Hierarchy-> Import from file
    select file
    Error when applying a XSLT transformation
    dialog instance working

    Hello Andrey Kuryanov,
    Could make sure you describe the problem more clear as much as you can so that community can help you better.
    Please provide more details with more detailed steps and actual error messge.
    Thanks
    Raja Pamireddy
    Moderator

Maybe you are looking for

  • How can I delete a iCloud Mail backup

    I originaly setup iCloud backup to include Mail. it now takes up 14 GB in my iCloud. How can I delete the "Mail" backup from the iCloud and just retain the "Backup"

  • How to change objects in object library?

    I saved an object in the object library and used it as parent object to create some subclass objects in several form modules. Now I want to modify the object in the object library so all the subclass objects can inherit the changes made in the parent

  • How to implement Line number in JTextArea

    Hi I have seen some JTextArea with Line numbers How to do it Thankx

  • Online number constantly engaged

    My online number is constantly engaged, it's been live for 12 hours now......think I want a refund.... Any ideas what's wrong? Solved! Go to Solution.

  • Help with combining pictures

    I am totally PSE8 illiterate.  Is it possible to take, for example, a picture of my 4 year old grandaughter and put my younger granddaughter's face (from a different picture) into it?