Error when transporting transfer rules

Hi, i got an error when i transport transfer rules. i got the following errors in various transfer rules:
Mapping between data source 0CUSTOMER_ATTR and source system EMP300 is inconsistent
AND
Reference to transfer structure 0CUSTOMER_ATTR_BB not available. No activation possible.
I tried to activate the data sources and transport them several times, but i got the same errors. Checking manually i can see the data sources active in my source system, in development and productive instances.
Thanks in advance.
Diego Lombardini

Hello Diego
Do you choose the correct Transfer Structure in DEV?
I mean the one that is assigned to EMP300.
Are you saying that your PROD have the following:
0customer_text_BA
And that your DEV only have the following:
0customer_text_BB
If the answer to the above questions is YES;
Find out if some one has assigned ATTR to 0CUSTOMER directly in PROD or somebody has changed 0CUSTOMER_ATTR in DEV without transporting it to PROD.
I think that one way to resolve this problem is to use the option "overwrite origanls" in STMS.
Use it with caution and do not mass transport when you use this option.
Good luck
/FZA
Message was edited by: Fariborz Zangoui
Message was edited by: Fariborz Zangoui

Similar Messages

Error in Transporting Transfer rule/structure to Q for generic DS

Hi,
We're in NW2004s. we're getting error when we transport Transfer Rules and Structure of generic data sources to Q.
In R3 Q the DS is active and it pulls data in RSA3 and it is replicated and all the fields are available in BW side as well, but when we transport TR/TS i still get error saying the Datasource is not active. This happens only for generic ones.
Any idea.
thanks
Mayil

Hi,
have you inserted both the transfer rule and the communication structure in the same change request?
When you transport an InfoSource, all it's dependent objects must be present in the same change request; in this way the datasource will be activated.
I hope it helps you,
Vito

BI Content Error when activating transfer rule / SAPSQL_ARRAY_INSERT_DUPREC

Hello Experts,
when i want to iinstall the transfer rule /CRMBW/OLTP_OPPORTUNITY_ITEM
from Data Source /CRMBW/OLTP_OPPORTUNITY_ITEM to InfoSource
/CRMBW/OPPORTUNITY_I (all Business Content Objects) Iam facing the following situation:
1. When I use "Simulate Installation" i get the warning for all of the fields: Field APP_SERVER is not supported by DataSource /CRMBW/OLTP_OPPORTUNITY_ITEM in source system SLOGICOCRM. Transfer rules were deleted however, delivered.
2. When I use "Installation" i get a dump of the following type:
    Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC
    Except.                     CX_SY_OPEN_SQL_DB
    Error in the ABAP Application Program
    The current ABAP program "CL_RSAR_FORMULAS==============CP" had to be
     terminated because it had come across a statement that unfortunately cannot be executed.
    More details of the dump are:
    Trigger Location of Exception
    Program                                 CL_RSAR_FORMULAS==============CP
    Include                                 CL_RSAR_FORMULAS==============CM00E
    Row                                     40
    Module type                         (METHOD)
    Module Name                       GENERATE_ACTIVE_VERSION
The problem is, i can not map the transfer rule by myself because the the transfer structure contains some important Routines and Formulas which are missing in thereports and i dont know the source code they are using.
Can anybody help me?
Greetings from Barcelona
Oliver
Edited by: STRATESYS CONSULTING on Jul 23, 2009 2:35 PM

Hi Oliver,
Can you please check if you can use the SAP notes 1263075 and 985052 to resolve the problem?
Best Regards,
Des

Error when activate transfer rule 0DISTR_CHAN

Hi dear all,
I''ve a quesiton urgent, plz.
I've activated IO 0DISTR_CHAN, so his flow before and after. I went to load master data, but I found his transfer rule isn't yet activated. I tried to activated it but a error message like:
Error generating program
Message no. RSAR245
Diagnosis
An error occurred in the program generation:
Program / Template:   RSTMPL80
Error code / Action: 6
Row:        49
Message:    Statement concluding with "...LIKE" ended unexpect
Procedure
If the problem occurred during the data load or transport, activate the transfer rule.
If the problem persists, search in the SAP note system under 'RSAR 245'.
Please help!
Thanks a lot.
Juan

Hi dear all,
Thanks!
I tried to re-install this business content just with flow before. And It works.
Best regards.
Juan

Error when activating transfer rules

Dear Experts,
I am getting the following errors when trying to activate my transfer structure. I am working on a system that has been just upgraded. So, any idea of what the problem could be?
Here is the error:
Mapping between data source 0FI_AR_3 and source system AMC_103 is inconsistent
Message no. RSAOLTP380
Thank you very much.

Hi venkat
Please check the OSS note 606437
Sriram

Error when activating update rule after transporting to QA

Hi,
When we transport Info cubes and update rules along with Process chains. There are the following errors in Transport request(XXXXXXXX).
1. Error when activating update rule 22HSFD3ZMALU46LS0R8PRF2MW
IC=ZSDPCXY2 IS=2LIS_11_VAITM error when checking the update rules
2. Error when activating update rule 7NT4WIDPDCN2ERFDRXIGH95PM
IC=ZSDPCXY2 IS=2LIS_12_VCHDR error when checking the update rules
and etc.
Then we activated and saved all the erroneous update rules in another tranport request(YYYYYYYY) and again we transported alongwith the previous transport request(XXXXXXXX).
The last request(YYYYYYYY)was successfully tranported and still there are same errors in TR(XXXXXXXX).
Quick answers will be highly appreciated.
Regards,
Vijay

Hi Vijay,
Next time you would have transport only (YYYYYYYY). Transport Request (XXXXXXX) was not required to be moved.
Normally Update Rule gets deactivated in QA when any changes to the CUbe/ODS are moved.
Thus either you can transport transport request for only active update rule to QA or activate your UR directly in QA system in case you have authorization to do that.
Regards,
Rohini

Error when transporting a transformation (Update rule) BI 7.0

Error when transporting a transformation (Update rule) BI 7.0
Hi all,
Im trying to transport the transformation between the infocube 0FIGL_C10 and the ODS 0FIGL_010 from BI Dev into BI QAS. I kept getting a return code 12.
Transport message:
   Program terminated (job: RDDEXECL, no.: 18141700)
   See job log
   Execution of programs after import (XPRA)
   End date and time: 20070620181432
I go to the log and I got the following message:
Job started
Step 001 started (program RDDEXECL, variant, user ID DDIC)
All DB buffers of application server vrxsapq1 were synchronized
ABAP/4 processor: ASSERTION_FAILED
Job cancelled
Im using BI 7.0
I dont know what it is. Can someone tell what should I do or what Im missing?
Thanks a lot
Regards
Vic

Hi Victor,
check this thread may it solves your problem
Re: Error during the creation of transport request
one more thread
/message/2785863#2785863 [original link is broken]
cheers
Sunil
Message was edited by:
        Sunil John

Error while transporting update rule.

Hi experts
I am trying to transport one update rule to production..
But it is ending with error code 8 n it is giving me following error :
      Errors when activating update rule XXX
      IC=0PP_DS03 IS=0CO_OM_OPA_6 error when checking update rules
Kindly tell me what need to be done now.
Regards
Swati

Hi Swati,
Before transporting the update rule, in the present scenario, you have to transport the infosource which contains the corresponding "0recordmode".
Whenever you transport anything into the quality or production, the list should be as followed in the given manner :
Seq No     Objects in Request
1     Package(DEVC), InfoArea(AREA), Application Component(APCO)
2     Function Modules
3     Keyfigure Catalog(IOBC), Keyfigures(IOBJ), Units(IOBJ)
4     Characteristic Catalog(IOBC), Characteristic Infoobjects(IOBJ)
5     Infosources (ISCS, ISTD, ISMP, ISTS, ISFS, ROUT) and
                Generic Data Sources(DataSrce Active Version(OSOA), ISMP, ISTS,DataSourceReplica (ISFS)
                and Tables (TABL)
6     Infoproviders(ODS(ODSO), Cube(CUBE), Infoset(ISET))
7     Update Rules(UPDR, ROUT)
8     Infopackages(ISIP)
9     Queries(ELEM)
10     Webtemplates(TMPL, BLTM, BPTM)
Just transport all your things in the above sequence, and it will be done successfully.
Also, remember there should not be any data in the corresponding infoprovider while you transfer the update rule, else it will fail.
Hope it helps,
Regards,
Neha.

Error when activating update rule

HI BI Expert,
The original transfer rule for 2LIS_11_VAITM was deleted accidently and I created new one and mapped with the existing infosource. The system always generates the following error at the time of transport to another client.
Error when activating update rule D1GOAPD9O0P9CFOY8KBSOUDFA
Activation of the update rules for ZO_SOP_1 ZT_SOP_SALO_ITM
IC=ZO_SOP_1 IS=ZT_SOP_SALO_ITM error when checking the update rules.
Would you kindly be able to suggest me what steps I need to take so as to correct this issue?
Thanks.

Hi,
When you say that update rule was accidently deleted, was that attached to transport request and transported to your QA & PRD at that time.
Because it may happen that, your old rules are still there in QA & PRD and the new rules are failing to overwrite that.
If it is the case, then you may have to open the client for QA & PRD and delete the existing update rule (doesnt sound good practice though), and then create a fresh update rule and transport.
Rgds,
Vikram.
Rgds,
Vikram.

Error in Transporting Update Rules

Hi,
I am transporting ODS, Info package and UPdate Rule from Dev to QA.
I request seems to be fine, but transport ended in error.
ODS, IP and UR got transported , but the UR is inactive.
and i dont havr the permission to activate that in QA system.
What could be the reason for inactive UR in QA.

I have done that also,
But it is giving error as :
Error when activating update rule 49U3N0VD2IJOOELH5APVBBIP1
Activation of the update rules for ZFY6_SDT ZIB_SHIPDAILY_TRAN
IC=ZFY6_SDT IS=ZIB_SHIPDAILY_TRAN error when checking the update rules
Start of the after-import method for object type R3TR UPDR (Delete Mode)
Update rules 49U3N0VD2IJOOELH5APVBBIP1 read in version M
Errors occurred during post-handling RS_AFTER_IMPORT for UPDR L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
    BW-WHM (Warehouse Management)
Please help me out, all the dependent objects are present in the QA
Dependent Objects:
Info Objects
ODS
Info Source
Transfer and comm str
Info pacakge

Error when transported to prod 0VTYPE_TEXT

Hi exp,
I got the following error when transported to prod 0VTYPE_TEXT
Transaction 0FZBH7S1AB8H7ZZZZWGAOBGWG2HCBX5T is inactive (cannot be executed)
Message no. RSTRAN715
Diagnosis
The transformation 0FZBH7S1AB8H7ZZZZWGAOBGWG2HCBX5T is inactive (not executable).
This can be caused, for example, by a change made to the source object or target object of the transformation.
The transformation connects the source to the target .
Procedure
The transformation must be reactivated.
so i tried to activate the trasformation in dev and transported,
now i got the following error
Target RSDS 0VTYPE_TEXT ECPCLNT118 is not allowed
Message no. RSTRAN802
can advice
kris...

Hi Meera, shashank,ashish,
i have an inactive RSDS 0VTYPE_TEXT ECPCLNT118 -> IOBJ 0VTYPE in BI prod
data source 0VTYPE_TEXT is been activated in R/3 SS and replicated to BIP as well and its active
when i tried to delete Transformations and DTP, the trnsport req failed with errors throw the message
PSA /BIC/B0000649 does not exist in log.
i observe that even though request failed with errors, DTP still deleted but not transformations.
one thing i found,
I wont be able to find 0VTYPE_TEXT (Value Type for Reporting (Texts)) under the info object 0VTYPE.
is this error cause?
i did collected all objects and transported, still errors throwing the folling messages
No rule exists
Target RSDS 0VTYPE_TEXT ECPCLNT118 is not allowed
Transaction 0FZBH7S1AB8H7ZZZZWGAOBGWG2HCBX5T is inactive (cannot be executed)
Error saving Data Transfer Process DTP_D5R4V8ZJAVNAOZTO2Z9J1JTCI
thank you for advice,
krish...

"Error when activating update rule" after changing ODS key

Hi Gurus,
I have problem when transporting in productive system an existing ODS & the update rule linked. The message is : "Error when activating update rule".
This is when i move one field from the key to a simple field of the ODS.
Before transporting requests, i deleted data in the ODS by right-click on ODS --> Request tab --> select the request --> click on delete....
I don't understand because i did the same in Qual environment and everything is OK : transport request & ODS loading...
Please help.....

Hello,
Please try to check/perform the following steps:
1- You must ensure for the update rule have mapping between infosources
   and ODS/CUBEs correct, this means that also these objects need
   to be of the same version in the source system of the transport as in
   target system.
2- Please ensure all infoobjects in the cube are active.Please
   reactivate all the objects again in source system.
3- Ensure all infoobjects are found in the communication structure.
4- Please try to collect the update rule via BW transport connection
   with the grouping option "only necessary objects" and then transport
   those objects again.
Could you please reactivate the infocube and its update rules again
and then create a new transport for this infocube and transport it
again.
Best regards,
Paula Csete

Error while migrating transfer rules

Hi all,
When migrating <b>2LIS_02_SCL</b> transfer rules to transforamtions I got a shotdump "ASSERTION_FAILED in 'CL_RSTRAN_TEMPLATE->CREATE_ROUTINE" for this I have implemented Snote : 986199 after this when I am migrating transforamtions are getting created but showing syntax errors (for this transfer rules there are standard routines ) .Can anyone help me to sort out this issue.
Regards
KK

Hello,
unfortunately not all transfer rules can be migrated automatically.The migration of the business content transformation is done on customer project base. This means some of the adjustments needs to be done manually.
Please adjust the rules to the ABAP OO compliance.
This how to paper should help:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fc61e12d-0a01-0010-2883-e2fc63ef729b
and
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e73bfc19-0e01-0010-23bc-ef0ad53f2fab
I hope this helps.
Michael

Error when transpotring Update Rules

Dear colleagues.
When transporting an update Rules into our Quality enviroment the system pops up the following error:
IC=ZWEPP_C02 IS=ZWE_BOM_RMX_IS syntax error: rows 0.
I've verified the Update Rules on the Quality System and everything is correct but it remains inactive due to the transport fails.
I would appreciate your feedback.
Thanks in advance.

Dear khaja.
I send you the transport log as well as the Return Code.
Error when activating update rule 5MYASZMBOIQZSRR60674OBKJ3
IC=ZWEPP_C02 IS=ZWE_BOM_RMX_IS error when generating InfoCube Update program
IC=ZWEPP_C02 IS=ZWE_BOM_RMX_IS syntax error: rows 0 (When generating the update program for data target ZWEPP_C02, InfoSource ZWE_BOM_RMX_IS, a syntax error occured in row 0. Message no. RSAU466)
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
Please, let me know if you need anything else.
Thanks.

Problem while transporting transfer rules in BW 3.5

Hi All,
I have a problem while transporting transfer rules in BW 3.5.
I have just checked the box for conversion to Transfer structure / Transfer rules of an infoobject and tried to transport it to quality. I got this below error message:
The selections T ZBW_ZBILLRATP_TEXT_BA specify more than one DataSource
Diagnosis
You need to select an individual DataSource based on the selection conditions
InfoSource =
Source System =
Object Version = T
Transfer Structure = ZBW_ZBILLRATP_TEXT_BA
although the select event is not unique.
Procedure
Check the objects to which the selection applies.
Reference to transfer structure ZBW_ZBILLRATP_TEXT_BA not available. No activation possible.
Message no. RSAR436
Diagnosis
Transfer structure ZBW_ZBILLRATP_TEXT_BA should be transported into this system.
However, no DataSource mapping refers to this transfer structure.
System response
The transfer structure was not activated or deleted.
Procedure
Ensure that DataSource mapping, with a reference to the transfer structure ZBW_ZBILLRATP_TEXT_BA is on the same transport request. Use the transport connection to create a consistent request.
Can any one provide me details of how to overcome this issue. I tried transporting all related objects.
Regards
Lakshmi

Hi Lakshmi,
Befor Transporting the Transfer rules, make sure that you are transporting the Active Versions of your Datasource & DataTarget between which your transfer rules exist.
Also make sure that the Transfer rules are active before it is transported.
Hope it helps!
Regards,
Pavan

Error when transporting transfer rules

Similar Messages

Maybe you are looking for