Error when transporting using CMS

Hi,
Please ssist.
We are on PI 7.0 SP17. We want to transport using CMS from Dev box to Prod system. We get to export steps. Select Mode, able to go pass, Then Select Objects We select them and Click on Finish(at bottom of pop-up screen). "correct mark"Then We get Transport Using CMS. Trnsport request generated and released for transport using CMS, Shoose Tools-> System Messages to display result. Then after a few minutes the screen pops a long message.
"Sent on 11/18/09 at 10:39 AM: CMS (server: http://server:port) cannot export the following transport lists:
Export list (send time = 11/18/09 10:39 AM, component = Default Software Component, ID = e10bf190d41d11dead8f00096bdd826a)
Details: com.sap.aii.util.misc.api.BaseRuntimeException: Reading GDI ... FAILED. Source is not well formed. SAXParseException at line -1, column -1. Details:
Message: Generic Exception:
Stacktrace: com.sap.engine.lib.xml.parser.NestedSAXParserException: Generic Exception: -> com.sap.aii.util.misc.api.BaseRuntimeException: Parsing generic data instance: begin of unexpected element "html"!"
Regards
Scharlotte

Check if it is a password-related issu as mentioned here: Error when defining Xi-track in CMS
Regards,
Abhishek.

Similar Messages

Reg:: Error while XI Transport Using CMS

Hi! SAP Gurus,
I am trying to transport XI Integration Design and Configuration Objects from X42 (DEV) to X44 (Quality).
I want to transport Transport ID Design:5909a730a2fe11dcc8dd001125e7370c
Configuration: 1c3d0c90a30111dcb2c0001125e7370c
I was succefully transported the Design object but while I am transporting the Configuratio Object at First I am moving from X42- CMS and then from CMS-X44.
ERROR 1 :: But once I am Exporting I am getting an acknowledgement message and finally it was moving to CMS. But there in Consolidation TAB it was coming IMPORT FAILED.
But when I tried 6-7 times I sended it successfully and there that objects first went (sits) directly in Change lists of quality server ID Part. From change lists I am transferring to Scenarios by Right clickTransport.
ERROR 2: According to CMS some parameters will be lost in communication channels and in some other objects. while transporting using CMS.
How to recollect that parameters again ?
Will you please confirm simply copying the parameters from Development server and again editing or Is there any other method?
ERROR 3:. While I am activating any object in Configuration object I am getting the error

Unable to move object. Change lists were not part of the same import
Kindly Solve this issue and If Possible send me a brief note and complete procedure of
HOW TO TRANSPORT XI REPOSITORY AND CONFIGURATION OBJECTS USING CMS FROM DEVQAPROD SERVERS?
Hi! Gurus,
My Main Problem is :::
After Exporting from DEV---->CMS---->Quality it will goes to Change Lists of Quality Server QA and after that I am transferring them to Scenarios TAB by Right Clicking --> and Press Transfer..
Problem::: After that When ever I am trying to activate they are not activating I am getting the error::

Unable to move object. Change lists were not part of the same import

Hi! Gurus,
If you have any material with screen shots and also the solution to the above problem kindly send to my Mail ID::[email protected]
Thanks::
Amar Srinivas Eli.

Transport using CMS Export Error on Integration Repository

Hello
We are transporting an maximo-integrate,max60-ERP2004 via export mode
Transport using CMS. Got an error during export. The error says :
"Workspace was not defined for software component version Maximo-
Integrate,MAX60-SAPERP2004 of mro.com
Assign the software component version in the landscape configurator of
the change management service to a track."
As already software component version Maximo in the landscape
configurator of the change management service to a track has been
defined.
The Software component (SWCV) has already been defined on CMS. But still getting the error.
Please advise anybody comes across these type of error.
Thanks & regards
AK

Thanks sumit for reply. Here is the information:
Yes I choose Repository Type : XI
Track ID : IR.ERP
Track Name : IR.ERP
Track Description : ERP System : XI Integration Repository Objects
XI URL Development : http://sap03.ab.energy:50000/rep/
XI URL Consolidation System : http://sap03.ab.energy:50100/rep/
Because we have 2 system landscape.
ADD SWCV
MAXIMO-INTEGRATE mro.com MAX60-SAPERP2004 Source
But on Domain Data:
CMS Name : XID
CMS Description : XID
CMS URL : http://sap03.ab.energy:50000
CMS USER : LSADMIN
CMS Password : XXXXX
Domain ID:XID
Domain Name:XID
Domain Description:XID
SLD URL:http://sap03.ab.energy:50000
All the information is correct. Above thread is not suitable.Then Why I am getting the error message.
Please advise..
Thanks & regards
Sanjay

Error when transporting a transformation (Update rule) BI 7.0

Error when transporting a transformation (Update rule) BI 7.0
Hi all,
Im trying to transport the transformation between the infocube 0FIGL_C10 and the ODS 0FIGL_010 from BI Dev into BI QAS. I kept getting a return code 12.
Transport message:
   Program terminated (job: RDDEXECL, no.: 18141700)
   See job log
   Execution of programs after import (XPRA)
   End date and time: 20070620181432
I go to the log and I got the following message:
Job started
Step 001 started (program RDDEXECL, variant, user ID DDIC)
All DB buffers of application server vrxsapq1 were synchronized
ABAP/4 processor: ASSERTION_FAILED
Job cancelled
Im using BI 7.0
I dont know what it is. Can someone tell what should I do or what Im missing?
Thanks a lot
Regards
Vic

Hi Victor,
check this thread may it solves your problem
Re: Error during the creation of transport request
one more thread
/message/2785863#2785863 [original link is broken]
cheers
Sunil
Message was edited by:
        Sunil John

Could not see Transport using CMS in Integration Directory

Hi,
I have Changed the Parameter setting to true in Integration Builder for Integration Directory and Integration Repository. When i login into Integration Directory i cannot see the option Transport using CMS in Export. I can only see Transport using File system.
Please help me out in configuring the CMS correctly.
Thanks,
Fahad

Hi Fahad,
This thread answers ur question
CMS Transport mode unavailable in Integration Directory
cheers,
Prashanth
P.S Please mark helpful answers

Integration Directory - Transport using CMS does not appear

Hi guys,
I'm having problems with one thing I thought it would be trivial.... I'm not able to get the option 'Transport using CMS' in the Integration Directory available.
I've done the necessary steps on the exchangeProfile in order to transport objects using CMS.
1. Configuring ExchangeProfile
IntegrationDirectory
com.sap.aii.ibdir.core.cms.enableTransportWizard=true
com.sap.aii.ibdir.core.cms.enableClTransport=true
IntegrationRepository
com.sap.aii.ibrep.core.cms.enableClTransport=true
com.sap.aii.ibrep.core.cms.enableTransportWizard=true
Added the values to com.sap.aii.ib.client.properties
u2022 com.sap.aii.ibrep.core.cms., com.sap.aii.ibdir.core.cms.
2. And after, I've created the tracks needed for IntegrationRepository and IntegrationDirectory.
For the IntegrationDirectory I've followed SAP's description:
"You have created an XI track in the Landscape Configurator and entered the addresses of the development, consolidation, and productive directory. There are no software component versions in the Integration Directory. Therefore, for directory transports using the CMS, you specify the software component version SAP-INTDIR 3.0 (EXCHANGE DIRECTORY 3.0). This refers to all configuration objects of the Integration Directory.
Once you have made this setting, you can create transport lists for the CMS. The status of the change lists no longer changes to Closed immediately after their release, but first changes to Transportable."
3. I've restarted the J2EE Server.
When I export the objects from IntegrationRepository everything runs OK, but on the IntegrationDirectory I'm not able to have the option 'Transport Using CMS' available.
I've read several threads on the SDN but none of them solved the problem...
Can anyone give me any hint ?

Hi Sameer,
No luck.... There's nothing similiar to what I'm describing and the points which are mentioned i've already covered them.
Thanks for the tip, I was hoping it could give me a push...
Any ideas...?

"Transport using CMS" option does not appear

Hello Guys
I use CMS for transporting, and it works fine! But today I created a new SWCV, created a Track on CMS to this SWCV too. But when I choose "Export" on IR, the screen that appers does not show the "Transport using CMS" option. Only the "Transporte using File System" option is available for this SWCV.
Any idea?
Thanks in advance
Julio

Hi (and thanks for answering)
The SWCV is in http://host:port/rep/support/admin/index.html, but its name is "Not available"
I did update my domain, but it didnt work at all (the name of the SWCV still is "Not available" and the "Transport using CMS" option didnt appear in IR).
Julio

Deployment Error when transporting to TEST server

Hi experts,
I'm having a deployment error when transporting my dc from development server to test server using the Change Management Service - Transport Studio.
In the error message, there is the mention of the following sentence:
=============================================
Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine ?
=============================================
But the dc is using only the standard default dcs like:
com.sap.aii.proxy.framework (default)
com.sap.aii.util.misc (default)
com.sap.exception (default)
com.sap.mw.jco (default)
tc/cmi (default)
tc/ddic/ddicruntime (default)
td/ddic/metamodel/content (default)
tc/logging (default)
tc/wd/webdynpro (default)
tc/wdp/metamodel/content (default)
So could these dcs not have been deployed on the test server ?
How do we confirm this ?
Thanks in advance.
Rgds,
Daniel

A dump of the exception i m getting.
Anyone has a clue or advice of how to overcome this problem ?
20081107165952 Info   :Nov 7, 2008 4:46:03 PM   Info: Starting: Update: Selected development component 'appl/main'/'com.diagonal'/'dev_devcias_C'/'823'/'0' updates currently deployed development component 'appl/main'/'com.diagonal'/'LOKAL'/'0.2006.01.12.14.18.23'/'0'.
20081107165952 Info   :Nov 7, 2008 4:46:03 PM   Info: SDA to be deployed: /usr/sap/WS5/JC00/SDM/root/origin/com.diagonal/appl/main/dev_devcias_C/0/823/appl~main.sda
20081107165952 Info   :Nov 7, 2008 4:46:03 PM   Info: Software type of SDA: J2EE
20081107165952 Info   :Nov 7, 2008 4:46:03 PM   Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Begin of log messages of the target system:
20081107165952 Info   :08/11/07 16:46:03 - ***********************************************************
20081107165952 Info   :08/11/07 16:46:04 - Start updating EAR file...
20081107165952 Info   :08/11/07 16:46:04 - start-up mode is lazy
20081107165952 Info   :08/11/07 16:46:04 - EAR file updated successfully for 70ms.
20081107165952 Info   :08/11/07 16:46:04 - Start updating...
20081107165952 Info   :08/11/07 16:46:06 - EAR file uploaded to server for 861ms.
20081107165952 Info   :08/11/07 16:46:07 - ERROR: Not updated. Deploy Service returned ERROR:
20081107165952 Info   :                     java.rmi.RemoteException: Cannot deploy application com.diagonal/appl~main..
20081107165952 Info   :                     Reason: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:
20081107165952 Info   :                          com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:681)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1278)
20081107165952 Info   :                          at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:313)
20081107165952 Info   :                          at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199)
20081107165952 Info   :                          at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
20081107165952 Info   :                          at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
20081107165952 Info   :                          at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
20081107165952 Info   :                          at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
20081107165952 Info   :                          at java.security.AccessController.doPrivileged(AccessController.java:215)
20081107165952 Info   :                          at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
20081107165952 Info   :                          at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
20081107165952 Info   :                     Caused by: com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
20081107165952 Info   :                          at com.sap.engine.services.webdynpro.WebDynproContainer.deploy(WebDynproContainer.java:1050)
20081107165952 Info   :                          at com.sap.engine.services.webdynpro.WebDynproContainer.makeUpdate(WebDynproContainer.java:1281)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.UpdateTransaction.makeComponents(UpdateTransaction.java:400)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:321)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.UpdateTransaction.begin(UpdateTransaction.java:164)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3184)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:669)
20081107165952 Info   :                          ... 10 more
20081107165952 Info   :                     For detailed information see the log file of the Deploy Service.
20081107165952 Info   :08/11/07 16:46:07 - ***********************************************************
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: End of log messages of the target system.
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Error: Aborted: development component 'appl/main'/'com.diagonal'/'dev_devcias_C'/'823'/'0', grouped by :
20081107165952 Info   :Caught exception during application deployment from SAP J2EE Engine's deploy service:
20081107165952 Info   :java.rmi.RemoteException: Cannot deploy application com.diagonal/appl~main..
20081107165952 Info   :Reason: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:
20081107165952 Info   :     com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
20081107165952 Info   : (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Starting to save the repository
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Finished saving the repository
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Starting: Update: Selected software component 'CIAS_WD_APPLICATIONS'/'diagonal.com'/'dev_devcias_C'/'1000.1.0.6.0.20081107075633''/'0' updates currently deployed software component 'CIAS_WD_APPLICATIONS'/'diagonal.com'/'dev_devcias_C'/'1000.1.0.0.0.20061122075934''/'1'.
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Error: Aborted: software component 'CIAS_WD_APPLICATIONS'/'diagonal.com'/'dev_devcias_C'/'1000.1.0.6.0.20081107075633''/'0':
20081107165952 Info   :Failed deployment of SDAs:
20081107165952 Info   :development component 'appl/main'/'com.diagonal'/'dev_devcias_C'/'823'/'0' : aborted
20081107165952 Info   :Please, look at error logs above for more information!
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Starting to save the repository
20081107165952 Info   :Nov 7, 2008 4:46:08 PM   Info: Finished saving the repository
20081107165952 Info   :Nov 7, 2008 4:46:08 PM   Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
20081107165952 Info   :Nov 7, 2008 4:46:08 PM   Error: -
At least one of the Deployments failed -
20081107165952 Info   :end of log
20081107165952 Info   :RC of deployment: 12
20081107165952 Info   :Step SDM-deploy ended with result 'fatal error' ,stopping execution at 2008-11-07 16:59:52.0155 +9:00

Error when transporting ODS Object

Hi All,
I got the following error when transporting ODS object.
"The creation of the export DataSource failed"
"RFC connection to source system QB1CLNT100 is damaged ==> no Metadata upload"
"Error when creating the export DataSource and dependent Objects. Error when activating ODS Object 0FIGL_O10"
Maybe somebody can help me.
Thanks a lot and appreciate that,
-Martin-

hi Martin,
check oss note 597326 - Activating ODS: Error when creating the export DataSource
Symptom
When you activate or transport ODS objects, the following errors appear in the log:
"The creation of the export DataSource failed". Message number RSBM 035
"Error &1 in function module &2". Message number RSBM 006
"Error when creating the export DataSource and dependent Objects". Message number RSDODSO 169
"Error when activating the ODS object &1". Message number RSDODSO 168
Other terms
RSBM 035, RSBM 006, RSDODSO 169, RSDODSO 168
Reason and Prerequisites
A characteristic involved is active but it is using new or inactive attributes.
Characteristics involved are all characteristics used in the ODS object.
Solution
Check all characteristics involved as described in the following:
Check the Compounding and Attributes tabs in the characteristics maintenance.
All characteristics here must be active. This is displayed by a green icon.
If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.

Getting errors when iam using BAPI_PO_CREATE1 for Purchase Order creation

Hi sap Gurus,
I am getting Errors when iam using BAPI_PO_CREATE1 for Purchase Order creation that Material (144) does not exist but it is alreardy maintained in MM01.
I dont get how it is coming.and what are the mandatory fields in bapi BAPI_PO_CREATE1 in item level .that is too material only.
pls let me know .
thanks in advance.

Hi,
Check the sample code..
report zpo_test             .
*DATA DECLARATION
constants : c_x value 'X'.
*Structures to hold PO header data
data : header like bapimepoheader ,
headerx like bapimepoheaderx .
*Structures to hold PO account data
data : account like bapimepoaccount occurs 0 with header line ,
accountx like bapimepoaccountx occurs 0 with header line .
*Internal Tables to hold PO ITEM DATA
data : item like bapimepoitem occurs 0 with header line,
itemx like bapimepoitemx occurs 0 with header line,
*Internal table to hold messages from BAPI call
return like bapiret2 occurs 0 with header line,
*Internal table to hold messages from BAPI call
pocontractlimits like bapiesucc occurs 0 with header line.
data : w_header(40) value 'PO Header',
purchaseorder like bapimepoheader-po_number,
delivery_date like bapimeposchedule-delivery_date.
data : ws_langu like sy-langu.
*text-001 = 'PO Header' - define as text element
selection-screen begin of block b1 with frame title text-001.
parameters : company like header-comp_code default '122' ,
doctyp like header-doc_type default 'NB' ,
cdate like header-creat_date default sy-datum ,
vendor like header-vendor default '2000000012' ,
pur_org like header-purch_org default 'PU01' ,
pur_grp like header-pur_group default '005' .
*sociedad like HEADER-COMP_CODE default '122' ,
*vendedor like HEADER-SALES_PERS default 'sale person'.
selection-screen end of block b1.
selection-screen begin of block b2 with frame title text-002.
parameters : item_num like item-po_item default '00010',
material like item-material default '12000000' ,
tipo_imp like item-acctasscat default 'K' ,
*pos_doc like ITEM-ITEM_CAT default 'F' ,
shorttxt like item-short_text default 'PRUEBA BAPI' ,
grup_art like item-matl_group default '817230000' ,
plant like item-plant default '3001' ,
mpe like item-trackingno default '9999' ,
*contrato like ITEM-AGREEMENT default '4904000003' ,
*quantity like ITEM-QUANTITY default 1 .
po_unit like item-po_unit default 'EA'.
selection-screen end of block b2.
Par?mnetros de imputaci?n
selection-screen begin of block b3 with frame title text-004.
parameters : centro like account-costcenter default '1220813150',
cuenta like account-gl_account default '6631400' ,
num_pos like account-po_item default '10' ,
serial like account-serial_no default '01' ,
ind_imp like account-tax_code default 'I2' .
selection-screen end of block b3.
start-of-selection.
*DATA POPULATION
ws_langu = sy-langu. "Language variable
*POPULATE HEADER DATA FOR PO
*HEADER-COMP_CODE = sociedad .
header-doc_type = doctyp .
header-vendor = vendor .
header-creat_date = cdate .
header-created_by = 'TD17191' .
header-purch_org = pur_org .
header-pur_group = pur_grp .
header-comp_code = company .
header-langu = ws_langu .
*HEADER-SALES_PERS = vendedor .
*HEADER-CURRENCY = 'DOP' .
*HEADER-ITEM_INTVL = 10 .
*HEADER-PMNTTRMS = 'N30' .
*HEADER-EXCH_RATE = 1 .
*POPULATE HEADER FLAG.
headerx-comp_code = c_x.
headerx-doc_type = c_x.
headerx-vendor = c_x.
headerx-creat_date = c_x.
headerx-created_by = c_x.
headerx-purch_org = c_x.
headerx-pur_group = c_x.
headerx-langu = c_x.
*HEADERX-sales_pers = c_x.
*HEADERX-CURRENCY = c_x.
*HEADER-ITEM_INTVL = c_x.
*HEADER-PMNTTRMS = c_x.
*HEADER-EXCH_RATE = c_x.
*HEADER-EXCH_RATE = c_x.
*POPULATE ITEM DATA.
item-po_item = item_num.
item-quantity = '1'.
*ITEM-MATERIAL = material .
item-short_text = 'prueba bapi_po_create1'.
*ITEM-TAX_CODE = ''.
item-acctasscat = 'K' .
*ITEM-ITEM_CAT = 'D' .
item-matl_group = '817230000' .
item-plant = '3001' .
item-trackingno = '99999'.
item-preq_name = 'test'.
*ITEM-AGREEMENT = '' .
*ITEM-AGMT_ITEM = ''.
item-quantity = '1' .
item-po_unit = 'EA'.
*ITEM-ORDERPR_UN = 'EA'.
item-conv_num1 = '1'.
item-conv_den1 = '1'.
item-net_price = '1000000' .
item-price_unit = '1'.
item-gr_pr_time = '0'.
item-prnt_price = 'X'.
item-unlimited_dlv = 'X'.
item-gr_ind = 'X' .
item-ir_ind = 'X' .
item-gr_basediv = 'X'.
*ITEM-PCKG_NO = '' .
append item. clear item.
*POPULATE ITEM FLAG TABLE
itemx-po_item = item_num.
itemx-po_itemx = c_x.
*ITEMX-MATERIAL = C_X.
itemx-short_text = c_x.
itemx-quantity = c_x.
*ITEMX-TAX_CODE = C_X.
itemx-acctasscat = c_x.
*ITEMX-ITEM_CAT = c_x.
itemx-matl_group = c_x.
itemx-plant = c_x.
itemx-trackingno = c_x.
itemx-preq_name = c_x.
*ITEMX-AGREEMENT = C_X.
*ITEMX-AGMT_ITEM = c_x.
itemx-stge_loc = c_x.
itemx-quantity = c_x.
itemx-po_unit = c_x.
*ITEMX-ORDERPR_UN = C_X.
itemx-conv_num1 = c_x.
itemx-conv_den1 = c_x.
itemx-net_price = c_x.
itemx-price_unit = c_x.
itemx-gr_pr_time = c_x.
itemx-prnt_price = c_x.
itemx-unlimited_dlv = c_x.
itemx-gr_ind = c_x .
itemx-ir_ind = c_x .
itemx-gr_basediv = c_x .
append itemx. clear itemx.
*POPULATE ACCOUNT DATA.
account-po_item = item_num.
account-serial_no = serial .
account-creat_date = sy-datum .
account-costcenter = centro .
account-gl_account = cuenta .
account-gr_rcpt = 'tester'.
append account. clear account.
*POPULATE ACCOUNT FLAG TABLE.
accountx-po_item = item_num .
accountx-po_itemx = c_x .
accountx-serial_no = serial .
accountx-serial_nox = c_x .
accountx-creat_date = c_x .
accountx-costcenter = c_x .
accountx-gl_account = c_x .
account-gr_rcpt = c_x.
append accountx. clear accountx.
*BAPI CALL
call function 'DIALOG_SET_NO_DIALOG'.
call function 'BAPI_PO_CREATE1'
    exporting
      poheader         = header
      poheaderx        = headerx
    importing
      exppurchaseorder = purchaseorder
    tables
      return           = return
      poitem           = item
      poitemx          = itemx
      poaccount        = account
      poaccountx       = accountx.
*Confirm the document creation by calling database COMMIT
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'
IMPORTING
RETURN =
end-of-selection.
*Output the messages returned from BAPI call
loop at return.
    write / return-message.
endloop.
Regards
Sudheer

Same thing is happening to me. Adobe has not responded to anyone about this error. It appears that Abobe XI is not compatible with IE 11. I do not get this error when I use Chrome or Firefox. Only IE 11 does this. I have tried clearing cache and cookies.

Same thing is happening to me. Adobe has not responded to anyone about this error. It appears that Abobe XI is not compatible with IE 11. I do not get this error when I use Chrome or Firefox. Only IE 11 does this. I have tried clearing cache and cookies. I even uninstalled and re-installed IE 11. It is still doing it. I am surprized that a company like Adobe would just ignore our posts and leave us hanging this this.
Error message is FAILED TO GET DISPATCH FROM IBRWSR2. Then when you click on it the next error message says: PHTML IS NULL. You have to click this error message twice and then the PDF finally loads. Happened every time
Does anyone have a solution since Adobe will not respond?
As a last resort I will try uninstalling the Adobe Reader XI and install Adobe Reader 10 instead. It seems to work ok. But when I try to install version 10 the Adobe site tries to install XI. Any ideas?
JimP08758

It worked just fine for me.
Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

Errors when transporting query

I face errors when transporting a query. I have checked the release and import logs and have noticed the following:
Release Log:
There are 5 query elements which have been deleted
Import Log:
The query is not active only a modified version of the query is present.
I am creating a new transporting and collecting the objects not including the deleted 5 objects since they do not exist in the dev system.
The problem that I have is that the majority of the objects are locked in a BEx transport.
The only option of unlocking is each of the objects from the BEx transport, locking in my transport. Is this the way to do this or is there any consequences or a better way?
Thanks

Hi
as you have transport request with all the collected objects, follow the below steps
1) goto SE03, in left side you will have option "unlock the objects from transport"
in the next screen give the transport request and execute
now activate the query once and goto transport connection in RSA1.
here collect your query into transport request.
release it and import the same into next system.
Regards,
Venkatesh

Error when transported to prod 0VTYPE_TEXT

Hi exp,
I got the following error when transported to prod 0VTYPE_TEXT
Transaction 0FZBH7S1AB8H7ZZZZWGAOBGWG2HCBX5T is inactive (cannot be executed)
Message no. RSTRAN715
Diagnosis
The transformation 0FZBH7S1AB8H7ZZZZWGAOBGWG2HCBX5T is inactive (not executable).
This can be caused, for example, by a change made to the source object or target object of the transformation.
The transformation connects the source to the target .
Procedure
The transformation must be reactivated.
so i tried to activate the trasformation in dev and transported,
now i got the following error
Target RSDS 0VTYPE_TEXT ECPCLNT118 is not allowed
Message no. RSTRAN802
can advice
kris...

Hi Meera, shashank,ashish,
i have an inactive RSDS 0VTYPE_TEXT ECPCLNT118 -> IOBJ 0VTYPE in BI prod
data source 0VTYPE_TEXT is been activated in R/3 SS and replicated to BIP as well and its active
when i tried to delete Transformations and DTP, the trnsport req failed with errors throw the message
PSA /BIC/B0000649 does not exist in log.
i observe that even though request failed with errors, DTP still deleted but not transformations.
one thing i found,
I wont be able to find 0VTYPE_TEXT (Value Type for Reporting (Texts)) under the info object 0VTYPE.
is this error cause?
i did collected all objects and transported, still errors throwing the folling messages
No rule exists
Target RSDS 0VTYPE_TEXT ECPCLNT118 is not allowed
Transaction 0FZBH7S1AB8H7ZZZZWGAOBGWG2HCBX5T is inactive (cannot be executed)
Error saving Data Transfer Process DTP_D5R4V8ZJAVNAOZTO2Z9J1JTCI
thank you for advice,
krish...

Error when transporting

Hi,
I got a error when transport,
I have Activated Infoobjectfrom BC then attr and text then created transformation,DTP and infopackege for respective DS in one request then I have relesed the request from SE09 then Imported in Q systm,
Then I got error, so whr exactly i gone wrong could any one expln
I am getting fowlling error
Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS
InfoSource 0BP_IND_SECTOR_ATTR is not available in source system Qxxxxxxxxxx
Error when activating DataSource 0BP_IND_SECTOR_ATTR Qxxxxxxxx
Regards,
Swapna

Hi,
Have you replicated the 0BP_IND_SECTOR_ATTR DataSource in your Q system? For this you will have to first transport the above R/3 DataSource (and all other DataSources that you have activated in R/3 Dev) from R/3 Dev to R/3 Q. After that, you may manually replicate this DataSource in BW Q from R/3 Q. Then retransport your original BW request. That should do the trick.
Hope this helps
Sandeep

Error when transporting using CMS

Similar Messages

Maybe you are looking for