Error when try to install CPU - Critical Patch Update with OPatch

Hello gurus,
I´m faccing with a problem... After I update the patch set to 10.2.0.4 and install the interim patches for Linux X86_64 now I´m trying to import/install the Oracle Critical Patch Update - Oracle CPU patch!!
I´m trying to import it with OPatch, and I already update this OPatch tool for the last version even before proceeding with installation of Oracle CPU!
I've tried to import it by two methods. The first I tried to apply as described in the relevant README file inside of CPU patch directory, and I used in this case the following command:
redhatsap:orajmd> unzip p9119226_10204_<platform>.zip
redhatsap:orajmd> cd 9119226
redhatsap:orajmd> opatch napply -skip_subset -skip_duplicate
opatch: Command not found
After that previous error, I tried again but now with other method that is described in note 839182 (Installing patches using OPatch) with the following command:
redhatsap:orajmd> cd 9119226
redhatsap:orajmd> $ORACLE_HOME/OPatch/opatch apply
========================================================
GENERIC OPATCH VERSION - FOR USE IN SAP ENVIRONMENT ONLY
========================================================
Invoking OPatch 10.2.0.4.5
Oracle Interim Patch Installer version 10.2.0.4.5
Copyright (c) 2008, Oracle Corporation. All rights reserved.
Oracle Home       : /oracle/JMD/102_64
Central Inventory : /oracle/oraInventory
   from           : /etc/oraInst.loc
OPatch version    : 10.2.0.4.5
OUI version       : 10.2.0.4.0
OUI location      : /oracle/JMD/102_64/oui
Log file location : /oracle/JMD/102_64/cfgtoollogs/opatch/opatch2010-04-19_01-49-17AM.log
Patch history file: /oracle/JMD/102_64/cfgtoollogs/opatch/opatch_history.txt
Failed to load the patch object. Possible causes are:
The specified path is not an interim Patch shiphome
Meta-data files are missing from the patch area
Patch location = /oracle/JMD/102_64/9119226
Details = PatchObject constructor: Input file "/oracle/JMD/102_64/9119226/etc/config/actions" or "/oracle/JMD/102_64/9119226/etc/config/inventory" does not exist.
ApplySession failed: PatchObject constructor: Input file "/oracle/JMD/102_64/9119226/etc/config/actions" or "/oracle/JMD/102_64/9119226/etc/config/inventory" does not exist.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 73
Can you help me please?
Best regards
João Dimas - Portugal

Hello again Joe Bo... and all of others,
I´m with a doubt after installing the CPU patch, which is related to post-installation tasks. I´m in this momment install the SAP System and it was during this installation that sapinst asked me to install the database and all other activities after this installation that are related to the database, for example, the updating of database patches.
At README file in chapter 3.3.2 Post Installation Instructions is described the following:
After installing the patch, perform the following actions:
1.Load modified .sql files into the database, as explained in Section 3.3.2.1.
2.Recompile views in the database, if necessary, as explained in Section 3.3.2.2.
In this momment, as you certainly know, I still don´t have a database because the sap system isn´t yet totally installed (I´m in phase 8 of sapinst wizard).
I only have to do this "Post Installation Tasks" when I have a database, this database will be created after that phase 8 - so now I don´t need to perform the post steps... am I right?
Thanks in advance,
João Dimas - Portugal

Similar Messages

Combining CPU(Critical patch Updates) with Year-End patches, good/bad idea?

Hello all,
I hoping to get some expert opinion on some upcoming patches to our environment. We are 3 releases being on applying CPU's to our environment and it is that time of year where testing is needed for Year-end patches. Does anyone see any issues with combining the year-end and CPU's? Would it be recommended that we hold off on the applying CPU's because of not experiencing any major problems in our environement, then schedule to gradually get up to date once the year-end patches are in place?
The desire to install CPU's is to not fall too far being on the CPU's.
Thanks in advance for any recommendations.

My recommendation is to combine the CPUs with the rest of your patches. CPUs do not affect functionality - they patch security holes/issues in software. Since you will be testing for yearend patches, you can take advantage of this opportunity to also include CPU patches, else separate testing and downtime will be required for the CPU patches. This is the approach we have in our organization. We have yet to encounter an issue with this approach.
HTH
Srini

Why do I get an error when trying to install iTunes 11.4 update?

When I try to install the 11.4 update with Apple Software update it gives me an error at the end and does not install.

Hi olsondan,
If you are having issues installing iTunes for Windows I would suggest that you troubleshoot using the steps in this article -
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks for using Apple Support Communities.
Best,
Brett L

CPU (CRITICAL PATCH UPDATE) AND PATCHSET

when a new bug is fixed in 9.2.0.4, will the bug be addressed in next patch set (9.2.0.5) as well as in the new cpu (CRITICAL PATCH UPDATE) which is going to be released shortly.
kumaresh...

first, there is no cpu for 9204, and also no cpu for 9205 (except for some antique platforms).
second, a cpu does not fix bugs like patchset does. only critical and security related bugs are fixed, so if you have a non-security related bug, you will need a patchset not a cpu.
finally, yes, the patchsets are cumulative. 9205 includes all 9204 fixes
The CPUs are cumulatives too, the fixes for Jan2006 are included in Apr2007. But CPUAPR2007/9205 does not contain the 9206,9207,9208 bug fixes
and the cpu april is already released for most platforms
Message was edited by:
Laurent Schneider

Cpu critical patch update

Please
Can anyone tell me, what is the function of a cpu patch?
I have installed 2 patches one for 9 an other for 9i, but I do not understand why this patch must/should be installed.

Perhaps the description of CPU can help you understand what is CPU about.
Oracle Critical Patch Update - April 2007
Description
A Critical Patch Update is a collection of patches for multiple security vulnerabilities. It also includes non-security fixes that are required (because of interdependencies) by those security patches. Due to the threat posed by a successful attack, Oracle strongly recommends that fixes are applied as soon as possible. This Critical Patch Update contains 36 new security fixes across all products.
also here
http://www.oracle.com/technology/deploy/security/alerts.htm

Error when try to install exchange Server 2013 in windows server 2008 R2 Sp1

Hi
I'm getting these errors while trying to install Microsoft Exchange Server 2013 on my Windows Server 2008 R2 SP1 the user i'm using is the Administrator and it is already a member of "Enterprise
Admins" and "Schema Admins"
in my organization there is 6 Exchange server 2013 in 3 site windows server 2012 in this case
I have to install exchange 2013 in windows Server 2008 r2 sp1
the functional level 2008 R2 I getting these errors please help.
Errors:
This computer doesn't belong to a valid Active Directory site. Check the site and subnet definitions.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.InvalidADSite.aspx
Error:
A reboot from a previous installation is pending. Please restart the system and then rerun Setup.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.RebootPending.aspx
Error:
There is a pending reboot from a previous installation of a Windows Server role or feature. Please restart the computer and then run Setup again.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.PendingRebootWindowsComponents.aspx
Error:
You must be a member of the 'Organization Management' role group or a member of the 'Enterprise Admins' group to continue.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.GlobalServerInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedBridgeheadFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedCafeFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedFrontendTransportFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedMailboxFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedClientAccessFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedUnifiedMessagingFirstInstall.aspx
Error:
Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See the Exchange setup log for more
information on this error.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx
Error:
Either Active Directory doesn't exist, or it can't be contacted.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.CannotAccessAD.aspx

I think it's from subnet in site and services
have 3 site A,B,C and new site is "D"I have problem in "D" site
A subnet is 10.33.50.0/24 AD 2012 ,exchange 2013
B subnet is 10.35.50.0/24 AD 2012 ,exchange 2013
C subnet is 10.36.50.0/24 AD 2012 ,exchange 2013
D subnet is 10.100.100.0/25 AD 2008 ,exchange 2013 error when install it
find event error
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair
the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
test-SetupPrerequisites
{Roles={LanguagePacks, Bridgehead, ClientAccess, UnifiedMessaging, Mailbox, FrontendTransport, Cafe}, LanguagesAvailableToInstall=True, DomainController=, CustomerFeedbackEnabled=True, ExchangeVersion=15.0.847.32, LanguagePackDir=D:\Exchange
Server Software, SufficientLanguagePackDiskSpace=True, ADInitError=Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites
or by rep, ScanType=PrecheckInstall, LanguagePackVersioning=True, HostingDeploymentEnabled=False, TargetDir=C:\Program Files\Microsoft\Exchange Server\V15, SetupRoles={LanguagePacks, AdminTools, Bridgehead, ClientAccess, UnifiedMessaging, Mailbox, FrontendTransport,
Cafe}}

Error when try to install windows 8.1 from UEFI USB

Hello !
I have prepared a UEFI USB flash drive installation for Windows 8.1, as described in this link :
http://www.nextofwindows.com/how-to-make-uefi-bootable-usb-flash-drive-to-install-windows-8/
The computer is on UEFI mode.
Now the computer boot from the USB flash drive, but after some seconds, I get an error message on a blue screen:
Your pc need to be repaired
The application or operating system couldn't be loaded because a required file is missing or contain errors
File \windows\system32\boot\winload.efi
Error code :0xc0000359"
It’s strange because the hard drive has no partitions, and the USB flash drive doesn’t have a path path like
\windows\system32\boot\winload.efi.
What is happening and what should I do?
Thank you !

Hi,
When install Windows on UEFI mode, you need to convert your disk to GPT firstly. Therefore, please check if your disk was already converted to GPT partition style.
On the other hand, you can access to the link below which talking about how to install Windows using UEFI partition style.
https://technet.microsoft.com/en-us/library/dn336946.aspx?f=255&MSPPError=-2147217396
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

'failed to load LENOVO_GetSystemType ' error when try to install or uninstall Presentation Director

It seems like some dll faulty or some program's "Get#####" Funcation failed.
Anyone have ideas how to fix it?

Looking at the AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_myprograminfo led us to the last dll loaded being:
LoadedModule[211]=C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crdb_adoplus_res_en.dll
State[0].Key=Transport.DoneStage1
State[0].Value=1
FriendlyEventName=Stopped working
Scanning the community for "crdb_adoplus_res_en.dll" we got a hot on this issue again:
Failed to load database information. Error in File temp_
From the above we found this:
1. the app.exe.config is all in one package which cannot be separated with the EXE file.
2. the supporting component such as dll files, app.exe.config etc CANNOT be combined into the EXE file
Adding the cr3Test.exe.config to the same folder as the cr3Test.exe RESOLVED the problem on Win 7. It also RESOLVED the problem on Server 2012 R2.
We still need to test on Server 2008 R2 but we are hopeful when that time comes.
Thanks.
Bruce

Error when trying to install the latest iphone update....

during the "preparing iphone for software update" I receive the error message:
"the iphone could not be updated. an unknown error has occurred (1602)

Delete Itunes,quick time player, Apple software update, & Apple mobile device support then reload the latest itunes from apple then try updating the it worked on my phone.

I am running OSX 10.6.8 and when I try to install the latest security update there is an unknown error and the update cannot be implemented. I still have to restart my computer each time I try. Is anyone else experiencing this problem?

I am running OSX 10.6.8 and when I try to install the latest security update there is an unknown error and the update cannot be implemented. I still have to restart my computer each time I try. Is anyone else experiencing this problem?
I tried using the downloaded update. It still didn't work but at least I did not have to restart my computer. The message was a little different too: "The installation failed. The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."

Run through this list of fixes, either something is corrupted or you have malware that's blocking the update.
..Step by Step to fix your Mac
Make sure to backup your users files to a external storage drive first (not only TimeMachine as it may fail to restore) and disconnect, because if' it's a drive corruption/failing then the entire thing will either have to be replaced or a wipe and install done.
Most commonly used backup methods
If you do need to do a wipe and install
How to erase and install Snow Leopard 10.6
For Snow Leopard Speed Freaks

Error occurs when applying pre-install task of patch 9239089

Error occurs when applying pre-install task of patch 9239089
----------------------------------Pre-install Tasks--------------------------------------
4. Use SQL*Plus to run the script:
UNIX:
$ sqlplus /nolog
SQL> @$ORACLE_HOME/appsutil/admin/adgrants.sql <APPS schema name>
----------------------------------error message---------------------------------------
End of Creating PL/SQL Package AD_DBMS_METADATA.
DECLARE
ERROR at line 1:
ORA-20000: ORA-00933: SQL command not properly endedError in
ad_grants.Give_grants
ORA-06512: at line 685
Commit complete.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Thanks,
Jackie

Jackie,
$ sqlplus /nolog
SQL> @$ORACLE_HOME/appsutil/admin/adgrants.sql <APPS schema name> You need to run the script as follows (replace <APPS schema name> with apps):
SQL> @$ORACLE_HOME/appsutil/admin/adgrants.sql appsThanks,
Hussein

Error 1 when try to install adobe creative cloud

error 1 when try to install adobe creative cloud

Hi Alejandro,
You can follow the article: Error "Failed to Install" Creative Cloud Desktop application which will help you to fix your issue.
Let me know if it works or not.
Thanks,
Ratandeep Arora

Error message comes up when try to install Lync 2010 in a windows XP machine

Hi everyone, this issue is from one of our customer, Ravi Hegde. The error message is " the procedure entry point EventWrite could not be located in the dynamic link lirary ADVAPI32.dll" when try to install the Lync 2010 client in a windows XP
manchine.
does anyone here meet the same issue before and share the solution? many thanks.

Hi Alex,
Please open an elevated command prompt and run the below command;
sfc /scannow
In the event that this doesn't work you might try some of the the below from reading;
1.) jumping back to a realistic restore point that doesn't create a load of work for you in regards to program installation
2.) performing a repair on the OS
3.) Installing all outstanding windows and office updates as these often replace the existing DLL
4.) Repair of Microsoft Office
5.) clean OS install or image deployment
Kind regards
Ben

MBP "System Profile" error when try read "Logs" and long time blue screen

MBP "System Profile" error when try to read "Logs" and it takes long time blue screen at startup.
This happened all time when I open the "System Profiler" application and then select the option "Log", then the system crashed again over and over. The system was reinstalled clean but the error occurs again, without any third party application installed.
Here is the error:
Sun Jun 22 20:13:47 2008
panic(cpu 0 caller 0x001A8CD4): Kernel trap at 0x007efc12, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x013ab000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x045ce1e0, ECX: 0x05782c64, EDX: 0x00010001
CR2: 0x00000000, EBP: 0x344d3ca8, ESI: 0x046ad5c0, EDI: 0x046a8040
EFL: 0x00010206, EIP: 0x007efc12, CS: 0x00000008, DS: 0x00010010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x344d3ab8 : 0x12b0fa (0x459294 0x344d3aec 0x133243 0x0)
0x344d3b08 : 0x1a8cd4 (0x4627fc 0x7efc12 0xe 0x461fac)
0x344d3be8 : 0x19ede5 (0x344d3c00 0x206 0x344d3ca8 0x7efc12)
0x344d3bf8 : 0x7efc12 (0xe 0x48 0x10 0x3e0010)
0x344d3ca8 : 0x3ef261 (0x45ce1e0 0x46a2c40 0x49a7a4 0x0)
0x344d3ce8 : 0x40abe6 (0x46a8040 0x46a2c40 0x344d3d28 0x3eeac0)
0x344d3d08 : 0x40e4fb (0x46aec00 0x46a2c40 0x46aec04 0x46aec00)
0x344d3d28 : 0x43ab14 (0x46aec00 0x46a2c40 0x600000 0x19c8d1)
0x344d3d78 : 0x18801e (0x46aec00 0x4a5e5ac 0x4a5e5c0 0x11d975)
0x344d3db8 : 0x12d17e (0x450adac 0x4a5e590 0x0 0x0)
0x344d3df8 : 0x126257 (0x450ad00 0x0 0x18 0x344d3ee4)
0x344d3f08 : 0x1973dd (0x344d3f44 0x0 0x0 0x0)
0x344d3fc8 : 0x19f3b3 (0x479fee0 0x0 0x10 0x0)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffff1c8
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOFireWireIP(1.7.1)@0x7ea000->0x7f2fff
dependency: com.apple.iokit.IOFireWireFamily(3.4.4)@0x6ed000
dependency: com.apple.iokit.IONetworkingFamily(1.6.0)@0x5d1000
BSD process name corresponding to current thread: ioreg
Mac OS version:
9D34
Kernel version:
Darwin Kernel Version 9.3.0: Fri May 23 00:49:16 PDT 2008; root:xnu-1228.5.18~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
This is the System Config:
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB
Graphics: GeForce 8600M GT, GeForce 8600M GT, spdisplayspciedevice, 256 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), 1.3.5
Bluetooth: Version 2.1.0f17, 2 service, 1 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: FUJITSU MHW2160BHPL, 149.05 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, Apple Inc., high_speed, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., full_speed, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, full_speed, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., low_speed, 500 mA

Hello @larrycarol99,
I understand that after upgrading your computer when you plug in an ethernet cord you get a hardware malfunction error. I am providing you with a Microsoft Support document: Hardware Malfunction Results in System Error Message that explains what causes that error and provides steps on fixing it. I am also including a link to the Compaq Presario 5300US Desktop PC Drivers page, which unfortunately does not have any drivers for your computer running Windows Vista.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Error when trying to install iTunes on Windows laptop.

Everytime I try and install iTunes it come up with an error 'The feature you are trying to use is on a network resource that is unavaliable' It allows me to enter an alternative path but I am not sure what I should be using?

Many thanks.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Error when try to install CPU - Critical Patch Update with OPatch

Similar Messages

Maybe you are looking for