Error when try to install windows 8.1 from UEFI USB

Hello !
I have prepared a UEFI USB flash drive installation for Windows 8.1, as described in this link :
http://www.nextofwindows.com/how-to-make-uefi-bootable-usb-flash-drive-to-install-windows-8/
The computer is on UEFI mode.
Now the computer boot from the USB flash drive, but after some seconds, I get an error message on a blue screen:
Your pc need to be repaired
The application or operating system couldn't be loaded because a required file is missing or contain errors
File \windows\system32\boot\winload.efi
Error code :0xc0000359"
It’s strange because the hard drive has no partitions, and the USB flash drive doesn’t have a path path like
\windows\system32\boot\winload.efi.
What is happening and what should I do?
Thank you !

Hi,
When install Windows on UEFI mode, you need to convert your disk to GPT firstly. Therefore, please check if your disk was already converted to GPT partition style.
On the other hand, you can access to the link below which talking about how to install Windows using UEFI partition style.
https://technet.microsoft.com/en-us/library/dn336946.aspx?f=255&MSPPError=-2147217396
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Error when try to install exchange Server 2013 in windows server 2008 R2 Sp1

Hi
I'm getting these errors while trying to install Microsoft Exchange Server 2013 on my Windows Server 2008 R2 SP1 the user i'm using is the Administrator and it is already a member of "Enterprise
Admins" and "Schema Admins"
in my organization there is 6 Exchange server 2013 in 3 site windows server 2012 in this case
I have to install exchange 2013 in windows Server 2008 r2 sp1
the functional level 2008 R2 I getting these errors please help.
Errors:
This computer doesn't belong to a valid Active Directory site. Check the site and subnet definitions.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.InvalidADSite.aspx
Error:
A reboot from a previous installation is pending. Please restart the system and then rerun Setup.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.RebootPending.aspx
Error:
There is a pending reboot from a previous installation of a Windows Server role or feature. Please restart the computer and then run Setup again.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.PendingRebootWindowsComponents.aspx
Error:
You must be a member of the 'Organization Management' role group or a member of the 'Enterprise Admins' group to continue.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.GlobalServerInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedBridgeheadFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedCafeFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedFrontendTransportFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedMailboxFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedClientAccessFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedUnifiedMessagingFirstInstall.aspx
Error:
Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See the Exchange setup log for more
information on this error.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx
Error:
Either Active Directory doesn't exist, or it can't be contacted.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.CannotAccessAD.aspx

I think it's from subnet in site and services
have 3 site A,B,C and new site is "D"I have problem in "D" site
A subnet is 10.33.50.0/24 AD 2012 ,exchange 2013
B subnet is 10.35.50.0/24 AD 2012 ,exchange 2013
C subnet is 10.36.50.0/24 AD 2012 ,exchange 2013
D subnet is 10.100.100.0/25 AD 2008 ,exchange 2013 error when install it
find event error
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair
the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
test-SetupPrerequisites
{Roles={LanguagePacks, Bridgehead, ClientAccess, UnifiedMessaging, Mailbox, FrontendTransport, Cafe}, LanguagesAvailableToInstall=True, DomainController=, CustomerFeedbackEnabled=True, ExchangeVersion=15.0.847.32, LanguagePackDir=D:\Exchange
Server Software, SufficientLanguagePackDiskSpace=True, ADInitError=Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites
or by rep, ScanType=PrecheckInstall, LanguagePackVersioning=True, HostingDeploymentEnabled=False, TargetDir=C:\Program Files\Microsoft\Exchange Server\V15, SetupRoles={LanguagePacks, AdminTools, Bridgehead, ClientAccess, UnifiedMessaging, Mailbox, FrontendTransport,
Cafe}}

Network Connection error when Trying to Install Windows Server 2012 R2 Essentials

Thank you to anyone who can help me out here. I have a brand new machine with known working wifi and wired ethernet adapters (works under Windows 8.1) I am attempting to install Windows Server 2012 Essentials R2. During the install process, the system connects
to the internet to download updates to help along the install. No problem here. Further down the road after restarting several times and now during the "Configuring Windows Server Essentials" step of the install, I am told "There is no network
connection. Please fix the connection issue and try again."
When troubleshooting the connection, I am told that the wifi adapter drivers may not be installed. I have a wireless card in the machine and have also tried disabling the wifi adapter and have been connected successfully via the ethernet port this whole
time.
Help, I'm stuck and have been to this point in the install 4-5 times already.
Thank you.

Is this a laptop? Can you remove the wifi? Disable it in BIOS?
Does the wifi have an IP and internet when it throws the error?
BTW, when the wizard ask about updates say no. Takes way too long and does not help anything
Change the binding order and put the wired on top.
The Steps?
Just open your Network and Sharing Center. (Change adapter settings)
Press an ALTkey on your keyboard to show the menu bar.
Click on the Advancedmenu
choose Advanced Settings option
Adjust your binding order for your NICs to ensure your wired ones are at the TOP
http://regularitguy.com/2012/12/06/how-to-change-nic-binding-order-in-windows-8-and-windows-server-2012/
Grey

Receiving non system disk error when trying to install Windows 8.1 full version on Mac Mini

I am trying to install Windows 8.1 full version on a Late 2012 Mac Mini using OS X 10.9.2 using boot camp.
The windows partion has been created but when the mac mini reboots I receive a Non System Disk error. Press any key to continue
Please could someone assist with my problem

Thanks for that information, I removed all the external devices except the Superdrive.
Ran Boot camp again, created the MS Dos partition, and the mac restarted.
Now I have received the "No bootable device -- insert boot disk and press any key"
Please help

Error when attempting to install Windows SDK 7.1

I have not been able to install Windows SDK 7.1 (the machine runs Win 7 Pro x64).
The error message shows up in a message box as:
"SDKSetup encountered an error: Input string was not in a correct format."
By browsing to my %TEMP% directory, I find log files as mentioned at http://stackoverflow.com/questions/1901279/windows-7-sdk-installation-failure
Sample content:
16:52:06 Friday, 06 February 2015: -------------------------------------------------------------------------------------------------
16:52:06 Friday, 06 February 2015: [SDKSetup:Info] Begin
16:52:06 Friday, 06 February 2015: [SDKSetup:Info] SDKSetup Version 7.1.7600.30111
16:52:09 Friday, 06 February 2015: [SDKSetup:Info] Beginning download of file http://download.microsoft.com/download/A/6/A/A6AC035D-DA3F-4F0C-ADA4-37C8E5D34E3D/setup\SDKSetup.cab to C:\Users\[username]\AppData\Local\Temp\SDKSetup\SDKSetup.cab
16:52:09 Friday, 06 February 2015: [SDKSetup:Info] Successfully downloaded the file http://download.microsoft.com/download/A/6/A/A6AC035D-DA3F-4F0C-ADA4-37C8E5D34E3D/setup\SDKSetup.cab to C:\Users\[username]\AppData\Local\Temp\SDKSetup\SDKSetup.cab
16:52:09 Friday, 06 February 2015: [SDKSetup:Error]: Input string was not in a correct format. Stack: at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal) at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info) at System.String.System.IConvertible.ToInt32(IFormatProvider provider) at System.Convert.ChangeType(Object value, Type conversionType, IFormatProvider provider) at System.Data.XSDSchema.HandleElementColumn(XmlSchemaElement elem, DataTable table, Boolean isBase) at System.Data.XSDSchema.HandleParticle(XmlSchemaParticle pt, DataTable table, ArrayList tableChildren, Boolean isBase) at System.Data.XSDSchema.HandleComplexType(XmlSchemaComplexType ct, DataTable table, ArrayList tableChildren, Boolean isNillable) at System.Data.XSDSchema.InstantiateTable(XmlSchemaElement node, XmlSchemaComplexType typeNode, Boolean isRef) at System.Data.XSDSchema.HandleTable(XmlSchemaElement node) at System.Data.XSDSchema.HandleParticle(XmlSchemaParticle pt, DataTable table, ArrayList tableChildren, Boolean isBase) at System.Data.XSDSchema.HandleComplexType(XmlSchemaComplexType ct, DataTable table, ArrayList tableChildren, Boolean isNillable) at System.Data.XSDSchema.InstantiateTable(XmlSchemaElement node, XmlSchemaComplexType typeNode, Boolean isRef) at System.Data.XSDSchema.LoadSchema(XmlSchemaSet schemaSet, DataSet ds) at System.Data.DataSet.ReadXmlSchema(XmlReader reader, Boolean denyResolving) at SDKSetup.SDKSetupDll.LoadConfiguration() at SDKSetup.SDKSetupDll.Init(List`1 sourceFileLocations, Boolean quiet, Boolean showHiddenFeatures, InstallModeType installMode, List`1 featureParams, List`1 productParams) at SDKSetup.SDKSetupDll.RunSetup(List`1 sourceFileLocations, String logFileName, String loggingSwitches, Boolean quiet, Boolean showHiddenFeatures, InstallModeType installMode, List`1 featureParams, List`1 productParams, List`1 DisabledFeatures, Boolean sqmOptInFromCmd, String installLocation, String installLocationSamples, Boolean ignoreDependentProducts)
16:52:12 Friday, 06 February 2015: [SDKSetup:Info] End
16:52:12 Friday, 06 February 2015: -------------------------------------------------------------------------------------------------
I tried both the web installer and the ISO image file (the x64 version), with the same result, except that the ISO file omits the downloading step in the log file.
Note:
I have one version of the Microsoft Visual C++ 2005 Redistributable (x64) installed, and one version of the Microsoft Visual C++ 2008 Redistributable (x64) installed. No 2010 (or later) version — see http://blogs.msdn.com/b/vsnetsetup/archive/2012/03/14/unable-to-install-microsoft-windows-sdk-for-windows-7-and-net-framework-4.aspx.
I then noticed it is required to have Microsoft .NET Framework installed, so I installed version 4.5.2.
This did not affect the results. I got the same error message, and the same logged events.
Clean boot did not resolve this. Repairing the .NET Framework installation did not resolve this.
Thanks for any guidance,
DIV

You need to know what you have already.
Open Disk Utility, go to the First Aid tab, take a screenshot of the lefthand sidebar.
I won't advise on partitioning until I know what is there. (The BCA page where you create the partition will not show whether there is another, it will just fail if there is)

Error when trying to install any air application from my flex builder project

I have a serious problem, I am unable to install any exported air file created in my AppTest project. I just keep getting an error saying: "Sorry, an error has occurred. The application could not be installed because the AIR file is damaged. Try obtaining a new AIR file from the application author."
I am using FlexBuilder 3 to build and export my app release build. If anyone can help me I would greatly appreciate it.
Adam

I'd try un-then-reinstalling and making sure any overlay that you're applying (update of SDKs, etc.) are done correctly.

Get 8004 error when using copy past command transferring pictures from one USB drive to another, why ?

Why do I get 8004 error, when I use copy past command to transfer pictures from one USB drive to another ?
There is no problem if the second drive is empty.

mumbles27 wrote:
one is MS-DOS
would that be in FAT32 or NTFS ?
mac OS extended (case sensitive)
i'm not 100 % sure but i have a fancy such a combination may not play well together.
nothing bigger than 2GB for one file
i was asking because FAT3 has a limitation in that it will not allow you to copy files larger than 4 GB.
JGG

Error when try to install CPU - Critical Patch Update with OPatch

Hello gurus,
I´m faccing with a problem... After I update the patch set to 10.2.0.4 and install the interim patches for Linux X86_64 now I´m trying to import/install the Oracle Critical Patch Update - Oracle CPU patch!!
I´m trying to import it with OPatch, and I already update this OPatch tool for the last version even before proceeding with installation of Oracle CPU!
I've tried to import it by two methods. The first I tried to apply as described in the relevant README file inside of CPU patch directory, and I used in this case the following command:
redhatsap:orajmd> unzip p9119226_10204_<platform>.zip
redhatsap:orajmd> cd 9119226
redhatsap:orajmd> opatch napply -skip_subset -skip_duplicate
opatch: Command not found
After that previous error, I tried again but now with other method that is described in note 839182 (Installing patches using OPatch) with the following command:
redhatsap:orajmd> cd 9119226
redhatsap:orajmd> $ORACLE_HOME/OPatch/opatch apply
========================================================
GENERIC OPATCH VERSION - FOR USE IN SAP ENVIRONMENT ONLY
========================================================
Invoking OPatch 10.2.0.4.5
Oracle Interim Patch Installer version 10.2.0.4.5
Copyright (c) 2008, Oracle Corporation. All rights reserved.
Oracle Home       : /oracle/JMD/102_64
Central Inventory : /oracle/oraInventory
   from           : /etc/oraInst.loc
OPatch version    : 10.2.0.4.5
OUI version       : 10.2.0.4.0
OUI location      : /oracle/JMD/102_64/oui
Log file location : /oracle/JMD/102_64/cfgtoollogs/opatch/opatch2010-04-19_01-49-17AM.log
Patch history file: /oracle/JMD/102_64/cfgtoollogs/opatch/opatch_history.txt
Failed to load the patch object. Possible causes are:
The specified path is not an interim Patch shiphome
Meta-data files are missing from the patch area
Patch location = /oracle/JMD/102_64/9119226
Details = PatchObject constructor: Input file "/oracle/JMD/102_64/9119226/etc/config/actions" or "/oracle/JMD/102_64/9119226/etc/config/inventory" does not exist.
ApplySession failed: PatchObject constructor: Input file "/oracle/JMD/102_64/9119226/etc/config/actions" or "/oracle/JMD/102_64/9119226/etc/config/inventory" does not exist.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 73
Can you help me please?
Best regards
João Dimas - Portugal

Hello again Joe Bo... and all of others,
I´m with a doubt after installing the CPU patch, which is related to post-installation tasks. I´m in this momment install the SAP System and it was during this installation that sapinst asked me to install the database and all other activities after this installation that are related to the database, for example, the updating of database patches.
At README file in chapter 3.3.2 Post Installation Instructions is described the following:
After installing the patch, perform the following actions:
1.Load modified .sql files into the database, as explained in Section 3.3.2.1.
2.Recompile views in the database, if necessary, as explained in Section 3.3.2.2.
In this momment, as you certainly know, I still don´t have a database because the sap system isn´t yet totally installed (I´m in phase 8 of sapinst wizard).
I only have to do this "Post Installation Tasks" when I have a database, this database will be created after that phase 8 - so now I don´t need to perform the post steps... am I right?
Thanks in advance,
João Dimas - Portugal

'failed to load LENOVO_GetSystemType ' error when try to install or uninstall Presentation Director

It seems like some dll faulty or some program's "Get#####" Funcation failed.
Anyone have ideas how to fix it?

Looking at the AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_myprograminfo led us to the last dll loaded being:
LoadedModule[211]=C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crdb_adoplus_res_en.dll
State[0].Key=Transport.DoneStage1
State[0].Value=1
FriendlyEventName=Stopped working
Scanning the community for "crdb_adoplus_res_en.dll" we got a hot on this issue again:
Failed to load database information. Error in File temp_
From the above we found this:
1. the app.exe.config is all in one package which cannot be separated with the EXE file.
2. the supporting component such as dll files, app.exe.config etc CANNOT be combined into the EXE file
Adding the cr3Test.exe.config to the same folder as the cr3Test.exe RESOLVED the problem on Win 7. It also RESOLVED the problem on Server 2012 R2.
We still need to test on Server 2008 R2 but we are hopeful when that time comes.
Thanks.
Bruce

RH7 - connection error when try to access RoboHelp Server 8 from Pod menu

I'm using RoboHelp 7 with WebHelp Pro layout to publish my project(s) to RoboHelp Server 8. I've got RHServer 8 set up and can view the Admin window when I access the server.
However, locally when I open my project in RH7, I get a "Connection to Server Failed" message below when I select View > Pods > RoboHelp Server and then click "Connect Now" on the RoboHelp Server tab.
Connection to Server Failed - The server you entered in the Properties dialog for the primary layout cannot be contacted. Please verify the spelling or contact your system administrator to verify the server is running.
This makes no sense because I'm able to view the project published to the server via File > View Primary Layout from Server.
I'm also able to publish my updated project files to the server without a problem.
FYI - I'm still testing RoboHelp 8 and when I select the RoboHelp Server option indicated above, I am able to view the Admin window prompts in RH8 on the RoboHelp Server tab.
So why can I see the Admin function in RH8 but not in RH7?

Hi,
Glad that somebody else too got this problem. Well, as I had mentioned in my previous posting too, I think there are some procedures in the package, dbms_lob, like the writeappend, createtemporary etc.. which is not found in my dbms_lob.sql file, I am using 8.0.5, but I found these procedures in the 8i, I think it is becos of that.
By the way if anybody got this solution and got any workaround, please help me too.
I am still waiting for the solution to that.
Shanthi

Getting error code 0xC0000005 while installing windows 8.1 x64

Please help me..
I am getting error code 0xC0000005 while installing fresh copy of windows 8.1 x64
When the installation process arrives at 87% every time I get the error code saying that installation can not be done.
I can not install windows 8.1 x64 version on my laptop.
please tell me how to solve the problem and install windows 8.1 x64 version on my laptop.
I tried with dvd-rom and usb as well, but the result is same..just stuck at 87%...can not be installed....
how to overcome it...please...
This question was solved.
View Solution.

Hi there @Achintya-only
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I see that you are getting an error code, when you try to install Windows 8.1 from USB or DVD. I am happy to assist.
Just to clarify, you are using a standalone Windows installation disk, you are not using a factory recovery image. Is that correct?
Have you run the hardware diagnostics on your notebook? HP Notebook PCs - Testing for Hardware Failures (Windows 8)
What operating system was on the system before, and have you made a set of recovery media, for your original factory installation?
Please let me know what you find.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Error message comes up when try to install Lync 2010 in a windows XP machine

Hi everyone, this issue is from one of our customer, Ravi Hegde. The error message is " the procedure entry point EventWrite could not be located in the dynamic link lirary ADVAPI32.dll" when try to install the Lync 2010 client in a windows XP
manchine.
does anyone here meet the same issue before and share the solution? many thanks.

Hi Alex,
Please open an elevated command prompt and run the below command;
sfc /scannow
In the event that this doesn't work you might try some of the the below from reading;
1.) jumping back to a realistic restore point that doesn't create a load of work for you in regards to program installation
2.) performing a repair on the OS
3.) Installing all outstanding windows and office updates as these often replace the existing DLL
4.) Repair of Microsoft Office
5.) clean OS install or image deployment
Kind regards
Ben

Error Code 0x80070035 shows when I try to Access Windows XP machine from Windows8/Windows7

Error Code 0x80070035 shows when I try to Access Windows XP machine from Windows8/Windows7. in my PC i m installed windows8 and used primary and secondary IP. Primary is used for Access my Domain/Internet and secondary IP is used for access my VPN and
there is no internet on VPN. VPN is only used for my Head Office Appication. After i give secondary IP to my windos8/windos7 PC the Active network status changed to private network and not able to acces windows XP machines. Please Advice...

Hi,
This error means that the Network path was not found. Was Windows XP locating in the same network as the secondary IP on Windows 8/7?
Please try the solution below. Use the IP address of the target computer, not the computer name.
1) Find out what the target computer's IP address is. It is desirable to give the target computer a static private IP address, for example, 192.168.1.10, so it does not change. Use the local windows help when sitting in front of the target computer
to do this if you don't know how.
2) When sitting in front of the Windows 7 computer you want to access the target computer from, open Windows Explorer and in the address bar type \\ followed by the target computer's static address, for example,\\192.168.1.10 and hit enter.
If the target computer uses username/password sharing, after a few seconds you will be prompted for credentials. Enter the same username and password employed to log on to the target computer when you are sitting in front of it.
The target computer will be added to the Windows 7 computer's Network list, appearing as an IP address instead of a computer name. Then you can access its shares just as if it were listed by name instead of by number.
Kate Li
TechNet Community Support

Every time I try to install windows service pack 2 I get error message WindowsUpdate_80004005

When I try to install windows service pack 2 I get error message WindowsUpdate_80004005, has anyone else had this problem and how do you fix it

If you have an external drive (USB thumbdrive or hard disk) connected, disconnect it and try the service pack installation again.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Action list not found error when trying to install Flash 11. I have IE8 and windows 32 bit. What can

action list not found error when trying to install Flash 11. I have IE8 and windows 32 bit. What can I do? Thanks

Hi, Please try to download the installer from the links provided in the following page: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
Thanks,
Sunil

Error when try to install windows 8.1 from UEFI USB

Similar Messages

Maybe you are looking for