Error when trying to activate the NI Fbus Ver 4

I have tryed the online activation, fill out all the info then when i hit continue i get an error, i then tried the phone activation line gave all my info and it said technical error, i then stayed on the line and talked to someone who also tryed it online and same result, i was told to try the forums for help. I am trying to activate NI-FBUS Ver 4

Hi,
The activation request you encountered is for NI-FBUS Configurator. NI-FBUS Configurator is a graphical tool for complete FF network configuration. Its license needs extra purchasing.
Another NI-FBUS software you installed is Communications Manager. Communications Manager provides the drivers for NI-FBUS interface devices and APIs for accessing FF network. You can build your own FF applications using the APIs. Communications Manager is free of charge and does not need activation.
If you are using Communications Manager only, there is no need to do any activation.
Could you send your serial number to [email protected]? I will check the activation status for you. Thanks.
Feilian (Vince) Shen

Similar Messages

Class activation failed Error when trying to activate the enhancement

Hi ,
Wheni try to activate the enhancement for the component BP_HEAD_SEARCH view SEARCHHELP
i get the following error message Class activation failed Message no. BL001
the error occurs in implementation class , as wizard is adding some junk code.
Is there other way to work on it .
Edited by: sowmya K on Dec 9, 2008 2:00 PM
Edited by: Lakshmi on Dec 10, 2008 9:14 AM

The method WD_CREATE_CONTEXT in your Z-class has two ENDMETHOD. lines, one before and one after the wizard-implementation "ztyped_context ?= context." Just delete the first ENDMETHOD. line and activate the class, should work fine.
Alternatively implement the note 1167357
Edited by: Philip Kopetzky on Jan 14, 2009 12:34 PM

E-Reader throws an error when trying to activate the ebook (DRM)

On my e-Reader (Poketbook touch lux) is adobe digital editions allready installed, so I should be able to activate my books on the reader. When I open the acsm file it tells me that I have to activate my book. So I enter my Adobe ID and Password. Then he works a few moments and shows me this error:
E_STREAM_ERROR CURL returned 6 (6)
Does anyone know what I can do to be able avtivate my books on the e-reader?
Regards

I can't see much about this error on the web:
one comment is at http://www.topreviewshop.com/nextbook_next2_tablet_e_reader_conclusion
Just a thought, ADE and some ereader devices/apps do not like passwords that include special characters.
If you have anything other than non-accented letters and numbers in your password,
log in at the Adobe website and change the password to a weaker one.
Then try again to activate.

HT204406 hi!!!! I keep getting an "error" when trying to activate my iTunes match. I get to the 1st step, then it gets stopped, and I get the error message. HELP!!!!!!

hi!!!! I keep getting an "error" when trying to activate my iTunes match. I get to the 1st step, then it gets stopped, and I get the error message. HELP!!!!!!

That's definitely enough to start.
It sure seems like it should work...and then I saw that you're using a router. It could very well be that the router is the weak link here.
Instead connecting to your network router, try using a direct USB connection from your MBP. If that doesn't work, you read this post, which may be relevant to your problem:
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/Scanning-from-Mac-10-7-fa ils-after-all-recommendations-Not-ready/td-p/1287003
It seems you're up to date with software. Post with your results.

Error when trying to activate new valuation area - AU158

Hi,
I´m getting an error when trying to activate a new valuation area by using AFBN transaction. I get a message that says "Closed fiscal years for areas 01 and 08 differ by more than 1 year" (AU158).
Then the system recomends me to check the settings of the depreciation areas for the closed fiscal years since the closed fiscal years of the areas are not allowed to more than 1 years apart.
When I check the settings in transaction OAAR what I see is: area 01 - 2010 and area 08 (newest) - 2008 fiscal year is assigned.
How can I close area 08? Will I need reopen the 01 area until 2008 fiscal year?
How can I create the new area with the same fiscal year closing?
Tks

Year end closing--AJAB
FY Change---AJRW
If you open FY 2008, then you can create new depreciation area through AFBN.
I guess this depreciation area doesn't generate any postings and this is only for reporting purpose.

Error when trying to activate new valuation area.

Hello forum,
I´m getting an error when trying to activate a new valuation area by using AFBN transaction. I get a message that says "Closed fiscal years for areas 01 and 10 differ by more than 1 year".
Then the system recomends me to check the settings of the depreciation areas for the closed fiscal years since the closed fiscal years of the areas are not allowed to more than 1 years apart.
But when I check the settings in transaction OAAR what I see is that same fiscal year is assigned to all the areas.
I don´t understand why the system is showing me this error then...How can I ensure all areas to be in the same fiscal year.
Thanks in advance

Hi,
Do you have other company codes which are using the same Chart of Depreciation? Please check these company codes and perform fiscal year change to them.
It seems that the problem is related to note 421549 : the system tries
to check the entries for field T093B-ABGJA for all the entries,not
only for the relevant company code. If there's a difference of more
than 1 fiscal year between the last closed fiscal year for the area
you are trying to create, and one of the entries in T093B, then,
error AU 158 arises."
Because according to the note 421549: the system tried to check the entries for field for ALL THE ENTRIES,not only for the relevant company code.
If there's a difference of more than 1 fiscal year between the last closed fiscal year for the area you are trying to create, and one of the entries in T093B, then, error AU 158 arises.
Regards Bernhard
Edited by: Bernhard Kirchner on Jul 19, 2010 1:22 PM

Error when trying to access the RBAC User editor and Message tracking

Hi,
I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue.
https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
I then checked the event logs on the server and saw the below error logged;
Current user: 'Domain/Server Services Accounts/administrator'
Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
--- End of inner exception stack trace ---
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.default_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
Any ideas as to what the above event log is specifically referring to?

Hi,
From your description, I would like to clarify the following thing:
If you want to search message tracking logs, the account you use should be a member of the role groups below:
Organization Management role group, Records Management role group, Recipient Management role group.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

I'm getting a -2003F error when trying to run the internet recovery after installing a new hard disk in my macbook pro, any suggestions?

After installing a new hard drive in my 2011 macbook pro, I'm getting a apple.com/support -2003F error when trying to run the internet recovery. Any suggestions?

Did you format the new HDD? What is the status of the old HDD?
Do you have an early or late 2011 MBP?
Ciao.

I keep getting an error when trying to receive the new update iOS7 on iPhone5. Any suggestions?

I keep getting an error when trying to receive the new update iOS7 on iPhone5. Any suggestions?

Do the update using iTunes on your computer.
Plug your iPhone into iTunes (current version), let it sync, then click "Check for Updates" on the iPhone's summary page in iTunes.

VO Ext- Error ocurred trying to activate the wizard pageAttribute settings

Hi
I am new to OAF and working on R12.1.3 vesrion. I am facing an issue while extending standard VO CustomerAccessesVO which is in the path
/oracle/apps/asn/common/customer/server. My requirement is to add a new column AS_ACCESSES_ALL.SALESFORECE_ROLE_CODE in the extended view.
This VO uses the entity object CustomerAccessEO(/oracle/apps/asn/common/customer/schema/server) and this entity object extends another EO AccessEO which is having base table AS_ACCESSES_ALL (/oracle/apps/asn/common/schema/server).
While extending this VO, I only select EO CustomerAccessEO and then I will have the attribute in available attribute list and selected attribute list.
Available attribute list is having all the attributes which are in EO AccessEO(As CustomerAccessEO is not having any attribute it only extend AccessEO).
Selected attribute list is having all the attibutes which are present in the query of CustomerAccessesVO.
Now if I include a new attribute as my new column and even I don't include any new attribute and click on Next button. I got error 'Error ocurred trying to activate the wizard pageAttribute settings' java.lang.NullPointerException.
Now If I included my new column by adding new attribute and ignore this error I am able to extend this VO and able to get all the file Server.xml, XXCustomerAccessesVO.xml, Voimpl.java, Rowimpl.java.
But the problem is rowimpl.java file is generated empty.*
However I substitute this extended VO I am able to see the extended VO in application but that says- No entity object used. No attributes are selected.
In short my problem is:-
*1) Getting error 'Error ocurred trying to activate the wizard pageAttribute settings' in Create View Object wizard.
2) If I ignore error why *rowimpl.java file is generated empty even I checked all the check boxes.
3) Why I am getting message in application-- No entity object used. No attributes are selected.*
Please reply as this is have become critical.
Thanks
Piyush

Hi All,
Problem is still not yet resolved.
Can any one please look into it.

I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before

I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before

Solution:
Open Disk Utility.
Select your external hard disk and run a “verify” on it. After a few minutes (depending on the size of your drive), you should be good to go. You don’t need to run a “repair” on it... (at least I didn’t have to). See photo for reference.
This should fix the permissions issue, because on my Mac running Mountain Lion I was unable to edit the permissions in the get info dialog window even after "unlocking" the drive.

I get an error when trying to open "The application Creative Cloud can't be opened. -1712

I get an error when trying to open "The application Creative Cloud can't be opened. -1712

The application Install.app can't be opened. -1712

Error when trying to refresh the current report-Invalid prompt def.WIS00005

I am trying to create a Webi report using a Universe created with Universe Design Tool 4.0. I have created a new universe with a secured relational connection from a cube in our BBD system. The Universe can be created and exported in UDT (and when I test the connection, I get a message saying the server is responding). I can see values for the BEx query in BEx analyzer.
When I open Webi and connect to a universe, I can see the universe, but when I put a dimension to our results tab and go to "run query", I first get the error "Error when trying to refresh the current report". If I close this error I get the error "Invalid Prompt Definiton - WIS00005". Has anybody else had this issue and if so, where can I begin to troubleshoot the error?

Hi,
Please note that if the object parses at Universe level it may still fail at runtime especially for the prompts.
If you still experience the error after applying Patch 11 please analyze the characteristics of the prompt, get some trace logs with High level of detail, they surely will help.
Thanks!
Best regards,
Simone

Error when trying to start the ToolsAndFrameworks to access Endeca workbenc

Hi All,
I am getting the below error when trying to start the ToolsAndFrameworks.
Starting Workbench (background process)
The BASEDIR environment variable is not defined correctly
This environment variable is needed to run this program
Regards
SK

Hi SK,
This occurs in those cases where the Endeca environment variables are not set properly. Make sure all the Endeca environment variables are set before starting the Tools services.
Executing the 'mdex_setup_ini' and 'installar_sh.ini' will setup the Endeca environment variables. Below are the commands for the same.
source /local/endeca/MDEX/6.3.0/mdex_setup_sh.ini
source /local/endeca/PlatformServices/workspace/setup/installer_sh.ini
HTH,
Mahesh

Error when trying to refresh the current report

I am having this error message "Error when trying to refresh the current report on my reports appear before they are executed. It has been a very random so I am unable to pinpoint what is causing it. I am currently working with BO 4.1 and it is connected to BW, whereby the authentication is SSO.
Either way the reports are able to run with problems but I dislike having to insist with the refresh button or having to close and reopen the report for it to run as it should.
I did some investigations but did not find anything conclusive because there is no problems with authorizations, there are no merged dimensions nor grouping variables used in the report and it is based on just one query.
Does anyone know why this error message appears? What its cause is?

Hi
While creating the report if we select the authentication mode as :Use specified user name and password or Use Business Objects credential mapping, will get the same error.
So if possible can you please test change Connection Type Authentication Mode to Single Sign on.
Find the below link.
http://scn.sap.com/community/semantic-layer/blog/2014/06/06/how-to-change-connection-type-authentication-mode-to-sso-1

Error when trying to activate the NI Fbus Ver 4

Similar Messages

Maybe you are looking for