Error when trying to attach the Appraisal Submenu and function

when i click on the link/function of Appraisal i am getting the following error in my Employee's SSHR responsibility:
ERROR
Can not access function PER_APPRAISAL_EMPLOYEE. This installation does not manage mode pl/sql. Please contact your System Administrator.
plz help!

Hi,
From your description, I would like to clarify the following thing:
If you want to search message tracking logs, the account you use should be a member of the role groups below:
Organization Management role group, Records Management role group, Recipient Management role group.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Similar Messages

942: error when trying to browse/refresh Packages, Procedures and Functions

Hi,
I'm using OSD 1.1 against 10g.
I can create and compile functions in a certain schema but when I try to browse the Functions node I get "ORA-00942: table or view does not exist." and the node does not expand.
The same thing happens with the Packages and Procedures nodes.
Does anyone have any ideas?
Thanks in advance
Mike

I've got the same problem with SQL Developer 1.1.0.23.64 against 9.2.0.4.0 and 10.1.0.4.0. This error occured only for a few package/procedure/function owners. I've found that these owners have SELECT ANY TABLE system privilege. In such case SQL Developer generates following SELECT:
SELECT OBJECT_NAME, OBJECT_ID, DECODE(STATUS, 'INVALID', 'TRUE', 'FALSE') INVALID, 'TRUE' runnable, NVL( b.HAS_BODY, 'FALSE') HAS_BODY
FROM SYS.DBA_OBJECTS a,
(SELECT 'TRUE' HAS_BODY, object_name tmp_name FROM SYS.DBA_OBJECTS WHERE OWNER = :SCHEMA AND OBJECT_TYPE = 'PACKAGE BODY') b
WHERE OWNER = :SCHEMA
AND OBJECT_TYPE = 'PACKAGE'
AND object_name = tmp_name (+)
AND SUBOBJECT_NAME IS NULL
AND OBJECT_ID NOT IN ( SELECT PURGE_OBJECT FROM RECYCLEBIN )
Otherwise it generates
SELECT OBJECT_NAME, OBJECT_ID, DECODE(STATUS, 'INVALID', 'TRUE', 'FALSE') INVALID, 'TRUE' runnable, NVL( b.HAS_BODY, 'FALSE') HAS_BODY
FROM SYS.ALL_OBJECTS a,
(SELECT 'TRUE' HAS_BODY, object_name tmp_name FROM SYS.ALL_OBJECTS WHERE OWNER = :SCHEMA AND OBJECT_TYPE = 'PACKAGE BODY') b
WHERE OWNER = :SCHEMA
AND OBJECT_TYPE = 'PACKAGE'
AND object_name = tmp_name (+)
AND SUBOBJECT_NAME IS NULL
AND OBJECT_ID NOT IN ( SELECT PURGE_OBJECT FROM RECYCLEBIN )
Both for 10g.
So you could try to grant SELECT on DBA_OBJECTS to owner of your functions.
I don't know why SQL Developer doesn't SELECT from ALL_OBJECTS in all cases.
Jiri
Message was edited by:
Jiri Suchy
You will need grant SELECT on DBA_SOURCE, too.

CName Error When Trying to Attach Particular File

I am using custom buttons to attach, view and remove attachment files to my LiveCycle form. Most files attach without any problem. I have a particular file named, "RECN-TrackingLog.xlsm" that I receive the following error when trying to attach this file to the form. If I copy the file to my desktop, it attaches to the form without any problem. It is named exactly the same. Any idea what is causing this error? I have included the script for the "Attach" button below.
var myDoc = event.target;
var sFile = "myFile"+Math.round(Math.random()*10000000000000);//Randomly generated number
myDoc.importDataObject({cName: sFile});
var myDataObject = myDoc.getDataObject(sFile);
var sFileName = myDataObject.path;
ListBox1.addItem(sFileName,sFile);
NumericField1.rawValue = NumericField1.rawValue + 1;

This error turned out to be caused because someone else had that networked file open at the time I was trying to attach the file. That's why when I dragged and dropped a copy onto my desktop, that "version" of the file was not open and would attach without any problem.

Error when trying to access the RBAC User editor and Message tracking

Hi,
I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue.
https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
I then checked the event logs on the server and saw the below error logged;
Current user: 'Domain/Server Services Accounts/administrator'
Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
--- End of inner exception stack trace ---
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.default_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
Any ideas as to what the above event log is specifically referring to?

Hi,
From your description, I would like to clarify the following thing:
If you want to search message tracking logs, the account you use should be a member of the role groups below:
Organization Management role group, Records Management role group, Recipient Management role group.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

I'm getting a -2003F error when trying to run the internet recovery after installing a new hard disk in my macbook pro, any suggestions?

After installing a new hard drive in my 2011 macbook pro, I'm getting a apple.com/support -2003F error when trying to run the internet recovery. Any suggestions?

Did you format the new HDD? What is the status of the old HDD?
Do you have an early or late 2011 MBP?
Ciao.

I keep getting an error when trying to receive the new update iOS7 on iPhone5. Any suggestions?

I keep getting an error when trying to receive the new update iOS7 on iPhone5. Any suggestions?

Do the update using iTunes on your computer.
Plug your iPhone into iTunes (current version), let it sync, then click "Check for Updates" on the iPhone's summary page in iTunes.

I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before

I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before

Solution:
Open Disk Utility.
Select your external hard disk and run a “verify” on it. After a few minutes (depending on the size of your drive), you should be good to go. You don’t need to run a “repair” on it... (at least I didn’t have to). See photo for reference.
This should fix the permissions issue, because on my Mac running Mountain Lion I was unable to edit the permissions in the get info dialog window even after "unlocking" the drive.

I get an error when trying to open "The application Creative Cloud can't be opened. -1712

I get an error when trying to open "The application Creative Cloud can't be opened. -1712

The application Install.app can't be opened. -1712

Error when trying to refresh the current report-Invalid prompt def.WIS00005

I am trying to create a Webi report using a Universe created with Universe Design Tool 4.0. I have created a new universe with a secured relational connection from a cube in our BBD system. The Universe can be created and exported in UDT (and when I test the connection, I get a message saying the server is responding). I can see values for the BEx query in BEx analyzer.
When I open Webi and connect to a universe, I can see the universe, but when I put a dimension to our results tab and go to "run query", I first get the error "Error when trying to refresh the current report". If I close this error I get the error "Invalid Prompt Definiton - WIS00005". Has anybody else had this issue and if so, where can I begin to troubleshoot the error?

Hi,
Please note that if the object parses at Universe level it may still fail at runtime especially for the prompts.
If you still experience the error after applying Patch 11 please analyze the characteristics of the prompt, get some trace logs with High level of detail, they surely will help.
Thanks!
Best regards,
Simone

Error when trying to start the ToolsAndFrameworks to access Endeca workbenc

Hi All,
I am getting the below error when trying to start the ToolsAndFrameworks.
Starting Workbench (background process)
The BASEDIR environment variable is not defined correctly
This environment variable is needed to run this program
Regards
SK

Hi SK,
This occurs in those cases where the Endeca environment variables are not set properly. Make sure all the Endeca environment variables are set before starting the Tools services.
Executing the 'mdex_setup_ini' and 'installar_sh.ini' will setup the Endeca environment variables. Below are the commands for the same.
source /local/endeca/MDEX/6.3.0/mdex_setup_sh.ini
source /local/endeca/PlatformServices/workspace/setup/installer_sh.ini
HTH,
Mahesh

Error when trying to refresh the current report

I am having this error message "Error when trying to refresh the current report on my reports appear before they are executed. It has been a very random so I am unable to pinpoint what is causing it. I am currently working with BO 4.1 and it is connected to BW, whereby the authentication is SSO.
Either way the reports are able to run with problems but I dislike having to insist with the refresh button or having to close and reopen the report for it to run as it should.
I did some investigations but did not find anything conclusive because there is no problems with authorizations, there are no merged dimensions nor grouping variables used in the report and it is based on just one query.
Does anyone know why this error message appears? What its cause is?

Hi
While creating the report if we select the authentication mode as :Use specified user name and password or Use Business Objects credential mapping, will get the same error.
So if possible can you please test change Connection Type Authentication Mode to Single Sign on.
Find the below link.
http://scn.sap.com/community/semantic-layer/blog/2014/06/06/how-to-change-connection-type-authentication-mode-to-sso-1

"please use setup.exe for installation instead of blackberry desktop software.msi" error when trying to install the software through 610_b038_multilanguage.exe

"please use setup.exe for installation instead of blackberry desktop software.msi" error when trying to install the software through 610_b038_multilanguage.exe
I need to install this so that i can transfer my contacts and calendar to my laptop

Hi and Welcome to the Community!
Sorry to be dense, but what happens when you do exactly as the message instructs?
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Always getting a server error when trying to download the products

I' always getting a server error when trying to download the products since yesterday, what can I do ?

Try using a different browser

HT4796 I keep getting a Windows Mail error when trying to run the assistant on my pc, but I don't have any email programs open.

I keep getting a Windows Mail error when trying to run the assistant on my pc, but I don't have any email programs open.

You could of course use Safari your default browser as a quick method of accessing gmail until you figure out the Firefox problem. (More than one browser may be used on a Mac or other computer).
Is this the only site you have problems with ? and does Safari work ok ?
Often this problem requires the page to be reloaded
* try pressing the shift key as you reload the page
Another problem is sometimes the cookies for that site need clearing
* see [[Delete cookies to remove the information websites have stored on your computer#w_delete-cookies-for-a-single-site]]_delete-cookies-for-a-single-site
* see also [[Firefox and other browsers can't load websites]] or[[Firefox can't load websites but other browsers can]]

I get the following error when trying to use the itunes store "your apple id has been disabled"

I get the following error when trying to use the itunes store "your apple id has been disabled". My account was disabled when someone else had been using it without my knowledge. I changed my apple id password and the apple id is still fine, but itunes has it disabled. I verified that the computer is authorized for this apple id. What to do now?

Welcome to the Apple Community.
Contact Apple through iTunes Store Support

Error when trying to attach the Appraisal Submenu and function

Similar Messages

Maybe you are looking for