Error when trying to book an iPhone in for service (addrapi.08)

Hi all,
I've been trying to book an iPhone in for service via the Apple Support site for a few weeks now because my nearest Apple store is about an hour and a half away. Every time I try and do this I get this error after clicking continue after doing the my address section.
"Service is not available in this location. Please choose another solution (addrapi.08)"
I've had to book another iPhone in for service before and never had this error, and I've also tried doing it from another PC with a different IP etc.and I get the same issue.
Any help would be appreciated as I need to get my phone sorted
Thanks

SamWorth23 wrote:
Hi all,
I've been trying to book an iPhone in for service via the Apple Support site for a few weeks now because my nearest Apple store is about an hour and a half away. Every time I try and do this I get this error after clicking continue after doing the my address section.
"Service is not available in this location. Please choose another solution (addrapi.08)"
I've had to book another iPhone in for service before and never had this error, and I've also tried doing it from another PC with a different IP etc.and I get the same issue.
Any help would be appreciated as I need to get my phone sorted
Thanks
I'm going to assume base off that message is that whatever you need done to your iphone - that location doesn't do that kind of service.

Similar Messages

Keep getting sync service error when trying to connect my iphone 5S.

Keep getting sync service error when trying to connect my iphone 5S. It freezes itunes and I can't do anything else. I see that there is an update for my phone and I need to back up, upload new apps, etc before installing. I plug my phone in and get this error every time. I am using a Win 7 SP1

Howdy Susie48825,
It sounds like you are getting an error that mentions the sync services when you connect your phone to your computer and so you cannot sync your device. I would use the troubleshooting from the following article that mentions an error regardign the sync services named:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/ts2690
Start with these steps:
1. Check that iTunes is up-to-date
Ensure that you have updated to the latest version of iTunes.
2. Reset Sync History
Resetting your Sync History is a simple step which may resolve some syncing issues. If this works, iTunes will prompt to Merge or Replace the information on your device when you next attempt to sync. To reset your Sync History:
Disconnect your device.
Open iTunes.
From the Edit menu, choose Preferences.
Click the Devices tab.
Click the Reset Sync History button, and then reconnect your device.
If this resolves the issue, and you know all of your contacts, calendars, bookmarks and notes are on your computer:
Reset the Sync History again using the steps above.
Select the device in iTunes and click the Info tab.
Scroll down to the Advanced section, and under "Replace information on this iPhone/iPad/iPod touch" select Contacts or Calendars.
Click Apply.
If the issue persists, and you know all your contacts, calendars, bookmarks and notes are on your iPhone, iPad, or iPod touch:
Remove all of the contact and calendar information from Outlook.
Select the device in iTunes and click the Info tab.
Scroll down to the Advanced section, and under "Replace information on this iPhone/iPad/iPod touch" make sure Contacts and Calendars are not selected.
Click Apply.
There are additional steps to use in the article if needed, but these will get you started.
Thank you for using Apple Support Communities.
All the very best,
Sterling

HT201210 why do i get an unknown error when trying to restore my Iphone 3GS,

i was informed (by app store icon i had apps that needed to be updated ,
i said ok to the 2 updates ,
the phine then asked me (as usual) to insert my pass word
it said i had used wrong pass word and re-enter it which i did
this then set my phone to keep switching itself on and off repetedly
i tried to switch off the phone using the power button butg at first this did not work,
i then pressed reset (power button and home button, as requested in the user guide
my phone then came back on with the itunes and usb logo tgelling me to connect to itunes to do a restore ,
after the phone tries to update itself with the download
although the phone trys to reboot and use the down load it just keeps disconnecting fron my computer
and itunes come back with an error message telling me it cannot make contact with the phone
there are no other fixes on your site
so now my phone is out of warranty it is now useless
i had though of upgrading to an iphone 4S but am now thinking do i want to do that now this has happened
maybe its time to go back to android also recently bought an IPAD touch which up to now is fine
but not sure if i should keep this as ive never had this happen to me before and the phones are so expensive
my old galaxy android phone still works fine , so ive now put my sim card in there and works fine after 5 years continuous use
what would you suggest i do now
what will you do to make me stay with apple ????
Mr walter Dickson

Have you tried to download anything else?

Error when trying to download on iphone 5

account not in this store on iphone, it say's it's looking in the French store. However, I am in the U.S,A,
I've looked in Itunes under account settings to no avai other than the country setting witch was already set
to US.

ianAPOC wrote:
I am currently running Leopard 10.5.5, and i'm trying to update to 10.5.6 so I can install iLife '09, however i'm getting an error message that simply says I do not have sufficient access privileges.
however, my account is the only one of my laptop, and therefore is the Admin account. Any idea how to fix this problem? I searched in the forums for this particular problem, and found one case, but I had no idea what the guy said on how to fix it.
Your subject says you have an error downloading the update, not installing it. Are you able to download the update or what?

I get an error when trying to backup my Iphone 6 in itunes to my computer?

IOS 8. 02, iPhone 6. My device will not backup in itunes to my computer. I successfully backed up before updating to IOS 8.02. Now I get an error saying iphone was not backed up because itunes could not back up to this computer. I have over 300 GB of free hard drive space so that is not the issue. I have removed older backups. Any suggestions?

Hi blkone35,
If you are having an issue with doing a backup of your iPhone using iTunes, you may want to troubleshoot using the steps in this article -
iOS: If you can't back up or restore from a backup in iTunes
Thanks for using Apple Support Communities.
Best,
Brett L

Error when trying to sync my Iphone 5c

I have always been able to sync my iPhone 4. I just got the new 5c and so did my partner. I created her a iTunes account on same laptop. I am logged into my iTunes, I try to sync and I get error message. It wont recognize my device. It shows my phone and all content on it. What's going on!!!!

https://discussions.apple.com/thread/4028664?tstart=0

I get an internal device error when trying to sync my iphone 4

Every time I connect I either get a message from iTunes that it doesn't recognize the phone or it tries to sync it and can't ending with an internal device error message.

I had the same problem. I got it working a few hours after setting up the account. Go to the firefox button and click sync now. This solved the "Failed Server Lookup" issue for me.

Error when trying to download Flash Player Update for Firefox

Hello,
I am having a issue while trying to download 11,5,502,135 for Firefox on the destop.. keep getting the errror message (have the same issue while trying to use IE) .. I currently have version 1,5,502,110 on the desktop and works just fine.. been having this issue for some time trying to download 135..have tried everything that Adobe suggested but to no avail... I do have 11,5,502,135 downloaded on the laptop, same company, same system, same browser, same setup...the only difference the desktop has Norton, the laptop has AVG... but Norton don't seem to have a issue with the update...
Any suggestions?...
Larry Woller

Hello,
I was getting a script error..I had been to the website that you had posted and tried several suggestions.. this time I went to the site and used the " Flash Player Plugin (For all other browsers)" and for the first time I got a popup saying something to the effect "will finish installation when Mozilla closes).. in the past I would leave the website to access the Flash player download and the Firefox download window open and apparently the player installer and Firefox were having a conflict.. I closed Firefox and the download window and the download continued and was successful.. will have to add that to my notes, make sure Mozilla is closed once I get the Save window before downloading Flasy Player...
Thanks for your prompt reply and help...
Larry Woller

Error when trying to email report using Analyzer for Excel template

I have a report for which I have created both "RTF" and "Analyzer for Excel" based templates. I can email the report using the RTF template, but when I try to email it using the A4E template (using the 'Send' button from the report screen), it never arrives. If I schedule the report to be emailed, it fails, and I get the following error information:
oracle.apps.xdo.servlet.scheduler.ProcessingException: oracle.apps.xdo.servlet.data.DataException: Invalid format requested: html
     at oracle.apps.xdo.servlet.scheduler.XDOJob.generateReport(XDOJob.java:959)
     at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:404)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
Caused by: oracle.apps.xdo.servlet.data.DataException: Invalid format requested: html
Ideas?

HI,
Is this qury is running fine in SQL?? Have you checked this query in Sql server(Management studio) whether working or not??.
I feel there is some mismatch with relations in query.. Cross check your query once in SQL itself. once it is running well, we will take a look.
Regards,
Salah.

Error when trying to issue a grant statement for Scott's emp table

I'm trying to complete a lab assignment in which we have to grant the select on Scott's emp table. Here is the statement I used. I'm wondering why did i receive the error that the table doesn't exist.
SQL> GRANT SELECT ON SCOTT.EMP TO DEV;
GRANT SELECT ON SCOTT.EMP TO DEV
ERROR at line 1:
ORA-00942: table or view does not exist
Edited by: user566571 on Dec 4, 2009 8:19 AM

Are you the owner of the emp table ? If not then
Do the user(which you are using to grant the privilege) has GRANT ANY PRIVILEGE or GRANT ANY OBJECT PRIVILEGE privileges ?
Do the user has been granted the appropriate privileges on the SCOTT.EMP WITH GRANT option ?
To grant the privileges to the role, first your user should have those privileges and that with the option to grant to others using WITH GRANT.

Invalid Credit Card Error when trying to change billing method (CC) for Adobe CC Subscription

It is not a card or browser issue. I will not call USA from BR. What is the alternative?

Hi daevemancreative,
Please refer the kb: http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html and contact our chat support in case of further issue.
Regards,
Romit Sinha

When trying to sync my iPhone with my MacBook Pro, I receive the error message "You do not have enough access privileges to update this device". How to I adjust the access privileges??

When trying to sync my iPhone/iPad with my MacBook Pro, I receive the error message "You do not have enough access privileges to update this device". How to I adjust the access privileges?

Hello magestecal,
Thanks for using Apple Support Communities.
To troubleshoot this issue where you're getting a permissions error when trying to sync your iPhone, I'd like you to please follow the steps in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Take care,
Alex H.

Error -5000 when trying to backup/update iphone

what is the error? and any advice on how to fix it?

I had the -5000 error when trying to update the iPhone 4 to the 5.0 OS. Make sure you do a Sync for your iPhone first. The following worked for me: disable all antivirus and firewall settings, then on the iPhone turn OFF the location services setting (Location Services is located in Settings). Now click update in iTunes. Hope this helps. Worked like a charm for me. Don't forget to enable your antivirus and firewall when you have finished updating the iPhone.

IChat Internal Error when trying to change own Buddy Icon

On my son's iBook G4 with OS 10.4.5 and iChat AV 3.1.1, he gets an error when trying to insert some JPG photos for his own Buddy Icon. It says:
iChat Internal error! NSInvalidargumentexception: * -[NSCFArray addObject:] attempt to insert nil
Also where are all your recent pictures stored??? Upon searching iChat Recent Pictures on my HD, it see they should be User>Library>Images>iChat Recent Pictures. However upon tyring to open that fiel, I get a message saying, "The alias 'ichat Recent Pictures' could not be opened, because the original item cannot be found." I can select delete alias, fix alias or ok. Might this also relate to my problem?

Hi Michael,
I pointed you to that thread as the error message you posted is normally associated with either a spellcheck problem or something odd with the Me Card in the Address Book.
You can drag pics to the Recent Buddies folder but iChat will not see them.
Create a New Folder and call it iChat Recent Pictures
The alias should be removed.
You should now find that iChat will let you select a choice as a new Buddy Pic.
This is done by clicking on the current Buddy pica nad selecting the "Edit Picture" option.
Then "Choose".
Navigate to the Pic and then resize as require.
Use the "Set" button.
This will convert the pic to a jpeg 2000 copy of the original and the Recents.plist which is needed within the folder.
You should now be good to go.
2:03 PM Friday; February 24, 2006

CUOM error when trying to poll performance data from IPCC Express

Hi Network Professionals,
Using CUOM 2.1 SP1 I get an error when trying to access the Performance menu for a IPCC Express Server in the Service Level View.
Error Message:
Performance polling is not supported for the current capability.
The server is fully monitored and I get enviroment, system, interface and application information.
I the Polling Parameters menu (Voice Utilization Settings) the only parameter listed is "Communication Manager and Registred MGCP Gateway Utilization".
The IPCC Express version is 5.0.(2)SR01_Build045.
Is anything missing on the IPCC server? I have only configured it with SNMP.
Kind Regards
Johnny Olsen

hi teresa.
well I bother you because I have a problem similar to that raised earlier, I have a vm INTAL CUOM 2.1 SP1 and the problem is that computers add-in-law his administration IPCC view the service level ... but when I fall into a custom group created the group and add the teams the same ip ipcc already visible, in my group I want to generate displays custom cloud but do not show me the equipment, except that I want to add IVR servers and I do not under any circumstances the samples .. lso probe and reset everything and anything related services, install the SP! and nothing. Can you help me with this or if I recommend CUOM up version of the 2.3 that I could not even see the difference with 2.1 CUOM thanks greetings

Error when trying to book an iPhone in for service (addrapi.08)

Similar Messages

Maybe you are looking for