Error when trying to chat with more than one perso...

I am getting an error when trying to chat with more than one person at a time.
The message is like below:
There has been an error while proccesing.
Do you want to start debugging.
Row: 0
Error: No authorization
Thank you in advance for assistance.
Kind Regards
Marcin
Attachments:
error.jpg ‏12 KB

What is the version of Internet Explorer installed on your computer?
In Internet Explorer go to Help -> About Internet Explorer.
P.S. Please, don’t say that you are not using Internet Explorer. This is irrelevant. Skype depends on Internet Explorer.

Similar Messages

I cant text chat with more than one person

I can normally text chat just fine, but when i try to invite more than one person to chat, i get the following error message
Couldn’t request chatroom “[screenname here] 619401”. (Your message is too long to be sent. Please shorten it.)
(obviously where it says screenname here, thats my screen. all lowercase letters, no spaces or weird characters.
the weird thing is if someone else invites me to a multi person text chat, it works just fine. i just cant initiate it. any suggestions???

Here is how I initiate a text chat.
(0) Click on one of my buddy names in my Buddy List to highlight it.
(1) ⌘ click on the next buddy I want to add to highlight him, too.
(2) Repeat the ⌘ clicks for all the other buddies I want in the chat.
(3) Click the "A" at the bottom of my buddy list to initiate the multiple-party chat.
Try that, and see if it works for you. If you can make it work for two, it should work for more.

Cannot chat with more than one person.

Running iChat AV 2.1, only text chatting via Rendevous in OSX 10.3.9. I can't chat with any more than one person. It sure would be helpful.
I've tried selecting two people and opening a new chat--I get the error message "Could not create chat with these participants". When more than one person is selected, the A button at the bottom is grayed out.What do I need to do?
PowerMac G5 Mac OS X (10.3.9)

Hi Barry,
Bonjour in iChat require that ports 5297, 5298 and 5353 are open in your routing device (if you have one)
I have seen this problem reported before. I do not know that there is a specific fix for this.
Ralph

How come its not letting me video chat with more than one people?

i've chatted before with more than 2 people on ichat but for some reason its not letting me. The plus sign will only show like 2 names meanwhile there are other people on my buddy list that i want to add not the ones in the plus sign. I've exited out of the chat i had with one person and went to the other person to make sure theres is working and it does. so why can;t i chat with 3 people then, and how to add them. If someone can help that would be great! Thanks!

Perthaps http://docs.info.apple.com/article.html?artnum=304486
and http://docs.info.apple.com/article.html?artnum=301050
play into this...
(if this solves your problem, or is actually helpful towards arriving at a solution to your problem, please consider clicking on either the gold or green star in order to mark this reply as "helpful" or "solved")

Error message when trying to log with more than a mobile account

Hi guys,
I face a very strange and worrying problem : when I log with a mobile account against my Snow Leopard Server, it works. But when I try to log with a second mobile using fast user switching, I have a strange error message saying that I can't connect with this user "at the moment". Once I log off from the first mobile account, I can log with the second one...
It is as if it is not possible to have two or more mobile/network accounts logged simultaneously on the same client. Is this a known problem ?
Thanks for your help,
Eric.

By design or not, this is a flaw, and a huge one ! I wanted to set up my home network so that each member of my family has a portable account. But this stupid design decision makes it impossible, since it makes impossible to have two or more users logged at the same time on a computer. So each time a member of my family wants to log on the family iMac, they have first to ask the previous logged member to log out !
How is that not a flawed design ? I don't even see what are the pros of that design decision ?

Error when exporting target groups with more than 10000 BPs using mail form

Dear experts,
we are working on 7.0.
we customized the communcation medium file export for the usage in campaigns.
Everything is working fine: the target group (<4000 BPs) is exported to a .csv-file and attached to the campaign.
As soon as number of BPs in the target group exceeds app. 9.000-10.000 the background job is executed successfully without errors, but no .csv-file is attached to the campaign.
Has anyone experienced the same? Soem hitns or solutions?
Thanks a ton and kind regards
Hannes

I don't think the character set is the problem. I used a string of numbers 0123456789 and just copied and pasted it repeatedly to build up the text. The database character set is WE8MSWIN1252.
Regarding the apache log. I have to admit that I don't even know if I'm running apache. I am using a newly installed Oracle XE on a laptop in order to get some experience with application express. This app is the first one I've done. If someone will direct me to the log then I'll be glad to check it and post the relevent contents.
I signed up for an apex workspace and intend to see if I can recreate the error from there so I can see if the problem is just in the free version of apex that comes with the Oracle Express Edition for windows database.

Can you video-chat with more than one friend at a time in new Hello?

Simply wondering if a group of people can video-chat together at same time, or just one-on-one?

It is currently only possible to have a peer to peer connection with one other computer.
To connect with multiple computer you would have to connect via a dedicated server and that is currently not possible with WebRTC.

Error while running spatial queries on a table with more than one geometry.

Hello,
I'm using GeoServer with Oracle Spatial database, and this is a second time I run into some problems because we use tables with more than one geometry.
When GeoServer renders objects with more than one geometry on the map, it creates a query where it asks for objects which one of the two geometries interacts with the query window. This type of query always fails with "End of TNS data channel" error.
We are running Oracle Standard 11.1.0.7.0.
Here is a small script to demonstrate the error. Could anyone confirm that they also have this type of error? Or suggest a fix?
What this script does:
1. Create table object1 with two geometry columns, geom1, geom2.
2. Create metadata (projected coordinate system).
3. Insert a row.
4. Create spacial indices on both columns.
5. Run a SDO_RELATE query on one column. Everything is fine.
6. Run a SDO_RELATE query on both columns. ERROR: "End of TNS data channel"
7. Clean.
CREATE TABLE object1
id NUMBER PRIMARY KEY,
geom1 SDO_GEOMETRY,
geom2 SDO_GEOMETRY
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM1',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM2',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO object1 VALUES(1, SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(550000, 450000, NULL), NULL, NULL));
CREATE INDEX object1_geom1_sidx ON object1(geom1) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
CREATE INDEX object1_geom2_sidx ON object1(geom2) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE' OR
SDO_RELATE("GEOM2", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
DELETE FROM user_sdo_geom_metadata WHERE table_name = 'OBJECT1';
DROP INDEX object1_geom1_sidx;
DROP INDEX object1_geom2_sidx;
DROP TABLE object1;
Thanks for help.

This error appears in GeoServer and SQLPLUS.
I have set up a completly new database installation to test this error and everything works fine. I tried it again on the previous database but I still get the same error. I also tried to restart the database, but with no luck, the error is still there. I geuss something is wrong with the database installation.
Anyone knows what could cause an error like this "End of TNS data channel"?

I am using iPhoto 11 mail and cannot add more than one recipient in the 'to' line. When I put a comma in, the recipient's address is deleted. If I use ' ' with more than one recipient the save grays out. Any thoughts?

am using iPhoto 11 mail and cannot add more than one recipient in the 'to' line. When I put a comma in, the recipient's address is deleted. If I use '< >' with more than one recipient the save grays out. Any thoughts?

I figured it out. I needed to fix some errors in my account information. It works fine now.

Bugged audio playback? When I start working with more than 1 audio track.

Hi!
I have been using premiere elements 12 for editing FullHD videos.
Brand new for me just bought it like 2 weeks ago.
Now during the last couple weeks I have had this MAJOR proglem with editing the audio.
This problem is headache and turns my simple editing into almost impossibilites.
I have had this problem with all my projects. _ALL_
Usually the problem seems to appear when I want to start working with several audio tracks.
At somepoint my projects just get ruined, I simply cannot hear the audio tracks.
The audio starts to disapear randomly from all the audio tracks.
It is not only playback problem. When I exported the video, the audio was partly missing, same as the project.
I have tried to look help on forums and search all what I could find, but havent been able to solve this.
Small fix has slightly helped:
I export audio to single track and bring it back to project. This works but I still usually have more editing to do.
I simply cannot understand why the playback disapears, I fear it is a bug.
I found lot of earlier version problems on people with similar type of problems, but no help for this version of program.
To solve the matter I have changed my audio setting in PE12.
Tried Premiere Elements WDM Sound and ASIO4ALL V2, but same problem on both.
I have looked up that my audio playback device and PE12 matches, and are not muted, and volumes maxed.
I have deleted my C:\ appdata\roaming\adobe premiere elements & premiere elements 12 folder preferences.. not helping..
I press the update pretty much everyday hoping for new version.. But yes, program keeps telling me its the latest.
I usually only work with 3 audio track maxinum. And I am doing really the most basic stuff here..
I have set all my audios to foreground and it has given me best results, but it does not seem to take the problem away as at somepoint randomly my audio playback is missing again, randomly across the playback.
Please anyone? I am feeling hopeless here.
Info on my computer:
Operating system: Win7
Processor: AMD Phenom(tm) x4 955 processor 3.20 GHz
memory (RAM): 4GB
system: 64bit
<moved from downloading, installing, setting up forum by mod- kglad>
Message was edited by: kglad

First of all, thank you for replying my message!
I will go and try to answer best I can.
Source media properties:
Progressive frame rate, I record this from a game.
Recording program: dxtory
codec: Lagarith Lossless codec
Format: avi
Frame width: 1920
Frame height: 1080
Data rate: 1990656kbps
total bit rate 1992192kbps
Frame rate 30/frames/seccond
Audio of video properties:
Codec: PCM
Format: 16bit, stereo
Bit rate: 1536kbps
Channels: 2(stereo)
Audio sample rate 48 kHz
In addition to that I use wav files for music and narrate
Music files sizes 20-50mb
bit rate: ~1411kbps
In total sizes of audio involved is usually something like 300mb
What are you or the program setting as the project preset in the new project dialog. See Edit Menu/Project Settings/General and its Editing Mode, Timebase, and Frame Size readings.
I opened new project and this is what i got:
Editing mode: HD 1080i
Timebase: 25,00 frames/second
Frame size: 1920 x1080
Audio is 48000 Hz
(I dont know how to change these, btw. Program don't seem to let me change editing mode.
I also looked up my most recent project and found these settings:
Editing Mode: DSLR
Timebase: 30,00 frames/second
Frame size: 1920 x1080
..and same audio settings
Do the problems persist if you start a new project? Do you find the audio problems develop when the Timeline content is fairly well developed or can the problems occur when there a minimal amount of content of those tracks? Let us look at the size and duration of this project.
Yes, I have had this problem with all my projects. Sometimes it goes away tho, just enough for me to work bit more. My work progress usually starts by clipping the video material, like 1h material to 8minutes in clips. After that I want to work with audio tracks, and here problems start! When I start working with more than 1 track, so the problem is at later stage. To fix the problem a small fix I have used, I export audio like music and effects tracks together to 1 wav and bring it back. After that, I start working with narrate track. To describe the problem with audio:
Audio Randomly starts to disapear when I playback, and can also be gone if I export the video out.
My source videos total size are usually within 80Gb max limit and audio edit material 300mb total.
In my last project my biggest source video was 47GB and leingth of 1h 4m, in addition to that I had 3 smaller videos, sizes of 1GB, 1,54GB and 300MB.
Is there any evidence that you are accidentially moving the audio track rubberband to alter the audio volume. That rubberband is the orange line that runs horizontally through the middle of the audio clip when you are looking at the wave form display style of that audio track. The rubberband represents audio volume.
No, audio volumes might have been adjusted in my tracks but they are present. The problem is usually like ~2-5seconds, a random audio track can be heard (like music or narrate) or just no sounds at all. This makes it very difficult to work with the audio. Also I gotta say that this problem starts by simply having the 2-3 audio tracks.. In my recent project the only adjustment I used to edit the audio was fade in/out.
I don't have any other audio problems with any other programs.
I am more than happy to provide more information if needed. I hope this information helps.
In addition I can say that when I close Adobe Premiere Elements 12, it crashes. No idea why.
I have also looked up my firewall settings, anything involved adobe and premiere..
In addition some effects like HD text templates make "Adobe Media Core CS6" crash. I tend to just not use em, or if I need em, I add em at end of the edits.
I hope this helps, I would really like to solve this problem.
Thank you alot for taking the time to answer! I welcome anyone to help mee too! Please giev links to similar problems too. Thank you everybody!

When I import a cd with more than one artist iTunes separates each individual artist - how do I get it to show the album as a whole rather than individual artist?

When I import a cd with more than one artist itunes shows each artist's song separately and won't group the album as a whole - this is incredibly frustrating something that Windows media player doesn't do. Does anyone have a simple cure for this annoyance?

Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2

Does Hotmail have an attachment size limit? When i attach something with more than 3mb in the mail it isn't send. It gives a resize option.

Does Hotmail have an attachment size limit? When i attach something with more than 3mb in the mail it isn't send. It gives a resize option.

Hi. Txs. The problem is that in my pc the limit size is 25mb. But in my ipad the mail only sends files under 3mb.

I have a mac book pro and when I turned on iChat it would not let me video chat with more then one person even though I was able to in the past. It only showed an icon to video chat with one person. Please help!!

I have a mac book pro and when I turned on iChat it would not let me video chat with more then one person even though I was able to in the past. It only showed an icon to video chat with one person. Please help!!!! ASAP

Hi,
Check the iChat Menu > Preferences > Video Section > Bandwidth setting.
iChat needs to see a Minimum of 128kbps to do 1-1 chats in Video
For 3 and 4 way chats it needs 384kbps
Set the Bandwidth to 500kbps if it is set lower.
Also check the speed you are getting from your Internet supplier.
9:28 PM Thursday; February 23, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

When texting with more than one person at a time the incoming text scrolls to top of the conversation. anyone out there with the same issue?

while texting with more than one person at a time the incoming texts scrolls to top of conversation. anyone having this issue?

I've heard claims it can be done, claims some have done it, and claims that it didn't work for them. This thread is interesting, some indications it should be possible, complaints that it didn't, and also an interesting work-around:
"How do I text message multiple people at once?"
http://discussions.apple.com/click.jspa?searchID=-1&messageID=4822260
You can ask Apple for iPhone changes via this link:
http://www.apple.com/feedback/iphone.html
Though if you're requesting hardware changes for iPhone v2 you may want to wait a week (or a month?)...they're probably going to be inundated right now by requests for software changes to the current iPhone.
(If this has answered your question, please mark your original post as answered)

Tax code with more than one tax rate

Hi,
I am using TAXINN procedure and I created on tax codes with more than one rate. i.e. for service tax I created a tax code S1 with 3 rates as follows
Acc. Key    Tax %      condition type
VS9            12             JSE4
VS0              2             JES4
VSS              1             JHS4
When I am trying to post a document with the above tax code the system is giving the following error message
Tax code S1 may only contain one assignment line
Message no. FF731
Diagnosis
For direct postings to tax accounts, only tax codes containing exactly one tax line may be used. Tax codes with several rates or a nondeductible portion are not allowed here.
Procedure
Use a different tax code.
For direct postings to a tax account, you might have to define a separate tax code for which only one line with a percentage rate other than zero is active in percentage rate maintenance. All other lines must be inactive.
To do this, choose Maintain entries (F5).
Could you please let me know how to rectify this problem? I want to post 3 line items for each of base rate, Edu. Cess and Higher Edu.cess.
Advance thanks for your help and
Regards
Koteswara Rao Padarti

The problem is in the master data of the revenue account. the tax category should not be > and it should be *

Error when trying to chat with more than one perso...

Similar Messages

Maybe you are looking for