Error when trying to configure Manage Data Refresh

Hello,
I recieve the following error when clicking on the "Manage Data Refresh" button:
" Cannot make a cache safe URL for filename "1037/styles/powerpivot.css", file not found. Please check the file in the layout library".
I'll really appreciate any help
thanks,
Eron.

Hi Eron,
We can get PowerPivot Configuration tool if we install SQL Server PowerPivot for SharePoint successfully. Have you following the steps to configure the PowerPivot for SharePoint environment in the article below?
Install PowerPivot for SharePoint:
http://technet.microsoft.com/en-us/library/ee210708.aspx
Furthermore, PowerPivot for SharePoint must be configured before it can be used. After you install PowerPivot for SharePoint using SQL Server Setup, you can configure it using any of the following approaches:
PowerPivot Configuration Tool or PowerPivot for SharePoint 2013 Configuration tool
SharePoint Central Administration
PowerShell cmdlets
Please take a look at the following article:
http://technet.microsoft.com/en-us/library/ee210708.aspx
Regards,
Elvis Long
TechNet Community Support

Similar Messages

CUOM error when trying to poll performance data from IPCC Express

Hi Network Professionals,
Using CUOM 2.1 SP1 I get an error when trying to access the Performance menu for a IPCC Express Server in the Service Level View.
Error Message:
Performance polling is not supported for the current capability.
The server is fully monitored and I get enviroment, system, interface and application information.
I the Polling Parameters menu (Voice Utilization Settings) the only parameter listed is "Communication Manager and Registred MGCP Gateway Utilization".
The IPCC Express version is 5.0.(2)SR01_Build045.
Is anything missing on the IPCC server? I have only configured it with SNMP.
Kind Regards
Johnny Olsen

hi teresa.
well I bother you because I have a problem similar to that raised earlier, I have a vm INTAL CUOM 2.1 SP1 and the problem is that computers add-in-law his administration IPCC view the service level ... but when I fall into a custom group created the group and add the teams the same ip ipcc already visible, in my group I want to generate displays custom cloud but do not show me the equipment, except that I want to add IVR servers and I do not under any circumstances the samples .. lso probe and reset everything and anything related services, install the SP! and nothing. Can you help me with this or if I recommend CUOM up version of the 2.3 that I could not even see the difference with 2.1 CUOM thanks greetings

Error When trying to load master data 0material

Hi,
I got the following error when trying to laod 0MATERIAL master data
"value '000000000004343434 ' for characteristic 0MATERIAL is in external format "
"0MATERIAL : Data record 1 ('000000000004343434 '): Version '000000000004343434 ' is not valid
Can anybody help me in resolving this issue.
Regards

Hi,
Run transaction OMSL.
Create an entry for MATCONV in the overview screen.
Double click on this line and set the length parameter for MATCONV.
the same transaction exists in the r/3 OLTP system compare the 2 systems to set the right values in the details screen in BW.
Hope this helps
Provide points if it does.
Regards
Lalan

I'm getting a 'The Management Pack element is not declared' error when trying to import CSV data into my *extended* WindowsComputer class

Background:
I have a class called SUS_WindowsComputerMP, that is an extension of the Microsoft class, Microsoft.Windows.Computer
I'm trying to import CSV data into this extended class and to the base class as well.
Question:
What am I doing wrong? I have a feeling that the Import CSV Format file is different for importing data into *extended* classes like mine, because the XML structure below would work for non-extended classes.
"...Creating new CSVImporter
Data Filename: D:\Peter\CMDB II\Exported MPs\TestMPs\SUS_WindowsComputer.csv
Format Filename: D:\Peter\CMDB II\Exported MPs\SUS_WindowsComputerMP.xml
Validating against XSD schema...
The 'ManagementPack' element is not declared.
Validation completed.
Format file D:\Peter\CMDB II\Exported MPs\SUS_WindowsComputerMP.xml contains an invalid root element. Expected: root node with name \"CSVImportFormat\"
Could not initialize a Management Object Creator from format file D:\Peter\CMDB II\Exported MPs\SUS_WindowsComputerMP.xml. Import thread exiting.
My import format XML is this:
<CSVImportFormat>
<Class Type="ClassExtension_a3ae3e0f_d578_43dc_aa3e_9037a094763c" >
<Property ID="WindowsServerID" />
<Property ID="PrincipalName" />
<Property ID="NetbiosComputerName" />
<Property ID="IPAddress" />
<Property ID="NetbiosDomainName" />
<Property ID="DNSName" />
<Property ID="OSVersionDisplayName" />
<Property ID="SerialNo" />
<Property ID="ServerDescription" />
<Property ID="AssetTagNo" />
<Property ID="ServerNameRow" />
<Property ID="ChassisType" />
<Property ID="InstallDate" />
<Property ID="IsVirtualMachine" />
<Property ID="BusinessUnitCustomersEnum" />
<Property ID="RegionLocationEnum" />
<Property ID="OtherFunctionRoleEnum" />
<Property ID="ProductTypeEnum" />
<Property ID="ObjectStatus" />
<Property ID="AssetStatus" />
<Property ID="CriticalityEnum" />
<Property ID="EnvironmentEnum" />
<Property ID="CostCodeClassEnum" />
<Property ID="DataClassificationEnum" />
<Property ID="Manufacturer" />
</Class>
</CSVImportFormat>

Hello,
Can anyone please help me out with this weird issue.
thanks,
orton

Error when trying to enter time data for hourly employees using CAT2

Hi Experts!
I'm trying to enter time data for an absence type using CAT2 for hourly employees and it's giving me an error saying "for attendance type, function or/and one of the URA is required".
I'm not sure what that means, the system has no functions available. Entering time data for full-time salaried employees is working just fine.
Any insight would be greatly appreciated!
Thanks.

hI,
Firstly check infotype 0315
In that check sender cost centre
Next chek whether the Attendent / Absende Tyep which you are trying to enter is configured
That meas it should pop up (F4) when u try to enter using CAT2
in the Attnendence /Abence field
REWARD POINTS

ORA-24327 error when trying to configure Oracle JDriver 2.0 on Commerce Server 3.5 SP1 on WLServer 6.0 SP2

When I try to install and configure the Oracle JDriver v.2.0 to work with Commerce
Server 3.5 SP1 and WebLogic Server 6.0 SP2, on starting up the commerce server,
I get the exceptions that follow this message. I cannot run the dbping utility
because it says it cannot find the BEA license file to verify that JDriver is
licensed for use. I looked over previous discussion threads on this particular
Oracle error, and the problem in the previous cases appears to have been use of
the wrong TNS name. I am referencing the same TNS name that is in my server's
tnsnames.ora file. I can connect to the database using SQLNet and the same connection
parameters that I have set up in weblogic. My Oracle home directory is set to
the directory just above the client install. I am trying to configure Commerce
Server on a Sun SPARC system running Solaris 8. Any help would be greatly appreciated.
Thanks,
Jon Morgan
---------- LOGIN ERROR CODE: 24327
java.sql.SQLException: Error while trying to retrieve text for error ORA-24327
(WEBLOGIC/********@ARBR.intelixinc)
at weblogic.db.oci.OciConnection.getLDAException(OciConnection.java:161)
at weblogic.jdbcbase.oci.Driver.connect(Driver.java:92)
at com.beasys.commerce.axiom.contact.security.RDBMSDelegate.init(RDBMSDe
legate.java:194)
at com.beasys.commerce.axiom.contact.security.RDBMSDelegate.<init>(RDBMS
Delegate.java:139)
at com.beasys.commerce.axiom.contact.security.RDBMSDelegate$DFactory.get
Instance(RDBMSDelegate.java:975)
at com.beasys.commerce.util.Pool.<init>(Pool.java:37)
at com.beasys.commerce.axiom.contact.security.RDBMSRealm.<init>(RDBMSRea
lm.java:127)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:237)
at weblogic.security.acl.Realm.getRealm(Realm.java:84)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:265)
at weblogic.security.SecurityService.initialize(SecurityService.java:123
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:343)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
at weblogic.Server.main(Server.java:35)
<Aug 7, 2001 11:50:29 AM EDT> <Emergency> <Server> <Unable to initialize the ser
ver: 'Fatal initialization exception
Throwable: java.lang.IllegalAccessError: com.beasys.commerce.axiom.contact.secur
ity.RDBMSException: realm initialization failed, action 'Driver.connect', - wit
h nested exception:
[java.sql.SQLException: Error while trying to retrieve text for error ORA-24327
- (WEBLOGIC/********@ARBR.intelixinc)]
java.lang.IllegalAccessError: com.beasys.commerce.axiom.contact.security.RDBMSEx
ception: realm initialization failed, action 'Driver.connect', - with nested
ex
ception:
[java.sql.SQLException: Error while trying to retrieve text for error ORA-24327
- (WEBLOGIC/********@ARBR.intelixinc)]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:265)
at weblogic.security.SecurityService.initialize(SecurityService.java:123
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:343)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
at weblogic.Server.main(Server.java:35)
'>
The WebLogic Server did not start up properly.
Exception raised: java.lang.IllegalAccessError: com.beasys.commerce.axiom.contac
t.security.RDBMSException: realm initialization failed, action 'Driver.connect',
- with nested exception:
[java.sql.SQLException: Error while trying to retrieve text for error ORA-24327
- (WEBLOGIC/********@ARBR.intelixinc)]
java.lang.IllegalAccessError: com.beasys.commerce.axiom.contact.security.RDBMSEx
ception: realm initialization failed, action 'Driver.connect', - with nested
ex
ception:
[java.sql.SQLException: Error while trying to retrieve text for error ORA-24327
- (WEBLOGIC/********@ARBR.intelixinc)]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:265)
at weblogic.security.SecurityService.initialize(SecurityService.java:123
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:343)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception

Wrong Forum, you want the APEX LISTENER support forum, this is the APEX support forum..
Thank you,
Tony Miller
LuvMuffin Software

Error when trying to start managed server from node manager

I have a managed server which is authenticated through a WeblogicAuthenticProvider. When starting the managed server from command line I need to setup certain jars in the classpath in order to start it successfully. However when I try and start the managed server from a node manager, I receive the following error.
Any ideas as to what is going on are appreciated. Is there any way to force Weblogic Node manager to invoke the actual startManagedWeblogic.cmd when bringing up the managed server
Thanks
<Jun 5, 2006 9:21:05 AM EDT> <Info> <NodeManager@*.*:5555> <Starting Server TweCluster::TaxwareServer1 ...>
<Jun 5, 2006 9:21:07 AM EDT> <Info> <NodeManager@*.*:5555> <Server TweCluster::TaxwareServer1 started, process id = 3,012>
<Jun 5, 2006 9:21:11 AM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA WebLogic JRockit(TM) 1.4.2_05 JVM R24.4.0-1 Version ari-38120-20041118-1131-win-ia32 from BEA Systems, Inc.>
<Jun 5, 2006 9:21:12 AM EDT> <Info> <Management> <BEA-141140> <The managed server is going to contact the admin server at http://zeus3dev:7001 to check if there exists a running admin server at this URL.>
<Jun 5, 2006 9:21:12 AM EDT> <Info> <Configuration Management> <BEA-150017> <This server is being started as a dependent managed server.>
<Jun 5, 2006 9:21:12 AM EDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic XMLX Module 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647 >
<Jun 5, 2006 9:21:12 AM EDT> <Info> <Configuration Management> <BEA-150015> <Connecting to the administration server http://zeus3dev:7001 to retrieve the initial configuration.>
<Jun 5, 2006 9:21:16 AM EDT> <Notice> <Log Management> <BEA-170019> <The server log file E:\bea8.1\weblogic81\common\nodemanager\TaxwareServer1\TaxwareServer1.log is opened. All server side log events will be written to this file.>
The WebLogic Server did not start up properly.
java.lang.NoClassDefFoundError: com/taxware/twe/util/crypto/CryptoUtil
at com.taxware.twe.auth.server.GenericPrincipalValidator.<init>()V(GenericPrincipalValidator.java:41)
at com.taxware.twe.auth.server.WeblogicPrincipalValidator.<init>()V(WeblogicPrincipalValidator.java:38)
at com.taxware.twe.auth.server.WeblogicAuthenticationProvider.getPrincipalValidator()Lweblogic.security.spi.PrincipalValidator;(WeblogicAuthenticationProvider.java:188)
at weblogic.security.service.PrincipalAuthenticator.initialize(Ljava.lang.String;[Lweblogic.management.security.ProviderMBean;)V(PrincipalAuthenticator.java:154)
at weblogic.security.service.PrincipalAuthenticator.<init>(Ljava.lang.String;[Lweblogic.management.security.ProviderMBean;)V(PrincipalAuthenticator.java:262)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doATN(Ljava.lang.String;Lweblogic.management.security.RealmMBean;)Lweblogic.security.service.PrincipalAuthenticator;(SecurityServiceManagerDelegateImpl.java:581)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealm(Lweblogic.management.security.RealmMBean;Ljava.util.HashMap;)V(SecurityServiceManagerDelegateImpl.java:420)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.loadRealm(Ljava.lang.String;)V(SecurityServiceManagerDelegateImpl.java:700)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms()V(SecurityServiceManagerDelegateImpl.java:733)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(Lweblogic.security.acl.internal.AuthenticatedSubject;)V(SecurityServiceManagerDelegateImpl.java:876)
at weblogic.security.service.SecurityServiceManager.initialize(Lweblogic.security.acl.internal.AuthenticatedSubject;)V(SecurityServiceManager.java:734)
at weblogic.t3.srvr.T3Srvr.initializeHere()V(T3Srvr.java:822)
at weblogic.t3.srvr.T3Srvr.initialize()V(T3Srvr.java:670)
at weblogic.t3.srvr.T3Srvr.run([Ljava.lang.String;)I(T3Srvr.java:344)
at weblogic.Server.main([Ljava.lang.String;)V(Server.java:32)
Reason: com/taxware/twe/util/crypto/CryptoUtil

Found a workaround:
Manually, add PATH (and probably the other environment variables also) to
${WLS_HOME}/common/bin/commEnv.sh.

AS91 - AA660 Error when trying to post transaction data

Hi,
     I am getting error AA660 when migrating assets with transactions data.
     I am trying to post Acq Tx 331 (say £1000) along with Unplanned Depreciation Tx 640 (say -£80).
     The error implies that I have a negative NBV in all depreciation areas, even though the NBV is positive (i.e. £1000-£80).
     I can circumvent the problem by setting the Negative Val Flag in each Depreciation Area for the asset, but I have a big volume of assets and this should not be happening.
    Can anyone help?
Regards
Derek

Check the following notes
1) Note 723399 - Invest. support deprec./reval. area: Field XNEGA copied
2) Note 1025126 - Correct error messages from new depreciation calculation
thanks
G. Lakshmipathi

Error when trying to view siebel data from BI Publisher

Hi,
I am trying to view Siebel data in BI publisher via a web service (webservice definition is set to complex in BIP) but when I try to do this I receive the message 'Requested data type does not match with existing data type'.
I am using version 10.1.3.3 of BI Publisher and 8.1.1.2 of Siebel E Clinical.

hi teresa.
well I bother you because I have a problem similar to that raised earlier, I have a vm INTAL CUOM 2.1 SP1 and the problem is that computers add-in-law his administration IPCC view the service level ... but when I fall into a custom group created the group and add the teams the same ip ipcc already visible, in my group I want to generate displays custom cloud but do not show me the equipment, except that I want to add IVR servers and I do not under any circumstances the samples .. lso probe and reset everything and anything related services, install the SP! and nothing. Can you help me with this or if I recommend CUOM up version of the 2.3 that I could not even see the difference with 2.1 CUOM thanks greetings

List of values failure error when trying to use dynamic data values

Hi there,
I have a user who is experiencing problems when trying to use dynamic values in a report. Whenever he tries to insert dynamic parameters he gets the following error message:
Prompting failed with the following message: 'List of Values failure: Failed to get values. [Cause of error: Access is denied.] Error Source: prompt.dll Error Code: 0x8004380D
He even opened the sample report - prompting.rpt - that is included with CR and gets the same error.
We are using Crystal Reports XI Release 2 ver. 11.5.11.1470.
Any help would be appreciated.

Please excuse my ignorance of the product. I've had this problem dropped in my lap and I know practically nothing about Crystal Reports. In doing some digging it appears to me as if the BusinessObjects Enterprise software may not be installed properly, if at all. In the programs menu under the BusinessObjects XI Release 2 folder I see a BusinessObjects Enterprise folder, but the only icon listed in that folder is Software Inventory Tool.
Is the BusinessObjects Enterprise software a separate install from Crystal Reports or is it bundled together? I talked with the tech that did the install and he said that all he had was the Crystal Reports install media.

I get an "SSL" error when trying to configure my mail settings with Gmail.

I have been trying to configure Gmail on my IPod and I keep getting a message that it cannot connect with SSL. I did not have this problem on my old IPod, which I replaced recently. I restored the settings on my new IPod from a backup on my computer and everything else has been working fine except the mail. Has anyone else had a a problem with Gmail? Any way I can get around it?

- First try resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next, go to the GMail settings and turn off SSL. Try and then if necessary, turn it back on.

Error when trying to configure sync between Outlook 2003 and Blackberry Desktop Software 4.6

I am unable to configure the Blackberry Desktop Software (version 4.6) to sync with my Outlook 2003. I used to have an older version of the desktop software and it worked just fine. I got a new phone and updated the software and am unable to configure the sync. I get the following message when I try to configure it: "Runtime Error: folder is no longer part of the system data source or the folder could not be found."
Please help. I need these to sync.

HI and Welcome to the Forums!
I suggest trying a clean DTM uninstall:
KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
followed by reinstalling from scratch. You should be able to go to the latest v5.0 with Outlook 2003...it's available here:
http://na.blackberry.com/eng/services/desktop/#tab_tab_overview
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error when trying to configure Lync to be a partner application for Exchange Server 2013

When I attempt to run the Configure-EnterprisePartnerApplication.ps1 script I get the following error:
The address 'LyncEnterprise-ApplicationAccount@*.domain.com' is invalid:
"LyncEnterprise-ApplicationAccount@*.domain.com" isn't a valid SMTP address. The domain name can't contain spaces and it has to have a prefix and a suffix, such as example.com.
The error continues with some more things, but what I can't understand is why it is adding a *. after the @ when it is trying to create the account.
Any help would be appreciated, thanks!

Hi ADrake04,
I found that the script was configured as below:
$acceptedDomains = Get-AcceptedDomain;
if ($acceptedDomains -eq $null)
WriteError ("There is no accepted domain so user can not be created.")
$acceptedDomain = $acceptedDomains[0].Name;
if($UseDomainController -eq $true)
$user = New-MailUser -Name $username -DomainController $DomainController -ExternalEmailAddress $username@$acceptedDomain;
set-mailuser -Identity $user.Identity -HiddenFromAddressListsEnabled $true -DomainController $DomainController
else
$user = New-MailUser -Name $username -ExternalEmailAddress $username@$acceptedDomain;
set-mailuser -Identity $user.Identity -HiddenFromAddressListsEnabled $true;
WriteInformation ("Created User <$($user.Identity)> for Partner Application.");
return $user;
Please note the variable “$acceptedDomain”,
this is a very important point.
(Note: The acceptdomain is used in Exchange, and can be created in Exchange EAC )
Now what you need to do is to run the following command in Exchange Powershell and see the result.
$acceptedDomains
= Get-AcceptedDomain
$acceptedDomains[0].Name
If you see the result “*.Domain.com”, then you should check your Exchange Configuration.
Best regards,
Eric

Error when trying to set a date type edit field

Hi all
I have an edit text field in a form which is bounded to a date type
database field using dbDataSource.
When i try to set the edit text field value with Today's date by code.
I recieve an error message that the value which
i'm trying to set is not legal. the error number is [131-183].
I use the following code to set the edit field:
If oEditText.Value.Trim = String.Empty Then
            Dim strDate As String
            Dim sboBob As SAPbobsCOM.SBObob =
             oCompany.GetBusinessObjec(SAPbobsCOM.BoObjectTypes.BoBridge)
             rs = sboBob.Format_DateToString(Microsoft.VisualBasic.Today)
           strDate = rs.Fields.Item(0).Value.ToString().Trim()
Try
       oEditText.Value = strDate
Catch ex As Exception
    SBO_Application.MessageBox("error setting
current date: " & ex.Message)
End Try
End If
My question is how can i set the edit field with a valid value?

Hi!
When writing to EditText.Value you must always use the B1 "DB-Format" as String.
The following examples are assuming (it's a must!) that the EditText-Fields are bound to a corrosponding DataSource (Type Date, Price etc...)
MyDateEditTxt.Value="20080207"
MyPriceEditTxt.Value="1341.79"
The best of it: It's Windows and SBO-GUI-Language independent.
EditText.String must always be written with the format of the actual Language of the SBO-GUI, which can be changed by the user....
You may also have a look at my statements regarding these problems near the end of this thread:
[How to pass date value to an UDF;
Cheers,
Roland

ORA-12560 error when trying to do a data pump

I installed oracle 11g and was attempting to do a data pump from the dev machine to my computer however when I run the impdp command I get an ORA-12560: TNS:protocol adapter error.
A co-worker thought I might need to add a loopback adapter as that had been the only thing different from his machine where everything worked fine so I added the loopback adapter but it still didn't work. We thought maybe the adapter had to be in place first so I uninstalled the database and installed again but that also didn't work, I still get the same error message.
Any ideas on what I should try?
Thanks for any help you can give me.

user11340791 wrote:
Please check if the service for the database is running if you are working on windows....
I am on windows how do I check if the service for the database is running?? Sorry to need so much hand holding I'm pretty new at this.You can check it from My Computer->Right Click->Manage->Services . Check from there that the service for your database is started or not? If not than start it.
>
I forgot to mention that I do have my environment variable set, ORACLE_HOME to the path the bin folder is in and ORACLE_SID set to the database SID.You are on windows and on it, most of the times, its taken care automatically by the o/s itself.
HTH
Aman....

Error when trying to configure Manage Data Refresh

Similar Messages

Maybe you are looking for