Error when trying to connect to memory card on Officejet Pro 8600 in WLAN
Hi All,
Since I upgraded my MacBook Pro and iMac to Mavericks I can no longer access my memory card that is inserted to my HP Officjet Pro 8600. Connection is WLAN infrastructure. However I also tried the Wireless Direct connection (no router) but still I receive the same error message.
"There is a probelem connection to the server "192.168....". There are no shares available or you are not allowed to access them on the server. Please contact your system administrator to resolve the problem."
In order to access the memory card, via Go - Connect to server, I used the smb://192.168... as well as the cifs://192.168... but it fails in both cases. I still have another partition on the MacBook Pro with Mountain Lion and from there it works fine to access my memory card.
Anyone out there who has a clue what is wrong in Mavericks?
Not sure that Mavericks has a problem. I can still connect to the SD card mounted in my Canon MG6360 via wireless.
Not sure if the HP is the same but with the Canon I have to add a path after the network address - ex smb://IP_address/canon_memory. If I just enter the IP address then I cannot connect to the printer. Maybe there is a similar requirement with the HP?
Similar Messages
-
HP Device Not Found Error when trying to print or scan wireless- HP Officejet Pro L7590
Have had HP Officejet Pro L7590 All-In-One Printer for years. Always worked fine and I had no issues printing via wireless connection. Several months ago.. Possibly after a Windows 8 update. From Windows 8 to Windows 8.1 I have not been able to use the printers wireless feature. When I try to print or scan it shows the printer as offline. Also get an error message that tells me "HP Imaging device is not found". I can still print when connected to USB. Cannot scan or use features of the HP software suite. I have tried several times to correct. Reloading the software and drivers several times, but no success. I just tried again and was able to print the test page wireless, so got all excited and thought I fixed it. Then tried to print something and got the same error message I have seen in the past. I have talked to certain supports saying that it may be a firewall setting within Windows. Any other suggestions? Thanks
Hi @rfjones002,
Welcome to the HP Support Forums! I see you are not able to print or scan wirelessly to your HP Officejet L7590 and your computer running the Windows 8.1 Operating system. You get a 'Printer offline' or 'HP Imaging device not found' errors.
I would like you to start with the steps listed below:
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstall the Printer Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /unregister
and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /regserver
and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayerflashplayer/downloads.html
Perform a clean boot > How to perform a clean boot in Windows
Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
- Image source
Now you can go ahead and download and install the software here >
HP Officejet Pro Full Feature Software and Driver
If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
I upgraded to this printer from a 6500A Plus which allowed the SD card to be accessed with I.E. via the printer's IP address followed by "memory_card" The full syntax in my situation was http://192.168.0.111/memory_card The problem is that doesn't work on the 8500, and neither do other permutations I tried such as "memory", "memorycard", "SD" etc. Does anyone know what syntax works on the 8500, does anyone know why it can't be the same syntax for all? The setup and user's guide didn't touch this topic on the 6500 and neither do they on the 8500, and it's not in the extended FAQ's on the 8500, apparently I'm the only one asking, and my need is not that uncommon. Thanks in advance for your help. Dean
This question was solved.
View Solution.If you prefer to connect to the memory card in the printer from a DOS prompt ( cmd ) you can try the following
c:\ net use x: \\ipadress\memory_card
in my case it looked like this
c:\ net use z: \\192.168.1.10\memory_card
you might want to type the following command line first to be sure the drive letter you choose to use is not already being used.
c:\ net use
This should list all the file shared already connected to your PC -
I keep getting an unknown error when trying to connect to the store. I ran diagnostics and it says secure link to itunes store failed. I've tried all suggestions from apple and nothing will work.
Please HelpI received this email from Apple and this corrected the problem for me... I only had to reset the iTunes cache
1) Open iTunes
2) At the top menu, click File > Preferences (iTunes > Preferences on a Mac)
3) In the Preferences menu, click the Advanced tab
4) In the Advanced menu, you should see a button that says "Reset Cache". Please click this button. -
Getting Error when trying to connect to the Primavera database. PPM V7 SP3
Hi Guys,
Caused by: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'mailService' defined in class path resource [com/primavera/bre//com/primavera/bre/integration/intgconf.xml]: Invalid destruction signature; nested exception is org.springframework.beans.factory.support.BeanDefinitionValidationException: Couldn't find a destroy method named 'destroy' on bean with name 'mailService'
I have looked into the intgserver.jar under P6IntegrationAPI/lib and looked the com.primavera.infr.srvcs.MailServiceImpl.java and can see that there is no destroy method whereas it is defined in the com.primavera.bre.intergration.intgconf.xml as below
<!-- provides mail services -->
<bean id="mailService" class="com.primavera.infr.srvcs.MailServiceImpl" init-method="init" scope="singleton" destroy-method="destroy"*+>
<property name="adminManager"><ref bean="adminManager"/></property>
<property name="threadPool"><ref bean="threadPool"/></property>
<property name="settingsManager"><ref bean="settingsManager"/></property>
</bean>
I get the above error when trying to connect to the Primavera database. I use PPMV7 SP3 and I have installed the Integration API from EPPMV7 bundle.
My demo's are working fine.
Any help would be appreciated.
Thanks,
Kajal.Hi Marc,
I am using a userid (is an admin)
Using global login method and provided userid & password in integration settings.
In the machine profiles, provided userid, password and domin.
Not providing domain in weblogin.
With all the above I am still getting error "Could not authenticate the specified user. %0" for HFM application
And with the same settings I am not getting any error to connect to essbase cube.
Any suggestions?
Thanks
Krishna -
Errors when trying to connect CRM 7.0 to Enterprise Search
Hi!
I encountered 2 errors when trying to connect to a CRM 7.0 system as a backend system from Enterprise Search Cockpit.
The first error is related to ESH_INT_GET_TREX_DESTINATION with a message of ESH_OM_OBJ_MODEL_REP 517:
http://img39.imageshack.us/img39/9722/eserrors1.jpg
The second error is related to "Errors during data cluster import from remote system":
http://img97.imageshack.us/img97/7976/eserrors2.jpg
I don't know if these two errors are related, but any help or suggestions will be greatly appreciated!!
Thank you!
Regards,
Paul4.0 should be fine. My initial thoughts were on the script targetting a framework lesser than 3.5. Am bummed about the error cause in the line
ClientContext clientContext =
new ClientContext(client);
it just creates an instance of the ClientContext class. It should have nothing to do with permissions cause it is not even trying to connect to the sharepoint site. So it looks like it can't find the assembly. Can you place the asembly
under the Microsoft.Net\Framework folder of your machine. SSIS looks for custom assemblies in this folder on design time (Refer
this) Worth a try hey!
http://btsbee.wordpress.com/ -
Oracle Fatal error when trying to connect through sqlplus
Hi,
I am getting the below error when trying to connect to instance through sqlplus
Database version is :10.2.0.3
Operating system= Solaris Operating System (SPARC 64-bit)
OS version=5.10
[lscbd07p2*BMC]-\ORACLE>sqlplus
SQL*Plus: Release 10.1.0.4.0 - Production on Fri Nov 9 07:48:24 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: /as sysdba
ld.so.1: oracle: fatal: relocation error: file /u01/app/oracle/product/db/10.1.0.4/lib/libjox10.so: symbol kststop_: referenced symbol not found
ERROR:
ORA-12547: TNS:lost contact
Enter user-name:
Could you all please give me suggestions in order to solve this problem.
Thanks
MannuHave you recently patched/upgraded? This sounds like there might have been a problem relinking the executables / libraries, and/or a permissions problem. For example you may be referencing a 32 bit library with your 64 bit client.
I believe I recently read a similar case - check Metalink for this symptom.
HTH
Regards Nigel -
Keep getting sync service error when trying to connect my iphone 5S.
Keep getting sync service error when trying to connect my iphone 5S. It freezes itunes and I can't do anything else. I see that there is an update for my phone and I need to back up, upload new apps, etc before installing. I plug my phone in and get this error every time. I am using a Win 7 SP1
Howdy Susie48825,
It sounds like you are getting an error that mentions the sync services when you connect your phone to your computer and so you cannot sync your device. I would use the troubleshooting from the following article that mentions an error regardign the sync services named:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/ts2690
Start with these steps:
1. Check that iTunes is up-to-date
Ensure that you have updated to the latest version of iTunes.
2. Reset Sync History
Resetting your Sync History is a simple step which may resolve some syncing issues. If this works, iTunes will prompt to Merge or Replace the information on your device when you next attempt to sync. To reset your Sync History:
Disconnect your device.
Open iTunes.
From the Edit menu, choose Preferences.
Click the Devices tab.
Click the Reset Sync History button, and then reconnect your device.
If this resolves the issue, and you know all of your contacts, calendars, bookmarks and notes are on your computer:
Reset the Sync History again using the steps above.
Select the device in iTunes and click the Info tab.
Scroll down to the Advanced section, and under "Replace information on this iPhone/iPad/iPod touch" select Contacts or Calendars.
Click Apply.
If the issue persists, and you know all your contacts, calendars, bookmarks and notes are on your iPhone, iPad, or iPod touch:
Remove all of the contact and calendar information from Outlook.
Select the device in iTunes and click the Info tab.
Scroll down to the Advanced section, and under "Replace information on this iPhone/iPad/iPod touch" make sure Contacts and Calendars are not selected.
Click Apply.
There are additional steps to use in the article if needed, but these will get you started.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
ORA-12560: TNS:protocol adapter error when trying to connect
hopefully somebody can help me out... the problem i'm having is connecting to the scott/tiger database. i keep getting :
"ORA-12560: TNS:protocol adapter error" when trying to connect to it. it worked previously, but i unistalled oracle 8i personal and reinstalled it. now it doesn't let me connect. what's going on?
thanx,
uriahYou can run the net8 assistant to set up your tnsnames.ora file.
start/programs/oracle/network administration/net8 assistant
When you are done it should look something like this:
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(Host = )
(Port = 1521)
(CONNECT_DATA = (SID = ORCL))
Bev -
Why do I keep getting a connection error when trying to connect to SQL?
Environment:
LiveCycle ES2
Windows Server 2008
JBOSS
Oracle Application DB
When trying to connect to SQL, I get this error message in the log.
Exception: Could not create connection; - nested throwable: (java.lang.UnsupportedOperationException: Java Runtime Environment (JRE) version 1.6 is not supported by this driver. Use the sqljdbc4.jar class library, which provides support for JDBC 4.0.); - nested throwable: (org.jboss.resource.JBossResourceException: Could not create connection; - nested throwable: (java.lang.UnsupportedOperationException: Java Runtime Environment (JRE) version 1.6 is not supported by this driver. Use the sqljdbc4.jar class library, which provides support for JDBC 4.0.))
I have these two files located in \\jboss\server\lc_oracle_cl\lib
sqljdbc.jar
sqljdbc4.jar
I was told all I needed to do was drop these two files in the directory above and restart JBOSS. Is there something I'm missing?
JesseHi Jesse,
The driver you are using is for SQLServer Database. Since you are using Oracle as your database, you need an oracle driver.Please copy ojdbc6.jar from the [installDir]/lib/db/oracle/ directory and try again.
Thanks,
Ruchi -
Sql Server Web Edition Reporting Services errors when trying to connect to Windows Azure SQL
I am using a preconfigured image from the Azure VM Gallery to create a VM.
--> Sql Server 2012 SP1 Web running under Windows Server 2008 R2
After configuring Reporting Services I get the following error when trying to run a report that connects to my Azure SQL db.
An error has occurred during report processing. (rsProcessingAborted)
An attempt has been made to use a data extension 'SQLAZURE' that is either not registered for this report server or is not supported in this edition of Reporting Services. (rsDataExtensionNotFound)
On the VM using SSMS I can connect to the Azure SQL db. On the VM in Report Builder when I define a connection I get a similar error to the one above when I test that connection. I am using Microsoft Azure SQL as the data source type.
Interestingly in Report Builder, if I proceed past the connection definition, I can see the tables from my Azure SQL db in the dataset definition page.
One more note. If I use a different image from the Gallery (Sql Server 2012 Standard SP1 on Windows Server 2012) my report builder connection works and the reports run fine. I believe that the Azure documentation says that Sql Server Web edition
is an acceptable choice for the SSRS on VM for reporting.
Any thoughts or suggestions?
Thanks -- Tom ReillyHello,
A VM with SQL Server 2008 R2 or 2012 supports all Reporting Services features, including all supported data sources, customization and extensibility, and scheduled report execution and delivery.
Did you run the report in Report Manager,or preview the report in Report Builder? Which version of the Report Builder you installed in the Windows Azure VM? SQL Reporting does not support reports created from Report Builder 1.0 or 2.0. You can create reports
using Report Builder 3.0 and then upload the reports.
What's more, please also check the database source credential of the report.
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support -
Error when trying to connect in synch manager
Hi there,
When trying to connect to an administration in synch manager, an error appears: SBO Error #-111: Failed to Connect to SBOCommon
System:
SAP Business One 2007A PL42
SQL Server 2005
SAP Webtools 2007 PL 13
Kind regards,
Andy GrootensHello Andy,
Can you log in to this instance of business one normally?
Did you set the username and password to connect in the synch manager?
Have you recently changed the users password?
James -
'500 Internal Server Error' when trying to connect to Music Store
Does ANYBODY at Apple CARE that I've been writing posts for 2 WEEKS trying to get an answer to the reason why I can't connect to the Music Store? This is absurd!
Since upgrading to iTunes 6.0.3 (and now 6.0.5), I get a 'Music Store termporarily unavailable' message. I have the same PC, OS, and ISP that I've used to buy hundreds of dollars worth of your music - but since upgrading - I'm dead in the water. Norton is set to PERMIT i-tunes - but I get the same problem with Norton turned OFF.
When trying to connect to the Music Store via the following URL: phobos.apple.com/WebObjects/MZStore.woa/wa/storeFront
as suggested in other posts, I get a "Error 500 Internal Server Error" - which according to my ISP and Microsoft is on APPLE'S Server - not my end.
HELP HELP HELP!!!!
Dell Windows XP Pro
Dell Windows XP ProCheck whether your DBControl or ASControl service is still running or crashed. EM is not able to connect to the Management Server.
For instance in Windows, you may see that the Servise is not started. Then check for error logs in $ORACLE_HOME/sysman/logs for any related error messages in the log files -
Ive got data on my phone and its keep saying network error when trying to connect
Im trying to connect to internet when im out and about ive got data on my phone but it keeps saying network error when trying to connect
Hi there,
You may want to take a look at some of the troubleshooting steps found in the article below.
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
-Griff W. -
Logon Failed - Invalid element error when trying to connect to SalesForce
I had a working crystal reports database connection to salesforce until I installed a Crystal Reports update on my machine. It is currently running v12.2.0.290 (CR Developer).
Since the update when trying to connect, I enter my password and salesforce security token to get access to the database but now I receive an error that says:
Logon Failed
Details: Unexpected error
; nested exception is
org.xml.sax.SAXException: Invalid element in com.sforce.soap.partner.LoginResult - metadataServerUrl
Help is resolving this error would be appreciated.Hi Ron -- you have installed SP2 of Crystal Reports 2008. You will need to install the FP 2.2 as per this thread -- Crystal Reports 2008 SP2 update to the Salesforce.com connectivity
Let us know if this solved your problem.
Thanks,
Pete
Maybe you are looking for
-
How to find USB flash drive in FINDER if it doesn't appear
I inserted USB flash drive in MacBook Air, but cannot find it in FINDER, my operation system is OSX 10.9.4
-
How do pass the UserID and Password in the SOAP header for web services
I am encountering issues trying to pass the userid and password in the SOAP header when consuming a 3rd party web service. Rostewitz posted something similiar but I don't know how to type iv_xml. Any help would be greatly appreciated. Thank you, jp
-
Hi, Would you please check my account joesong668. I cant make the payment through paypal. Each time I paid, skype will reject the payment and refund me. Please let me how to solve this problem. Joe Solved! Go to Solution.
-
Has anyone with "error2131" been able to repair and burn a CD?
Has anyone with an "error2131" problem been able to repair and burn a CD? What did you do the achieve that? Just got the new drive and it performs perfectly in every way, except with itunes.... TSST corp CDDVDW SH-5202J
-
Nokia navigator 6110 prob sending texts please he...
i have a nokia nacvigator 6110 and it wont send texts i can recieve texts and send and recieve calls but i think i may have a virus if so how do i fix ive plugged into my laptop and run my norton antivirus but it doesnt find n e thing i tried spybot