Error when Trying to Copy or Import Data via Data Manager

Hello Experts,
I was trying to do an Import using the package in Data Manager and i Got this error:
[Admin-ProcessPartition]Errors in the OLAP storage engine: The attribute key cannot be found when processing: Table: 'dbo_tblFactAppname', Column: 'ACCOUNT', Value: '7061020702'. The attribute is 'AccountNom_ID1'
Also, I tried to do some Optimize in the Application and then a Copy from a Package and I still got this error.
Thanks for your help,
Rodrigo

Hi Rodrigo,
For every application, BPC creates 3 tables in the SQL.
1. FactWB<application> : writeback table - the data is stored whenever we send any data from the input schedules. This table is used for real term storage (the most current data sent to the system).
2. Fact2<application> : When we load data through DM packages, it gets stored in this table. Also called short term storage.
3. Fact<application> : Main data storage. All data eventually resides over here. Also termed long term storage.
Hope this helps.

Similar Messages

No response from Teststand when trying to copy a large 2-D data in Local context.

Attached is an example. When trying to copy a large 2-D data in local context "InOutArray", Teststand will run into no response. Is that a bug in Teststand?
Thanks!
Jacky

Oh......I made a mistake and forgot to attached the file.
Please see attached file and find the arrary in context of "Locals.InOutArray"
THANKS
JACKY
Attachments:
Write_Eeprom.seq ‏2596 KB

I get error message "unknown error" When trying to log on to itunes via pc, help please!

I get error message "unknown error" When trying to log on to itunes via pc, help please!

Hello, trolle56.
Thank you for the question. You may find these articles helpful in troubleshooting the error received with the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Cheers,
Jason H.

Error when trying to Cancel an invoice document via MR8M Transaction

Greetings Everyone,
l am having an issue when trying to cancel an invoice document via MR8M transaction. It gives me the following error message;
SYSTEM ERROR: error in routine MRM_DRSEG_CR_CREATE
Message no.M8008
Procedure:
Contact your system administrator.
This invoice was related to a check payment. The check has been voided already and there is no clearing document for the accounting document. So, the item remains open. However when l try to reverse, it display the error message above.
Thanks in advance

read notes 449277 and 750455, your solution is probably there.

Error when trying to copy files to external drive

When attempting to copy files to external hard drive I get a message " unable to copy some data, error code -36".
How do I find out what that error code is tring to tell me?

Sadly, I have had this issue as well. Last eyar Iit got to the point I couldn't copy at all. From what I recall, Apple told me it could be one of many things. A bad internal drive, bad permissions, a bad external drive, a bad firewire port, a bad cable, bad memory, and on and on. I never did figure it out, but I do know my hard drive did crash a month later. However, having said that, I own a new computer, and last week, it started again. Still have not figured out what is going on. Good luck.

Error when trying to copy a work area in Oracle designer

In oracle designer,I tried to copy a work area by selecting.
File-->>Change work area.
Then from the "Work area" pop up window,I selected the new option.
In the Create work area wizard i chose "Copy a work area" and gave the Name ,description and the work area to be copied.
When i click the finish button,I am getting the following error.
"CDR-01005: Workarea compilation failed: ORA-01422: exact fetch returns more than requested number of rows. "
Please let me know how to copy a work area in Oracle designer.
Thanks in advance.

Note 277801.1
Views Return Records From The Wastebasket.
Possible Symptoms
~~~~~~~~~~~~~~~~~
1) executing a SELECT FROM CI_... views return more rows than expected.
2) SELECT ... INTO ... FROM CI_... views raises error
ORA-1422: exact fetch returns more than requested number of rows.
3) Deleting an object from the repository fails with the following errors:
RME-00020: Internal API error -
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "<repos_owner>.JR_NAME", line 3680
ORA-06512: at "<repos_owner>.JR_NAME", line 4138
ORA-06512: at "<repos_owner>.JR_ERROR", line 193
ORA-06512: at "<repos_owner>.SDD_TAB_D", line 961
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-04088: error during execution of trigger '<repos_owner>.SDD_TAB_D'
NB: the name of the trigger (SDD_TAB_D in the above example) will vary
depending on the object type you are deleting
4) Compilation of a Workarea fails with the following errors:
CDR-01005: Workarea compilation failed:
ORA-01422: exact fetch returns more than requested number of rows.
Workaround
~~~~~~~~~~
For symptoms 1 and 2, define the context of a workarea before selecting from
the CI_... views:
exec jr_context.set_workarea ('<Workarea Name>');
For the other symptoms, the errors are caused by RDBMS bugs that were fixed
in the last patch set releases of databases.
We recommend that you upgrade to a version of the database that is certified
with the release of Designer that you are using.
See Note 60705.1 for details

Error when trying to copy Library

Get this error message when attempting to copy an Aperture library: "The Finder can’t complete the operation because some data in “2012” can’t be read or written. (Error code -36)" Other libraries duplicate easily, so not a RAM or system issue. Have done all three library first aid steps. What else can I try? Need to get this library onto my external as my internal is about full! Thanks for your help.

Have you also checked, if the external drive is formatted correctly? MacOS X Extended (Journaled)? If not, make sure it has the same file system as your internal drive and reformat the external drive, if necessary. Set the "Ignore Ownership on this volume" flag, if it is not set.
This I don't understand:
Thanks for the suggestion but still get the same message after individually copying all subfolders as you instructed in my 2012 library to verify individually.
So you could copy all folders individually; then there is no need to copy the complete library again.
The idea is to copy all folders from your library individually to another folder on your external drive, in exactly the same folder structure as the original library.
Then this folder will contain your transferred Aperture library. The last step would be to rename the enclosing folder "ApertureLibrary2012.aplibrary" and double click it to open it in Aperture and test, if it is working.
-- Léonie

Error When Trying to POST: Method not implemented in data provider class

Hi Experts,
I have created an Odata Service using Netweaver Gateway Service builder. I am using Advanced Rest Client to test the service. I can successfully GET my data, but I run into issues when I try and POST new data.
When trying to POST, I used the GET method to get the x-csrf-token, and added it to my header. I also updated the body XML with the data that I would like to POST. However, after sending the POST request, I am getting a "500 Internal Service Error" with the xml message "Method '<OdataServiceName>'_CREATE_ENTITY" not implemented in data provider class".
Any help on this would be greatly appreciated. Thanks!

Hi Kelly,
Can you share screenshots of the error? Maybe something wrong with payload :can you share the same also? Did you try to debug it by putting a breakpoint in the CREATE_ENTITY method in the backend? Any luck?
Regards,
JK

Error when trying to copy a job,BP_JOB_CREATE fuction modulecaled incorrect

Hello All,
Please help, this is a weird message and I have no idea what the error message means.
A user was trying to copy a job and got this error message:
Error message:
The background processing system was unable to copy the job . The failure occurred in the BP_JOB_CREATE function module and may be due to one of the following reasons:
1. The new job could not be created because of problems with the control tables of the background processing system. This error suggests that there are problems in the database system.
2. The BP_JOB_CREATE function module was called incorrectly. There is a programming error in the calling program.
The user does has authorization to copy and nothing has changed in her access.
I tried to copy the job and I was able to do, so was one more user from a different team.
I looked in ST22 and there are no messages generated by that user.
Please help, this is a production issue.
Thanks.

I got this issue resolved.
It was an authorization error.
We recently changed one of the job step owner and the step owner did not have authorization to copy jobs that belonged to different users.
Added the required role and the problem was fixed.

Undocumented error when trying to copy azure database (worked fine until recently)

Until recently executing
create database CB_Karakter_ACC as copy of jzv6wwe8gl.CB_Karakter_PRD
on azure instance bycz1k0pmu worked fine. Today, I'm suddenly getting
Msg 40197, Level 20, State 1, Line 65536
The service has encountered an error processing your request. Please try again. Error code 40184.
I cannot find any info relating to error code 40184 anywhere on the internet. What does this message imply?
FYI: Just did a backup of the PRD db with redgate cloud services (to azure blob) and tried to restore it on the test instance. I got msg:
Microsoft Restore Service returned an error: Error encountered during the service operation. Could not import package. Error SQL72014: .Net SqlClient Data Provider: Msg 15247, Level 16, State 100, Procedure sp_create_login, Line 1 User does not have permission
to perform this action. Error SQL72045: Script execution error. The executed script: CREATE LOGIN [CB_Karakter_PRD] WITH PASSWORD = '******';
So probably the 40184 has something to do with security. Would be helpful to add this msg to e.g. http:// msdn.microsoft.com/en-us/library/windowsazure/ff394106.aspx (put space behind first / since this txt box doesn't allow me to put in links since
my account is not verified or something...). If it's indeed about permissions that is.
Ok after executing
exec sp_addrolemember 'loginmanager','CB_SysAdmin_PRD'
the CREATE DATABASE...AS COPY OF stmt still resulted in the same error. Will now try redgate again...
Restore with redgate was succesful now. Question remains why CREATE DATABASE doesn't work anymore.

Hello,
Based on your description, you copy a database between two different SQL Database servers. When ACC database is copied form PRD database, the login that copied the database becomes the DBO of ACC. All database users and their permissions (but not their SIDs)
from PRD are copied to ACC. Because of the new SID, the login from the PRC sever may not work on the new database.
To workaround this issue, please try to use the DBO login and the ALTER USER statement to map users in the new database to logins on the new SQL Database server.
For example: ALTER USER 'CB_SysAdmin_PRD' WITH LOGIN='loginName'
Reference:
Copying Databases in Windows Azure SQL Database
Currently, I didn't find any document about error codes 40184 embedded within the message of error 40197. You can try to submit a feedback on the SQL Database feedback forum:
http://feedback.windowsazure.com/forums/217321-sql-database
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Error when trying to add entries to Default NTUSER.DAT

Hey can someone please help me out? I am trying to import a registry to the Default user NTUSER.DAT But it is giving me the message:
ERROR: Error opening the file. There may be a disk or file system error.
Here are my steps:
I export the key from:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Taskband
I then changed all of the test labled as HKEY_CURRENT_USER to HKEY_USERS\TEST
So the registry key has this.
HKEY_USERS\TEST\Software\Microsoft\Windows\CurrentVersion\Explorer\Taskband
I called it Taskband.reg
I then create and run as administrator a bat file with the following contents:
reg load HKU\TEST c:\Users\default\ntuser.dat
reg import taskband.reg
reg unload HKU\TEST
The registry loads and unloads fine I just get the above error message when it tries to import.
Let me know if you need more info.

Hi,
Could you please explain a bit for what you want to achieve here?
If we want to edit the default user profile settings in registry, we may follow the below article:
Tip 49: How Do You Set Default User Profile Registry Settings
Windows registry Hives have its own structure, the error that received might be caused by the wrong format.
For more information regarding Windows registry hives, please see:
Registry Hives
Best regards
Michael Shao
TechNet Community Support

Unknown error when trying to copy music from itunes to ipod

Message appears "copy to the disk IP failed unknown error -53. Any ideas?

good gracious, Dick. you keep getting hit by exotic error messages. (in these circumstances, a -53 code is reasonably rare.)
just checking on something. what got you past the "exception" message that you were getting when you were trying to launch itunes? (thinking here that info on that might possibly give us a heads up on what might be happening with your -53.)

Error when trying to copy media files on BB

Hi
Just got my first BB and it's the most amazing thing since Chuck Norris!!!
But I'm feeling very frustrated
I just can't seem to copy any media filed unto my BB, I keep getting errors....
I've installed the software and connected my phone, when asked to connect with "Mass storage" and said NO. I go into the Roxio application to manage media files. I chose the correct folders and when I select a file and click on the "Copy down" or "Copy down" button it gives for 3 options:
Convert for optical playback
Copy with no conversion
Advanced conversion options
Doesn't matter which one I choose it gives me the same error. It also doesn't matter if I choose "Device memory" or "Memory card". I keep getting the same error:
One or more of the following files could not be transferred
I might be doing something wrong because I'm still a BB virgin -Hope someone can please help )
Thanks!

Thanks
But I thought that when you chose Mass storage "YES" you cannot use the files on your phone?
aka access music files for ringtones, etc?
That's what I'm trying to do...

Error when trying to copy songs to iTouch

Hi,
I just bought an iTouch in addition to my iPod Classic. When I try to copy some some songs from my iTunes Library, which has about 15'000 songs, most of them work.
However, for some of them I receive an error message stating "Attempting to copy to the disc iTouch failed. The disk could not be read or written to"
Any idea why this is and some songs can not be copied ?
Many thanks for your help
Lenochka

Hey Lenochka,
Make sure the iPod is directly connected to the iMac and not plugged into a hub. Also, disconnect any other USB devices. http://support.apple.com/kb/ts1286
If you continue to see any the error, try the tips in this article:
http://support.apple.com/kb/HT1207
Jason

Error when trying to copy one of my folders, or compress it in the finder

When I try to copy one of my folders, or compress it in the finder, a window pops up with this message: "The operation can't be completed because an unexpected error occurred (error coded -8060)". It does not say which file or folder is the problem. I don't see anything relevant in the Console either.
Please advise, I need to back up that folder. It is where I keep Xcode projects

I found some subdirectories within my Project folder that were complete duplicates of other directories. After deleting those, I no longer had the error. I don't know where they came from, but think they may have been created after an upgrade, say from Xcode 3.0 to 4.0 but don't remember. Anyway, don't know any more about it, only that it went away after I deleted those duplicate subfolders. Good luck !

Error when Trying to Copy or Import Data via Data Manager

Similar Messages

Maybe you are looking for